Honestly the best prep resource I found. Had my exam rescheduled last minute and ended up with only a few days to prepare. Did two passes of the dump and still managed to pass. Honestly surprised.

Five of the 60 questions in this pack
Which is the path to add a new column to a single table in task?
- A. Table Selection -> Schemas -> Add Column
- B. New Transformation -> Column -> Add Column
- C. Select Table -> Transform -> Add New
- D. Table Settings -> General -> Add New Column
Show answer and explanation
Correct answer: C. Select Table -> Transform -> Add New
In a task you select the table, open its Transform tab and add a new column there.
Why the other options are wrong
- A. Table Selection and Schemas are used to pick tables, not add columns.
- B. There is no New Transformation path for this.
- D. The General tab of Table Settings does not add columns.
$AR_H_COMMIT_TIMESTAMP Using Qlik Replicate, how can the timestamp shown be converted to unix time (unix epoch-number of seconds since January 1st 1970)?
- A. SELECT datetime (1092941466, ‘unixepoch’, ‘localtime’);
- B. SELECT datetime (482340664, ‘localtime’, ‘unixepoch’);
- C. strftime (‘%s’, $AR_H_COMMIT_TIMESTAMP) - datetime.datetime (‘%s’, ‘1970-01-01 00:00:00’)
- D. strftime (‘%s’, $AR_H_COMMIT_TIMESTAMP)-strftime (‘%s’,‘1970-01-01 00:00:00’)
- E. Time.now.strftime(‘%s’, ‘1970-01-01 00:00:00’)
Show answer and explanation
Correct answer: D. strftime (‘%s’, $AR_H_COMMIT_TIMESTAMP)-strftime (‘%s’,‘1970-01-01 00:00:00’)
Replicate expressions use SQLite syntax, where strftime with the %s format returns a date as seconds since 1970-01-01. Applying it to $AR_H_COMMIT_TIMESTAMP and subtracting the same function applied to the epoch start gives the commit time as unix time.
Why the other options are wrong
- A. This converts a fixed unix number into a date and time, which is the opposite direction and ignores the commit timestamp.
- B. This works on a fixed number instead of the commit timestamp and does not produce unix time.
- C. datetime.datetime is not a SQLite function, so the expression is not valid in Replicate.
- E. Time.now.strftime is not SQLite syntax and does not reference the commit timestamp.
How should missing metadata be added in a Qlik Replicate task after the task has been stopped?
- A. Drop tables or delete tables and data on target side, then run task from a certain timestamp
- B. Under Advanced Run option choose reload target, stop task again, and then resume processing
- C. Under Advanced Run option choose metadata only, stop task again, and then resume processing
- D. Drop tables and data on the target side, run advanced option, create metadata, and then resume task
Show answer and explanation
Correct answer: C. Under Advanced Run option choose metadata only, stop task again, and then resume processing
Advanced Run has a metadata only option that refreshes the metadata without reloading data. Stop the task again and resume it.
Why the other options are wrong
- A. Dropping target tables is not needed to add metadata.
- B. Reloading the target reloads the data instead of just the metadata.
- D. Dropping tables and data is not needed.
Which information in Qlik Replicate can be retrieved from the server logs?
- A. Network and performance issues
- B. Load status and performance of task
- C. Specific task information
- D. Qlik Replicate Server status
Show answer and explanation
Correct answer: A. Network and performance issues
The server log covers server-level matters such as network and performance problems, while task logs hold details of an individual task.
Why the other options are wrong
- B. Task load status and performance are in the task view and task logs.
- C. Specific task information is in the task log, not the server log.
- D. Server status is shown in the console, not retrieved from the logs.
Which two components are responsible for reading data from the source endpoint and writing it to the target endpoint in Full Load replication? (Choose two.)
- A. SOURCE_UNLOAD
- B. TARGET_APPLY
- C. TARGET_UNLOAD
- D. SOURCE_CAPTURE
- E. TARGET_LOAD
Show answer and explanation
Correct answers: A, E
During Full Load, SOURCE_UNLOAD covers the source side, where the data is selected from the source tables, and TARGET_LOAD covers the Full Load operations on the target side. These are the two Full Load components.
