ISA Cybersecurity Fundamentals Specialist Practice Questions with Explanations

Free ISA Cybersecurity Fundamentals Specialist practice questions. 77 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.

IC32 practice questions

Question 1

Which characteristic is MOST closely associated with the deployment of a demilitarized zone (DMZ)?

  • A. Level 4 systems must use the DMZ to communicate with Level 3 and below.
  • B. Level 0 can only interact with Level 1 through the firewall.
  • C. Internet access through the firewall is allowed.
  • D. Email is prevented, thereby mitigating the risk of phishing attempts.
Show answer and explanation ▾

Correct answer: A

A DMZ sits between the enterprise level and the control levels. Traffic from Level 4 must go through servers in the DMZ rather than straight to Level 3 and below, so the control network is never directly exposed.

Why the other options are wrong:

  • B. The DMZ is not about how field devices at Level 0 talk to controllers at Level 1.
  • C. Allowing internet access is not what defines a DMZ.
  • D. A DMZ does not block email.

Question 2

Whose responsibility is it to determine the level of risk an organization is willing to tolerate?

  • A. Management
  • B. Legal Department
  • C. Operations Department
  • D. Safety Department
Show answer and explanation ▾

Correct answer: A

Risk tolerance is a business decision about how much risk to accept, so it is set by management, who are accountable for the organization.

Why the other options are wrong:

  • B. Legal advises on obligations but does not set the tolerance.
  • C. Operations runs the process within the tolerance set above it.
  • D. Safety contributes expertise but does not decide the organization's risk appetite.

Question 3

Which activity is part of establishing policy, organization, and awareness?

  • A. Communicate policies.
  • B. Establish the risk tolerance.
  • C. Identify detailed vulnerabilities.
  • D. Implement countermeasures.
Show answer and explanation ▾

Correct answer: A

Establishing policy, organization, and awareness means writing the security policies, assigning responsibility for them, and communicating them so that everyone knows what is expected. A policy that staff have never been told about cannot shape their behavior.

Why the other options are wrong:

  • B. Establishing the risk tolerance belongs to risk management and the selection of countermeasures.
  • C. Identifying detailed vulnerabilities is part of risk analysis, which comes before policy work.
  • D. Implementing countermeasures is a separate activity that follows the policy and risk decisions.

Question 4

Which service does an Intrusion Detection System (IDS) provide?

  • A. It is the lock on the door for networks and computer systems.
  • B. It is effective against all vulnerabilities in networks and computer systems.
  • C. It blocks malicious activity in networks and computer systems.
  • D. It detects attempts to break into or misuse a computer system.
Show answer and explanation ▾

Correct answer: D

An IDS watches traffic or hosts and raises an alert when it sees signs of a break-in attempt or misuse. It detects; it does not stop the activity itself.

Why the other options are wrong:

  • A. A lock is a preventive control, such as a firewall or access control, not detection.
  • B. No single tool is effective against all vulnerabilities.
  • C. Blocking is the job of an intrusion prevention system.

Question 5

Which is the PRIMARY responsibility of the network layer of the Open Systems Interconnection (OSI) model?

  • A. Forwards packets, including routing through intermediate routers
  • B. Gives transparent transfer of data between end users
  • C. Provides the rules for framing, converting electrical signals to data
  • D. Handles the physics of getting a message from one device to another
Show answer and explanation ▾

Correct answer: A

The network layer, Layer 3, handles logical addressing and forwards packets from source to destination, including routing them through intermediate routers across different networks. IP is the best known protocol at this layer.

Why the other options are wrong:

  • B. Transparent transfer of data between end users is the job of the transport layer.
  • C. Framing and converting electrical signals to data is the job of the data link layer.
  • D. The physics of moving a message from one device to another is handled by the physical layer.

Question 6

Which steps are included in the ISA/IEC 62443 assess phase?

  • A. Cybersecurity requirements specification and detailed cyber risk assessment
  • B. Cybersecurity requirements specification and allocation of IACS assets to zones and conduits
  • C. Detailed cyber risk assessment and cybersecurity maintenance, monitoring, and management of change
  • D. Allocation of IACS assets to zones and conduits, and detailed cyber risk assessment
Show answer and explanation ▾

Correct answer: D

The assess phase of the ISA/IEC 62443 lifecycle covers the risk work: a high-level cyber risk assessment, allocation of IACS assets to zones and conduits, and a detailed cyber risk assessment. Its results feed the phases that follow.

Why the other options are wrong:

  • A. The cybersecurity requirements specification is produced in the develop and implement phase, not the assess phase.
  • B. The cybersecurity requirements specification is produced in the develop and implement phase, not the assess phase.
  • C. Cybersecurity maintenance, monitoring, and management of change belong to the maintain phase.

Question 7

What type of security level defines what a component or system is capable of meeting?

  • A. Capability security level
  • B. Achieved security level
  • C. Design security level
  • D. Target security level
Show answer and explanation ▾

Correct answer: A

The capability security level (SL-C) is the security level that a component or system is able to meet when it is properly configured and integrated. It describes what the product can do, independent of any particular installation.

Why the other options are wrong:

  • B. The achieved security level is the level actually measured for a zone or conduit once the system is in place.
  • C. Design security level is not one of the three security level types defined in ISA/IEC 62443.
  • D. The target security level is the level the asset owner wants for a zone or conduit, based on the risk assessment.

Question 8

Which steps are part of implementing countermeasures?

  • A. Establish the risk tolerance and select common countermeasures.
  • B. Establish the risk tolerance and update the business continuity plan.
  • C. Select common countermeasures and update the business continuity plan.
  • D. Select common countermeasures and collaborate with stakeholders.
Show answer and explanation ▾

Correct answer: A

Implementing countermeasures starts with the organization establishing its risk tolerance, which sets how much risk is acceptable, and then selecting a common set of countermeasures that brings risk down to that level across the IACS.

Why the other options are wrong:

  • B. Updating the business continuity plan is not one of the steps of implementing countermeasures.
  • C. Updating the business continuity plan is not one of the steps of implementing countermeasures.
  • D. Collaborating with stakeholders is not one of the two steps that make up implementing countermeasures.

