RUCKUS RCNI Practice Questions with Explanations
Free RUCKUS RCNI practice questions. 22 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
RCNI practice questions
Question 1
ICX reserves some VLAN IDs for system functions.
How many VLAN IDs are reserved?
- A. 9
- B. 7
- C. 3
- D. 5
Show answer and explanation ▾
Correct answer: D
FastIron reserves VLAN IDs 4087, 4090, 4091, 4092 and 4093 for internal use, five in all, so those IDs cannot be used for customer VLANs.
Why the other options are wrong:
- A. Nine is more than the number ICX reserves.
- B. Seven is more than the number ICX reserves.
- C. Three is fewer than the number ICX reserves.
Question 2
A Wi-Fi access point is configured for management traffic on the default VLAN and a guest SSID on VLAN 10. The access point is connected to port 1/1/10.
What is the correct configuration?
- A. vlan 1 no tagged ethernet 1/1/10 ! vlan 10 untagged ethernet 1/1/10
- B. vlan 1 no untagged ethernet 1/1/10 ! vlan 10 tagged ethernet 1/1/10
- C. vlan 10 tagged ethernet 1/1/10
- D. vlan 10 no untagged ethernet 1/1/10
Show answer and explanation ▾
Correct answer: C
The port stays untagged in the default VLAN for management and is added to VLAN 10 as a tagged member, so the access point can carry guest traffic with a VLAN tag.
Why the other options are wrong:
- A. This removes tagging from VLAN 1 and makes VLAN 10 untagged, which reverses the intended roles.
- B. This removes the port from untagged membership in VLAN 1, so management traffic on the default VLAN is lost.
- D. This removes an untagged membership that does not exist in VLAN 10 and never adds the tagged one.
Question 3
Which configuration steps will add untagged ethernet ports 1/1/1 and 1/1/2 and tagged ethernet port 1/2/1 to VLAN 10?
- A. untagged ethernet 1/1/1 to 1/1/2 vlan 10 tagged ethernet 1/2/1 vlan 10
- B. untagged ethernet 1/1/1 to 1/1/2 tagged ethernet 1/2/1 vlan 10
- C. vlan 10 no tagged ethernet 1/1/1 to 1/1/2 tagged ethernet 1/2/1
- D. vlan 10 untagged ethernet 1/1/1 to 1/1/2 tagged ethernet 1/2/1
Show answer and explanation ▾
Correct answer: D
On an ICX you enter the VLAN context first with vlan 10, then add the untagged range and the tagged port beneath it.
Why the other options are wrong:
- A. The port commands are given before entering the VLAN, so they are not applied to VLAN 10.
- B. The VLAN is named after the port commands, so the ports are not placed in VLAN 10.
- C. This uses no tagged for the first range, which removes ports rather than adding them as untagged.
Question 4
Which device will become the root in the Spanning Tree election process?
- A. the device with root guard enabled
- B. the device with the highest IP address
- C. the device with the lowest bridge ID
- D. the device with the highest bridge priority value
Show answer and explanation ▾
Correct answer: C
Spanning tree elects the switch with the lowest bridge ID, which is the priority value followed by the MAC address.
Why the other options are wrong:
- A. Root guard protects an existing root and does not make a device the root.
- B. IP addresses play no part in the election.
- D. A higher priority value ranks worse, so the highest value is the least likely root.
Question 5
The root bridge is connected to another switch over two independent 10Gbe links.
Which link will remain in a forwarding state on both sides?
- A. the link with the lowest port number on the non-root switch
- B. the link with the lowest port number on the root switch
- C. the link with the highest port number on the root switch
- D. the link with the highest port number on the non-root switch
Show answer and explanation ▾
Correct answer: B
With equal costs, the tie is broken by the sending bridge's port ID, so the link with the lowest port number on the root switch stays forwarding and the other is blocked.
Why the other options are wrong:
- A. The tie is broken using the port numbers on the root switch, not on the non-root switch.
