Workday Absence Practice Questions with Explanations

Free Workday Absence practice questions. 20 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.

Absence practice questions

Question 1

You need to add two years to an existing period schedule.What task will you use?

  • A. Generate Period Schedule Periods
  • B. Set Up Period Schedule
  • C. Create Period Schedule
  • D. Produce Period Schedule Periods
Show answer and explanation ▾

Correct answer: A

Generate Period Schedule Periods adds new dated periods to a schedule that already exists, which is how you extend it by two years.

Why the other options are wrong:

  • B. Set Up Period Schedule is not the task that adds periods.
  • C. Create Period Schedule makes a new schedule rather than extending one.
  • D. Produce Period Schedule Periods is not a Workday task name.

Question 2

You need to create a time off plan that requires a user to enter the start and stop time when submitting a time off request.When would you configure this?

  • A. Before you add the time off to a days-based time off plan.
  • B. Before you add the time off to an hours-based time off plan.
  • C. After you add the time off to an hours-based time off plan.
  • D. After you add the time off to a days-based time off plan.
Show answer and explanation ▾

Correct answer: B

The start and stop time requirement is set on the time off, and it has to be set before that time off is added to an hours-based plan.

Why the other options are wrong:

  • A. Days-based plans do not capture start and stop times.
  • C. After the time off is added to the plan it is too late for this setting.
  • D. Days-based plans do not capture start and stop times.

Question 3

Where do you specify the name that displays in the prompt when users make a time off request selection?

  • A. In the Create Time Off task, in the Name field.
  • B. In the Create Time Off Plans task, in the Name field.
  • C. In the Maintain Time Off Types task, in the Name column.
  • D. In the Create Time Off task, in the Code field.
Show answer and explanation ▾

Correct answer: A

The Name field of the Create Time Off task holds the label users see when they choose a time off in a request.

Why the other options are wrong:

  • B. The Create Time Off Plans task defines the plan, not the label shown for the time off choice.
  • C. Maintain Time Off Types is a different task and column.
  • D. The Code field is an identifier, not the prompt name.

Question 4

You created and saved a time off plan configured to track balances. Later, you realize the plan should not track balances.How will you resolve this issue?

  • A. Edit the balance tracking time off plan to clear the balance period field.
  • B. Delete the balance tracking time off plan and create a new plan that does not track balances.
  • C. Edit the balance tracking time off plan to clear the Balance Tracking checkbox.
  • D. Create a new accrual and assign it to the balance tracking time off plan.
Show answer and explanation ▾

Correct answer: B

Whether a plan tracks balances cannot be edited after it is saved, so the plan has to be deleted and recreated without balance tracking.

Why the other options are wrong:

  • A. Clearing the balance period field does not turn off balance tracking.
  • C. The Balance Tracking checkbox cannot be cleared on a saved plan.
  • D. An accrual does not remove balance tracking from a plan.

Question 5

What web service can you use to create new period schedules?

  • A. Get Period Schedule
  • B. Get Schedules
  • C. Put Period Schedule
  • D. Put Schedules
Show answer and explanation ▾

Correct answer: C

Put Period Schedule is the web service that creates, and updates, period schedules.

Why the other options are wrong:

  • A. Get Period Schedule only reads data.
  • B. Get Schedules only reads data.
  • D. Put Schedules is not the period schedule service.

Question 6

You have set the time off lower limit to zero.What can you do to ensure workers can request only paid time off?

  • A. Set the maximum unpaid time off units to zero and clear the Do Not Allow Request checkbox.
  • B. Set the maximum unpaid time off units to 8 and select the Do Not Allow Request checkbox.
  • C. Set the maximum unpaid time off units to zero and select the Do Not Allow Request checkbox.
  • D. Set the maximum unpaid time off units to 8 and clear the Do Not Allow Request checkbox.
Show answer and explanation ▾

Correct answer: C

Maximum Unpaid Time Off Units Allowed limits how much unpaid time off can be requested, and a value of zero prevents unpaid time off. Selecting Do Not Allow Request stops a failing request from being saved instead of only warning.

