F5 BIG-IP Pool Practice: Priority Groups and Load Balancing
Unlimited F5 BIG-IP pool practice for the F5 Certified Administrator exams. Each problem shows a pool of six members: work out which members priority group activation puts in play, or where the load balancing method sends new connections. A wrong answer names the slip.
Members A to F. Group is the priority group, Conns is current connections, and Limit 0 means no connection limit. Every new connection is from a new client with no persistence record.
F5 BIG-IP exam prep
The F5CAB3 blueprint asks you to determine the active nodes in a priority group configuration and the load balancing method for a pool. F5CAB5 asks why load balancing is not working as expected. Start with the free real exam questions, then get the full pack.
BIG-IP pool rules FAQ
What does priority group activation "Less than 2" mean?
It is the minimum number of members that must be available before BIG-IP sends traffic to a lower priority group. With Less than 2, the highest group keeps all the traffic while it has 2 or more available members. When it drops to 1 or 0, the next group joins.
Which priority group does BIG-IP use first?
The group with the highest number. The numbers only set the order. A member left at the default priority group 0 is in the lowest group and gets traffic only when the higher groups are short of available members.
When a lower priority group activates, does the higher group stop taking traffic?
No. The lower group joins the groups above it. F5 states that with several priority groups enabled, traffic is processed by all available members of all enabled groups, shared by the load balancing method of the pool.
With three priority groups, when does the lowest one get traffic?
When the groups above it combined have fewer available members than the setting. In the F5 example with groups 15, 10 and 2 and Less than 2, group 2 receives traffic only when groups 15 and 10 combined have fewer than 2 available members.
Does traffic go back to the higher priority group?
Yes. When enough members are available again in the higher group, BIG-IP directs new traffic to that group again. Active and persisted connections stay on the lower group members until they complete or the persistence timeout is reached.
What if priority group activation is Disabled?
Disabled is the default, and a value of 0 also disables the feature. The priority group numbers on the members are then not used: every available member takes traffic.
What is the difference between Disabled and Forced Offline?
A Disabled member keeps its active connections and accepts new connections only when they belong to an existing persistence session. A Forced Offline member lets existing connections time out and allows no new connections at all.
Does Round Robin use the ratio weight?
No. Round Robin passes each new connection to the next member in line, so connections spread evenly. F5 notes that members configured with a ratio must reference a ratio load balancing method for the ratio to be used.
How does Ratio (member) share connections?
In a static rotation by the ratio weight you set on each member. Over time each member receives connections in proportion to its weight, so with ratios 3, 2, 1 and 1, seven new connections go 3, 2, 1 and 1.
What is the difference between Least Connections and Weighted Least Connections?
Least Connections (member) picks the member with the fewest active connections and does not look at the connection limit. Weighted Least Connections (member) divides connections by the connection limit: a member with 20 of 200 is at 10% and is picked ahead of a member with 20 of 100, at 20%. Every member needs a connection limit above zero.
Which load balancing methods does this drill leave out?
Fastest, Observed, Predictive, Dynamic Ratio, Least Sessions and Ratio Least Connections. F5 describes them, but not with a rule you can work out from a table of members, so the drill does not ask about them. It also never asks about a tie.
Which F5 exams does this drill cover?
The F5 Certified Administrator, BIG-IP blueprint lists "Determine the active nodes in a priority group configuration" and "Determine the load balancing method for a pool" under F5CAB3, and priority group activation and "a pool member not in the active priority group" under F5CAB5.
Sources
- F5, BIG-IP Local Traffic Management: Basics 14.1, About Pools: the load balancing methods (Round Robin, Ratio, Least Connections, Weighted Least Connections with their examples), priority-based member activation, connection limits and pool member status.
- F5 K13525153, Configure a standby pool member using priority groups: the highest group number is used first, and the example with groups 15, 10 and 2 counted together.
- F5 K7065, Configuring the BIG-IP system to use alternate servers when pool members are unavailable: a lower group joins, and all available members of all enabled priority groups process traffic.
- F5 K02024845, BIG-IP LTM-DNS operations guide, chapter 2, BIG-IP LTM load balancing: static and dynamic methods, the 3:2:1:1 ratio example and the Priority 10 and Priority 5 example.
- F5 K13310, Disable nodes or pool members for maintenance: what Disabled and Forced Offline members accept.
- F5 K6406, Overview of Least Connections, Fastest, Observed, and Predictive pool member load balancing: Least Connections, and the note that a ratio needs a ratio method.
- F5 K29900360, F5 certification: Exams and blueprints, and the F5 Certified Administrator, BIG-IP exam blueprint (F5-CAB.0425) it links to.
- Checked 20 November 2026. The tool's own approach: pools and numbers are invented, a traffic share question always covers whole rotations, and Disabled members appear only where priority group activation is Disabled. It never asks about things these pages do not state exactly. An independent re-solver, written from the quoted rules, agreed with the drill on 24,000 generated problems.
Checked 20 November 2026 against the F5 BIG-IP Local Traffic Management manual, F5 knowledge articles and the F5 Certified Administrator, BIG-IP exam blueprint.
- DrillAWS route priority practiceTap the route a VPC route table, virtual private gateway or transit gateway uses for a packet.
- DrillPanorama rule order practiceTap the Security rule a firewall applies first across shared and device group pre-rules, local rules, post-rules and default rules.
- DrillSubnetting practiceUnlimited random questions at three levels, with worked answers.