NetApp NS0-604 Practice Questions with Explanations

Free NetApp NS0-604 practice questions. 25 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.

NS0-604 practice questions

Question 1

A company has finished migrating all data to NetApp Cloud Volumes ONTAP. An application administrator needs to make sure that there are no interruptions in service for this new NFSv4 application.

Which feature must be registered on the Azure subscription to reduce unplanned failover times?

  • A. multipath HA
  • B. high availability
  • C. fault tolerance
  • D. redundancy
Show answer and explanation ▾

Correct answer: B

A high availability configuration of Cloud Volumes ONTAP keeps a second copy ready on another node, so failover for the NFSv4 application is short and unplanned interruptions are reduced.

Why the other options are wrong:

  • A. Multipath HA is a storage path feature and is not the setting that shortens failover.
  • C. Fault tolerance is a general design term and not the feature to register.
  • D. Redundancy is a general principle, not the feature registered on the subscription.

Question 2

Which network construct is required to enable nondisruptive failover between nodes in a Multi-AZ NetApp Cloud Volumes ONTAP cluster in AWS?

  • A. floating IPs
  • B. security groups
  • C. elastic network interfaces
  • D. Intercluster LIFs
Show answer and explanation ▾

Correct answer: C

Each Cloud Volumes ONTAP node in AWS connects to its subnets through elastic network interfaces. In a Multi-AZ pair, client traffic is routed to the network interface of the node that serves the data, and on failover it is redirected to the partner node's interface.

Why the other options are wrong:

  • A. Floating IP addresses are the addresses that get routed to a node's network interface, not the AWS network construct that the traffic is sent to.
  • B. Security groups filter traffic and do not move data access between nodes.
  • D. Intercluster LIFs carry replication traffic between clusters and play no part in failover inside the HA pair.

Question 3

What are two ways to optimize cloud data storage costs with NetApp Cloud Volumes ONTAP? (Choose two.)

  • A. aggregate deduplication
  • B. thin provisioning
  • C. TCO calculator
  • D. volume deduplication
Show answer and explanation ▾

Correct answer: B, D

Thin provisioning allocates space only as data is written, and volume-level deduplication removes duplicate blocks, so both lower the capacity paid for in the cloud.

Why the other options are wrong:

  • A. NetApp lists thin provisioning, deduplication, compression and cloning as the Cloud Volumes ONTAP cost savers, and deduplication works within a volume, so aggregate deduplication is not the answer here.
  • C. The TCO calculator estimates costs but does not itself optimize storage.

Question 4

A customer has an on-premises NetApp ONTAP based system with data from several workloads. The customer wants to create a backup of their on-premises data to Microsoft Azure Blob storage.

Which two of the customer’s on-premises data sources are supported with NetApp BlueXP backup and recovery? (Choose two.)

  • A. Microsoft SQL Server
  • B. NetApp ONTAP volume data
  • C. Microsoft Azure Stack
  • D. NetApp ONTAP S3 data
Show answer and explanation ▾

Correct answer: B, D

BlueXP backup and recovery protects on-premises ONTAP volume data and ONTAP S3 bucket data by copying them to object storage such as Azure Blob.

Why the other options are wrong:

  • A. Microsoft SQL Server is an application workload, not one of the two ONTAP data sources asked for here.
  • C. Microsoft Azure Stack is a Microsoft infrastructure platform, not an ONTAP data source for this service.

Question 5

A customer wants to lower their TCO using a cloud solution to reduce their expenditure for on-premises third party storage.

Which NetApp solution should the customer use?

  • A. BlueXP tiering
  • B. BlueXP backup and recovery
  • C. BlueXP copy and sync
  • D. BlueXP replication
Show answer and explanation ▾

Correct answer: A

BlueXP tiering moves inactive data from on-premises storage to low-cost cloud object storage, so less on-premises capacity has to be bought and maintained and the total cost of ownership drops.

Why the other options are wrong:

  • B. BlueXP backup and recovery creates protection copies and does not reduce the primary storage that is needed.
  • C. BlueXP copy and sync copies data between locations and does not shrink the on-premises footprint by itself.
  • D. BlueXP replication mirrors volumes between ONTAP systems for protection, which adds capacity rather than saving it.