Why the other options are wrong:

  • A. With Do Not Allow Request cleared, a failing request can still be saved with only a warning.
  • B. A limit of 8 still allows up to 8 units of unpaid time off.
  • D. A limit of 8 with the check box cleared allows unpaid time and only warns.

Question 7

You need to determine the number of years between the period start date and an employee's hire date to determine their time off accrual.What type of numeric calculation would you use?

  • A. Date extract calculation
  • B. Date difference calculation
  • C. Lookup calculation
  • D. Conditional calculation
Show answer and explanation ▾

Correct answer: B

A date difference calculation returns the number of days, months or years between two dates, such as the years between the hire date and the period start date used for an accrual.

Why the other options are wrong:

  • A. A date extract returns the year, month or day part of one date, not the interval between two dates.
  • C. A lookup calculation returns one value based on another value.
  • D. A conditional calculation returns a value from IF statements, not the interval between two dates.

Question 8

What field on a time off plan defines the number of hours or days that automatically populate when entering time off requests?

  • A. Days to Include
  • B. Lower Limit
  • C. Daily Quantity Default
  • D. Accrual Frequency Method
Show answer and explanation ▾

Correct answer: C

The Daily Quantity Default field on the time off plan sets the daily default quantity that fills in for time off requests entered through the calendar.

Why the other options are wrong:

  • A. Days to Include does not set the quantity that fills in on a request.
  • B. The lower limit sets how far a balance can go while time off is still paid.
  • D. The accrual frequency method controls when accruals are added relative to time off.

Question 9

What task would you use to manually set up a new period schedule in Workday?

  • A. Produce Period Schedule Periods
  • B. Generate Period Schedule Periods
  • C. Set Up Period Schedule
  • D. Create Period Schedule
Show answer and explanation ▾

Correct answer: D

The Create Period Schedule task is used to set up a period schedule manually.

Why the other options are wrong:

  • A. Produce Period Schedule Periods is not the task for setting up a period schedule.
  • B. Generate Period Schedule Periods adds periods to a schedule rather than creating the schedule.
  • C. Set Up Period Schedule is not the task used to create a period schedule.

Question 10

Refer to the following scenario to answer the question below.An absence administrator must create a new time off plan to record when workers fulfill public duties. Because duties vary in duration, they will configure an Accrue-As-You-Go plan to ensure workers always accrue enough time to cover their time off requests.The plan balance should be available for managers and administrators to view in periods where workers are eligible.

The plan balance should not be visible to workers.

Which option should the administrator configure?

  • A. Set the balance visibility of the plan to Never Show Balance and select the Overrides Allowed checkbox.
  • B. Set the balance visibility of the plan to Never Show Balance.
  • C. Set the balance visibility of the plan to Eligible in Period and select the Hide Balance from Worker Self Service checkbox.
  • D. Set the time off plan to Not Track Balances and select the Overrides Allowed checkbox.
Show answer and explanation ▾

Correct answer: C

Eligible in Period shows balances when the worker is eligible at any point in the processing period, and Hide Balance from Worker Self Service keeps them from workers while managers and administrators still see them.

Why the other options are wrong:

  • A. Never Show Balance hides the balance under all conditions, so managers and administrators could not see it either.
  • B. Never Show Balance hides balances under all conditions, including from managers and administrators.
  • D. Not tracking balances removes the balance that managers need to see.

Question 11

Refer to the following scenario to answer the question below.You created a new time off. You need to prevent employees from requesting more than eight hours of time off in a day. Managers and administrators should be able to enter more than eight hours to allow for exceptional circumstances.How do you enable managers and administrators to enter more than eight hours?

  • A. Select the Allow Override for Entry On Behalf Of Worker checkbox.
  • B. Configure segmented security.
  • C. Clear the Do Not Allow Request checkbox.
  • D. Configure a time off plan eligibility override on the time off.
Show answer and explanation ▾

Correct answer: A

Users with Allow Override for Entry on Behalf of Worker can override the validation when entering, revising or correcting time off for employees, which lets managers and administrators enter more than eight hours.

