VMware 3V0-25.25 VCAP VCF Networking Practice Questions with Explanations
Free VMware 3V0-25.25 VCAP VCF Networking practice questions. 17 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
3V0-25.25 practice questions
Question 1
An administrator has a vSphere 8.0 environment that is not currently running NSX.
How can the administrator converge this vSphere 8 environment into a VMware Cloud Foundation (VCF) management domain?
- A. Manually upgrade the vSphere 8.0 environment to version 9.0 and use the VCF installer to converge the vSphere 9.0 environment into a new VCF instance.
- B. Manually upgrade the vSphere 8.0 environment to version 9.0 and manually install NSX 9.x and use the VCF installer to converge the vSphere 9.0 with NSX 9.0 environment into a new VCF instance.
- C. Manually upgrade the vSphere 8.0 environment to version 9.0 and use VCF Operations to converge the vSphere 9.0 environment into a new VCF instance.
- D. Manually install NSX 9 into the vSphere 8.0 environment and use the VCF installer to converge the vSphere 8.0 with NSX 9.0 environment into a new VCF instance.
Show answer and explanation ▾
Correct answer: B
A vCenter that has no NSX registered must be at version 9.0 before the VCF Installer can converge it. Here vSphere is upgraded to 9.0, NSX 9 is installed, and the VCF Installer then converges the vSphere 9.0 and NSX 9.0 environment into a new VCF instance.
Why the other options are wrong:
- A. This path does not put NSX 9 in place before the VCF Installer is run.
- C. VCF Operations is not the tool that converges existing infrastructure into a new VCF instance.
- D. This path leaves vSphere at 8.0 instead of upgrading it to 9.0 first.
Question 2
A cloud service provider runs VPCs with differing traffic patterns:
Some VPCs are generating high large North/South flows.
Most of the VPCs generate very little traffic.
The architect needs to optimize Edge dataplane resource consumption while ensuring that noisy VPCs do not impact others.
Which optimization satisfies the requirement?
- A. Use multiple Edge clusters and distribute VRF-backed VPCs based on traffic profiles.
- B. Convert high-traffic VPCs into VLAN-backed segments attached directly to Tier-0 gateways.
- C. Reduce the number of VPCs by consolidating VPCs into shared namespaces.
- D. Assign one dedicated Edge node per high-traffic VPC.
Show answer and explanation ▾
Correct answer: A
Placing the heavy VPCs on their own Edge cluster and the light ones on another keeps noisy traffic from consuming the Edge resources of the others, while the Edge resources are still shared among the quiet VPCs.
Why the other options are wrong:
- B. Moving VPCs to VLAN-backed segments gives up the VPC model and does not isolate Edge load.
- C. Consolidating VPCs mixes tenants together and does not isolate noisy traffic.
- D. A dedicated Edge node per high-traffic VPC wastes resources and does not scale.
Question 3
To which component does the hyperbus interface (vmk50) provide network connectivity?
- A. containers running on ESX transport nodes
- B. virtual machines and containers running across transport nodes
- C. virtual machines running on the same hypervisor
- D. virtual machines running in the same segment
Show answer and explanation ▾
Correct answer: B
The hyperbus interface vmk50 is a VMkernel interface that NSX creates on ESX transport nodes for container networking. NSX uses it to provide network connectivity to virtual machines and the containers they host.
Why the other options are wrong:
- A. The hyperbus interface is not limited to containers running directly on ESX transport nodes.
- C. Connectivity between virtual machines on one hypervisor does not depend on the hyperbus interface.
- D. Connectivity inside a segment is provided by the segment itself, not by vmk50.
Question 4
An administrator is troubleshooting why workloads in NSX cannot reach the external network 10.100.0.0/16.
