Juniper Networks JN0-481 JNCIS-DC Practice Questions with Explanations

Free Juniper Networks JN0-481 JNCIS-DC practice questions. 16 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.

JN0-481 practice questions

Question 1

An operator is working on a capacity-panning exercise. The operator needs to examine the pre-built time series information regarding link utilization.

In the Juniper Apstra UI, which top-level tab would the operator have to access to find this information?

  • A. Active
  • B. Staged
  • C. Analytics
  • D. Dashboard
Show answer and explanation ▾

Correct answer: C

The Analytics tab of a blueprint holds the analytics dashboards, intent-based analytics probes and their stage data, including the predefined probes that record link utilization as a time series. That history is what a capacity planning exercise needs.

Why the other options are wrong:

  • A. The Active tab shows the running state of the deployed fabric, not the pre-built time series data from probes.
  • B. The Staged tab is where pending design and build changes are prepared before a commit.
  • D. The Dashboard tab gives an overall deployment status and anomaly summary, not the probe time series data.

Question 2

What are two types of policies that Juniper Apstra uses to push to switches using Security Policies? (Choose two.)

  • A. filter-based forwarding (ChooseFBF)
  • B. firewall filters
  • C. policy-based routing (ChoosePBR)
  • D. access control lists (ChooseACLs)
Show answer and explanation ▾

Correct answer: B, D

Apstra security policies are rules between groups of endpoints that Apstra renders on the switches as traffic filters: firewall filters on Junos devices and access control lists on other vendors' switches.

Why the other options are wrong:

  • A. Filter-based forwarding steers traffic to a different routing instance; it is not what Apstra security policies render.
  • C. Policy-based routing changes where traffic is forwarded, while Apstra security policies permit or deny traffic.

Question 3

You want to assign resources to your blueprint during the deployment phase.

In this scenario, which statement is correct?

  • A. To assign resources in the blueprint, you must have completed the device profile and device assignments.
  • B. To assign resources in the blueprint, you must have already created them under global resources.
  • C. All resources are created and assigned under the blueprint's resources tab.
  • D. All resources are automatically assigned values from the available resource pools.
Show answer and explanation ▾

Correct answer: B

Resource pools such as ASN, IP address and VNI pools are created in the global Resources catalog. In the blueprint you then assign those existing pools to the fabric roles that need them, so the pools must exist first.

Why the other options are wrong:

  • A. Assigning resource pools does not depend on device profiles and devices being assigned first.
  • C. The blueprint is where pools are assigned, not where all resources are created.
  • D. Pools are not assigned automatically. You choose which pool each resource group draws from.

Question 4

Which element of an intent-based analytics (IBA) probe is used to specify the database objects to which the probe will apply?

  • A. reference design schema
  • B. graph query
  • C. database nodes
  • D. node-edge relationship
Show answer and explanation ▾

Correct answer: B

A probe's source processor uses a graph query to select the nodes in the blueprint graph database, such as systems or interfaces, that the probe collects data for. The query result decides which objects the probe applies to.

Why the other options are wrong:

  • A. The reference design schema defines the kinds of nodes and relationships that can exist, not which ones a probe targets.
  • C. Database nodes are what the query returns, not the element that specifies the selection.
  • D. A node-edge relationship is part of the graph that a query matches, not the probe element that selects objects.

Question 5

Juniper Apstra provides five different predefined user roles.

Given this information, what is the main difference between the administrator and the user role?

  • A. The user role can only be assigned to specific blueprints.
  • B. The user role can make changes to any other role.
  • C. The user role cannot make any changes to other user types.
  • D. The user role can only make changes to the view role.
Show answer and explanation ▾

Correct answer: C

The administrator role has full permissions, including managing users and roles. The user role can work with the network design and blueprints but has no rights to change other users or their roles.

Why the other options are wrong:

  • A. The predefined user role is not restricted to specific blueprints.
  • B. The user role has no permission to change other roles.
  • D. The user role cannot change any role, including the view role.

Question 6

When viewing the devices in the Managed Devices table, you see that some devices are listed in the OOS-READY state.

What does this state mean for the device?