Question 9

Authorization (user accounts) must be granted based on which of the following?

  • A. Individual preferences
  • B. Common needs for large groups
  • C. Specific roles
  • D. System complexity
Show answer and explanation ▾

Correct answer: C

Access accounts are granted according to the specific role a person performs, so each user receives only the privileges that the job requires. This is the principle of least privilege applied through role-based authorization.

Why the other options are wrong:

  • A. Individual preferences have no place in deciding who is authorized to do what.
  • B. Granting access on the common needs of large groups gives many users privileges they do not need.
  • D. System complexity does not determine what a user should be authorized to do.

Question 10

Which of the following refers to internal rules that govern how an organization protects critical system resources?

  • A. Formal guidance
  • B. Legislation
  • C. Security policy
  • D. Code of conduct
Show answer and explanation ▾

Correct answer: C

A security policy is the set of internal rules, approved by management, that govern how an organization protects its critical system resources. Procedures and technical controls are then built to carry out that policy.

Why the other options are wrong:

  • A. Formal guidance offers recommendations and is not the organization's own binding rule set.
  • B. Legislation is law imposed from outside the organization, not an internal rule.
  • D. A code of conduct covers general employee behavior and ethics, not the protection of system resources.

Question 11

In which layer is the physical address assigned?

  • A. Layer 1
  • B. Layer 2
  • C. Layer 3
  • D. Layer 7
Show answer and explanation ▾

Correct answer: B

The physical address of a device is its MAC address, which belongs to the data link layer, Layer 2. Switches use this address to deliver frames to the right device on the local network.

Why the other options are wrong:

  • A. Layer 1 deals with electrical signals and cabling and has no addressing.
  • C. Layer 3 uses logical addresses such as IP addresses, not physical addresses.
  • D. Layer 7 is the application layer and does not assign hardware addresses.

Question 12

Which of the following is an element of security policy, organization, and awareness?

  • A. Product development requirements
  • B. Staff training and security awareness
  • C. Technical requirement assessment
  • D. Penetration testing
Show answer and explanation ▾

Correct answer: B

Staff training and security awareness is one of the elements grouped under security policy, organization, and awareness in the cybersecurity management system. People can follow security policies only when they have been trained on them.

Why the other options are wrong:

  • A. Product development requirements apply to suppliers building products and are not part of this element group.
  • C. Technical requirement assessment is not an element of security policy, organization, and awareness.
  • D. Penetration testing is a technical test activity, not an element of policy, organization, and awareness.

Question 13

Which of the following is a cause for the increase in attacks on IACS?

  • A. Use of proprietary communications protocols
  • B. The move away from commercial off the shelf (COTS) systems, protocols, and networks
  • C. Knowledge of exploits and tools readily available on the Internet
  • D. Fewer personnel with system knowledge having access to IACS
Show answer and explanation ▾

Correct answer: C

Detailed knowledge of exploits, along with ready-made attack tools, is freely available on the Internet. This lowers the skill needed to attack an industrial automation and control system and has driven the rise in attacks.

Why the other options are wrong:

  • A. Proprietary communications protocols are less familiar to attackers and do not explain the increase.
  • B. The trend has been toward commercial off the shelf systems, protocols, and networks, not away from them.
  • D. Fewer people with system knowledge and access would reduce exposure, not increase attacks.

Question 14

What are the connections between security zones called?

  • A. Firewalls
  • B. Tunnels
  • C. Pathways
  • D. Conduits
Show answer and explanation ▾

Correct answer: D

In ISA/IEC 62443, a conduit is the logical grouping of communication channels that connects two or more security zones and shares common security requirements. All traffic between zones travels through conduits, where it can be controlled.

Why the other options are wrong:

  • A. Firewalls are devices that can protect a connection, but they are not the name for the connection between zones.
  • B. Tunnels are encrypted paths used by VPNs, not the standard's term for connections between zones.
  • C. Pathways is not the term the standard uses for connections between security zones.

Question 15

Which is a commonly used protocol for managing secure data transmission on the Internet?

  • A. Datagram Transport Layer Security (DTLS)
  • B. Microsoft Point-to-Point Encryption (MPPE)
  • C. Secure Telnet
  • D. Secure Sockets Layer (SSL)
Show answer and explanation ▾

Correct answer: D

Secure Sockets Layer (SSL) is the widely used protocol for securing data sent across the Internet, most visibly in secure web browsing. It encrypts the session and authenticates the server by means of digital certificates.

Why the other options are wrong:

  • A. DTLS secures datagram traffic and is far less commonly used for general Internet data transmission.
  • B. MPPE encrypts point-to-point dial-up and VPN links and is not the common protocol for Internet data.
  • C. Secure Telnet is not the commonly used protocol for managing secure data transmission on the Internet.

Question 16

Why is OPC Classic considered firewall unfriendly?

  • A. OPC Classic uses DCOM, which dynamically assigns any port between 1024 and 65535.
  • B. OPC Classic is allowed to use only port 80.
  • C. OPC Classic works with control devices from different manufacturers.
  • D. OPC Classic is an obsolete communication standard.
Show answer and explanation ▾

Correct answer: A

OPC Classic is built on Microsoft DCOM, which negotiates a dynamically assigned port anywhere from 1024 to 65535 for each connection. A firewall would have to leave that whole range open, which defeats the purpose of filtering.

Why the other options are wrong:

  • B. OPC Classic is not limited to port 80, and a single fixed port would be easy for a firewall to manage.
  • C. Working with devices from different manufacturers is a benefit of OPC and has nothing to do with firewalls.
  • D. The age of the standard is not what makes OPC Classic hard to pass through a firewall.

Question 17

Which layer specifies the rules for Modbus Application Protoco1 (MBAP)?

  • A. Data link layer
  • B. Session layer
  • C. Presentation layer
  • D. Application layer
Show answer and explanation ▾

Correct answer: D

The Modbus Application Protocol is an application layer messaging protocol, placed at Layer 7 of the OSI model. It defines the function codes and data that clients and servers exchange, independent of the layers underneath.

