Hemodynamics Calculation Practice: MAP, CO, CI, SVR and PVR
Free hemodynamics calculation practice for CCRN and NCLEX-RN students. Each invented ICU case gives the BP, HR, stroke volume and PA catheter pressures: work out MAP, CO, CI, SVI, SVR and PVR, and Check my answer names the slip, such as a missing × 80 or the CO used where the CI was asked.
Normal ranges vary by source. A reading of low, normal or high is given only where every cited range agrees, so no value here sits in a band where they differ.
Practice for exams only, not clinical guidance. Every case is invented. Follow your unit's protocols.
Practise the exams
Start with the free real exam questions for your exam, then get the full pack.
Hemodynamics FAQ
The formulas and normal ranges in short
- MAP:
DBP + (SBP - DBP) ÷ 3. Normal 70 to 110 mmHg. - CO:
HR × SV ÷ 1,000in L/min. Normal 4 to 8 L/min. - CI:
CO ÷ BSA. Normal 2.5 to 4.0 L/min/m². - SV:
CO × 1,000 ÷ HRin mL. Normal 60 to 100 mL. - SVI:
SV ÷ BSAin mL/m². No range in the cited sources. - SVR:
80 × (MAP - CVP) ÷ CO. Normal 800 to 1,200 or 900 to 1,200 dyn·s/cm⁵. - PVR:
80 × (mPAP - PAWP) ÷ CO. Normal 37 to 250, or under 160 dyn·s/cm⁵. - BSA (Du Bois):
0.007184 × height^0.725 × weight^0.425, height in cm, weight in kg.
How do you calculate MAP?
MAP = DBP + (SBP - DBP) ÷ 3, which is the same as (SBP + 2 × DBP) ÷ 3. For a BP of 120/80 that is 80 + 40 ÷ 3 = 93.33 mmHg, the worked example in OpenStax Anatomy and Physiology. OpenStax gives a normal MAP of 70 to 110 mmHg.
Why is MAP not the plain average of SBP and DBP?
StatPearls defines MAP as the average arterial pressure over the whole cardiac cycle, and the formula counts the DBP twice: (SBP + 2 × DBP) ÷ 3. The plain average, (SBP + DBP) ÷ 2, comes out higher whenever SBP is above DBP. For 120/80 it gives 100 instead of 93.
How do you calculate cardiac output and cardiac index?
CO = HR × SV. With SV in mL, HR × SV is in mL/min, so divide by 1,000 for L/min: 80 × 70 mL = 5,600 mL/min = 5.6 L/min. CI = CO ÷ BSA, in L/min/m². OpenStax Medical-Surgical Nursing gives normal ranges of 4 to 8 L/min for CO and 2.5 to 4.0 L/min/m² for CI.
How do you calculate SV and SVI?
SV = CO × 1,000 ÷ HR, in mL, and SVI = SV ÷ BSA, in mL/m² (MSD Manual). OpenStax and StatPearls give a normal SV of 60 to 100 mL. None of the cited sources gives an SVI range, so the drill gives no low or high reading for SVI.
What is the SVR formula, and why multiply by 80?
SVR = 80 × (MAP - CVP) ÷ CO. The pressure drop divided by the CO is in Wood units (mmHg·min/L); multiplying by 80 turns it into dyn·s/cm⁵ (OpenAnesthesia). Normal SVR is 800 to 1,200 dyn·s/cm⁵ in OpenStax and 900 to 1,200 in OpenAnesthesia.
What is the PVR formula?
PVR = 80 × (mPAP - PAWP) ÷ CO: the pressure drop across the lungs, from the mean pulmonary artery pressure (mPAP) to the wedge pressure, over the CO. StatPearls gives a normal PVR of 37 to 250 dyn·s/cm⁵, and OpenAnesthesia says it is usually under 2 Wood units, which is 160 dyn·s/cm⁵.
Why do normal ranges differ, and how does the drill handle it?
Sources round and measure differently: SVR is 800 to 1,200 in OpenStax but 900 to 1,200 in OpenAnesthesia. The drill only uses values that every cited range reads the same way, such as an SVR of 1,000 (normal in both) or 700 (low in both), never 850. Follow the ranges your course or exam gives.
How is the BSA worked out?
With the Du Bois formula, as in the MSD Manual: BSA = 0.007184 × height^0.725 × weight^0.425, with height in cm and weight in kg, rounded to 2 decimal places. In the whole case the BSA is given; the BSA option lets you practise the formula itself.
How should I round my answers?
MAP, SV, SVI, SVR and PVR to whole numbers, CO and CI to 1 decimal place, and BSA to 2. Each case is built so that MAP, CO, SV, SVR and PVR come out exact; for CI, SVI and BSA any correctly rounded answer is accepted.
Is this clinical guidance?
No. It is practice for exam calculations, and every case is invented. Follow your unit's protocols.
Sources
- StatPearls (NIH, NCBI Bookshelf): Physiology, Mean Arterial Pressure (the MAP formula; CO as heart rate times stroke volume), Physiology, Cardiac Index (CI = CO ÷ BSA), Physiology, Stroke Volume (CO = SV × HR; normal SV 60 to 100 mL) and Physiology, Pulmonary Vascular Resistance (normal PVR 37 to 250 dyn·s/cm⁵).
- OpenStax (Rice University), Anatomy and Physiology 2e, 20.2 Blood Flow, Blood Pressure, and Resistance: the MAP formula, the worked example 80 + (120 minus 80) ÷ 3 = 93.33, and a normal MAP of 70 to 110 mm Hg.
- OpenStax (Rice University), Medical-Surgical Nursing, 35.2 Cardiovascular Concerns: CO from stroke volume and heart rate, and Table 35.2 normal ranges: CO 4 to 8 L/min, cardiac index 2.5 to 4.0 L/min/m², stroke volume 60 to 100 mL/beat, SVR 800 to 1,200.
- MSD Manual Professional Edition: Cardiac Catheterization (CO 4 to 8 L/minute at rest; CI = CO/BSA; the Du Bois equation), the Cardiac Output MultiCalc (SV = 1000 × CO ÷ HR; SI = SV ÷ BSA) and the Body Surface Area (Du Bois Method) calculator (BSA = 0.007184 × height^0.725 × weight^0.425, cm and kg).
- OpenAnesthesia (International Anesthesia Research Society), Calculation of Pulmonary and Systemic Vascular Resistance: SVR = (MAP minus CVP) ÷ CO × 80, PVR = (mPAP minus PCWP) ÷ CO in Wood units and × 80 for dyn·s/cm⁵, the MAP formula, normal SVR 900 to 1,200 and PVR usually under 2 Wood units.
- Checked 20 November 2026. The tool's own approach: every case is invented; a low, normal or high reading is shown only where all cited ranges agree, with a margin from each edge; every answer is exact at the precision asked, or any correctly rounded answer is accepted. The drill reproduces the OpenStax worked MAP, and an independent re-solver (exact fractions, Wood units first, Du Bois by logarithms) agreed with it on 42,000 generated problems.
Checked 20 November 2026 against StatPearls (NIH), OpenStax, the MSD Manual Professional Edition and OpenAnesthesia.
- DrillABG interpretation practiceRead new invented blood gases as acidosis or alkalosis, respiratory or metabolic, and compensated or not.
- DrillBurn fluid practiceRule of nines %TBSA, the 24-hour fluid volume and the 8 and 16 hour rates.
- DrillDosage calculation practiceConversions, weight-based doses, IV mL/h and drip rates in gtt/min.