Splunk SPLK-4001 Practice Questions with Explanations

Free Splunk SPLK-4001 practice questions. 20 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.

SPLK-4001 practice questions

Question 1

What are the best practices for creating detectors? (Choose all that apply.)

  • A. View data at highest resolution.
  • B. Have a consistent value.
  • C. View detector in a chart.
  • D. Have a consistent type of measurement.
Show answer and explanation ▾

Correct answer: A, D

Detectors evaluate data at its native resolution, so viewing the signal at the highest resolution shows what the detector will actually see. The signal should also use one consistent type of measurement, so a single threshold means the same thing for every time series.

Why the other options are wrong:

  • B. A signal's values are expected to change over time, so a consistent value is not a best practice.
  • C. Viewing a detector in a chart is a way to look at it, not a best practice for building one.

Question 2

An SRE came across an existing detector that is a good starting point for a detector they want to create. They clone the detector, update the metric, and add multiple new signals. As a result of the cloned detector, which of the following is true?

  • A. The new signals will be reflected in the original detector.
  • B. The new signals will be reflected in the original chart.
  • C. You can only monitor one of the new signals.
  • D. The new signals will not be added to the original detector.
Show answer and explanation ▾

Correct answer: D

Cloning makes an independent copy. Changes made to the copy, such as a new metric or extra signals, stay in the copy and leave the original detector as it was.

Why the other options are wrong:

  • A. The clone is separate, so edits to it do not flow back to the original detector.
  • B. The original chart is also unchanged by edits made to the clone.
  • C. A detector can monitor several signals, so there is no limit of one.

Question 3

Which of the following are supported rollup functions in Splunk Observability Cloud?

  • A. average, latest, lag, min, max, sum, rate
  • B. std_dev, mean, median, mode, min, max
  • C. sigma, epsilon, pi, omega, beta, tau
  • D. 1min, 5min, 10min, 15min, 30min
Show answer and explanation ▾

Correct answer: A

Rollups decide how datapoints within one resolution window are combined into a single value. The supported ones are average, latest, lag, min, max, sum and rate.

Why the other options are wrong:

  • B. Standard deviation, median and mode are not rollup functions, which are a fixed set.
  • C. These are Greek letters, not functions.
  • D. These are time intervals (resolutions), not rollup functions.

Question 4

A Software Engineer is troubleshooting an issue with memory utilization in their application. They released a new canary version to production and now want to determine if the average memory usage is lower for requests with the 'canary' version dimension. They've already opened the graph of memory utilization for their service.

How does the engineer see if the new release lowered average memory utilization?

  • A. On the chart for plot A, select Add Analytics, then select Mean:Transformation. In the window that appears, select the Group By field.
  • B. On the chart for plot A, scroll to the end and click Enter Function, then enter 'A/B-1'.
  • C. On the chart for plot A, select Add Analytics, then select Mean:Aggregation. In the window that appears, select 'version' Group By field.
  • D. On the chart for plot A, click the Compare Means button. In the window that appears, type 'version'.
Show answer and explanation ▾

Correct answer: C

To compare average memory across versions, you aggregate the signal with a mean and group it by the version dimension. That gives one average line for each version, including canary.

Why the other options are wrong:

  • A. A mean transformation works over time on each series and does not group across series by version.
  • B. A formula such as A/B-1 compares two plots and does not group by a dimension.
  • D. There is no Compare Means button in the chart.

Question 5

One server in a customer's data center is regularly restarting due to power supply issues.

What type of dashboard could be used charts and create detectors for this server?

  • A. Single-instance dashboard
  • B. Machine dashboard
  • C. Multiple-service dashboard
  • D. Server dashboard
Show answer and explanation ▾

Correct answer: A

A single-instance dashboard focuses on one host or instance, so you can chart its metrics and create detectors for that one server.

Why the other options are wrong:

  • B. A machine dashboard is not a dashboard type in Splunk Observability Cloud.
  • C. A multiple-service dashboard looks across services, not at one server.
  • D. A server dashboard is not a dashboard type in Splunk Observability Cloud.

Question 6

To refine a search for a metric a customer types host:test-*.

What does this filter return?

  • A. Only metrics with a dimension of host and a value beginning with test-.
  • B. Error
  • C. Every metric except those with a dimension of host and a value equal to test-.
  • D. Only metrics with a value of test-beginning with host.
Show answer and explanation ▾

Correct answer: A

A filter is written as dimension:value, and the asterisk is a wildcard. host:test-* therefore matches only metrics that have a host dimension whose value starts with test-.

Why the other options are wrong:

  • B. The filter is valid syntax and does not produce an error.
  • C. Excluding matches needs a NOT filter, written with an exclamation mark, which is not used here.
  • D. host is the dimension name and test- is the start of the value, not the other way around.

Question 7

A customer operates a caching web proxy. They want to calculate the cache hit rate for their service.

What is the best way to achieve this?

  • A. Percentages and ratios
  • B. Timeshift and Bottom N
  • C. Timeshift and Top N
  • D. Chart Options and metadata
Show answer and explanation ▾

Correct answer: A

A cache hit rate is hits divided by total requests. Plotting both metrics and combining them in a formula gives the ratio, which can be shown as a percentage.