- C. A higher port number loses the tie, so that link is blocked.
- D. The non-root switch port numbers do not decide which link forwards.
Question 6
Which two commands display Power over Ethernet (PoE) power budget? (Choose two.)
- A. show configuration
- B. show inline power
- C. show version
- D. show chassis
- E. show inline power detail
Show answer and explanation ▾
Correct answer: B, E
The show inline power command lists PoE status per port together with the power capacity and allocation of the switch, and show inline power detail adds the full power supply and budget breakdown.
Why the other options are wrong:
- A. show configuration lists the saved configuration, not the PoE power budget.
- C. show version reports software and hardware details, not the PoE power budget.
- D. show chassis reports power supply, fan and temperature status, not the PoE power budget.
Question 7
As an IP packet is routed across subnets, which value gets updated at each hop?
- A. destination MAC address
- B. destination IP address
- C. source IP address
- D. subnet mask
Show answer and explanation ▾
Correct answer: A
Each router strips the incoming Layer 2 frame and builds a new one for the next hop, so the destination MAC address changes at every hop while the IP addresses stay the same end to end.
Why the other options are wrong:
- B. The destination IP address stays the same from source to destination.
- C. The source IP address stays the same from source to destination.
- D. A subnet mask is not carried in the IP packet.
Question 8
What is the highest Power over Ethernet (PoE) power class supported by 802.3bt?
- A. 8
- B. 4
- C. 1
- D. 16
Show answer and explanation ▾
Correct answer: A
IEEE 802.3bt extends PoE to power classes 5 through 8, with class 8 the highest at up to 90 W supplied by the switch port.
Why the other options are wrong:
- B. Class 4 is the highest class of the earlier 802.3at standard.
- C. Class 1 is a low-power class.
- D. There is no PoE class 16.
Question 9
Which function is performed by ARP protocol?
- A. resolve IP address to MAC address
- B. discover directly connected neighbors
- C. build and maintain switch MAC tables
- D. resolve host name
Show answer and explanation ▾
Correct answer: A
ARP maps a known IPv4 address to the MAC address of the device that owns it, so a host can build the Ethernet frame needed to reach a neighbor or its gateway on the local network.
Why the other options are wrong:
- B. Neighbor discovery is done by protocols such as LLDP, not ARP.
- C. Switch MAC tables are built by learning source addresses from received frames.
- D. Host names are resolved by DNS.
Question 10
What are two features of Open Shortest Path First (OSPF)? (Choose two.)
- A. utilizes distance vector
- B. calculates link cost
- C. automatic redistribution of routes
- D. updates routes dynamically
- E. uses exterior gateway protocols
Show answer and explanation ▾
Correct answer: B, D
OSPF is a link-state interior gateway protocol. It assigns a cost to each link and runs the shortest path first calculation on those costs, and it updates routes dynamically when the topology changes.
Why the other options are wrong:
- A. OSPF is a link-state protocol, not a distance vector protocol.
- C. Redistribution into OSPF must be configured; it is not automatic.
- E. OSPF is an interior gateway protocol.
Question 11
Which command must be configured at the interface level to honor Differentiated Services Code Point (DSCP)-based Class of Service (CoS) on a ICX7750?
- A. qos profile
- B. ip dscp-remark 1
- C. qos-tos map dscp-priority
- D. trust dscp
Show answer and explanation ▾
Correct answer: D
The trust dscp command on an interface tells the ICX switch to honor the DSCP value of incoming packets when it assigns their internal priority and queue.
Why the other options are wrong:
- A. qos profile is not the interface command that makes a port trust incoming DSCP values.
- B. ip dscp-remark rewrites the DSCP value instead of honoring it.
- C. qos-tos map dscp-priority changes the DSCP to priority mapping and does not make an interface trust DSCP.
Question 12
What are two differences between Class of Service (CoS) and Differentiated Services Code Point (DSCP)? (Choose two.)