Why the other options are wrong:

  • B. Segmented security controls access to data, not overriding a request validation.
  • C. Clearing Do Not Allow Request would let employees save longer requests too, with only a warning.
  • D. An eligibility override changes who is eligible, not the hours limit on a request.

Question 12

Refer to the following scenario to answer the question below.You created a new time off. You need to prevent employees from requesting more than eight hours of time off in a day. Managers and administrators should be able to enter more than eight hours to allow for exceptional circumstances.Which data entry validation should you use to configure the above?

  • A. Multiple Time Off Requests Not Allowed for Same Date
  • B. Consecutive Day Maximum
  • C. Maximum
  • D. Maximum Unpaid Time Off Units Allowed
Show answer and explanation ▾

Correct answer: C

The Maximum validation defines the most time off an employee can enter in a request, so it caps a day at eight hours.

Why the other options are wrong:

  • A. That validation blocks more than one request on the same date, not the hours in a request.
  • B. Consecutive Day Maximum limits how many days in a row a worker can take off.
  • D. Maximum Unpaid Time Off Units Allowed limits unpaid time off, not daily hours.

Question 13

You need to prevent workers’ Time Off Plan balances from exceeding 200 hours.How will you do so?

  • A. Configure an Upper Limit of 200.
  • B. Configure a Carryover Limit of 200.
  • C. Configure a Maximum Unpaid Units Allowed validation of 200.
  • D. Configure a Lower Limit of 200.
Show answer and explanation ▾

Correct answer: A

The upper limit sets the maximum number of hours or days employees can accumulate in their time off plan balance, so an upper limit of 200 caps the balance at 200 hours.

Why the other options are wrong:

  • B. A carryover limit caps what moves into the next balance period, not the balance itself.
  • C. That validation limits unpaid time off requests, not the plan balance.
  • D. A lower limit concerns how far the balance can go down while time off is paid, not a maximum.

Question 14

An absence administrator is configuring a new time off plan. They understand that period schedules are fundamental components for time off plans.Which statement describes a primary function or characteristic of a period schedule?

  • A. Period schedules define the public holidays that will display on the worker’s absence calendar.
  • B. Period schedules determine the default accrual frequency for a time off plan.
  • C. Period schedules define the maximum number of consecutive days a worker can take off in a single time off request.
  • D. Period schedules define the types of time off workers can request.
Show answer and explanation ▾

Correct answer: B

Period schedules set the accrual frequency for a time off plan. Workday processes accruals once each processing period unless you override the accrual frequency, so the schedule sets the default.

Why the other options are wrong:

  • A. Public holidays on the absence calendar are not defined by the period schedule.
  • C. The limit on consecutive days off is set by a time off validation.
  • D. The kinds of time off are set up as time offs and leave types, not in the period schedule.

Question 15

An organization is tracking worker sickness using a leave type.

When workers are sick for short periods of time, the absence must be subtracted from the leave type balance.How can the absence administrator meet this requirement?

  • A. Create a time off plan and use calculations to track the amount of leave taken on the accrual.
  • B. Create a time off plan and assign it to the same absence type group as the Sickness leave type.
  • C. Create a time off plan and add the time off to the Intermittent Time Offs field on the Sickness leave type.
  • D. Create a time off plan and use calculated fields to define the leave entitlement on the Sickness leave type.
Show answer and explanation ▾

Correct answer: C

Intermittent Time Offs on a leave type lists time offs that count as units taken for that leave. Workday deducts such linked time off from both the time off plan and the leave balance, so short sick absences reduce the Sickness balance.

Why the other options are wrong:

  • A. Calculations on the accrual do not reduce the leave type balance.
  • B. Sharing an absence type group does not make time off reduce the leave balance.
  • D. Calculated fields for entitlement set the amount available, not deductions from time off.

Question 16

As an administrator, you created three different leave types. You assigned all three to the same leave family.

When a worker uses any of the leave types, Workday must subtract time away from all three leave balances.What would you configure to meet this requirement?

