Cisco ACI Contract Direction Practice
Unlimited Cisco ACI contract practice for the DCCOR 350-601. Each problem gives one packet between two EPGs and two contracts with their subject options: decide if the leaf permits it, then pick the contract entry it is checked against. A wrong answer names the slip, such as a provider opening a session to the consumer's port.
Packet
Names and ports are invented. The three EPGs share one VRF in enforced mode, the default, with no preferred group, vzAny, intra-EPG isolation or intra-EPG contract. Each subject has one filter entry with the Permit action, and the Stateful option is off, its default.
Cisco DCCOR prep
The DCCOR v1.2 exam topics list "5.1.b ACI contracts and microsegmentation" under network security, next to "1.4 Apply ACI concepts". Start with the free real exam questions, then get the full pack.
ACI contracts FAQ
What does Apply Both Directions do?
It deploys the subject's filter for both the consumer to provider and the provider to consumer direction. On its own it deploys the filter protocol and the source and destination ports exactly as defined, in both directions. Cisco's example is a consumer Web EPG that needs TCP port 22 on a provider App EPG: the filter is TCP to destination port 22.
What does Reverse Filter Ports do?
It reverses the source and destination ports for the provider to consumer direction, so a filter from any source port to destination port 22 becomes source port 22 to any destination port on the way back. It is available only when Apply Both Directions is enabled, and the two together are the default, which permits the traffic in both directions between the consumer and the provider.
Can the provider open a session to the consumer?
Not to the port the contract opens. With the defaults, the provider to consumer entry is from the filter port, not to it, so in Cisco's port 22 example the App EPG may send from port 22 but may not reach port 22 on the Web EPG. Zoning rules are stateless, though: with the Stateful option off, a provider packet from port 22 is permitted to any consumer port.
Why is Reverse Filter Ports off not useful?
With Apply Both Directions on and Reverse Filter Ports off, the provider to consumer entry is also to port 22. Cisco calls this configuration not useful because the provider would generate traffic from port 22 and not to port 22, so its replies are dropped. The configuration is possible but not common.
When would you turn Apply Both Directions off?
When you want different filters for each direction. The subject then has one filter for consumer to provider and another for provider to consumer, and nothing is reversed for you. Cisco's example is a streaming server in the provider EPG that sends UDP traffic from a specific set of ports.
Do endpoints in the same EPG need a contract?
No. A contract is not required to allow communication between endpoints in the same EPG. Intra-EPG isolation or an intra-EPG contract can restrict it, and the drill uses neither.
What happens to traffic between EPGs with no contract?
It is dropped. ACI follows an allow-list model: without a contract between two EPGs, no unicast traffic passes between them, unless the VRF is in unenforced mode or the EPGs are in a preferred group. The implicit deny any to any rule drops it, and it is logged. Two EPGs that each have a contract with a third EPG still have no contract with each other.
Are ACI contracts stateful?
No. Zoning rule entries perform stateless filtering. The Stateful option on a filter entry permits TCP packets from provider to consumer only if the ACK flag is set, and it is disabled by default. The drill leaves it off.
Sources
- Cisco, Cisco ACI Contract Guide White Paper (updated 19 November 2026): the allow-list model and the implicit deny any to any, no contract needed inside one EPG, the consumer and provider directions, Apply Both Directions and Reverse Filter Ports (Figures 2, 3, 93, 94 and 96), stateless zoning rules and the Stateful option.
- Cisco, Implementing Cisco Data Center Core Technologies v1.2 (350-601 DCCOR) exam topics: 1.4 Apply ACI concepts, and 5.1.b ACI contracts and microsegmentation.
- Checked 21 November 2026: the drill reproduces the white paper's examples (HTTP port 80 with Web as consumer and then as provider, TCP port 22 with and without Reverse Filter Ports, the provider sending from port 80 with Stateful off). It was tested on 20,000 generated problems against a separate Python re-solver. This is an independent practice tool, not made or endorsed by Cisco.
Checked 21 November 2026 against the Cisco ACI Contract Guide white paper and the DCCOR v1.2 exam topics.
- DrillCisco vPC failure practicePick the operational primary and what each Nexus switch shuts down after peer-link, keepalive and reload failures.
- DrillHSRP and VRRP election practicePick the HSRP active router or the VRRP Master after failures, preempt and interface tracking.
- DrillCisco ACL practiceFind the line a packet matches and write standard and extended ACLs.