The Tier-0 Gateway is in Active/Active mode and has the following configuration:
Uplink-1 (VLAN 100):
192.168.100.0/24 → router R1 at 192.168.100.1 Uplink-2 (VLAN 101): 192.168.101.0/24 → router R2 at 192.168.101.1
A static route for 10.100.0.0/16 was added with both next-hops (192.168.100.1 and 192.168.101.1) The Scope of this route is set to Uplink-1 Symptoms:
Virtual Machines (VMs) cannot reach 10.100.0.0/16 Traceroute from the VM stops at the Tier-0 gateway with "Destination Net Unreachable" Pings from the Edge nodes to both 192.168.100.1 and 192.168.101.1 are success
What explains why workloads in NSX cannot reach the external network?
- A. The physical routers are missing return routes.
- B. The next-hops should have been configured as the Tier-0's own uplink IPs instead of the routers IPs.
- C. Static routes do not support Equal Cost Multi-Pathing (ECMP) in NSX.
- D. The static route Scope is set to only one uplink interface, but the next-hops are on two different VLANs.
Show answer and explanation ▾
Correct answer: D
The Scope of a static route limits it to the selected interface. With Scope set to Uplink-1 only, the next hop on VLAN 101 cannot be reached through that interface, so the route with next hops on two different VLANs is not installed as intended and the gateway returns Destination Net Unreachable.
Why the other options are wrong:
- A. Missing return routes would not make the Tier-0 gateway itself report the network as unreachable.
- B. A static route next hop is the neighboring router address, not the gateway's own uplink address.
- C. NSX static routes do support multiple next hops with ECMP.
Question 5
The NSX Manager is reporting the following open alarm:
Remote Logging Not Configured The administrator has verified that remote logging is enabled for the NSX Manager and NSX Edge nodes. However, the alarm is still open in NSX Manager.
Which statement explains why the Remote Logging Not Configured alarm is still open?
- A. The Remote Logging Not Configured alert has been suppressed in the NSX Manager.
- B. Operations for Logs has not been enabled in VCF Operations Fleet Management.
- C. One or more ESX nodes are not currently configured to forward log messages to a remote logging server.
- D. The administrator needs to log out and log back in to the NSX Manager UI to refresh the alert status.
Show answer and explanation ▾
Correct answer: C
The Remote Logging Not Configured alarm stays open until every node type covered by the check forwards logs to a remote server. The NSX Managers and Edge nodes are configured, so one or more ESX nodes are still not forwarding their logs.
Why the other options are wrong:
- A. A suppressed alarm would not be shown as open.
- B. The alarm checks syslog forwarding on the nodes, not a setting in VCF Operations Fleet Management.
- D. Signing in again does not change the state of an alarm.
Question 6
How should the Global Managers (GMs) and Local Manager (LM)s be distributed to ensure high availability and optimal performance in a multisite NSX Federation deployment comprised of three sites? (Choose two.)
- A. The GM should be a single appliance placed in a central cloud environment to simplify connectivity, relying on vSphere HA for availability.
- B. The GM cluster should be deployed across three sites.
- C. LMs are only needed on the primary site. Secondary sites can manage their local data plane directly via the GM.
- D. Each NSX site must have its own LM cluster that reports to the GM.
- E. LMs should only be deployed as single nodes to reduce overhead.
Show answer and explanation ▾
Correct answer: B, D
Spreading the Global Manager cluster across the three sites keeps global management available when a site is lost. Each site also needs its own Local Manager cluster, which manages that site's data plane and reports to the Global Manager.
Why the other options are wrong:
- A. A single Global Manager appliance is a single point of failure, and vSphere HA does not give site-level availability.
- C. Every site needs a Local Manager, the Global Manager does not manage a site's data plane directly.
- E. Single-node Local Managers do not provide high availability.
Question 7
An architect needs to allow users to deploy multiple copies of a test lab with public access to the internet.
The design requires the same machine IPs be used for each deployment.
What configuration will allow each lab to connect to the public internet?
- A. Configure firewall rules to isolate the traffic going to the public internet.
- B. Configure DNAT rules on the Tier-1 gateway.
- C. Configure SNAT rules on the Tier-0 gateway.
- D. Configure isolation on the NSX segment.
Show answer and explanation ▾
Correct answer: C
Source NAT replaces the private lab addresses with routable addresses as traffic leaves toward the internet, so the lab machines do not need unique addresses of their own. In this design the SNAT rules are configured on the Tier-0 gateway, the gateway that connects to the external network.