Why the other options are wrong:

  • A. The data link layer handles framing and physical addressing, not Modbus application messages.
  • B. The session layer manages sessions between applications and does not define the Modbus application rules.
  • C. The presentation layer formats and translates data and does not define the Modbus application rules.

Question 18

Which is a role of the application layer?

  • A. Includes protocols specific to network applications such as email, file transfer, and reading data registers in a PLC
  • B. Includes user applications specific to network applications such as email, file transfer, and reading data registers in a PLC
  • C. Provides the mechanism for opening, closing, and managing a session between end-user application processes
  • D. Delivers and formats information, possibly with encryption and security
Show answer and explanation ▾

Correct answer: A

The application layer contains the protocols that network applications use, such as those for email, file transfer, and reading data registers in a PLC. It holds the protocols that serve the application, not the user application itself.

Why the other options are wrong:

  • B. User applications sit above the OSI model and are not part of the application layer.
  • C. Opening, closing, and managing sessions between application processes is the role of the session layer.
  • D. Delivering and formatting information, possibly with encryption, is the role of the presentation layer.

Question 19

Which factor drives the selection of countermeasures?

  • A. Foundational requirements
  • B. Output from a risk assessment
  • C. Security levels
  • D. System design
Show answer and explanation ▾

Correct answer: B

Countermeasures are selected to reduce the risks that the risk assessment has identified and ranked. The assessment output shows which threats and vulnerabilities matter most, so protection is applied where it is needed.

Why the other options are wrong:

  • A. Foundational requirements group the security requirements but do not show which risks a site has to reduce.
  • C. Security levels are themselves set from the risk assessment and do not drive the selection on their own.
  • D. System design is the subject being protected and does not determine which countermeasures are needed.

Question 20

Which layer in the Open Systems Interconnection (OSI) model would include the use of the File Transfer Protocol (FTP)?

  • A. Application layer
  • B. Data link layer
  • C. Session layer
  • D. Transport layer
Show answer and explanation ▾

Correct answer: A

File Transfer Protocol (FTP) is an application layer protocol, Layer 7 of the OSI model. It provides file transfer services directly to network applications and relies on TCP at the transport layer below it.

Why the other options are wrong:

  • B. The data link layer handles frames and physical addressing on a local network, not file transfer.
  • C. The session layer manages sessions between applications and does not contain FTP.
  • D. The transport layer carries FTP traffic by means of TCP, but FTP itself is not a transport protocol.

Question 21

Which of the following is a trend that has caused a significant percentage of security vulnerabilities?

  • A. IACS developing into a network of air-gapped systems
  • B. IACS evolving into a number of closed proprietary systems
  • C. IACS using equipment designed for measurement and control
  • D. IACS becoming integrated with business and enterprise systems
Show answer and explanation ▾

Correct answer: D

Control systems that once ran in isolation are now connected to business and enterprise networks to share production data. That integration exposes them to threats that reach the enterprise network and accounts for a large share of vulnerabilities.

Why the other options are wrong:

  • A. The trend has been toward more connection, not toward air-gapped systems.
  • B. The trend has been toward open, commercial technology, not toward closed proprietary systems.
  • C. Using equipment designed for measurement and control is normal practice and is not the trend behind the vulnerabilities.

Question 22

Why is patch management more difficult for IACS than for business systems?

  • A. Overtime pay is required for technicians.
  • B. Many more approvals are required.
  • C. Patching a live automation system can create safety risks.
  • D. Business systems automatically update.
Show answer and explanation ▾

Correct answer: C

An automation system controls a running physical process, so a patch that causes a reboot or changes behavior can upset that process and create a safety risk. Patches must therefore be tested and applied during planned outages.

Why the other options are wrong:

  • A. Overtime pay for technicians is not what makes IACS patching harder than business system patching.
  • B. The number of approvals is not the reason patch management is harder for IACS.
  • D. Automatic updating of business systems does not explain why patching an IACS is difficult.

Question 23

Which is a PRIMARY reason why network security is important in IACS environments?

  • A. PLCs are inherently unreliable.
  • B. PLCs are programmed using ladder logic.
  • C. PLCs use serial or Ethernet communications methods.
  • D. PLCs under cyber attack can have costly and dangerous impacts.
Show answer and explanation ▾

Correct answer: D

PLCs directly control physical equipment, so a cyber attack on them can cause production loss, equipment damage, environmental harm, or injury. Protecting the network that reaches them prevents those costly and dangerous consequences.

Why the other options are wrong:

  • A. PLCs are built for high reliability, so unreliability is not a reason for network security.
  • B. The programming language used in a PLC is not a reason for network security.
  • C. The communications method a PLC uses is a technical detail, not the primary reason network security matters.

Question 24

Which statement is TRUE regarding Intrusion Detection Systems (IDS)?

  • A. Modern IDS recognize IACS devices by default.
  • B. They are very inexpensive to design and deploy.
  • C. They are effective against known vulnerabilities.
  • D. They require a small amount of care and feeding
Show answer and explanation ▾

Correct answer: C

An intrusion detection system compares traffic or host activity against signatures of known attacks, so it is effective at spotting attempts to exploit known vulnerabilities. It is much weaker against attacks for which no signature exists.

Why the other options are wrong:

  • A. An IDS does not recognize IACS devices and protocols by default and needs rules written for them.
  • B. Designing and deploying an IDS takes real cost and effort.
  • D. An IDS needs continual tuning, signature updates, and review of its alerts.

Question 25

Which is the BEST practice when establishing security zones?

  • A. Security zones should contain assets that share common security requirements.
  • B. Security zones should align with physical network segments.
  • C. Assets within the same logical communication network should be in the same security zone.
  • D. All components in a large or complex system should be in the same security zone.
Show answer and explanation ▾

Correct answer: A

A security zone is a grouping of logical or physical assets that share common security requirements. Grouping assets this way lets one set of countermeasures and one target security level be applied to the whole zone.