- A. DSCP defines priority levels and CoS manipulates traffic according to these defined priority levels.
- B. CoS defines priority levels and DSCP manipulates traffic according to these defined priority levels.
- C. DSCP operates at Layer 2 in OSI model, whereas CoS operates in Layer 3.
- D. CoS operates at Layer 2 in OSI model, whereas DSCP operates in Layer 3.
- E. DSCP is simpler and can scale easily as the network grows. CoS becomes more complex as network demand for prioritized data increase.
Show answer and explanation ▾
Correct answer: B, D
CoS is the 3-bit priority field in the 802.1Q tag of an Ethernet frame, so it works at Layer 2 and defines the priority levels. DSCP is carried in the IP header at Layer 3 and is used to treat traffic according to those priority levels.
Why the other options are wrong:
- A. CoS is the marking that defines the priority levels, so this statement has the roles reversed.
- C. DSCP is in the IP header at Layer 3 and CoS is in the Ethernet tag at Layer 2, so this statement has the layers reversed.
- E. Relative simplicity and scaling is not a stated difference between the two markings.
Question 13
Which two ICX switch models are recommended for collapsed aggregation and core network designs? (Choose two.)
- A. ICX7850
- B. ICX7750
- C. ICX7550
- D. ICX7450
- E. ICX7250
Show answer and explanation ▾
Correct answer: A, B
The ICX 7850 and ICX 7750 are the high-performance aggregation and core platforms in the ICX family, with dense high-speed fiber ports, so they are the models recommended for a collapsed aggregation and core design.
Why the other options are wrong:
- C. The ICX 7550 is positioned below the two core and aggregation platforms.
- D. The ICX 7450 is an access switch.
- E. The ICX 7250 is an access switch.
Question 14
Which ICX model can run silently in fanless mode?
- A. ICX7150-48PF
- B. ICX7150-48P
- C. ICX7550-24P
- D. ICX7150-48ZP
Show answer and explanation ▾
Correct answer: B
The ICX 7150-48P can be set to a fanless mode that turns its fans off for silent operation, with a reduced PoE budget while the mode is active.
Why the other options are wrong:
- A. Fanless mode is not supported on the ICX 7150-48PF.
- C. The ICX 7550-24P does not run in fanless mode.
- D. Fanless mode is not supported on the ICX 7150-48ZP.
Question 15
A customer required an access switch with a Power over Ethernet (PoE) budget not to exceed 240W. They also require the switch to make no fan noise.
Which ICX switch would fit these requirements?
- A. ICX7150-C12P
- B. ICX7150-24P
- C. ICX7150-48P
- D. ICX7150-C10ZP
Show answer and explanation ▾
Correct answer: D
The ICX 7150-C10ZP is a compact switch with no fans and a PoE budget of 240 W, so it meets both the silence requirement and the power limit.
Why the other options are wrong:
- A. The ICX 7150-C12P is not the compact model with the 240 W PoE budget.
- B. The ICX 7150-24P has cooling fans and a larger PoE budget in normal operation.
- C. The ICX 7150-48P has cooling fans and a larger PoE budget in normal operation.
Question 16
If a customer needs to implement VRRP-E on their ICX7550 units, which license needs to be applied to enable this feature?
- A. PoD
- B. MACSec
- C. L3-Base
- D. L3-prem
Show answer and explanation ▾
Correct answer: D
VRRP-E belongs to the premium Layer 3 feature set on the ICX 7550, so the L3 premium license must be applied before it can be enabled.
Why the other options are wrong:
- A. A PoD license unlocks port capacity, not Layer 3 features.
- B. A MACsec license enables link encryption, not VRRP-E.
- C. L3-Base is not the license that unlocks VRRP-E on this model.
Question 17
Which ICX model has eight integrated QSFP28 ports?