  • A. The device is ready to have its NOS upgraded.
  • B. The device has an agent installed and is ready to be assigned into a blueprint.
  • C. The device is awaiting the installation of a license.
  • D. The device has been taken out of service for maintenance.
Show answer and explanation ▾

Correct answer: B

OOS-READY means out of service, ready. The device has a working agent, has been acknowledged and is under Apstra management, but it is not yet assigned to a blueprint.

Why the other options are wrong:

  • A. OOS-READY does not describe readiness for a NOS upgrade.
  • C. The state is not related to licensing.
  • D. A device taken out of service for maintenance is in a different state. OOS-READY describes a device waiting to be assigned.

Question 7

What are two agent processes that operate within the Juniper Apstra device agent? (Choose two.)

  • A. routing agent
  • B. authentication agent
  • C. telemetry agent
  • D. deployment agent
Show answer and explanation ▾

Correct answer: C, D

A device agent has two jobs on the managed system: it writes the configuration that Apstra renders, which is the deployment function, and it gathers telemetry and sends it back to the server.

Why the other options are wrong:

  • A. Routing is done by the network operating system on the device, not by an Apstra agent process.
  • B. Authentication is handled on the Apstra server, not by a process inside the device agent.

Question 8

Which two statements are correct about a Juniper Apstra server? (Choose two.)

  • A. The Juniper Apstra server uses Layer 2 to communicate with managed devices.
  • B. The Juniper Apstra server requires one network adapter connection for each managed device.
  • C. The Juniper Apstra server uses Layer 3 to communicate with managed devices.
  • D. The Juniper Apstra server requires a single network adapter.
Show answer and explanation ▾

Correct answer: C, D

The Apstra server talks to device agents over IP through the management network, so it only needs Layer 3 reachability to each device's management address. One network adapter on the server VM is enough for that.

Why the other options are wrong:

  • A. The server does not need to be Layer 2 adjacent to managed devices.
  • B. The server does not need a separate adapter per device. All devices are reached over the routed management network.

Question 9

In Juniper Apstra, which statement about resources is correct?

  • A. User-defined resources are supported.
  • B. The scope of a pool is limited to a single blueprint.
  • C. The scope of a pool can be defined as global or blueprint specific.
  • D. Only the default resources are supported globally.
Show answer and explanation ▾

Correct answer: C

The scope of a resource pool can be global, where the pool is defined once in the Resources catalog and offered to blueprints, or specific to a blueprint.

Why the other options are wrong:

  • A. Apstra pools hold values of predefined resource types such as ASNs, VNIs and IP addresses.
  • B. A pool is not limited to one blueprint, since global pools can serve several blueprints.
  • D. You can create your own global pools in addition to the default ones.

Question 10

What is the purpose of an EVPN Ethernet segment identifier (ESI)?

  • A. to provide a hop count between devices
  • B. to identify Layer 2 frame types for filtering purposes
  • C. to specify a BGP community
  • D. to prevent loops within a LAG connection
Show answer and explanation ▾

Correct answer: D

An ESI identifies the set of links that connect a multihomed device to two or more leaf devices as one Ethernet segment. The leaves use it for split horizon and designated forwarder election, which stops frames from looping back over the LAG.

Why the other options are wrong:

  • A. An ESI does not measure hop count.
  • B. An ESI does not classify frame types for filtering.
  • C. An ESI identifies an Ethernet segment. It is not a BGP attribute used to tag routes.

Question 11

What are two available Juniper Apstra template types? (Choose two.)

  • A. collapsed
  • B. rack-based
  • C. compressed
  • D. device-based
Show answer and explanation ▾

Correct answer: A, B

Apstra templates can be rack-based, pod-based or collapsed. A rack-based template defines a spine layer and a set of racks, and a collapsed template defines a spineless design.

Why the other options are wrong:

  • C. Compressed is not an Apstra template type.
  • D. Device-based is not an Apstra template type.

Question 12

Off-box agents are consuming too much CPU and memory on your Juniper Apstra controller.

In this scenario, how would you solve this problem?

