Versa Networks VNX100 Practice Questions with Explanations
Free Versa Networks VNX100 practice questions. 19 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
VNX100 practice questions
Question 1
In a Versa Secure SD-WAN solution, what are three functions of a hub controller? (Choose three.)
- A. It does CPE lifecycle management.
- B. It is a control plane node.
- C. It is a data plane node.
- D. It provides visibility and control.
- E. It can be a staging server.
Show answer and explanation ▾
Correct answer: B, C, E
A hub controller combines two roles in one node. As a controller it is part of the control plane and can act as the staging server that new branches first connect to, and as a hub it also forwards user traffic in the data plane.
Why the other options are wrong:
- A. CPE lifecycle management is done by Versa Director, not by a hub controller.
- D. Visibility is provided by Versa Analytics and Director, not by a hub controller.
Question 2
You have configured a Versa Secure SD-WAN solution with a Full Mesh topology.
In this scenario, which statement is true?
- A. The CPE devices send SLA probes on the active forwarding path only.
- B. The CPE devices send SLA probes on all possible transport paths between devices.
- C. The CPE devices send SLA probes to the Versa Controller, and the Versa Controller distributes active site statistics to other CPEs.
- D. The CPE devices send SLA probes to the Versa Controller, and the Versa Controller relays the probes to CPE devices.
Show answer and explanation ▾
Correct answer: B
In a full mesh every branch CPE can reach every other branch directly, so each CPE sends SLA probes to its peers over every transport path it has, such as MPLS and internet. That gives it live loss, delay and jitter figures for each path so traffic can be steered to the best one.
Why the other options are wrong:
- A. Probing only the active path would leave the CPE blind to the quality of its backup paths, so it could not switch traffic based on SLA.
- C. SLA probes run directly between the branch CPEs; the Controller handles the control plane and does not collect and share path statistics this way.
- D. The Controller does not relay data plane probes; the CPEs probe each other directly across the transports.
Question 3
A customer has a single Versa Analytics cluster deployed in a data center. The Versa Director and Versa Controller nodes are distributed between the data center and the disaster recovery sites. The data center goes down for one day.
In this scenario, which statement is true?
- A. SD-WAN CPE live monitoring will be lost during the one-day downtime.
- B. New SD-WAN CPE cannot be deployed during the one-day downtime.
- C. Reachability between SD-WAN CPE will be lost during the one-day downtime.
- D. Logging and reporting will be lost during the one-day downtime.
Show answer and explanation ▾
Correct answer: D
Versa Analytics is the component that collects logs and builds reports. With its only cluster in the failed data center, logging and reporting stop for that day, while the Director and Controller nodes at the disaster recovery site keep management and the control plane running.
Why the other options are wrong:
- A. Live monitoring of CPEs is done from Versa Director, which still has nodes at the disaster recovery site.
- B. New CPEs are onboarded through Versa Director and the Controllers, and both still run at the disaster recovery site.
- C. The branches keep their tunnels and the Controllers at the disaster recovery site keep the control plane up, so CPE reachability is not lost.
Question 4
What is the default load balancing algorithm set in an SD-WAN Forwarding Profile?
- A. High Available Bandwidth
- B. Per Packet
- C. Weighted Round Robin
- D. Per Flow
Show answer and explanation ▾
Correct answer: C
By default a forwarding profile load balances traffic across the eligible paths using weighted round robin.
Why the other options are wrong:
- A. High available bandwidth is an optional selection method, not the default.
- B. Per packet load balancing must be chosen explicitly.
- D. Per flow describes how traffic is kept on one path, not the default selection algorithm asked for here.
Question 5
You are an administrator of a Versa Secure SD-WAN network. Due to a recent security event, you need to apply a new URL filtering profile on all of the SD-WAN CPEs.
In this scenario, which template would you use to configure URL filtering?
- A. QoS Template
- B. Stateful Firewall Template
- C. NexGen Firewall Template
- D. Common Template
Show answer and explanation ▾
Correct answer: C
URL filtering is a next-generation firewall feature, so its profile is configured in an NGFW service template, which can then be attached to the device groups so every CPE receives it.
Why the other options are wrong:
- A. A QoS template covers traffic classes, priority and shaping, not URL filtering.
- B. A stateful firewall template does not include URL filtering profiles.
- D. A common template is not where URL filtering is configured.
Question 6
A network operator wants to monitor a Versa CPE interface live data.
In this scenario, how would you accomplish this task?
- A. using Versa Controller
- B. using Versa Director
- C. using Versa Analytics
- D. using the Versa CPE GUI
Show answer and explanation ▾
Correct answer: B
Versa Director has a Monitor view that queries the CPE directly and shows live data, including the current state and statistics of each interface.
Why the other options are wrong:
- A. The Controller handles control plane functions and is not the monitoring tool.