Why the other options are wrong:
- A. Firewall rules filter traffic, they do not translate overlapping private addresses.
- B. DNAT handles inbound connections to a workload, not outbound access to the internet.
- D. Isolating the segment removes connectivity instead of providing internet access.
Question 8
An administrator created a new Tier-1 Gateway and is attempting to change the connected gateway for a deployed segment to use the new gateway.
In the UI, when the administrator clicks the Connected Gateway dropdown, the new Tier-1 gateway is not shown as an available gateway.
What would prevent the new Tier-1 gateway from showing in the list of available gateways?
- A. The Tier-1 Gateway is not connected to an NSX Edge Cluster.
- B. The Tier-1 Gateway and NSX Segment are connected to different Tier-0 Gateways.
- C. The Tier-1 Gateway and NSX Segment are in different transport zones.
- D. The Tier-1 Gateway connectivity policy is set to "None".
Show answer and explanation ▾
Correct answer: A
A Tier-1 gateway that is not associated with an NSX Edge cluster has only its distributed component and no service router. In this scenario that missing Edge cluster association is what keeps the new gateway out of the Connected Gateway list for the deployed segment.
Why the other options are wrong:
- B. A segment can be moved to a Tier-1 gateway that uses a different Tier-0 gateway.
- C. A Tier-1 gateway is not bound to a transport zone in a way that hides it from the list.
- D. The connectivity policy setting is not what removes the gateway from the list.
Question 9
During a design review, the administrator is asked to explain which underlying technology enables the NSX Edge to perform fast packet processing and achieve near line-rate performance for Virtual Network Functions (VNFs).
Which technology is leveraged in the NSX Edge for fast packet processing?
- A. Data Plane Development Kit (DPDK)
- B. AMD Power Now
- C. Intel Speed Step
- D. Non-Uniform Memory Access (NUMA)
Show answer and explanation ▾
Correct answer: A
The NSX Edge data path is built on the Data Plane Development Kit, which processes packets in user space with poll mode drivers. Bypassing the kernel network stack is what gives the Edge its fast packet processing.
Why the other options are wrong:
- B. AMD PowerNow is a processor power saving feature, not a packet processing technology.
- C. Intel SpeedStep is a processor power saving feature, not a packet processing technology.
- D. NUMA describes memory and processor layout, it is not the packet processing framework of the Edge.
Question 10
When using a DHCP Relay on a segment, which design restriction that must be considered?
- A. DHCP settings, DHCP options, and static bindings can be configured on the segment.
- B. DHCP Relay service is available to all the other segments in the network.
- C. DHCP client requests cannot be relayed to the external DHCP servers.
- D. DHCP settings, DHCP options, and static bindings cannot be configured on the segment.
Show answer and explanation ▾
Correct answer: D
With DHCP Relay on a segment, addresses and options come from the external DHCP server. DHCP settings, DHCP options and static bindings therefore cannot be configured on the segment itself.
Why the other options are wrong:
- A. These items cannot be configured on a segment that uses DHCP Relay.
- B. A relay configured on one segment does not serve all other segments.
- C. Relaying client requests to external DHCP servers is exactly what DHCP Relay does.
Question 11
An administrator is registering secondary site Local Manager (LM) to the Global Manager (GM). The secondary site LM has three NSX Manager Virtual Machine (VMs). The administrator is preparing the connection details to provide during registration.
What must be provided during LM registration to the GM?
- A. The external load balancer Virtual IP (VIP) without requiring API certificate updates on individual LM VMs.
- B. The IP address of the primary NSX Manager VM in the cluster.
- C. The LM Cluster Virtual IP (VIP) or FQDN of the LM Cluster VIP.
- D. All three individual LM VM IP addresses in a comma-separated list for redundant connectivity.
Show answer and explanation ▾
Correct answer: C
A Local Manager cluster of three NSX Manager nodes is registered with the Global Manager through its cluster VIP, or the FQDN of that VIP. This keeps the connection available when any single manager node is down.