Why the other options are wrong:

  • B. Timeshift compares against an earlier period and Bottom N ranks series, neither of which calculates a rate.
  • C. Timeshift compares against an earlier period and Top N ranks series, neither of which calculates a rate.
  • D. Chart options and metadata change how data is displayed and described, not how it is calculated.

Question 8

Which of the following are correct ports for the specified components in the OpenTelemetry Collector?

  • A. gRPC (4000), SignalFx (9943), Fluentd (6060)
  • B. gRPC (6831), SignalFx (4317), Fluentd (9080)
  • C. gRPC (4459), SignalFx (9166), Fluentd (8956)
  • D. gRPC (4317), SignalFx (9080), Fluentd (8006)
Show answer and explanation ▾

Correct answer: D

In the Splunk Distribution of the OpenTelemetry Collector, OTLP over gRPC listens on port 4317, the SignalFx forwarder listens on port 9080, and Fluentd forwards logs to the Collector on port 8006.

Why the other options are wrong:

  • A. None of these three ports is the default for its component.
  • B. Port 6831 is a Jaeger port and 4317 is the gRPC port, so the components are matched to the wrong ports.
  • C. None of these three ports is the default for its component.

Question 9

When writing a detector with a large number of MTS, such as memory.free in a deployment with 30,000 hosts, it is possible to exceed the cap of MTS that can be contained in a single plot.

Which of the choices below would most likely reduce the number of MTS below the plot cap?

  • A. Select the Shared option when creating the plot.
  • B. Add a filter to narrow the scope of the measurement.
  • C. Add a restricted scope adjustment to the plot.
  • D. When creating the plot, add a discriminator.
Show answer and explanation ▾

Correct answer: B

A filter restricts the plot to the time series that match it, for example one cluster or one environment. That narrows the scope of the measurement and brings the number of MTS under the limit for a single plot.

Why the other options are wrong:

  • A. There is no Shared option that reduces the number of MTS in a plot.
  • C. A restricted scope adjustment is not a plot setting.
  • D. A discriminator is not a plot setting.

Question 10

An SRE creates a new detector to receive an alert when server latency is higher than 260 milliseconds. Latency below 260 milliseconds is healthy for their service. The SRE creates a New Detector with a Custom Metrics Alert Rule for latency and sets a Static Threshold alert condition at 260 ms. How can the number of alerts be reduced?

  • A. Adjust the threshold.
  • B. Adjust the Trigger sensitivity. Duration set to 1 minute.
  • C. Adjust the notification sensitivity. Duration set to 1 minute.
  • D. Choose another signal.
Show answer and explanation ▾

Correct answer: B

With the default sensitivity the detector fires as soon as one value crosses 260 ms. Setting Trigger sensitivity to a duration of 1 minute means latency must stay above the threshold for a full minute, which removes alerts for brief spikes.

Why the other options are wrong:

  • A. Latency below 260 ms is healthy, so 260 ms is already the right threshold.
  • C. There is no notification sensitivity setting in an alert rule.
  • D. Latency is the signal the SRE needs to monitor, so choosing another signal does not solve the problem.

Question 11

Where does the Splunk distribution of the OpenTelemetry Collector store the configuration files on Linux machines by default?

  • A. /opt/splunk/
  • B. /etc/otel/collector/
  • C. /etc/opentelemetry/
  • D. /etc/system/default/
Show answer and explanation ▾

Correct answer: B

On Linux, the installer for the Splunk Distribution of the OpenTelemetry Collector places the configuration files in /etc/otel/collector/, including agent_config.yaml.

Why the other options are wrong:

  • A. /opt/splunk/ is the usual install path of Splunk Enterprise, not the Collector's configuration directory.
  • C. /etc/opentelemetry/ is not the default configuration directory of the Splunk distribution.
  • D. /etc/system/default/ is a Splunk Enterprise configuration path, not a Collector directory.

Question 12

Which of the following rollups will display the time delta between a datapoint being sent and a datapoint being received?

  • A. Jitter
  • B. Delay
  • C. Lag
  • D. Latency
Show answer and explanation ▾

Correct answer: C

The Lag rollup reports the difference between the timestamp on a datapoint and the time Splunk Observability Cloud received it, which makes it useful for spotting delayed data.

Why the other options are wrong:

  • A. Jitter is not a rollup type.
  • B. Delay is not the rollup that reports this time difference.
  • D. Latency is not a rollup type.

Question 13

Which of the following is optional, but highly recommended to include in a datapoint?

  • A. Metric name
  • B. Timestamp
  • C. Value
  • D. Metric type
Show answer and explanation ▾

Correct answer: B

A datapoint does not have to carry a timestamp, because one is assigned when the datapoint is received. Sending the timestamp is still recommended so the datapoint is recorded at the time it was actually measured.

Why the other options are wrong:

  • A. The metric name is required, because it identifies what is being measured.
  • C. The value is required, because it is the measurement itself.
  • D. The metric type is not the component described as optional but highly recommended.

Question 14

Which analytic function can be used to discover peak page visits for a site over the last day?