- C. Versa Analytics shows historical and near real-time data built from logs, not live interface data.
- D. The CPE GUI is not the tool an operator uses for this task in a Versa SD-WAN network.
Question 7
Which two descriptions about CoS functions in a Versa branch are true? (Choose two.)
- A. Remarking separates traffic based on Layer 3, Layer 4, and Layer 7 fields.
- B. Classification alters the CoS fields in outgoing traffic.
- C. Queuing defines the priority of traffic and weights.
- D. Scheduling controls the order of packets sent.
Show answer and explanation ▾
Correct answer: C, D
Queuing places traffic into queues that carry a priority and a weight, and scheduling then decides the order in which packets leave those queues on the interface.
Why the other options are wrong:
- A. Separating traffic by Layer 3, Layer 4 and Layer 7 fields is classification, not remarking.
- B. Altering the CoS fields in outgoing traffic is remarking, not classification.
Question 8
Which two statements about Versa SD-WAN live monitoring of Versa CPEs are true? (Choose two.)
- A. Versa Analytics provide real-time monitoring capabilities for all services running in Versa CPE.
- B. Versa Director provides real-time monitoring capabilities for all services running in Versa CPE.
- C. Versa Analytics has built-in ping, traceroute, tcpdump, and speed test tools.
- D. Versa Director has built-in ping, traceroute, tcpdump, and speed test tools.
Show answer and explanation ▾
Correct answer: B, D
Versa Director is the live monitoring tool: its Monitor view shows the real-time state of the services running on a CPE, and it includes ping, traceroute, tcpdump and speed test tools that run against the device.
Why the other options are wrong:
- A. Versa Analytics reports on collected logs and is not the real-time monitoring tool for all CPE services.
- C. The ping, traceroute, tcpdump and speed test tools are not part of Versa Analytics.
Question 9
Which two parts in the SD-WAN policy rules are used to steer traffic? (Choose two.)
- A. Logging
- B. Schedules
- C. Applications
- D. Anti-virus
Show answer and explanation ▾
Correct answer: B, C
An SD-WAN policy rule selects traffic with match criteria and then steers it with a forwarding profile. Applications and schedules are both match criteria in the rule, so they decide which traffic is steered and when.
Why the other options are wrong:
- A. Logging records rule hits and does not steer traffic.
- D. Anti-virus is a security feature and is not part of SD-WAN policy rules.
Question 10
By default, when configuring DIA through workflows, which protocol runs between the tvi interfaces connecting an Internet VR with the LAN VRF?
- A. static routing
- B. OSPF
- C. BGP
- D. VRRP
Show answer and explanation ▾
Correct answer: C
The DIA workflow links the Internet transport VR and the LAN VRF with a pair of tvi interfaces and runs BGP between them, which is how the default route reaches the LAN VRF.
Why the other options are wrong:
- A. The workflow does not use static routes between the tvi interfaces by default.
- B. OSPF is not the protocol the workflow sets up on the tvi pair.
- D. VRRP is a gateway redundancy protocol and does not exchange routes.
Question 11
Which two components are required when creating a device using workflows? (Choose two.)
- A. Device Template
- B. Common Template
- C. Device Group
- D. Service Template
Show answer and explanation ▾
Correct answer: A, C
Every device belongs to a device group, and the device group is tied to a device template that supplies the configuration. Both must exist before the device workflow can be completed.
Why the other options are wrong:
- B. A common template is optional and is not required to create a device.
- D. Service templates are optional additions to a device group.
Question 12
An administrator wants to have a daily report of the bandwidth usage for all sites in the network without logging into the Versa Analytics portal.
In this scenario, which statement is true?
- A. Versa Analytics can generate customized daily reports, but it cannot send the reports to the administrator.
- B. Versa Analytics can generate and schedule customized reports by e-mail, based on a user-defined reporting template.
- C. The e-mail schedule needs to be defined on the Versa Director to trigger reports in Versa Analytics.
- D. Versa Director can generate customized reports by e-mail, based on a pre-configured reporting template.
Show answer and explanation ▾
Correct answer: C
Scheduled reports are set up through the Director interface, under the Analytics tab, where the report schedule and the e-mail recipients are defined. Analytics then generates the report and sends it at the scheduled time.
Why the other options are wrong:
- A. Reports can be sent to the administrator by e-mail.
- B. The e-mail schedule is not set in Analytics on its own; it is defined through the Director interface.
- D. The reports are generated by Versa Analytics, not by Versa Director.
Question 13
You are asked to configure an SD-WAN branch so that Internet bound traffic uses the local Internet link.
In this scenario, which template provides this configuration?
- A. QoS Template
- B. Application Template
- C. Post-staging Template
- D. Service Chain Template
Show answer and explanation ▾
Correct answer: C
Direct Internet access is part of the main device configuration, so it is set with the split tunnel options in the post-staging template, which is the device template applied to the branch.