Why the other options are wrong:

  • B. Zones are defined by security requirements, not by how the physical network is segmented.
  • C. Assets on the same logical network can have different security requirements and belong in different zones.
  • D. Placing every component of a large system in one zone ignores the different security needs of its parts.

Question 26

Security Levels (SLs) are broken down into which three types?

  • A. SL-1, SL-2, and SL-3
  • B. Target, capability, and achieved
  • C. Target, capability, and availability
  • D. Target, capacity, and achieved
Show answer and explanation ▾

Correct answer: B

ISA/IEC 62443 defines three types of security level: target (SL-T), the level wanted for a zone or conduit; capability (SL-C), the level a component or system can provide; and achieved (SL-A), the level actually measured in place.

Why the other options are wrong:

  • A. SL-1, SL-2, and SL-3 are numbered levels of protection, not the three types of security level.
  • C. Availability is not one of the three security level types.
  • D. Capacity is not one of the three security level types.

Question 27

Which is an important difference between IT systems and IACS?

  • A. The IACS security priority is integrity.
  • B. The IT security priority is availability.
  • C. IACS cybersecurity must address safety issues.
  • D. Routers are not used in IACS networks.
Show answer and explanation ▾

Correct answer: C

An IACS controls physical processes, so a security failure can harm people, equipment, and the environment. IACS cybersecurity therefore has to address health, safety, and environmental consequences, which ordinary IT security rarely needs to consider.

Why the other options are wrong:

  • A. The first security priority for an IACS is availability, not integrity.
  • B. The first security priority for IT systems is confidentiality, not availability.
  • D. Routers are used in IACS networks just as they are in IT networks.

Question 28

Which of the following is a recommended default rule for IACS firewalls?

  • A. Allow all traffic by default.
  • B. Allow IACS devices to access the Internet.
  • C. Allow traffic directly from the IACS network to the enterprise network.
  • D. Block all traffic by default.
Show answer and explanation ▾

Correct answer: D

An IACS firewall should deny all traffic by default and then permit only the specific connections that are needed. Anything not explicitly allowed is blocked, which keeps unknown and unexpected traffic out of the control network.

Why the other options are wrong:

  • A. Allowing all traffic by default removes the protection a firewall is meant to give.
  • B. IACS devices should not have access to the Internet.
  • C. Traffic should not pass directly between the IACS network and the enterprise network.

Question 29

What do packet filter firewalls examine?

  • A. The packet structure and sequence
  • B. The relationships between packets in a session
  • C. Every incoming packet up to the application layer
  • D. Only the source, destination, and ports in the header of each packet
Show answer and explanation ▾

Correct answer: D

A packet filter firewall checks each packet on its own, looking only at header fields such as the source address, destination address, and port numbers. It compares these with its rule list and keeps no record of earlier packets.

Why the other options are wrong:

  • A. A packet filter does not analyze packet structure and sequence, it reads only basic header fields.
  • B. Tracking the relationships between packets in a session is what a stateful inspection firewall does.
  • C. Examining every packet up to the application layer is what an application or deep packet inspection firewall does.

Question 30

Who must be included in a training and security awareness program?

  • A. Vendors and suppliers
  • B. Employees
  • C. All personnel
  • D. Temporary staff
Show answer and explanation ▾

Correct answer: C

Everyone who can affect the security of the IACS needs training and awareness, which means all personnel: employees, contractors, temporary staff, and third parties. A program that leaves any group out leaves a gap an attacker can use.

Why the other options are wrong:

  • A. Vendors and suppliers are only one of the groups that need to be included.
  • B. Employees are only one of the groups that need to be included.
  • D. Temporary staff are only one of the groups that need to be included.

Question 31

Which communications system covers a large geographic area?

  • A. Campus Area Network (CAN)
  • B. Local Area Network (LAN)
  • C. Storage Area Network (SAN)
  • D. Wide Area Network (WAN)
Show answer and explanation ▾

Correct answer: D

A wide area network (WAN) connects sites across a large geographic area, such as cities, regions, or countries, usually over links leased from a telecommunications carrier.

Why the other options are wrong:

  • A. A campus area network covers a group of nearby buildings, not a large geographic area.
  • B. A local area network covers a single building or site.
  • C. A storage area network connects servers to storage devices and is not defined by geographic reach.

Question 32

Which is the PRIMARY reason why Modbus over Ethernet is easy to manage in a firewall?

  • A. Modbus uses a single master to communicate with multiple slaves using simple commands.
  • B. Modbus is a proprietary protocol that is widely supported by vendors.
  • C. Modbus uses explicit source and destination IP addresses and a single known TCP port.
  • D. Modbus has no known security vulnerabilities, so firewall rules are simple to implement.
Show answer and explanation ▾

Correct answer: C

Modbus over Ethernet carries explicit source and destination IP addresses and uses one well-known TCP port, 502. A firewall rule can therefore name exactly which devices may talk to each other on that single port.

Why the other options are wrong:

  • A. The master and slave command model does not make the traffic easier for a firewall to filter.
  • B. Modbus is an open protocol, not a proprietary one.
  • D. Modbus has well-known security weaknesses, including no authentication of commands.

Question 33

Which of the following is the BEST example of detection-in-depth best practices?

  • A. Firewalls and unexpected protocols being used
  • B. IDS sensors deployed within multiple zones in the production environment
  • C. Role-based access control and unusual data transfer patterns
  • D. Role-based access control and VPNs
Show answer and explanation ▾

Correct answer: B

Detection in depth places monitoring at several layers of the network so that an intrusion missed at one point is caught at another. IDS sensors deployed in multiple zones of the production environment do exactly that.

Why the other options are wrong:

  • A. A firewall is a prevention control, and this pairing does not describe layered detection.
  • C. Role-based access control is a prevention control, not a detection practice.
  • D. Role-based access control and VPNs are both prevention controls and detect nothing.

Question 34

What are the four main categories for documents in the ISA-62443 (IEC 62443) series?