  • A. Maximum: Transformation (24h)
  • B. Maximum: Aggregation (1d)
  • C. Lag: (24h)
  • D. Count: (1d)
Show answer and explanation ▾

Correct answer: A

A transformation works over a moving time window for each time series. Maximum as a transformation with a 24 hour window returns the highest value seen in the last day, which is the peak number of page visits.

Why the other options are wrong:

  • B. An aggregation combines the series at each point in time and does not take a time window such as 1d.
  • C. Lag is a rollup that measures datapoint delay, not a peak value.
  • D. Count returns the number of time series reporting, not the highest value.

Question 15

What information is needed to create a detector?

  • A. Alert Status, Alert Criteria, Alert Settings, Alert Message, Alert Recipients
  • B. Alert Signal, Alert Criteria, Alert Settings, Alert Message, Alert Recipients
  • C. Alert Signal, Alert Condition, Alert Settings, Alert Message, Alert Recipients
  • D. Alert Status, Alert Condition, Alert Settings, Alert Meaning, Alert Recipients
Show answer and explanation ▾

Correct answer: C

An alert rule is built by working through five tabs in order: Alert signal, Alert condition, Alert settings, Alert message and Alert recipients.

Why the other options are wrong:

  • A. Alert Status and Alert Criteria are not tabs in the alert rule builder.
  • B. The second tab is Alert condition, not Alert Criteria.
  • D. Alert Status and Alert Meaning are not tabs in the alert rule builder.

Question 16

A customer has a large population of servers. They want to identify the servers where utilization has increased the most since last week.

Which analytics function is needed to achieve this?

  • A. Rate
  • B. Sum transformation
  • C. Timeshift
  • D. Standard deviation
Show answer and explanation ▾

Correct answer: C

Timeshift returns a signal's values from an earlier time, such as one week ago. Comparing current utilization with the shifted values shows how much each server has changed since last week.

Why the other options are wrong:

  • A. Rate shows how fast a value is changing from one moment to the next, not the difference from last week.
  • B. A sum transformation adds values over a window and does not compare two periods.
  • D. Standard deviation measures how spread out values are, not the change since last week.

Question 17

The alert recipients tab specifies where notification messages should be sent when alerts are triggered or cleared.

Which of the below options can be used? (Choose all that apply.)

  • A. Invoke a webhook URL.
  • B. Export to CSV.
  • C. Send an SMS message.
  • D. Send to email addresses.
Show answer and explanation ▾

Correct answer: A, D

The Alert recipients tab can send notifications to email addresses and can call a webhook URL, along with integrations such as chat and incident management services.

Why the other options are wrong:

  • B. Export to CSV is a way to download chart data, not a notification option.
  • C. Sending an SMS message is not an option on the Alert recipients tab.

Question 18

With exceptions for transformations or timeshifts, at what resolution do detectors operate?

  • A. 10 seconds
  • B. The resolution of the chart
  • C. The resolution of the dashboard
  • D. Native resolution
Show answer and explanation ▾

Correct answer: D

Detectors analyze data at its native resolution, the interval at which the data arrives. A transformation or timeshift in the signal can make the detector run at a coarser resolution.

Why the other options are wrong:

  • A. Detectors do not run at a fixed 10 second resolution.
  • B. Chart resolution changes with the time range being viewed and does not control a detector.
  • C. A dashboard's time range affects only how its charts are displayed, not how a detector evaluates data.

Question 19

Which of the following are true about organization metrics? (Choose all that apply.)

  • A. Organization metrics give insights into system usage, system limits, data ingested and token quotas.
  • B. Organization metrics count towards custom MTS limits.
  • C. Organization metrics are included for free.
  • D. A user can plot and alert on them like metrics they send to Splunk Observability Cloud.
Show answer and explanation ▾

Correct answer: A, C

Organization metrics are generated by Splunk Observability Cloud itself and describe system usage, system limits, ingested data and token quotas. They are provided at no charge and are not billed as custom metrics.

Why the other options are wrong:

  • B. Organization metrics do not count toward custom MTS limits.
  • D. This describes how charts and detectors are used, not what organization metrics measure or what they cost.

Question 20

Which of the following aggregate analytic functions will allow a user to see the highest or lowest n values of a metric?

  • A. Maximum / Minimum
  • B. Best / Worst
  • C. Exclude / Include
  • D. Top / Bottom
Show answer and explanation ▾

Correct answer: D

The Top and Bottom functions keep only the highest or lowest values of a metric, set either as a count of time series or as a percentage, for example the 5 hosts with the highest CPU use.

Why the other options are wrong:

  • A. Maximum and Minimum return a single highest or lowest value, not the top or bottom n series.
  • B. Best and Worst are not analytics functions.
  • C. Exclude and Include are not aggregate analytics functions.

That was 20 of 91.

The full Splunk SPLK-4001 pack has all 91 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack

Not ready yet? Get the first 21 free as one PDF by email. Get the Half Pack →

About the SPLK-4001 exam

These 20 Splunk SPLK-4001 questions are free here. The free PDF has 21, free by email.

They are drawn from the same bank as the full SPLK-4001 pack, which has 91 questions in total.

Back to blog