  • A. Select the Include all Leave Types from Leave Family checkbox on all three leave types.
  • B. Include a time off in the Intermittent Time Offs field on all three leave types.
  • C. Select the Include all Leave Types from Leave Family checkbox on one of the leave types only.
  • D. Create an absence table and assign all three leave types to the table.
Show answer and explanation ▾

Correct answer: A

Include all Leave Types from Leave Family makes units taken on every other leave type in the family count against the leave type where it is selected. Selecting it on all three makes each balance reduce for any of them.

Why the other options are wrong:

  • B. Intermittent time offs link a time off to a leave type, not leave types to each other.
  • C. Selecting it on only one leave type affects that one balance alone.
  • D. An absence table is not how leave balances in a family are combined.

Question 17

When a worker is requesting leave, you would like them to view details regarding how much leave entitlement they have available and what their remaining entitlement will be if the leave request is approved.What would you configure to accomplish this?

  • A. Eligibility Criteria
  • B. Leave Reasons
  • C. Cascading Leave
  • D. Supporting Data
Show answer and explanation ▾

Correct answer: D

Supporting data on a leave type displays the employee's current leave balance and the amount of the current request, so the worker sees what is available and what will remain.

Why the other options are wrong:

  • A. Eligibility criteria control who can request the leave, not what details are shown.
  • B. Leave reasons record why leave is taken.
  • C. Cascading leave is not what shows balance details on the request.

Question 18

In self-service, a worker submits a request exceeding their entitlement.What Leave Type validation configuration generates an alert?

  • A. Selecting the Allow Override for Entry on Behalf of Worker checkbox
  • B. Clearing the Do Not Allow Request checkbox
  • C. Selecting the Hide from Worker Self Service checkbox on the supporting data
  • D. Defining custom text for the validation message
Show answer and explanation ▾

Correct answer: B

Clearing the Do Not Allow Request check box turns the validation into a soft error, so the worker sees a warning message but can still submit the request for review.

Why the other options are wrong:

  • A. That option lets managers and administrators override the rule when entering for workers.
  • C. Hiding supporting data from self-service does not create an alert.
  • D. Custom message text changes the wording but does not turn a block into an alert.

Question 19

You need to create two new leave types, Medical Leave and Military Leave. Their balances are coordinated. Each leave is in a different leave family. You also need to create a Time Off that will reduce the balance of either leave when a worker requests it.How would you coordinate the leaves?

  • A. Add Medical Leave to the Additional Leaves Types field on Military Leave.
  • B. Select the Include all Leave Types from Leave Family checkbox.
  • C. In the Additional Leave Types field on each of the leaves, add the leave type that you want to combine.
  • D. Add Military Leave to the Additional Leave Types field on Medical Leave.
Show answer and explanation ▾

Correct answer: C

The Additional Leave Types field lists other leave types whose units count as taken for this leave type, and each leave type selected there must also reference the one being defined. So each leave lists the other.

Why the other options are wrong:

  • A. Adding the link on Military Leave only counts Medical Leave units against Military Leave alone.
  • B. That check box works within one leave family, and these leaves are in different families.
  • D. Adding the link on Medical Leave only counts Military Leave units against Medical Leave alone.

Question 20

Refer to the following scenario to answer the question below.You need to create a leave type that allows workers to take a maximum of 180 days of leave within a rolling forward 12 months period for each child born.How would you prevent workers from requesting more than their entitlement?

  • A. Configure eligibility on the leave type.
  • B. Do not show the balance of the leave type.
  • C. Select the Leave Impact: Absence Accrual Effect checkbox.
  • D. Configure a validation on the leave type.
Show answer and explanation ▾

Correct answer: D

Validation rules on a leave type are what block requests that exceed the allowed amount, so a validation stops workers from requesting more than their entitlement.

Why the other options are wrong:

  • A. Eligibility controls who can request the leave, not how much they can take.
  • B. Hiding the balance does not stop requests above the entitlement.
  • C. The Absence Accrual Effect check box does not limit how much leave a worker can request.

Get the complete Absence bank

These 20 questions are roughly 26% of the bank. The full pack has 77 real exam questions, each with the same depth of explanation, plus a questions-only PDF for timed practice and free updates forever.

View the full Workday Absence question bank →

About the Absence exam

These 20 Workday Absence questions are free here, and as the free sample PDF.

Back to blog