Question 6

A customer is looking to implement NetApp StorageGRID in a high-availability (HA) environment.

Which benefit can the customer expect?

  • A. the use of virtual IP addresses (VIPs)
  • B. zero data loss in case of a catastrophic failure
  • C. the ability to focus on optimizing data retrieval speed
  • D. a single instance of the system for redundancy
Show answer and explanation ▾

Correct answer: A

StorageGRID high availability groups place one or more virtual IP addresses on a group of Admin or Gateway Nodes. If the active node fails, the virtual IP moves to a backup node, so clients keep using the same address.

Why the other options are wrong:

  • B. A high availability group keeps client connections available; it does not promise zero data loss in a catastrophe.
  • C. Retrieval speed tuning is not what a high availability group provides.
  • D. A single instance is the opposite of redundancy.

Question 7

A company wants to save on AWS infrastructure costs for NetApp Cloud Volumes ONTAP. They want to tier to Amazon Simple Storage Service (Amazon S3).

What is the best way for the company to create a connection to S3 without incurring egress charges?

  • A. peering
  • B. gateway endpoint
  • C. AWS PrivateLink
  • D. network address translation (NAT) device
Show answer and explanation ▾

Correct answer: B

A VPC gateway endpoint for Amazon S3 gives Cloud Volumes ONTAP a private route to S3 inside the AWS network. Gateway endpoints carry no extra charge, and tiering traffic does not leave through the Internet.

Why the other options are wrong:

  • A. Peering connects VPCs to each other, not a VPC to Amazon S3.
  • C. AWS PrivateLink interface endpoints are billed per hour and per gigabyte, so they are not the cost-free choice.
  • D. A NAT device sends the traffic out toward the Internet and adds data processing charges.

Question 8

A large life sciences customer wants to deploy Azure VMware Solution. They use Azure NetApp Files for high performance and closer access to their application within the EAST US region, instead of using the Azure VMware Solution reserved capacity.

Which two options does this customer need in their design topology? (Choose two.)

  • A. ensuring that the Azure VMware Solution and Azure NetApp Files volumes are in the Availability Zone
  • B. using a dark site and ensuring total security
  • C. choosing the Azure UltraPerformance Gateway and enabling Azure ExpressRoute FastPath.
  • D. using a single public IP address for all virtual machines
Show answer and explanation ▾

Correct answer: A, C

For the best performance, the Azure NetApp Files volumes are placed in the same Availability Zone as the Azure VMware Solution private cloud, and the connection uses an UltraPerformance ExpressRoute gateway with FastPath enabled so that datastore traffic bypasses the gateway.

Why the other options are wrong:

  • B. A dark site is not a requirement for attaching Azure NetApp Files datastores.
  • D. A single public IP address for all virtual machines has nothing to do with the datastore topology.

Question 9

A customer requires Azure NetApp Files volumes to be contained in a specially purposed subnet within your Azure Virtual Network (VNet). The volumes can be accessed directly from within Azure over VNet peering or from on-premises over a Virtual Network Gateway.

Which subnet can the customer use that is dedicated to Azure NetApp Files without being connected to the public Internet?

  • A. basic
  • B. default
  • C. dedicated
  • D. delegated
Show answer and explanation ▾

Correct answer: D

Azure NetApp Files volumes are created in a delegated subnet, a subnet in the VNet that is delegated to the Microsoft.NetApp/volumes service and reserved for it.

Why the other options are wrong:

  • A. Basic is not a subnet type used for Azure NetApp Files.
  • B. The default subnet is a general subnet and is not reserved for Azure NetApp Files.
  • C. Dedicated is not the Azure term; the subnet is delegated to the service.

Question 10

A company has a mandate to make sure that SVMs in the cloud leverage NetApp Volume Encryption as a storage administrator.

Which type of SVM should be used?

  • A. node
  • B. data
  • C. system
  • D. admin
Show answer and explanation ▾

Correct answer: B

Volumes that hold user data live in data SVMs, so NetApp Volume Encryption is applied to volumes in a data SVM, which is the SVM type a storage administrator creates to serve data.

