IAF MD 5 Audit Time Calculator

Free certification audit time calculator and practice: IAF MD 5 audit days for ISO 9001, ISO 14001 and ISO 45001, plus the IAF MD 1 multi-site sample. Every figure comes with its table row or clause, and the practice names your slip.

Mode

MD 5 Issue 4, MD 1 Issue 3

The client
Table QMS 1, in part

Audit days for Stage 1 + Stage 2.

Results

Practice

The certification body sets and records the size of any adjustment (MD 5 clause 8). Reductions stop at 30%.

The working

    Check your answer to see the working.

    Practise the exams

    Preparing for a lead auditor exam? Start with the free real exam questions, then get the full pack.

    PECB ISO 9001 Lead Auditor107 real exam questions · US$39
    Free: 31 questionsGet the full pack
    PECB ISO 45001 Lead Auditor106 real exam questions · US$39
    Free: 5 questionsGet the full pack

    Audit time FAQ

    How are audit days worked out under IAF MD 5?

    Start from the effective number of personnel in the scope of certification, read the initial audit time (Stage 1 plus Stage 2) from Table QMS 1, EMS 1 or OH&SMS 1, then adjust for the factors that apply to the client. For ISO 14001 and ISO 45001 the table time also depends on the complexity category. MD 5 says the tables cannot be used in isolation, and the certification body has to record the audit time and the reasons for it.

    How do part-time staff and shifts count?

    Part-time personnel are converted to full-time equivalents by the hours they work. MD 5 gives the example that 30 part-time personnel working 4 hours a day equate to 15 full-time personnel. The effective number includes the personnel working on each shift, and non-permanent personnel such as contractors when they are within the scope. Seasonal operations use the personnel typically present in peak season.

    How long is a surveillance audit?

    During the initial three-year cycle, MD 5 says the time spent on surveillance each year should be about 1/3 of the time spent on the initial audit. A client whose initial audit took 7 days gets about 2.5 days a year. MD 5 notes that a surveillance audit is unlikely to last less than one audit day, and the planned time is reviewed at least at every surveillance and recertification audit.

    How long is a recertification audit?

    Normally about 2/3 of the time an initial audit of the organization would need if it were carried out at the time of recertification. MD 5 is explicit that this is not 2/3 of the time spent on the original initial audit, so a client that has grown or shrunk is worked out again from its current figures.

    How much can audit time be reduced?

    By no more than 30% of the time in Table QMS 1, EMS 1 or OH&SMS 1 (MD 5 clause 3.9). Clause 8 lists what can justify less time, such as a mature management system, a very small site for the number of personnel or, outside ISO 45001, a high level of automation. MD 5 sets no percentage for any single factor: the certification body weighs them, may offset them against factors that add time, and records its decision. For the sampled sites of a multi-site organization, IAF MD 1 allows up to 50% less per site.

    What adds audit time?

    MD 5 clause 8 lists, for every standard: complicated logistics with more than one building or location, staff speaking more than one language, a very large site for the number of personnel, a high degree of regulation, highly complex processes or many unique activities, and temporary sites that have to be visited. ISO 9001 adds high risk activities and outsourced processes. ISO 14001 and ISO 45001 have lists of their own, such as a sensitive receiving environment or an accident rate above the sector average.

    How are part days rounded?

    To the nearest half day. MD 5 gives two examples: 5.3 audit days becomes 5.5, and 5.2 becomes 5.

    How many sites are audited in a multi-site certification?

    Where the sites do very similar work and sampling is allowed, IAF MD 1 sets the smallest sample at the square root of the number of sites for the initial audit, 0.6 times the square root each year in surveillance, and the initial figure again at recertification, or 0.8 times the square root where the system has proved effective over the cycle. Each result is rounded up to the next whole number, so 1,700 local branches give 42 at the initial audit. At least 25% of the sample is chosen at random, and the central function is audited at the initial audit, at every recertification and at least once a calendar year.

    What if the sites cannot be sampled?

    Then every site is audited at the initial audit and at recertification. In surveillance, 30% of the sites, rounded up to a whole number, are covered each calendar year together with the central function, and the second surveillance normally takes different sites from the first (IAF MD 1 clause 6.2.1).