- A. ICX7550-48F
- B. ICX7850-48F
- C. ICX7650-48F
- D. ICX7750-48F
Show answer and explanation ▾
Correct answer: B
The ICX 7850-48F combines 48 SFP28 ports with eight integrated QSFP28 ports for 40 or 100 GbE uplinks and stacking.
Why the other options are wrong:
- A. The ICX 7550-48F does not have eight integrated QSFP28 ports.
- C. The ICX 7650-48F does not have eight integrated QSFP28 ports.
- D. The ICX 7750-48F uses QSFP+ 40 GbE ports, not QSFP28.
Question 18
Which three factors must be considered when ordering a replacement power supply for an ICX7650? (Choose three.)
- A. 110 vs 220 volt
- B. DC vs AC power
- C. airflow direction
- D. active vs passive cooling
- E. hotswap vs non-hotswap
- F. PoE vs non-PoE
Show answer and explanation ▾
Correct answer: A, B, F
A replacement supply has to match the power feed and the switch model: AC or DC input, the line voltage it will run on, and whether the switch is a PoE model, because PoE models take the higher-wattage supplies.
Why the other options are wrong:
- C. Airflow direction is not one of the three ordering factors for this replacement.
- D. Active versus passive cooling is not an ordering choice for these power supplies.
- E. The supplies are hot-swappable, so this is not an ordering choice.
Question 19
Which switch cannot exceed a maximum of 30W per port?
- A. ICX7650
- B. ICX7550
- C. ICX7150-48ZP
- D. ICX7150-C12P
Show answer and explanation ▾
Correct answer: D
The ICX 7150-C12P provides 802.3at PoE+ on its twelve access ports, and PoE+ supplies a maximum of 30 W per port.
Why the other options are wrong:
- A. The ICX 7650 family supports up to 90 W per port.
- B. The ICX 7550 family supports up to 90 W per port.
- C. The ICX 7150-48ZP has four-pair power ports that deliver up to 90 W.
Question 20
Which switch model provides the most 100Gb ports?
- A. ICX7850-48F
- B. ICX7850-32Q
- C. ICX7750-32Q
- D. ICX7850-48FS
Show answer and explanation ▾
Correct answer: B
The ICX 7850-32Q has 32 QSFP28 ports that each run at 40 or 100 GbE, the highest 100 GbE port count of the models listed.
Why the other options are wrong:
- A. The ICX 7850-48F has eight 100 GbE capable ports.
- C. The ICX 7750-32Q has 40 GbE QSFP+ ports and no 100 GbE ports.
- D. The ICX 7850-48FS has eight 100 GbE capable ports.
Question 21
What is the maximum distance between ICX devices in a stack?
- A. 40 kilometers
- B. 3 meters
- C. 9 meters
- D. 1 kilometer
Show answer and explanation ▾
Correct answer: A
ICX long-distance stacking uses standard fiber optics on the stacking ports, which lets stack members sit up to 40 kilometers apart, for example in different buildings or sites.
Why the other options are wrong:
- B. 3 meters is a short copper cable length, not the maximum stacking distance.
- C. 9 meters is not the maximum stacking distance.
- D. 1 kilometer is not the maximum stacking distance.
Question 22
Which method is required to install a feature license on an ICX running FastIron 08.0.95?
- A. USB
- B. CLI
- C. TFTP
- D. FTP
Show answer and explanation ▾
Correct answer: B
On FastIron 08.0.95 a feature license is installed by entering the license command at the CLI of the switch.
Why the other options are wrong:
- A. USB is not the method used to install a feature license on this release.
- C. TFTP is a file transfer method, not how the license is installed on this release.
- D. FTP is a file transfer method, not how the license is installed on this release.
That was 22 of 59.
The full RUCKUS RCNI pack has all 59 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 22 free as one PDF by email. Get the Half Pack →
About the RCNI exam
These 22 RUCKUS RCNI questions are free here, and as a free PDF by email.
They are drawn from the same bank as the full RCNI pack, which has 59 questions in total.