Why the other options are wrong:

  • A. A node SVM represents an individual node and does not serve data volumes.
  • C. A system SVM is created automatically for cluster-level communication and does not hold user volumes.
  • D. The admin SVM manages the cluster and does not serve data.

Question 11

When considering security for Azure NetApp Files, what is a key security consideration to avoid a breach of confidentiality?

  • A. application of network security groups
  • B. Virtual Network Encryption
  • C. encryption using Kerberos with AES-256
  • D. double encryption at rest
Show answer and explanation ▾

Correct answer: D

Double encryption at rest protects stored Azure NetApp Files data with two separate layers of encryption, so the data stays unreadable even if one layer is compromised.

Why the other options are wrong:

  • A. Network security groups filter traffic and do not protect the stored data itself.
  • B. Virtual Network Encryption protects traffic between virtual machines, not the data stored in the volumes.
  • C. Kerberos with AES-256 protects protocol traffic in flight, not data at rest.

Question 12

A company experienced a recent security breach that encrypted data and deleted Snapshot copies.

Which two features will protect the company from this breach in the future? (Choose two.)

  • A. SnapLock
  • B. DataLock
  • C. Snapshot technology
  • D. multi-admin verification
Show answer and explanation ▾

Correct answer: A, D

SnapLock makes data and Snapshot copies write once, read many, so they cannot be changed or deleted before retention ends. Multi-admin verification requires a second administrator to approve sensitive commands such as deleting Snapshot copies.

Why the other options are wrong:

  • B. DataLock is not the ONTAP feature that addresses this breach on the storage system.
  • C. Ordinary Snapshot copies were deleted in this breach, so Snapshot technology alone does not prevent it.

Question 13

A customer wants to create a flexible solution to consolidate data in the cloud. They want to share files globally and cache a subset on distributed locations.

Which two components does the customer need? (Choose two.)

  • A. NetApp BlueXP edge caching Edge instances
  • B. Flash Cache intelligent caching
  • C. NetApp BlueXP copy and sync
  • D. NetApp Cloud Volumes ONTAP
Show answer and explanation ▾

Correct answer: A, D

The data is consolidated on Cloud Volumes ONTAP as the central file store, and BlueXP edge caching Edge instances in each location cache the active subset of files for local users.

Why the other options are wrong:

  • B. Flash Cache speeds up reads inside a storage controller and does not distribute files to remote sites.
  • C. BlueXP copy and sync copies data between locations and does not provide a global cached namespace.

Question 14

A company has an existing on-premises NetApp AFF array in their datacenter that is about to run out of storage capacity. Due to recent leadership changes, the company cannot add more storage capacity in the existing AFF array, because they need to move to cloud in 2 to 3 years. The current on-premises array contains a lot of cold data. The company needs to free some storage capacity on the existing on-premises AFF array relatively quickly, to support the new application.

Which NetApp BlueXP service should the company use to meet this requirement?

  • A. BlueXP tiering
  • B. BlueXP backup and recovery
  • C. BlueXP replication
  • D. BlueXP copy and sync
Show answer and explanation ▾

Correct answer: A

BlueXP tiering moves cold data blocks from the AFF aggregates to cloud object storage while the volumes stay online, which frees space on the array quickly without adding shelves.

Why the other options are wrong:

  • B. BlueXP backup and recovery makes copies and leaves the original data on the array.
  • C. BlueXP replication mirrors volumes to another system and does not free space on the source.
  • D. BlueXP copy and sync copies files to another target and does not free space on the source by itself.

Question 15

A company is migrating on-premises SMB data and ACLs to the Azure NetApp Files storage solution.

Which two Active Directory solutions are supported? (Choose two.)

  • A. Active Directory Domain Services (AD DS)
  • B. Azure Active Directory (Azure AD)
  • C. Azure Active Directory Domain Services (Azure AD DS)
  • D. Azure Identity and Access Management
Show answer and explanation ▾

Correct answer: A, C

Azure NetApp Files SMB volumes need a domain to join, and both Active Directory Domain Services and Azure Active Directory Domain Services are supported for that.