Why the other options are wrong:
- A. This is not the connection detail that registration asks for.
- B. Registering one node's address ties the connection to a single manager.
- D. Registration does not take a comma-separated list of node addresses.
Question 12
An administrator is enabling IPv6-to-IPv4 communication for workloads hosted in an NSX environment. The workloads use IPv6-only addressing, but the external systems they must reach are IPv4-only. To provide this translation service, the administrator decides to configure NAT64.
Which two following characteristics about NAT64 are true? (Choose two.)
- A. NAT64 is supported on Tier-1 gateways only.
- B. NAT64 requires the Tier-1 gateway to be configured in active-active mode.
- C. NAT64 is supported on Tier-0 and Tier-1 gateways.
- D. NAT64 requires the Tier-1 gateway to be configured in active-standby mode.
- E. NAT64 is stateless and requires gateways to be deployed in active-standby mode.
Show answer and explanation ▾
Correct answer: C, D
NAT64 translates IPv6 traffic to IPv4 and can be configured on both Tier-0 and Tier-1 gateways. It keeps binding and session state, so a Tier-1 gateway that provides it runs in active-standby mode.
Why the other options are wrong:
- A. NAT64 is not limited to Tier-1 gateways.
- B. A Tier-1 gateway does not run NAT64 in active-active mode.
- E. NAT64 is stateful, not stateless.
Question 13
An administrator is troubleshooting intermittent connectivity failures between two workloads connected to NSX VLAN segments using Traceflow.
In-band Network Telemetry (INT) has been enabled in the NSX Global Configuration.
How does Traceflow identify issues in a VLAN network?
- A. Injects ICMP traffic into the data plane and observes the results in the control plane.
- B. Compares intended network state in the control plane with Tunnel End Point (TEP) keepalives in the data plane.
- C. Traceflow cannot be enabled to analyze VLAN network segments in NSX.
- D. Injects synthetic traffic into the data plane and observes the results in the control plane.
Show answer and explanation ▾
Correct answer: D
Traceflow injects a synthetic packet into the data plane and collects the observations reported by each component along the path. Those results are returned through the control plane, which shows where the packet was forwarded or dropped.
Why the other options are wrong:
- A. Traceflow injects a crafted synthetic packet, it is not limited to ICMP traffic.
- B. Traceflow does not work by comparing control plane state with TEP keepalives.
- C. Traceflow can analyze VLAN segments in this configuration.
Question 14
An administrator is troubleshooting an issue where workloads connected to a Tier-1 Gateway named T1-App can no longer reach external North/South destinations.
The Tier-1 is connected to an Active/Standby Tier-0 Gateway named T0-Prod.
Symptoms observed:
VMs on segments attached to T1-App can ping each other.
VMs on T1-App cannot reach any external IP outside T0-Prod.
From a VM on the segment, ping to the T1-App Distributed Router (DR) IP succeeds.
Ping from the VM to the T1-App Service Router (SR) fails.
The Edge cluster hosting the T1-App SR shows both Edge nodes Up and Healthy.
No failover has occurred - the same Edge node is still shown as Active for T1-App.
What is the most likely cause of this issue?
- A. The overlay network between DR and SR has an MTU mismatch.
- B. Localized control plane is enabled on the Tier-1 causing the SR to remain admin-down.
- C. Route advertisement from T1-App to T0-Prod for 100.64.x.x/31 is disabled.
- D. Static default route is missing on the Tier-1 DR component.
Show answer and explanation ▾
Correct answer: C
East-west traffic and the DR respond, both Edge nodes are healthy and no failover occurred, so the fault lies in routing between T1-App and T0-Prod. With route advertisement from T1-App to T0-Prod disabled, the Tier-0 gateway has no path back to the Tier-1 networks and north-south traffic fails.
Why the other options are wrong:
- A. An MTU mismatch would drop large packets, not every ping.
- B. This is not a setting that explains the symptoms listed.
- D. A missing static route on the DR is not what the symptoms point to.