  • A. General, Policies and Procedures, System, and Component
  • B. End-User, Integrator, Vendor, and Regulator
  • C. Assessment, Mitigation, Documentation, and Maintenance
  • D. People, Processes, Technology, and Training
Show answer and explanation ▾

Correct answer: A

The ISA/IEC 62443 series is organized into four groups: General (62443-1), Policies and Procedures (62443-2), System (62443-3), and Component (62443-4). Each group addresses a different audience and level of detail.

Why the other options are wrong:

  • B. End-user, integrator, vendor, and regulator are roles, not the categories of the document series.
  • C. Assessment, mitigation, documentation, and maintenance are activities, not the categories of the document series.
  • D. People, processes, technology, and training are not the categories of the document series.

Question 35

What are the three main components of the ISASecure Integrated Threat Analysis (ITA) Program?

  • A. Software development security assurance, functional security assessment, and communications robustness testing
  • B. Software robustness security testing, functional software assessment assurance, and essential security functionality assessment
  • C. Communications robustness testing, functiona1 security assurance, and software robustness communications
  • D. Communication speed, disaster recovery, and essential security functionality assessment
Show answer and explanation ▾

Correct answer: A

The ISASecure embedded device certification was built on three technical elements: an assessment of how securely the software was developed, a functional security assessment of the device's security capabilities, and communication robustness testing of its network interfaces.

Why the other options are wrong:

  • B. These names scramble the real elements and do not match the three components of the program.
  • C. These names scramble the real elements and do not match the three components of the program.
  • D. Communication speed and disaster recovery are not components of the program.

Question 36

Which of the following can be employed as a barrier device in a segmented network?

  • A. Router
  • B. Unmanaged switch
  • C. VPN
  • D. Domain controller
Show answer and explanation ▾

Correct answer: A

A router sits between network segments and can filter the traffic passing between them with access control lists. That makes it usable as a barrier device at the boundary of a segmented network.

Why the other options are wrong:

  • B. An unmanaged switch forwards all traffic and has no means of filtering it.
  • C. A VPN encrypts traffic between endpoints and does not act as a barrier between segments.
  • D. A domain controller authenticates users and computers and does not separate network segments.

Question 37

What is the purpose of ISO/IEC 15408 (Common Criteria)?

  • A. To define a security management organization
  • B. To describe a process for risk management
  • C. To define a product development evaluation methodology
  • D. To describe what constitutes a secure product
Show answer and explanation ▾

Correct answer: C

ISO/IEC 15408, known as Common Criteria, sets out a methodology for evaluating the security of products. It defines how security requirements are stated and how a product is assessed against them at a chosen assurance level.

Why the other options are wrong:

  • A. Defining a security management organization is the subject of information security management standards, not Common Criteria.
  • B. Common Criteria does not describe a risk management process.
  • D. Common Criteria gives a way to evaluate products and does not itself state what makes a product secure.

Question 38

What does Layer 1 of the ISO/OSI protocol stack provide?

  • A. Data encryption, routing, and end-to-end connectivity
  • B. Framing, converting electrical signals to data, and error checking
  • C. The electrical and physical specifications of the data connection
  • D. User applications specific to network applications such as reading data registers in a PLC
Show answer and explanation ▾

Correct answer: C

Layer 1, the physical layer, defines the electrical and physical specifications of the data connection: cables, connectors, voltages, and signaling. It moves raw bits across the medium and has no knowledge of frames or addresses.

Why the other options are wrong:

  • A. Routing and end-to-end connectivity belong to the network and transport layers.
  • B. Framing and error checking are functions of the data link layer.
  • D. Application-specific functions such as reading PLC data registers sit at the top of the stack, not at Layer 1.

Question 39

At Layer 4 of the Open Systems Interconnection (OSI) model, what identifies the application that will handle a packet inside a host?

  • A. A TCP/UDP application ID
  • B. A TCP/UDP host ID
  • C. A TCP/UDP port number
  • D. A TCP/UDP registry number
Show answer and explanation ▾

Correct answer: C

At Layer 4, TCP and UDP use port numbers to identify which application on a host should receive a packet. The IP address delivers the packet to the host, and the port number delivers it to the right application.

Why the other options are wrong:

  • A. TCP and UDP do not use a field called an application ID.
  • B. The host is identified by its IP address at Layer 3, not by a TCP or UDP host ID.
  • D. TCP and UDP do not use a field called a registry number.

Question 40

Safety management staff are stakeholders of what security program development?

  • A. CSMS
  • B. CSA
  • C. ERM
  • D. SPRP
Show answer and explanation ▾

Correct answer: A

A cybersecurity management system (CSMS) is developed with input from many stakeholders, and safety management staff are among them because a cyber incident in an IACS can have health, safety, and environmental consequences.

Why the other options are wrong:

  • B. CSA is not the security program that ISA/IEC 62443 describes for an IACS.
  • C. ERM is not the security program that ISA/IEC 62443 describes for an IACS.
  • D. SPRP is not the security program that ISA/IEC 62443 describes for an IACS.

Question 41

Which type of cryptographic algorithms requires more than one key?

  • A. Block ciphers
  • B. Stream ciphers
  • C. Symmetric (private) key
  • D. Asymmetric (public) key
Show answer and explanation ▾

Correct answer: D

Asymmetric cryptography uses a mathematically related pair for each party, one public and one private. Data encrypted with one of the pair can be decrypted only with the other, so more than one is always needed.

Why the other options are wrong:

  • A. Block ciphers are symmetric algorithms that use one shared secret for both encryption and decryption.
  • B. Stream ciphers are symmetric algorithms that use one shared secret for both encryption and decryption.
  • C. Symmetric cryptography uses one shared secret for both encryption and decryption.

Question 42

Multiuser accounts and shared passwords inherently carry which of the following risks?

  • A. Privilege escalation
  • B. Buffer overflow
  • C. Unauthorized access
  • D. Race conditions
Show answer and explanation ▾

Correct answer: C

When several people share one account and password, the password spreads, is rarely changed when someone leaves, and actions cannot be traced to a person. That makes it easy for someone without authorization to gain access.