    Does audit time include travel and report writing?

    Planning, document review and report writing count as audit time, but MD 5 says the audit itself, from the opening meeting to the closing meeting, should typically be at least 80% of the calculated time. Travel and breaks are not part of that on-site duration. An audit day is normally 8 hours, and the number of days may not be cut by planning longer working days.

    Does this work for ISO 27001 or an integrated audit?

    No. IAF MD 5 covers quality, environmental and occupational health and safety management systems. IAF MD 1 notes that ISO/IEC 27006, ISO 22003-1 and ISO 50003 set their own multi-site requirements, which take precedence, and MD 5 refers the audit time of integrated management systems to IAF MD 11.

    The three MD 5 tables in full
    Personnel QMS 1
    1-5 1.5
    6-10 2
    11-15 2.5
    16-25 3
    26-45 4
    46-65 5
    66-85 6
    86-125 7
    126-175 8
    176-275 9
    276-425 10
    426-625 11
    626-875 12
    876-1175 13
    1176-1550 14
    1551-2025 15
    2026-2675 16
    2676-3450 17
    3451-4350 18
    4351-5450 19
    5451-6800 20
    6801-8500 21
    8501-10700 22
    Personnel High Med Low Lim
    1-5 3 2.5 2.5 2.5
    6-10 3.5 3 3 3
    11-15 4.5 3.5 3 3
    16-25 5.5 4.5 3.5 3
    26-45 7 5.5 4 3
    46-65 8 6 4.5 3.5
    66-85 9 7 5 3.5
    86-125 11 8 5.5 4
    126-175 12 9 6 4.5
    176-275 13 10 7 5
    276-425 15 11 8 5.5
    426-625 16 12 9 6
    626-875 17 13 10 6.5
    876-1175 19 15 11 7
    1176-1550 20 16 12 7.5
    1551-2025 21 17 12 8
    2026-2675 23 18 13 8.5
    2676-3450 25 19 14 9
    3451-4350 27 20 15 10
    4351-5450 28 21 16 11
    5451-6800 30 23 17 12
    6801-8500 32 25 19 13
    8501-10700 34 27 20 14

    Audit days for the initial audit, Stage 1 plus Stage 2. The first table is Table QMS 1. The second is Table EMS 1 with its four complexity columns, and Table OH&SMS 1 has the same High, Med and Low figures with no Limited column. Above 10,700 personnel the certification body follows the progression of the table.

    Sources
    • International Accreditation Forum, IAF MD 5:2023, Determination of Audit Time of Quality, Environmental, and Occupational Health & Safety Management Systems (Issue 4, Version 3, issued 14 June 2023): Tables QMS 1, EMS 1 and OH&SMS 1 with their notes, Tables QMS 2, EMS 2 and OH&SMS 2, and clauses 1.8 and 1.9 (audit day, effective personnel), 2.1 (80% on site, travel), 2.2.2 and 2.2.3 (half days), 2.3 (part-time, shifts, seasonal), 3.4 and 3.9 (30% limit), 4.3, 5 (surveillance), 6 (recertification) and 8 (factors).
    • International Accreditation Forum, IAF MD 1:2023, Audit and Certification of a Management System Operated by a Multi-Site Organization (Issue 3): clauses 1 (scheme standards take precedence), 6.1.2.2 (25% at random), 6.1.3.3 (sample sizes), 6.1.3.4 (central function), 6.1.3.6 (worked example), 6.2.1 (no sampling) and 7.3.1 (50% per sampled site).
    • International Accreditation Forum, IAF Mandatory Documents list: both documents as currently published.
    • Checked 20 November 2026: the tool reproduces MD 5's part-time and half-day examples and MD 1's branch office example, and an independent solver that reads the three tables straight from the MD 5 PDF agreed with it on 6,000 practice problems and 3,000 calculator entries.
    • The tool's own choices, where the documents leave one: part of a person rounds up, a figure exactly between two half days rounds up, and a half day that would cut more than 30% is not taken. The working says so each time, and the practice problems avoid these cases. The practice clients are made up.

    Checked 20 November 2026 against IAF MD 5:2023 (Issue 4, Version 3) and IAF MD 1:2023 (Issue 3).

    More free tools

    All free tools