Why the other options are wrong
- B. TARGET_APPLY applies changes to the target during change processing, not during Full Load.
- C. TARGET_UNLOAD is not one of the Replicate components used for Full Load.
- D. SOURCE_CAPTURE is the change capture component on the source side, used in CDC.
Try Qlik Replicate free first
60 questions in the full pack- Free sample: 21 questions 21 real questions, every answer explained, in one PDF. Download PDF
- Full pack, $39.00 USD paid once All 60 questions, every answer explained, plus a questions-only PDF. Updates for life.Get the full pack
Qlik Replicate exam questions with answers: all 60 for the Qlik Replicate certification exam.
This pack is the complete set, covering every part of the Qlik Replicate exam outline. Download the free sample to see the question style first.
- 60 exam practice questions: mapped to the Qlik Replicate exam outline
- Complete answers and explanations, including why every wrong option is wrong
- Questions-only PDF: for timed practice
- Email delivery: sent to your email within 24 hours
- Free monthly updates for life
You pay for this PDF once, with a refund if you fail anyway.
Qlik Replicate exam questions: the short answers
How many questions are on the exam?
Qlik's exam page lists 50 questions in 120 minutes. Qlik says the count and passing score may change.
What score do I need to pass?
Qlik lists a passing score of 54%, and says it may be adjusted to keep a consistent standard.
What makes this exam hard
Design is almost half the exam. It is 47% of the topic weights, so know how to set up endpoints, tasks and transformations.
Administration is 23%, troubleshooting 22% and operations 8%.
Before you buy
Free questions
Real Qlik Replicate questions are free on the site, each with the answer explained.
What you get for $39.00 USD
- All 60 questions, each with the correct answer and why the other options are wrong
- 2 PDFs: the full pack, plus a questions-only copy for timed practice
- Delivered to your email within 24 hours
- Updated once a month, with free updates for life, emailed to the address you used at checkout
- Paid once
How a question works
Which information in Qlik Replicate can be retrieved from the server logs?
- ANetwork and performance issues
- BLoad status and performance of task
- CSpecific task information
- DQlik Replicate Server status
Why A is right The server log covers server-level matters such as network and performance problems, while task logs hold details of an individual task.
What do I get?
Every pack comes as 2 PDFs: one with every answer explained, and a questions-only copy for timed practice. This pack is delivered to your email within 24 hours, and every pack includes free updates for life.
How often are the questions updated?
Question sets are updated once a month. The date of the latest update is shown on every exam page.
Will I receive updates after purchasing?
Yes. All PDF purchases include lifetime updates. Updated versions are emailed automatically to the email address used during checkout.
What if an answer looks wrong?
We correct mistakes as we find them, and the monthly update sends those fixes to you. No question bank this size is ever completely flawless, so if something still looks off to you, check it against the vendor's own documentation and send it to support@dailydebian.com. We reply to every message, and the fix ships in the next update, free, for life.
Are your materials enough to pass the exam?
Most candidates use them as their main practice source. If you study with them and still fail, we refund you in full.
What happens if I fail my exam?
You get your money back. Email support@dailydebian.com within 14 days of receiving your results, with your order number and a copy of your official score report showing the fail. Requests are reviewed within 5 to 7 business days and approved refunds go back to the original payment method. Full terms are in the refund policy.
Do you have discount codes?
Yes, when you buy more than one exam pack. For 2 packs, use code BUY2 for 15% off. For 3 or more packs, use code BUY3 for 20% off. Enter the code in the discount box at checkout.
What payment methods do you accept?
Visa, Mastercard, American Express, UnionPay, Apple Pay, Google Pay, Shop Pay and PayPal. All prices are shown in your local currency at checkout.
Do you offer shipping?
No. All products are digital downloads. There is no physical shipping.
I did not receive my order after payment.
Contact support@dailydebian.com with your order number and payment confirmation details.