Why the other options are wrong:

  • A. Privilege escalation exploits a flaw to gain higher rights and is not the inherent risk of sharing a password.
  • B. A buffer overflow is a software coding flaw and has nothing to do with shared accounts.
  • D. A race condition is a software timing flaw and has nothing to do with shared accounts.

Question 43

What is the name of the protocol that implements serial Modbus over Ethernet?

  • A. MODBUS/CIP
  • B. MODBUS/Ethernet
  • C. MODBUS/Plus
  • D. MODBUS/TCP
Show answer and explanation ▾

Correct answer: D

Modbus/TCP carries Modbus messages over Ethernet by wrapping them in TCP/IP packets, using TCP port 502. It keeps the same function codes as serial Modbus while replacing the serial link with a standard network.

Why the other options are wrong:

  • A. MODBUS/CIP is not the protocol that carries Modbus over Ethernet.
  • B. MODBUS/Ethernet is not the name of the protocol that carries Modbus over Ethernet.
  • C. Modbus Plus is a separate token-passing network, not Modbus over Ethernet.

Question 44

What are the two sublayers of Layer 2?

  • A. HIDS ana NIDS
  • B. LLC and MAC
  • C. OPC and DCOM
  • D. VLAN and VPN
Show answer and explanation ▾

Correct answer: B

The data link layer is divided into two sublayers. Logical Link Control (LLC) provides the interface to the network layer, and Media Access Control (MAC) handles physical addressing and access to the shared medium.

Why the other options are wrong:

  • A. HIDS and NIDS are types of intrusion detection system, not sublayers.
  • C. OPC and DCOM are application-level technologies, not sublayers of Layer 2.
  • D. VLAN and VPN are network segmentation and tunneling technologies, not sublayers of Layer 2.

Question 45

In a defense-in-depth strategy, what is the purpose of role-based access control?

  • A. Ensures that users can access systems from remote locations
  • B. Ensures that users can access only certain devices on the network
  • C. Ensures that users can access only the functions they need for their job
  • D. Ensures that users correctly manage their username and password
Show answer and explanation ▾

Correct answer: C

Role-based access control assigns permissions to roles and then assigns users to those roles, so each person can use only the functions that the job requires. It applies least privilege as one layer of a defense-in-depth strategy.

Why the other options are wrong:

  • A. Remote access is provided by other technologies and is not the purpose of role-based access control.
  • B. Limiting which devices can be reached is the job of network segmentation, not role-based access control.
  • D. Managing usernames and passwords correctly is a matter of account policy, not role-based access control.

Question 46

Which of the following ISA-99 (IEC 62443) Reference Model levels is named correctly?

  • A. Level 1: Supervisory Control
  • B. Level 2: Quality Control
  • C. Level 3: Operations Management
  • D. Level 4: Process
Show answer and explanation ▾

Correct answer: C

In the reference model, Level 3 is Operations Management, covering the systems that manage production workflow at the site. Below it are Level 2 Supervisory Control, Level 1 Basic Control, and Level 0 Process.

Why the other options are wrong:

  • A. Level 1 is Basic Control; Supervisory Control is Level 2.
  • B. Level 2 is Supervisory Control, not Quality Control.
  • D. Level 4 is Enterprise Systems; Process is Level 0.

Question 47

Which is a physical layer standard for serial communications between two or more devices?

  • A. RS232
  • B. RS235
  • C. RS432
  • D. RS485
Show answer and explanation ▾

Correct answer: D

RS485 is a physical layer standard for serial communications that supports multidrop wiring, so two or more devices can share the same pair of wires. It is widely used for industrial networks such as serial Modbus.

Why the other options are wrong:

  • A. RS232 is a point-to-point standard that links only two devices.
  • B. RS235 is not a serial communications standard.
  • C. RS432 is not a serial communications standard.

Question 48

What is the definition of “defense in depth” when referring to cybersecurity?

  • A. Using countermeasures that have intrinsic technical depth.
  • B. Aligning all resources to provide a broad technical gauntlet
  • C. Requiring a minimum distance requirement between security assets
  • D. Applying multiple countermeasures in a layered or stepwise manner
Show answer and explanation ▾

Correct answer: D

Defense in depth means applying multiple countermeasures in a layered or stepwise manner, so that an attacker who defeats one layer still faces others. No single countermeasure is relied on to protect the system.

Why the other options are wrong:

  • A. Defense in depth is about layering several countermeasures, not about the technical depth of any one of them.
  • B. A broad technical gauntlet is not the definition of defense in depth.
  • C. Defense in depth has nothing to do with physical distance between security assets.

Question 49

Which is one of the PRIMARY goals of providing a framework addressing secure product development life-cycle requirements?

  • A. Aligned development process
  • B. Aligned needs of industrial users
  • C. Well-documented security policies and procedures
  • D. Defense-in-depth approach to designing
Show answer and explanation ▾

Correct answer: D

A secure product development life-cycle framework aims to have security built into products from the start, and a primary goal is a defense-in-depth approach to design, so that a product does not depend on a single protective measure.

Why the other options are wrong:

  • A. An aligned development process is not the primary goal of the secure development life-cycle requirements.
  • B. Aligning the needs of industrial users is not the primary goal of the secure development life-cycle requirements.
  • C. Documented security policies and procedures are the concern of the asset owner's security program, not of product development requirements.

Question 50

Which of the following is the BEST reason for periodic audits?

  • A. To confirm audit procedures
  • B. To meet regulations
  • C. To validate that security policies and procedures are performing
  • D. To adhere to a published or approved schedule
Show answer and explanation ▾

Correct answer: C

Periodic audits check that security policies and procedures are actually being followed and are performing as intended. They show where practice has drifted from policy so that the security program can be corrected.

Why the other options are wrong:

  • A. Confirming the audit procedures themselves is not the purpose of auditing the security program.
  • B. Meeting regulations can be a result of auditing, but it is not the best reason to audit.
  • D. Keeping to a schedule is a matter of timing and is not a reason for the audit.

Question 51

What is defined as the hardware and software components of an IACS?

