SolarWinds Observability Self-Hosted Network Management Practice Questions with Explanations
Free SolarWinds Observability Self-Hosted Network Management practice questions. 21 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
Observability Self-Hosted Network Management practice questions
Question 1
A change management approval is enabled, and the approval mode is two-level approval for all users.Which three of the following roles will have privileges to view, create, and manage network device and configuration management jobs? (Choose three.)
- A. Administrator
- B. Engineer
- C. WebDownloader
- D. WebUploader
Show answer and explanation ▾
Correct answer: A, B, D
With two-level approval, the Administrator, Engineer and WebUploader roles can view, create and manage configuration management jobs. WebDownloader is the one role of the four that does not have these privileges.
Why the other options are wrong:
- C. WebDownloader is the one role listed that does not get privileges to create and manage these jobs.
Question 2
A company wants to add subnets to the IP address management within SolarWinds Observability Self-Hosted.Which two of the following ways can the company accomplish this task? (Choose two.)
- A. import subnets from JSON file
- B. import subnets from subnet report
- C. import subnets from spreadsheet
- D. use the subnet discovery wizard
Show answer and explanation ▾
Correct answer: C, D
IPAM can add subnets by importing them from a spreadsheet or by running the subnet discovery wizard.
Why the other options are wrong:
- A. Importing from a JSON file is not one of the two methods the question asks for.
- B. Importing from a subnet report is not one of the two methods the question asks for.
Question 3
Which two of the following protocols are used by network device configuration management through SolarWinds Observability Self-Hosted?
(Choose two.)
- A. API
- B. SSH
- C. SNMP
- D. WMI
Show answer and explanation ▾
Correct answer: B, C
Network configuration management works with devices that support SSH or Telnet and have a command line. SNMP is also used: it can request config transfers on supported Cisco devices, and it retrieves the System OID used to pick the device template.
Why the other options are wrong:
- A. An API is not one of the protocols listed for requesting or transferring device configurations.
- D. WMI is a Windows management interface and is not used to manage network device configurations.
Question 4
What contains specific commands that enable SolarWinds Observability Self-Hosted to perform actions on the associated target node type?
- A. CLI credentials
- B. connection profile
- C. device templates
- D. firmware repository
Show answer and explanation ▾
Correct answer: C
A device template holds the commands used for a given type of device, so the platform knows how to run actions on it.
Why the other options are wrong:
- A. CLI credentials only supply the login details.
- B. A connection profile sets how to connect, not the commands to run.
- D. The firmware repository stores firmware images.
Question 5
For which purpose does IP address management use neighbor scanning?
- A. analyze IP address conflicts
- B. analyze IP address subnets
- C. analyze the status of transient IP addresses
- D. determine IP address status from ARP tables
Show answer and explanation ▾
Correct answer: D
Neighbor scanning reads the ARP tables of network devices to see which IP addresses are in use.
Why the other options are wrong:
- A. Neighbor scanning is used to find address status, not to analyze conflicts.
- B. Neighbor scanning looks at individual addresses, not at subnets.
- C. Neighbor scanning does not target transient addresses; it reads ARP data for address status.
Question 6
Which three of the following parameters can be used to add a device to the user and device tracking watch list? (Choose three.)
- A. hardware profile
- B. hostname
- C. MAC address
- D. username
Show answer and explanation ▾
Correct answer: B, C, D
When adding an item to the watch list, the administrator picks the object type and enters its value: a MAC address, IP address or hostname to watch a device, or a username to watch a user.
Why the other options are wrong:
- A. A hardware profile is not one of the object types accepted when adding an entry to the watch list.
Question 7
Within SolarWinds Observability Self-Hosted network device configuration, which three of the following options are used when defining login information? (Choose three.)
- A. device-level credentials
- B. global connection profile
- C. SNMP credentials
- D. user-level credentials
Show answer and explanation ▾
Correct answer: A, B, D
Login information for configuration management can be defined in three ways: device-level credentials on an individual node, a global connection profile reused across many nodes, or user-level credentials tied to a specific platform user account.
Why the other options are wrong:
- C. SNMP credentials are used for polling and are not one of the three ways to define device login information.
Question 8
Which vendor supports network service assurance monitoring within SolarWinds Observability Self-Hosted?
- A. Cisco
- B. Huawei
- C. Microsoft
- D. Palo Alto
Show answer and explanation ▾
Correct answer: A
Network Service Assurance generates and analyzes test traffic between Cisco IOS devices, using Cisco IP SLA operations, and Juniper RPM devices. Cisco is the only listed vendor whose devices support these operations.