Question 15
In an NSX environment, an administrator is observing low throughput and intermittent congestion between the Tier-0 Gateway and the upstream physical routers. The environment was designed for high availability and load balancing, using two Edge Nodes deployed in Active/Active mode.
Which two actions would address low throughput and congestion? (Choose two.)
- A. Enable ECMP on the Tier-0 gateway.
- B. Convert Tier-1 gateways to be edgeless.
- C. Add an additional vNIC to the NSX Edge node.
- D. Deploy additional Edge nodes.
- E. Disable NAT on the Tier-0 gateway.
Show answer and explanation ▾
Correct answer: A, D
Enabling ECMP on the Tier-0 gateway spreads north-south traffic across all available uplink paths. Deploying additional Edge nodes adds more active forwarding capacity to the Active/Active gateway, which relieves the congestion.
Why the other options are wrong:
- B. Removing Edge services from Tier-1 gateways does not add capacity toward the physical routers.
- C. An extra vNIC on an Edge node does not by itself add forwarding capacity.
- E. Disabling NAT does not address uplink congestion.
Question 16
An administrator is onboarding a new research VPC under its R&D project.
Requirements include:
Application teams must be isolated while still consuming shared DNS.
The physical core network exposes BGP only on VLAN 300-dc-edge-uplink-pg that terminates on the Edge cluster.
Any north-south connectivity to the datacenter must traverse Edge.
East-west paths should remain on hosts where possible.
No direct Internet egress is allowed.
Which combination of Transit Gateway (TGW) mode, VPC subnet type and routing configuration meets the requirements?
- A. Distributed TGW with Private-VPC subnet, policy-based routing to shared services; static routes for datacenter services on each segment.
- B. Distributed TGW, external attachment for the datacenter core and Private-TGW Subnet to shared services; import datacenter routes via BGP on transport nodes and suppress export.
- C. Centralized TGW with Private-TGW Subnet to datacenter core and external to shared services; advertise all VPC routes but rely on upstream ACLs to block.
- D. Centralized TGW, external attachment on the Edge for datacenter core and Private-TGW Subnet to shared services; import only required datacenter prefixes and disable/filter export of VPC routes.
Show answer and explanation ▾
Correct answer: D
BGP is available only on the VLAN that terminates on the Edge cluster, so a centralized transit gateway with an external attachment on the Edge is required for north-south traffic. Private-TGW subnets reach shared DNS without being advertised outside, and importing only required prefixes while filtering the export of VPC routes prevents internet egress.
Why the other options are wrong:
- A. A distributed transit gateway does not send north-south traffic through the Edge.
- B. A distributed transit gateway does not use the Edge, and BGP is not run on transport nodes here.
- C. Advertising all VPC routes and relying on upstream ACLs does not meet the no egress requirement.
Question 17
The administrator has been tasked with differentiating the roles of Global Manager (GM) and Local Manager (LM) to determine where specific configurations should be performed.
Which statements describe the difference between Global Manager and Local Manager?
- A. The Global Manager creates and manages global network objects, while Local Manager enforce them.
- B. The Local Manager (LM) creates and manages local network objects, while Global Managers enforce them.
- C. Policy creation must always be performed at each Local Manager and synchronized manually with the Global Manager.
- D. The Global Manager only provides reporting functions.
Show answer and explanation ▾
Correct answer: A
The Global Manager is where global network and security objects are created and managed for all sites. Each Local Manager receives that configuration and enforces it on the data plane of its own site.
Why the other options are wrong:
- B. Global Managers do not enforce configuration, the Local Managers do.
- C. Global policy is created once on the Global Manager, not on each Local Manager with manual synchronization.
- D. The Global Manager is a configuration point, not only a reporting tool.
That was 17 of 58.
The full VMware 3V0-25.25 VCAP VCF Networking pack has all 58 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 18 free as one PDF by email. Get the Half Pack →
About the 3V0-25.25 exam
These 17 VMware 3V0-25.25 VCAP VCF Networking questions are free here. The free PDF has 18, free by email.
They are drawn from the same bank as the full 3V0-25.25 pack, which has 58 questions in total.