Why the other options are wrong:

  • B. Azure Active Directory alone is an identity service without the domain join and Kerberos services that SMB volumes need.
  • D. Azure Identity and Access Management controls access to Azure resources and is not a directory service for SMB.

Question 16

A company is configuring NetApp Cloud Volumes ONTAP in Azure. All outbound Internet access is blocked by default. The company wants to allow outbound Internet access for the following NetApp AutoSupport endpoints: https://support.netapp.com/aods/asupmessage https://support.netapp.com/asupprod/post/1.0/postAsup

Which type of traffic must be requested to allow access?

  • A. routing and firewall policy to allow HTTPS traffic
  • B. routing and firewall policy to allow NFS/SMB traffic
  • C. routing and firewall policy to allow SSH/RDP traffic
  • D. routing and firewall policy to allow DNS traffic
Show answer and explanation ▾

Correct answer: A

Both AutoSupport endpoints are https URLs, so the routing and firewall policies must allow outbound HTTPS traffic from Cloud Volumes ONTAP to those addresses.

Why the other options are wrong:

  • B. NFS and SMB carry file data and are not used to send AutoSupport messages.
  • C. SSH and RDP are remote administration protocols and do not deliver AutoSupport messages.
  • D. DNS only resolves names; it does not carry the AutoSupport messages.

Question 17

A customer has different on-premises workloads with a need for less than 2ms latency.

Which two service levels in NetApp Keystone storage as a service (STaaS) does the customer need? (Choose two.)

  • A. Extreme
  • B. Standard
  • C. Premium
  • D. Performance
Show answer and explanation ▾

Correct answer: A, C

Extreme and Premium are the Keystone service levels with the lowest latency targets, so they are the two that fit workloads needing under 2 ms.

Why the other options are wrong:

  • B. Standard has a higher latency target and does not meet the requirement.
  • D. Performance has a higher latency target than Premium and does not meet the requirement.

Question 18

How should a customer monitor the operations that NetApp BlueXP performs?

  • A. NetApp Cloud Insights
  • B. NetApp Active IQ Unified Manager
  • C. Notification Center
  • D. NetApp BlueXP digital advisor
Show answer and explanation ▾

Correct answer: C

The Notification Center in BlueXP tracks the progress and result of the operations that BlueXP starts, so the customer can see whether each one succeeded or failed.

Why the other options are wrong:

  • A. Cloud Insights monitors infrastructure and workloads, not the operations BlueXP itself performs.
  • B. Active IQ Unified Manager monitors ONTAP cluster health and performance, not BlueXP operations.
  • D. Digital advisor gives wellness, risk and upgrade advice rather than tracking BlueXP operations.

Question 19

A customer is implementing NetApp StorageGRID with an Information Lifecycle Management (ILM) policy.

Which key benefit should the customer expect from using ILM policies in this solution?

  • A. improved data security
  • B. automated data optimization
  • C. real-time data analytics capabilities
  • D. simplified data access controls
Show answer and explanation ▾

Correct answer: B

ILM rules decide automatically where objects are stored, how many copies or what erasure coding is used, and for how long, so data is placed and moved over time without manual work.

Why the other options are wrong:

  • A. Security is handled by features such as encryption and access policies, not by ILM placement rules.
  • C. ILM manages object placement and retention and does not provide real-time analytics.
  • D. Access control is set through bucket and group policies, not ILM.

Question 20

A customer is setting up NetApp Cloud Volumes ONTAP for a general-purpose file share workload to ensure data availability.

Which action should the customer focus on primarily?

  • A. enabling compression
  • B. enabling encryption
  • C. implementing backup
  • D. tiering inactive data
Show answer and explanation ▾

Correct answer: C

Backup keeps an independent copy of the file share data that can be restored after deletion, corruption or loss of the system, so it is the action that protects data availability.

Why the other options are wrong:

  • A. Compression saves space and does not protect availability.
  • B. Encryption protects confidentiality and does not protect availability.
  • D. Tiering inactive data lowers cost and does not protect availability.

Question 21

A company wants a cost-effective storage solution to migrate their VMware environment from on-premises to Azure using Azure VMware Solution. Their current workload requires more storage than compute.

Which datastore storage solution should the company use?