Why the other options are wrong:
- A. A QoS template handles traffic classes, priority and shaping.
- B. An application template is not where local Internet breakout is configured.
- D. A service chain template is for chaining third-party network functions.
Question 14
Which two statements about Versa Secure Access (VSA) are true? (Choose two.)
- A. The VSA gateway is always hosted in a public cloud.
- B. LDAP can be used to authenticate remote secure access users.
- C. VSA supports multi-factor authentication.
- D. The VSA client does not support split tunneling.
Show answer and explanation ▾
Correct answer: B, C
Versa Secure Access authenticates remote users against directory services such as LDAP and supports multi-factor authentication for stronger identity checks.
Why the other options are wrong:
- A. The gateway is not restricted to a public cloud and can run on other gateways.
- D. The VSA client supports split tunneling.
Question 15
Your Versa CPE security policy rule is configured to generate and send logging information on policy hits using Default Logging Profile.
In this scenario, which Versa component would allow you to view the logs?
- A. Versa Analytics
- B. Versa Director
- C. Versa Controller
- D. Versa Secure Access Gateway
Show answer and explanation ▾
Correct answer: A
Logs produced by policy hits are exported by the CPE to Versa Analytics, which stores them and presents them in its log views and dashboards.
Why the other options are wrong:
- B. Versa Director manages configuration and live monitoring and does not store the policy logs.
- C. The Controller handles the control plane and does not display logs.
- D. The Secure Access gateway serves remote users and is not the log viewer.
Question 16
A group of users notified you that they are experiencing a network outage.
In this scenario, which two Versa components would you use to verify the live status of the WAN links? (Choose two.)
- A. Versa Director device monitoring dashboard
- B. Versa Analytics SD-WAN dashboard
- C. Versa Director troubleshooting tools
- D. Versa Analytics sites availability dashboard
Show answer and explanation ▾
Correct answer: A, C
Live status comes from Versa Director. Its device monitoring dashboard queries the CPE in real time, and its troubleshooting tools such as ping and traceroute test the WAN links directly.
Why the other options are wrong:
- B. The Analytics SD-WAN dashboard is built from collected logs and does not show live status.
- D. The Analytics availability dashboard reports over time and is not a live view.
Question 17
A customer has a site activation planned using script-based provisioning; however, while unboxing the SD-WAN CPE, the engineer notices that the console cable is missing.
In this scenario, what would an engineer do to initiate the script-based provisioning?
- A. Connect a laptop to any LAN port on the device.
- B. Connect a laptop to any WAN port on the device.
- C. Connect a laptop to the management port on the device.
- D. Connect a laptop to the auxiliary port on the device.
Show answer and explanation ▾
Correct answer: C
The staging script is run from the CPE shell. Without a console cable, the engineer can reach the shell by connecting a laptop to the management port and opening an SSH session.
Why the other options are wrong:
- A. LAN ports are not used to reach the device shell before activation.
- B. WAN ports connect to the transport and are not used for local shell access.
- D. An auxiliary port is not used to start script-based provisioning.
Question 18
Which three statements about Versa head-end component deployment are true? (Choose three.)
- A. The components can be deployed on a bare metal server.
- B. The components can be deployed as a mix of bare metal and virtual machines.
- C. The components can be deployed as virtual machines.
- D. The components can be deployed as bare metal on non-x86 appliances.
Show answer and explanation ▾
Correct answer: A, B, C
Versa Director, Analytics and Controller run on x86 hardware and can be installed on bare metal servers, as virtual machines, or as a combination of the two.
Why the other options are wrong:
- D. The head-end software runs on x86 platforms, so non-x86 appliances are not supported.
Question 19
Which statement about URL-based ZTP is true?
- A. URL-based ZTP is triggered using a console connection.
- B. URL-based ZTP is supported only for Versa Gateway configurations.
- C. URL-based ZTP supports only DHCP-based WAN links.
- D. URL-based ZTP uses a link that can be sent over e-mail.
Show answer and explanation ▾
Correct answer: D
With URL-based ZTP the provider generates an activation link for the device and can send it by e-mail. The installer opens the link from a laptop connected to the CPE to start activation.
Why the other options are wrong:
- A. A console connection is used for script-based activation, not URL-based ZTP.
- B. URL-based ZTP is used to activate branch CPE devices, not only gateways.
- C. URL-based ZTP is not limited to DHCP WAN links.
That was 19 of 88.
The full Versa Networks VNX100 pack has all 88 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 21 free as one PDF by email. Get the Half Pack →
About the VNX100 exam
These 19 Versa Networks VNX100 questions are free here. The free PDF has 21, free by email.
They are drawn from the same bank as the full VNX100 pack, which has 88 questions in total.