  • A. COTS software and hardware
  • B. Electronic security
  • C. Control system
  • D. Cybersecurity
Show answer and explanation ▾

Correct answer: C

The control system is defined as the hardware and software components of an IACS. The IACS as a whole also takes in the personnel, policies, and procedures that surround those components.

Why the other options are wrong:

  • A. COTS software and hardware describes how products are sourced, not the components of an IACS.
  • B. Electronic security is the protection applied to a system, not its hardware and software components.
  • D. Cybersecurity is the protection applied to a system, not its hardware and software components.

Question 52

What does the abbreviation CSMS round in ISA 62443-2-1 represent?

  • A. Control System Management System
  • B. Control System Monitoring System
  • C. Cyber Security Management System
  • D. Cyber Security Monitoring System
Show answer and explanation ▾

Correct answer: C

CSMS stands for Cyber Security Management System. ISA 62443-2-1 describes the elements an asset owner needs in order to establish and run such a program for an IACS.

Why the other options are wrong:

  • A. The CS in CSMS stands for Cyber Security, not Control System.
  • B. CSMS does not stand for Control System Monitoring System.
  • D. The first M in CSMS stands for Management, not Monitoring.

Question 53

Which is the implementation of PROFIBUS over Ethernet for non-safety-related communications?

  • A. PROFIBUS DP
  • B. PROFIBUS PA
  • C. PROFINET
  • D. PROFISAFE
Show answer and explanation ▾

Correct answer: C

PROFINET is the industrial Ethernet standard from the PROFIBUS organization and carries standard, non-safety automation data over Ethernet.

Why the other options are wrong:

  • A. PROFIBUS DP is a serial fieldbus for factory automation, not an Ethernet implementation.
  • B. PROFIBUS PA is a fieldbus for process automation instruments, not an Ethernet implementation.
  • D. PROFIsafe is the profile for safety-related communications.

Question 54

Which of the following attacks relies on a human weakness to succeed?

  • A. Denial-of-service
  • B. Phishing
  • C. Escalation-of-privileges
  • D. Spoofing
Show answer and explanation ▾

Correct answer: B

Phishing is a social engineering attack. It works only when a person is tricked into opening a malicious attachment, following a link, or giving up credentials, so it depends on human error and not on a technical flaw.

Why the other options are wrong:

  • A. A denial-of-service attack overwhelms a system with traffic or requests and needs no human mistake.
  • C. Escalation of privileges exploits a technical flaw or misconfiguration in a system.
  • D. Spoofing forges an identity or address at the technical level and does not rely on a human weakness.

Question 55

Which of the ISA 62443 standards focuses on the process of developing secure products?

  • A. 62443-1-1
  • B. 62443-3-2
  • C. 62443-3-3
  • D. 62443-4-1
Show answer and explanation ▾

Correct answer: D

ISA/IEC 62443-4-1 sets out the secure product development life-cycle requirements. It defines the process a supplier follows to design, build, test, and maintain secure IACS products.

Why the other options are wrong:

  • A. 62443-1-1 covers terminology, concepts, and models for the series.
  • B. 62443-3-2 covers security risk assessment for system design.
  • C. 62443-3-3 covers system security requirements and security levels.

Question 56

Which is the PRIMARY objective when defining a security zone?

  • A. All assets in the zone must be from the same vendor.
  • B. All assets in the zone must share the same security requirements.
  • C. All assets in the zone must be at the same level in the Purdue model.
  • D. All assets in the zone must be physically located in the same area.
Show answer and explanation ▾

Correct answer: B

A security zone groups assets that share the same security requirements, so one target security level and one set of countermeasures can apply to all of them. Shared requirements are the defining feature of a zone.

Why the other options are wrong:

  • A. A zone can contain assets from many vendors.
  • C. A zone can span more than one level of the Purdue model.
  • D. A zone can be logical and can include assets in different physical locations.

Question 57

Which is the BEST deployment system for malicious code protection?

  • A. Network segmentation
  • B. IACS protocol converters
  • C. Application whitelisting (AWL)
  • D. Zones and conduits
Show answer and explanation ▾

Correct answer: C

Application whitelisting allows only approved programs to run and blocks everything else, including malicious code that has never been seen before. It suits control systems because their software changes rarely and signature updates are hard to apply.

Why the other options are wrong:

  • A. Network segmentation limits how far malicious code can spread but does not stop it from running.
  • B. Protocol converters translate between protocols and give no protection against malicious code.
  • D. Zones and conduits organize and separate assets but do not stop malicious code from running on a host.

Question 58

The Risk Analysis category contains background information that is used where?

  • A. Many other elements in the CSMS
  • B. Elements external to the CSMS
  • C. Only the Assessment element
  • D. Only the Risk ID element
Show answer and explanation ▾

Correct answer: A

Risk Analysis is the first main category of the CSMS. It supplies the background information, such as the business rationale and the identified and assessed risks, that feeds into many of the other elements of the CSMS.

Why the other options are wrong:

  • B. The information is used by elements inside the CSMS, not by elements external to it.
  • C. The information is not limited to a single element.
  • D. The information is not limited to a single element.

Question 59

Which organization manages the ISASecure conformance certification program?

  • A. American Society for Industrial Security
  • B. Automation Federation
  • C. National Institute of Standards and Technology
  • D. Security Compliance Institute
Show answer and explanation ▾

Correct answer: D

The ISA Security Compliance Institute (ISCI) manages the ISASecure conformance certification program, which certifies industrial automation and control products and development processes against the ISA/IEC 62443 standards.

Why the other options are wrong:

  • A. The American Society for Industrial Security does not manage the ISASecure program.
  • B. The Automation Federation does not manage the ISASecure program.
  • C. The National Institute of Standards and Technology does not manage the ISASecure program.

Question 60

Which is a reason for cybersecurity and physical security regulations meeting a mixed resistance?

  • A. Regulations are voluntary documents.
  • B. Regulations contain only informative elements.
  • C. Cybersecurity risks can best be managed individually and in isolation.
  • D. There are a limited number of enforced cybersecurity and physical security regulations.
Show answer and explanation ▾

Correct answer: D

Few cybersecurity and physical security regulations are actually enforced, so many organizations see little pressure to comply and the regulations meet mixed resistance.