  • A. Azure NetApp Files
  • B. Azure Files
  • C. Amazon FSx for NetApp ONTAP
  • D. Cloud Volumes ONTAP in Azure
Show answer and explanation ▾

Correct answer: A

Azure NetApp Files volumes can be attached to Azure VMware Solution as NFS datastores, so storage grows without adding more hosts. That suits a workload that needs more storage than compute.

Why the other options are wrong:

  • B. Azure Files is not a supported datastore for Azure VMware Solution.
  • C. Amazon FSx for NetApp ONTAP is an AWS service and does not serve Azure VMware Solution.
  • D. Cloud Volumes ONTAP in Azure is not attached as an Azure VMware Solution datastore.

Question 22

A customer wants to back up on premises data to Google by using NetApp BlueXP backup and recovery.

What is the first step that is required to implement the backup solution?

  • A. Create a Google Cloud bucket.
  • B. Enable NetApp Cloud Volumes Service.
  • C. Install NetApp BlueXP Connector.
  • D. Install an Acquisition Unit.
Show answer and explanation ▾

Correct answer: C

BlueXP backup and recovery is run by a BlueXP Connector, which discovers the on-premises ONTAP cluster and manages the backups to Google Cloud Storage, so the Connector has to be installed first.

Why the other options are wrong:

  • A. Creating a bucket is not the first step, because the service needs a Connector before it can work with Google Cloud Storage.
  • B. Cloud Volumes Service is a separate file service and is not needed for this backup.
  • D. An Acquisition Unit belongs to Cloud Insights data collection, not to backup and recovery.

Question 23

Which two widget types are available when creating dashboards in NetApp Cloud Insights? (Choose two.)

  • A. machine learning
  • B. VMware
  • C. note
  • D. single value
Show answer and explanation ▾

Correct answer: C, D

Cloud Insights dashboards are built from widgets such as line, area, bar and table charts, plus the single value widget for one headline number and the note widget for free text.

Why the other options are wrong:

  • A. Machine learning is not a widget type.
  • B. VMware is a data source, not a widget type.

Question 24

A customer has an AFF MetroCluster IP configuration and needs to tier cold data to the public cloud.

Which NetApp replication option must the customer use for the capacity tier?

  • A. FabricPool mirror
  • B. BlueXP copy and sync
  • C. BlueXP replication
  • D. SyncMirror
Show answer and explanation ▾

Correct answer: A

FabricPool mirror attaches two object stores to one aggregate and writes tiered data to both, so each MetroCluster site has a cloud tier it can read from after a site failure.

Why the other options are wrong:

  • B. BlueXP copy and sync copies files between targets and is not a FabricPool capacity tier option.
  • C. BlueXP replication mirrors volumes between ONTAP systems and does not protect the capacity tier.
  • D. SyncMirror mirrors the local disk plexes of an aggregate, not the cloud capacity tier.

Question 25

A company just underwent a merger. The new environment includes hundreds of branch office locations running Windows servers. The company needs technology to centralize unstructured data to consolidate branch office storage and infrastructure.

Which NetApp technology should the company use to meet these requirements?

  • A. BlueXP replication
  • B. Global File Cache
  • C. FlexCache
  • D. Cloud Volumes ONTAP
Show answer and explanation ▾

Correct answer: B

Global File Cache centralizes unstructured data in one cloud file store and places a software cache on Windows servers in each branch office, so local file servers and their storage can be retired.

Why the other options are wrong:

  • A. BlueXP replication mirrors volumes between ONTAP systems and does not consolidate branch file servers.
  • C. FlexCache caches ONTAP volumes on other ONTAP systems and is not built for Windows servers in branch offices.
  • D. Cloud Volumes ONTAP is the central storage, but alone it does not give branch offices a local cache.

That was 25 of 65.

The full NetApp NS0-604 pack has all 65 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack

Not ready yet? Get the first 25 free as one PDF by email. Get the Half Pack →

About the NS0-604 exam

These 25 NetApp NS0-604 questions are free here, and as a free PDF by email.

They are drawn from the same bank as the full NS0-604 pack, which has 65 questions in total.

Back to blog