  • A. Add more CPU and memory to the Apstra controler VM.
  • B. Create a worker VM to offload off-box agents from the Apstra controller VM.
  • C. Use on-box agents instead of off-box agents.
  • D. Modify the agent profile to consume less resources.
Show answer and explanation ▾

Correct answer: B

Off-box agents run as containers on the Apstra server. Adding a worker node to the Apstra cluster lets those agent containers run on the worker VM, which takes their CPU and memory load off the controller.

Why the other options are wrong:

  • A. Growing the controller VM keeps all the load on one node and is not how Apstra scales off-box agents.
  • C. Changing agent type is not the scaling method, and on-box agents are not available on every platform.
  • D. An agent profile holds settings such as credentials and packages, not resource limits.

Question 13

In Juniper Apstra terminology, to which network operating system concept does a routing zone refer?

  • A. IRB
  • B. VRF
  • C. VLAN
  • D. access list
Show answer and explanation ▾

Correct answer: B

A routing zone is an isolated Layer 3 domain for a tenant, and Apstra renders it on the devices as a VRF. Virtual networks placed in the same routing zone can route to each other.

Why the other options are wrong:

  • A. An IRB is the gateway interface of a virtual network, not the routing zone itself.
  • C. A VLAN corresponds to a virtual network, not to a routing zone.
  • D. An access list filters traffic and corresponds to security policy, not to a routing zone.

Question 14

You want to route between tenants in a multitenant environment in Juniper Apstra.

What are two ways to accomplish this task? (Choose two.)

  • A. Route between VRFs on a VTEP-enabled device.
  • B. Use an external device to route between tenants.
  • C. Use IBGP to route within the same AS number.
  • D. Use virtual networks to route between VRFs.
Show answer and explanation ▾

Correct answer: A, B

Each tenant sits in its own routing zone, which is a VRF. Traffic between tenants can be routed between the VRFs on a VTEP-enabled fabric device, or sent to an external router or firewall that routes between the tenants.

Why the other options are wrong:

  • C. IBGP inside one AS does not join separate tenant VRFs.
  • D. Virtual networks are Layer 2 segments inside a routing zone. They do not route between VRFs.

Question 15

When creating a probe, an operator wants to make it easy to view that probe's output.

In this scenario, which element must be created to accomplish this task?

  • A. a dashboard widget
  • B. a predefined probe
  • C. a processor
  • D. a stage
Show answer and explanation ▾

Correct answer: A

A widget takes the output of a probe stage and displays it, and widgets are placed on analytics dashboards. Creating a widget for the probe gives the operator a simple view of its output.

Why the other options are wrong:

  • B. A predefined probe is a ready-made probe, not a way to display the output of the probe being created.
  • C. A processor is a building block inside the probe that computes data, not a display element.
  • D. A stage holds the output data of a processor. It already exists in the probe and is not the display element.

Question 16

You are using Juniper Apstra to manage your three-stage IP fabric. You have not enabled any IBA probes other than those that are enabled by default. You notice that both the Analytics tab and its child, Anomalies tab, have red indicators associated with them.

In this scenario, which condition is occurring in your network?

  • A. A managed system has not been acknowledged.
  • B. An expected BGP session between a spine and leaf node has failed to establish.
  • C. A leaf node is experiencing high CPU utilization.
  • D. Someone has manually configured a leaf device without using Apstra.
Show answer and explanation ▾

Correct answer: B

Apstra builds the expected BGP sessions from the blueprint intent and compares them with what the devices report. A spine to leaf session that should be established but is not is raised as an anomaly, which turns the indicators red.

Why the other options are wrong:

  • A. An unacknowledged system is a device management matter under Managed Devices, not a blueprint anomaly.
  • C. High CPU utilization on a leaf is not the condition this scenario describes.
  • D. A manual change on a device is reported as a configuration deviation, not under the Analytics anomalies.

That was 16 of 65.

The full Juniper Networks JN0-481 JNCIS-DC pack has all 65 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack

Not ready yet? Get the first 22 free as one PDF by email. Get the Half Pack →

About the JN0-481 exam

These 16 Juniper Networks JN0-481 JNCIS-DC questions are free here. The free PDF has 22, free by email.

They are drawn from the same bank as the full JN0-481 pack, which has 65 questions in total.

Back to blog