Why the other options are wrong:
- B. Huawei devices are not listed as supported for Network Service Assurance operations.
- C. Microsoft devices are not listed as supported for Network Service Assurance operations.
- D. Palo Alto devices are not listed as supported for Network Service Assurance operations.
Question 9
What is the designation for addresses that are dynamically assigned to devices that may power on or off regularly, or may enter and exit the network frequently?
- A. critical
- B. transient
- C. used
- D. warning
Show answer and explanation ▾
Correct answer: B
Transient is the status for addresses dynamically assigned to devices, such as devices that power on and off often, devices that join and leave the network frequently, or any device on a DHCP-enabled network. Transient addresses show a cyan icon.
Why the other options are wrong:
- A. Critical is not an IP address status in IP address management.
- C. Used marks an address that is currently assigned and not otherwise available, not one that comes and goes.
- D. Warning is not an IP address status in IP address management.
Question 10
An analyst is charged with monitoring VoIP and network quality within SolarWinds Observability Self-Hosted.Which diagnostic method would be utilized to generate and analyze traffic between Cisco IOS and Juniper RPM devices on a network?
- A. Ping Sweep Tool
- B. Service Assurance
- C. SNMPWalk
- D. TCP Connect
Show answer and explanation ▾
Correct answer: B
Service Assurance is the diagnostic method that sends test traffic between Cisco IOS and Juniper RPM devices and gives real-time and historical quality of service statistics over chosen network paths, which suits VoIP and network quality monitoring.
Why the other options are wrong:
- A. A ping sweep tool is not the method that generates and analyzes quality traffic between Cisco IOS and Juniper RPM devices.
- C. SNMPWalk is not the method that generates and analyzes quality traffic between these devices.
- D. TCP Connect is one operation type that tests connection times on a specific port, not the overall diagnostic method.
Question 11
Which role within network device configuration management allows a user to create, update, and assign baselines from the baseline management tab and promote a configuration to a baseline from the configuration management tab?
- A. WebDownloader
- B. WebReader
- C. WebUploader
- D. WebViewer
Show answer and explanation ▾
Correct answer: C
WebUploader is the minimum role needed to create, update and assign baselines on the Baseline Management tab and to promote a config to a baseline from the Config Management tab.
Why the other options are wrong:
- A. WebDownloader can read and download configurations but cannot create or assign baselines.
- B. WebReader is not one of the network configuration management roles.
- D. WebViewer can only view existing baselines and cannot create, assign or promote them.
Question 12
Which type of IP address conflict occurs when there is a difference in MAC addresses retrieved from two DHCP servers' lease information?
- A. dynamic and dynamic
- B. dynamic and static
- C. static and dynamic
- D. static and static
Show answer and explanation ▾
Correct answer: A
A dynamic and dynamic conflict is reported when the MAC addresses in the lease information of two DHCP servers differ for the same IP address, because both entries come from DHCP.
Why the other options are wrong:
- B. A dynamic and static pairing is not the type reported when the leases of two DHCP servers disagree.
- C. A static and dynamic conflict compares a static entry, such as SNMP data or an IPAM reservation, with a DHCP lease, not two DHCP leases.
- D. A static and static conflict compares static entries such as SNMP, ARP table or reservation data, not DHCP leases.
Question 13
What is the minimum IP address role required for a user to initiate IP address scans within SolarWinds Observability Self-Hosted?
- A. administrator
- B. operator
- C. power user
- D. web user
Show answer and explanation ▾
Correct answer: C
Power User adds the ability to initiate scans on top of the Operator privileges, so it is the lowest role that can start IP address scans. Administrators can also scan, but they are a higher role.
Why the other options are wrong:
- A. Administrator can initiate scans but is not the minimum role that allows it.
- B. Operator privileges cover ranges, subnet status and address properties but do not include initiating scans.
- D. Web user is not one of the IP address management roles.
Question 14
How does SolarWinds Observability Self-Hosted assign device templates?
- A. uses CLI polling to retrieve System OID
- B. uses CLI polling to retrieve vendor information
- C. uses SNMP to retrieve System OID
- D. uses SNMP to retrieve vendor information
Show answer and explanation ▾
Correct answer: C
The device's System OID is retrieved through SNMP and matched to the template with the closest OID, starting with the full OID and shortening it until a match is found.
Why the other options are wrong:
- A. The System OID is not retrieved through CLI polling.
- B. Templates are not matched by vendor information gathered through CLI polling.
- D. Template matching uses the System OID, not general vendor information.
Question 15
SolarWinds Observability Self-Hosted retrieves vulnerability data from the National Institute of Standards and Technology (NIST) and stores it in a ZIP file on solarwinds.com using which format?
