Nokia 4A0-D01 Practice Questions with Explanations

Free Nokia 4A0-D01 practice questions. 12 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.

4A0-D01 practice questions

Question 1

Which of the following is NOT one of the reasons why BGP is used as the routing protocol in the data center?

  • A. It is more efficient than link-state protocols like IS-IS and OSPF.
  • B. BGP neighbors automatically discover each other.
  • C. It is a well understood and mature routing protocol.
  • D. It supports both IPv4 and IPv6.
Show answer and explanation ▾

Correct answer: A

BGP is chosen for data center fabrics because it is mature, widely understood, scales well and carries both IPv4 and IPv6. Being more efficient than link-state protocols such as IS-IS and OSPF is not one of the reasons.

Why the other options are wrong:

  • B. Fabric nodes can set up BGP sessions dynamically with discovered neighbors, which is among the reasons BGP is used.
  • C. BGP is a mature protocol that operators know well, which is a reason it is used.
  • D. BGP carries both IPv4 and IPv6 routes, which is a reason it is used.

Question 2

Which of the following statements about the data center’s leaf-spine topology (clos network) is FALSE?

  • A. Each leaf router is connected to all the spine routers in the cluster.
  • B. It provides a consistent path for east-west traffic.
  • C. It uses the spanning tree protocol to avoid forwarding loops.
  • D. It uses ECMP to distribute traffic across duplicate links.
Show answer and explanation ▾

Correct answer: C

A leaf-spine fabric avoids loops with routing and ECMP over many equal paths, not with the spanning tree protocol, so that statement is false.

Why the other options are wrong:

  • A. True: every leaf router connects to all of the spine routers.
  • B. True: any east-west path crosses one leaf-spine-leaf route, so it is consistent.
  • D. True: ECMP spreads traffic over the equal links.

Question 3

Which of the following is NOT a function of Nokia’s SR Linux application manager?

  • A. It monitors the health of all applications.
  • B. It manages the SR Linux and customer-defined applications.
  • C. It reads the application’s configuration information and starts each application.
  • D. It translates the application’s YANG model into protobufs for the IDB.
Show answer and explanation ▾

Correct answer: D

The application manager monitors and starts applications. Translating the YANG model into protobufs for the IDB is not one of its functions.

Why the other options are wrong:

  • A. It is a function: the application manager monitors application health.
  • B. It is a function: it manages SR Linux and customer-defined applications.
  • C. It is a function: it reads configuration and starts each application.

Question 4

Which of the following statements about the YANG model used in Nokia’s SR Linux is FALSE?

  • A. All configuration and state information is defined as a YANG model.
  • B. The YANG model uses a tree structure with “leafs” as the branches and “containers” as the data components.
  • C. The YANG model can be converted into other formats such as JSON or XML.
  • D. The YANG model provides a standardized way for applications to retrieve SR Linux configuration and state information.
Show answer and explanation ▾

Correct answer: B

In a YANG model, leafs hold the data values and containers group them in the tree, so describing leafs as the branches and containers as the data components is the false statement.

Why the other options are wrong:

  • A. True: SR Linux defines all configuration and state as a YANG model.
  • C. True: a YANG model can be converted to formats such as JSON or XML.
  • D. True: YANG gives applications a standard way to read configuration and state.

Question 5

Which of the following is NOT one of the characteristics of Nokia’s SR Linux?

  • A. It uses an unmodified Linux kernel that simplifies the use of third party applications.
  • B. It uses a modular, state-driven architecture that gives applications efficient access to system information.
  • C. It includes a NetOps development kit that supports the integration of third-party applications.
  • D. It uses mature and stable SNMP protocol to access the command line interface.
Show answer and explanation ▾

Correct answer: D

SR Linux gives access to the CLI and state through modern interfaces built on its YANG models, not through SNMP, so this is not one of its characteristics.

Why the other options are wrong:

  • A. It is a characteristic: SR Linux runs on an unmodified Linux kernel.
  • B. It is a characteristic: the architecture is modular and state-driven.
  • C. It is a characteristic: the NetOps development kit supports third-party apps.

Question 6

Which of the following statements about Nokia’s Fabric Services System is FALSE?

  • A. Data center fabric configuration is represented as the fabric intent in a declarative YAML format.
  • B. Digital sandbox provides notification of performance issues in the data center fabric.
  • C. Telemetry data is provided in a context that is relevant to the fabric intent.
  • D. Cloud-native design enables easy integration with the customer’s environment.
Show answer and explanation ▾

Correct answer: B

The digital sandbox is a virtual copy of the fabric used to try out and validate a design or change before it is deployed. It does not report performance issues in the live fabric, so this statement is the false one.

Why the other options are wrong:

  • A. The fabric intent is a declarative description of the fabric, so this statement is true.
  • C. Telemetry is presented in the context of the fabric intent, so this statement is true.
  • D. The system has a cloud-native design that eases integration, so this statement is true.

Question 7

Which of the following statements about configuration checkpoints in Nokia SR Linux is FALSE?

