RF Math Practice: dBm, mW, EIRP and Link Budget

Unlimited RF math practice for the CWNA and CCNA: convert dBm to mW with the rules of 10s and 3s, work out EIRP, the signal at the receiver and the fade margin. Tap an answer to check it; a wrong pick names the slip, such as adding the cable loss or treating +3 dB as +3 mW.

Pick an answer to see the working.

The rules of 10s and 3s give approximate mW values, because +3 dB is really ×1.995; the working shows the exact value. dB answers are whole numbers, except dBd gains: 0 dBd = 2.14 dBi, so those answers keep 2 decimal places.

Practise for the CCNA and CWDP

RF math is CWNA objective 1.2 and part of CCNA topic 1.5.b; the CWNA is the prerequisite for the CWDP, whose objectives cover transmit power and antennas. Start with the free real exam questions, then get the full pack.

CCNA 200-3011,395 real exam questions · US$39
Free: 349 questionsGet the full pack
CWNP CWDP-305120 real exam questions · US$39
Free: 23 questionsGet the full pack

RF math FAQ

How do you convert dBm to mW with the rules of 10s and 3s?

Start from 0 dBm = 1 mW and split the dBm value into steps of 10 dB and 3 dB. Each +10 dB multiplies the power by 10, each +3 dB doubles it, each −10 dB divides it by 10 and each −3 dB halves it. For 13 dBm: 1 mW × 10 × 2 = 20 mW. For 4 dBm: 1 mW × 10 ÷ 2 ÷ 2 = 2.5 mW.

Why are the rule values only approximate?

The exact formula is dBm = 10 × log10(mW), so a 3 dB step is a ratio of 1.995, not quite 2. The exact value of 13 dBm is 10^(13/10) = 19.95 mW; the rules give 20 mW, the value in Cisco's own table. Steps of 10 dB are exact.

How do you calculate EIRP?

Add the transmitter power in dBm to the antenna gain in dBi and subtract the cable losses in dB. Cisco's example: a 20 dBm bridge, a cable with 3.35 dB of loss and a 21 dBi dish give an EIRP of 37.65 dBm.

Can I add dB to a power in mW?

No. Gains and losses in dB add to and subtract from a power in dBm. Convert the mW figure first: 100 mW is 20 dBm, so 100 mW with a 3 dB cable loss and a 10 dBi antenna is 20 − 3 + 10 = 27 dBm, not 107.

What is the difference between dBi and dBd?

dBi compares an antenna with an isotropic antenna and dBd with a dipole. Cisco's antenna guide gives a dipole a gain of 2.14 dBi, so 0 dBd = 2.14 dBi: add 2.14 to a dBd rating to get dBi. Many documents round this to 2.2. EIRP uses dBi.

How do you work out the signal at the receiver?

Received signal = Tx power − Tx cable loss + Tx antenna gain − free space path loss + Rx antenna gain − Rx cable loss. Every term is in dB except the power, which is in dBm, so the answer is in dBm.

What is fade margin?

Fade margin is the extra signal power a link has so it keeps working when the signal fades. It is the received signal minus the receiver sensitivity, the weakest signal the receiver can decode: −74 dBm against a sensitivity of −85 dBm is 11 dB.

Is RF math on the CWNA, CCNA and ENCOR exams?

CWNA-110 objective 1.2 is "Apply the basic concepts of RF mathematics and measurement", with 1.2.7 "dBm to mW conversion rules of 10 and 3" and 1.2.8 "Equivalent Isotropically Radiated Power (EIRP)". The CCNA 200-301 v2.0 topics list 1.5.b RF characteristics. The ENCOR 350-401 v1.2 topics have no wireless section.

Sources
  • CWNP, CWNA-110 exam objectives (September 2026): 1.2 Apply the basic concepts of RF mathematics and measurement, 1.2.7 dBm to mW conversion rules of 10 and 3, 1.2.8 Equivalent Isotropically Radiated Power (EIRP), 1.1.11 Free Space Path Loss (FSPL).
  • Cisco, RF Power Values (Document ID 23231): dB = 10 × log10(signal/reference) with dBm compared to 1 mW; +3 dB doubles, −3 dB halves, +10 dB is 10 times; the table of approximate dBm to mW values; the EIRP rule and its 37.65 dBm example; the factors in a link and receiver sensitivity.
  • Cisco, Aironet and Catalyst Antennas and Accessories Reference Guide: dipole antennas have a gain of 0 dBd = 2.14 dBi.
  • Cisco, Wireless Point-to-Point Quick Reference Sheet (Document ID 9218), archived copy, as Cisco no longer serves the page: Rx level = Tx power − cable loss + antenna gain − FSPL + antenna gain − cable loss; fade margin = system gain (Tx power − Rx sensitivity) + both antenna gains − FSPL − cable losses.
  • Cisco, 200-301 CCNA v2.0 exam topics (1.5.b RF characteristics) and 350-401 ENCOR v1.2 exam topics (no wireless section); CWNP, CWDP-305 exam objectives (4.5.3 RF coverage: transmit power, radio count, antennas).
  • Checked 20 November 2026. The tool's own approach: problems are generated; dB values are whole numbers except dBd gains; rule of 10s and 3s problems use only dBm values whose shortest split into 10 dB and 3 dB steps gives one value that matches Cisco's table (so 21, 24 and 27 dBm are left out). An independent re-solver (a search over every chain of 10 dB and 3 dB steps, and plain decimal sums for the link) agreed with the drill on 10,000 generated problems.

Checked 20 November 2026 against the CWNA-110 exam objectives and Cisco's RF power, antenna and point to point link references.

More free tools

All free tools