- A. API
- B. json
- C. txt
- D. xml
Show answer and explanation ▾
Correct answer: B
Each night the latest NIST firmware vulnerability data is stored on solarwinds.com in the cve-all.json.zip and cpematch.json.zip files, so the data is kept in JSON format inside ZIP files.
Why the other options are wrong:
- A. API is an interface, not the file format of the stored vulnerability data.
- C. The vulnerability data is not stored as plain text files.
- D. The vulnerability data files are JSON, not XML.
Question 16
In a network device configuration and management policy report, which piece defines a condition that must or must not exist?
- A. policy
- B. report
- C. rule
- D. writer
Show answer and explanation ▾
Correct answer: C
Compliance uses three tiers: a rule is the most granular part and defines a condition that must or must not exist in a configuration, a policy groups related rules, and a policy report runs one or more policies.
Why the other options are wrong:
- A. A policy is a grouping of related rules, not the single condition itself.
- B. A report runs policies against configurations and does not define individual conditions.
- D. A writer is not one of the rule, policy and policy report components and does not define conditions.
Question 17
Which two of the following types of network device configuration types are monitored by default? (Choose two.)
- A. baseline
- B. device
- C. running
- D. startup
Show answer and explanation ▾
Correct answer: C, D
Startup and Running are standard config types, and the Nightly Config Backup job, which is enabled by default, downloads the Running and Startup configs from all nodes every night.
Why the other options are wrong:
- A. A baseline is an approved reference configuration used for comparison, not a config type downloaded from devices.
- B. Device is not a config type that is backed up and monitored by default; the nightly job covers Running and Startup.
Question 18
To effectively monitor the quality of service for VoIP calls within SolarWinds Observability Self-Hosted, which three of the following metrics need to be measured? (Choose three.)
- A. jitter
- B. latency
- C. packet loss
- D. path echo
Show answer and explanation ▾
Correct answer: A, B, C
Quality of service for VoIP is measured with jitter, latency and packet loss, along with the mean opinion score calculated from them, which Network Service Assurance operations report.
Why the other options are wrong:
- D. Path echo is a type of test operation that measures hop-by-hop round-trip time, not a VoIP quality metric.
Question 19
What is the default polling interval for MAC notification processing interval to the frequency that allows user and device tracking to check for new trap messages?
- A. 60 seconds
- B. 120 seconds
- C. 60 minutes
- D. 120 minutes
Show answer and explanation ▾
Correct answer: B
The MAC-Notification Processing Interval sets how often user and device tracking checks for new MAC notification trap messages, and its default value is 120 seconds.
Why the other options are wrong:
- A. 60 seconds is not the default MAC notification processing interval.
- C. 60 minutes is not the default MAC notification processing interval.
- D. 120 minutes is not the default; the default is measured in seconds.
Question 20
An analyst has options for how to work with the IP request process.Which setting means only users with SolarWinds Platform accounts, and are logged into the account, can access the IP address request form?
- A. enabled for all the users
- B. enabled for some users
- C. restricted
- D. users only
Show answer and explanation ▾
Correct answer: C
With the Restricted setting, only users who have accounts and are logged in can open the IP Address Request form, through My Dashboards, IP Addresses, Request IP Address.
Why the other options are wrong:
- A. Enabled for anyone lets anyone who has the URL open the form, so it does not limit access to logged-in account holders.
- B. Enabled for some users is not one of the IP request access settings.
- D. Users only is not one of the IP request access settings.
Question 21
How can a network be organized within SolarWinds Observability Self-Hosted IP address manager?
- A. create groups using drag-and-drop interface on manage subnets page
- B. export subnet information to a spreadsheet
- C. manually import subnet details into database
- D. utilize automatic IP discovery to group IP addresses based on usage
Show answer and explanation ▾
Correct answer: A
Groups organize the network in IP address management. The drag-and-drop interface on the Manage Subnets and IP Addresses page lets you build groups that hold other groups, supernets and subnets.
Why the other options are wrong:
- B. Exporting subnet information to a spreadsheet does not organize the network inside IP address management.
- C. Manually importing subnet details into the database is not how the network is organized.
- D. Automatic discovery adds addresses but is not the documented way to organize the network into groups.
That was 21 of 74.
The full SolarWinds Observability Self-Hosted Network Management pack has all 74 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 21 free as one PDF by email. Get the Half Pack →
About this exam
These 21 SolarWinds Observability Self-Hosted Network Management questions are free here, and as a free PDF by email.
They are drawn from the same bank as the full Observability Self-Hosted Network Management pack, which has 74 questions in total.