  • A. Checkpoint 0 is always the oldest checkpoint.
  • B. The current running configuration can be saved as a JSON-formatted checkpoint file.
  • C. The operator can revert to any existing checkpoint.
  • D. The operator can generate a new checkpoint when committing configuration changes.
Show answer and explanation ▾

Correct answer: A

SR Linux numbers checkpoints so that checkpoint 0 is the most recent one, and older checkpoints get higher numbers. Saying checkpoint 0 is always the oldest is therefore false.

Why the other options are wrong:

  • B. The running configuration can be saved as a JSON checkpoint file, so this statement is true.
  • C. The operator can load and revert to any checkpoint that still exists, so this statement is true.
  • D. A checkpoint can be created as part of a commit, so this statement is true.

Question 8

Which of the following statements about the CLI modes in Nokia’s SR Linux is FALSE?

  • A. The state mode displays the current configuration and operational information.
  • B. The show mode uses pre-defined reports to display operational information.
  • C. The running mode is used to make configuration changes.
  • D. Users can switch from one mode to another using the enter command.
Show answer and explanation ▾

Correct answer: C

Running mode only displays the active configuration, and configurations cannot be edited in it. Changes are made in candidate mode and applied with a commit, so the statement about running mode is the false one.

Why the other options are wrong:

  • A. State mode displays the configuration together with operational state, so this statement is true.
  • B. Show mode displays configured features and operational state through show reports, so this statement is true.
  • D. Modes are switched with the enter command, for example enter candidate, so this statement is true.

Question 9

Which of the following statements about SR Linux interfaces is FALSE?

  • A. Only one management interface is allowed.
  • B. Network interfaces are associated with physical ports on the linecards.
  • C. The loopback interface is a physical interface directly connected to another interface on the same chassis.
  • D. Layer 2 parameters such as MTU are configured at the SR Linux interface level while Layer 3 parameters are configured at the subinterface level.
Show answer and explanation ▾

Correct answer: C

A loopback interface is a virtual interface with no physical port behind it and it is not cabled to anything. Describing it as a physical interface connected to another interface on the chassis is false.

Why the other options are wrong:

  • A. SR Linux has a single management interface, so this statement is true.
  • B. Network interfaces map to the physical ports on the linecards, so this statement is true.
  • D. Layer 2 settings such as MTU sit at the interface level and Layer 3 settings at the subinterface level, so this statement is true.

Question 10

Which of the following statements about the IRB subinterface configuration in Nokia SR Linux is FALSE?

  • A. An IP address is configured under the IRB’s subinterface.
  • B. An IRB subinterface is configured in an IP-VRF network instance.
  • C. One IRB subinterface is configured for each interface within a MAC-VRF network instance.
  • D. One IRB subinterface is configured in a MAC-VRF network instance.
Show answer and explanation ▾

Correct answer: C

A MAC-VRF uses a single IRB subinterface as its Layer 3 gateway, no matter how many bridged interfaces it contains. One IRB subinterface per interface in the MAC-VRF is not how IRB is configured, so this statement is false.

Why the other options are wrong:

  • A. The gateway IP address is configured under the IRB subinterface, so this statement is true.
  • B. The IRB subinterface is also attached to an IP-VRF to provide routing, so this statement is true.
  • D. One IRB subinterface is attached to a MAC-VRF, so this statement is true.

Question 11

Which of the following statements about IP-VRFs in Nokia’s SR Linux is FALSE?

  • A. An IP-VRF is a Layer 3 network instance.
  • B. Packets in an IP-VRF are forwarded based on the destination IP address.
  • C. The router maintains a distinct route table for each IP-VRF instance.
  • D. Multiple servers can be connected to the same subnet in an IP-VRF.
Show answer and explanation ▾

Correct answer: D

An IP-VRF routes between subnets, and each of its routed subinterfaces is a separate subnet. Putting several servers in the same subnet needs a Layer 2 MAC-VRF, so this statement is the false one.

Why the other options are wrong:

  • A. An IP-VRF is a Layer 3 network instance, so this statement is true.
  • B. An IP-VRF forwards packets by destination IP address, so this statement is true.
  • C. Each IP-VRF has its own separate route table, so this statement is true.

Question 12

Which of the following statements about a MAC-VRF is FALSE?

  • A. A MAC-VRF is a Layer 2 network instance.
  • B. Bridge table entries contain an exit interface for each destination address.
  • C. Packets received in a MAC-VRF are forwarded based on destination IP address.
  • D. Multiple devices can be connected to the same IP subnet using a MAC-VRF.
Show answer and explanation ▾

Correct answer: C

A MAC-VRF is a Layer 2 network instance that forwards frames by destination MAC address using its bridge table. Forwarding by destination IP address is what an IP-VRF does, so this statement is false.

Why the other options are wrong:

  • A. A MAC-VRF is a Layer 2 network instance, so this statement is true.
  • B. Each bridge table entry maps a destination MAC address to an exit interface, so this statement is true.
  • D. A MAC-VRF is a broadcast domain, so several devices can share one IP subnet in it and this statement is true.

That was 12 of 61.

The full Nokia 4A0-D01 pack has all 61 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack

Not ready yet? Get the first 12 free as one PDF by email. Get the Half Pack →

About the 4A0-D01 exam

These 12 Nokia 4A0-D01 questions are free here, and as a free PDF by email.

They are drawn from the same bank as the full 4A0-D01 pack, which has 61 questions in total.

Back to blog