Why the other options are wrong:

  • A. Regulations are mandatory requirements, not voluntary documents.
  • B. Regulations contain binding requirements, not only informative elements.
  • C. Cybersecurity risks are not best managed individually and in isolation.

Question 61

After receiving an approved patch from the IACS vendor, what is BEST practice for the asset owner to follow?

  • A. If a low priority, there is no need to apply the patch.
  • B. If a medium priority, schedule the installation within three months after receipt.
  • C. If a high priority, apply the patch at the first unscheduled outage.
  • D. If no problems are experienced with the current IACS, it is not necessary to apply the patch.
Show answer and explanation ▾

Correct answer: B

Once the vendor has approved a patch, the asset owner installs it on a timetable set by its priority. A medium priority patch is scheduled for installation within a defined period after receipt, here three months.

Why the other options are wrong:

  • A. A low priority patch is still applied, on a longer timetable.
  • C. A high priority patch is not left to wait for an unscheduled outage.
  • D. A system running without problems still needs approved patches, because the vulnerability remains.

Question 62

Which policies and procedures publication is titled Patch Management in the IACS Environment?

  • A. ISA-TR62443-2-3
  • B. ISA-TR62443-1-4
  • C. ISA-62443-3-3
  • D. ISA-62443-4-2
Show answer and explanation ▾

Correct answer: A

ISA-TR62443-2-3 is the technical report titled Patch Management in the IACS Environment. It sits in the Policies and Procedures group of the series, which carries the 62443-2 numbering.

Why the other options are wrong:

  • B. ISA-TR62443-1-4 is in the General group and is not the patch management report.
  • C. ISA-62443-3-3 covers system security requirements and security levels.
  • D. ISA-62443-4-2 covers technical security requirements for IACS components.

Question 63

Which analysis method is MOST frequently used as an input to a security risk assessment?

  • A. Failure Mode and Effects Analysis (FMEA)
  • B. Job Safety Analysis (JSA)
  • C. Process Hazard Analysis (PHA)
  • D. System Safety Analysis (SSA)
Show answer and explanation ▾

Correct answer: C

A Process Hazard Analysis already identifies the hazardous scenarios of the process and their consequences, so it is the study most often used to feed a cybersecurity risk assessment. The security team then asks which of those consequences a cyber attack could cause.

Why the other options are wrong:

  • A. FMEA examines how individual components fail and is not the usual starting input for a security risk assessment.
  • B. A Job Safety Analysis covers the hazards of a specific work task, not the process consequences a cyber attack could trigger.
  • D. System Safety Analysis is not the study most often used as the input to an IACS security risk assessment.

Question 64

Which of the following describes the process for classifying data, safeguarding information, and managing documents and dissemination of information?

  • A. Database management
  • B. Information classification ana document management
  • C. Configuration management
  • D. Data integrity
Show answer and explanation ▾

Correct answer: B

Information classification and document management is the part of the CSMS that covers classifying data by sensitivity, safeguarding it, and controlling how documents are stored, retained and distributed.

Why the other options are wrong:

  • A. Database management is the administration of database systems, not the classification and handling of information.
  • C. Configuration management tracks and controls changes to systems and their settings.
  • D. Data integrity is the property that data has not been altered without authorization, not a process for classifying and distributing information.

Question 65

Which of the following provides the overall conceptual basis in the design of an appropriate security program?

  • A. Asset model
  • B. Zone model
  • C. Reference model
  • D. Reference architecture
Show answer and explanation ▾

Correct answer: C

The reference model gives the overall conceptual basis for a security program by describing the generic levels of an industrial automation and control system. The asset model, reference architecture and zone model are then built on top of it.

Why the other options are wrong:

  • A. The asset model describes the assets of a specific operation and builds on the conceptual basis rather than providing it.
  • B. The zone model groups the assets of a reference architecture by security requirements and comes later in the design.
  • D. A reference architecture shows the actual systems and connections of a specific site, not the overall conceptual basis.

Question 66

Within the National Institute of Standards and Technology Cybersecurity Framework v1.0 (NIST CSF), what is the status of the ISA 62443 standards?

  • A. They are used as informative references.
  • B. They are used as normative references.
  • C. They are under consideration for future use.
  • D. They are not used.
Show answer and explanation ▾

Correct answer: A

The NIST Cybersecurity Framework lists existing standards next to each subcategory as informative references, and the ISA 62443 standards appear there. They show one way to achieve the outcome without being mandatory.

Why the other options are wrong:

  • B. The framework does not make the ISA 62443 standards normative, since its references are illustrative and not required.
  • C. The ISA 62443 standards are already cited in the framework, not held for future use.
  • D. The ISA 62443 standards are cited throughout the framework core.

Question 67

How many element groups are in the “Addressing Risk” CSMS category?

  • A. 2
  • B. 3
  • C. 4
  • D. 5
Show answer and explanation ▾

Correct answer: B

The Addressing Risk category of the CSMS contains three element groups: security policy, organization and awareness; selected security countermeasures; and implementation.

Why the other options are wrong:

  • A. Two is not the number of element groups in the Addressing Risk category.
  • C. Four is not the number of element groups in the Addressing Risk category.
  • D. Five is not the number of element groups in the Addressing Risk category.

Question 68

Which of the following is the underlying protocol for Ethernet/IP?

  • A. Building Automation and Control Network (BACnet)
  • B. Common Industrial Protocol (CIP)
  • C. Highway Addressable Remote Transducer (HART)
  • D. Object Linking and Embedding (OLE) for Process Control (OPC)
Show answer and explanation ▾

Correct answer: B

EtherNet/IP carries the Common Industrial Protocol over standard Ethernet and TCP/IP. CIP is the same application layer protocol used by DeviceNet and ControlNet.

Why the other options are wrong:

  • A. BACnet is a building automation protocol and is not the basis of EtherNet/IP.
  • C. HART is a protocol for smart field instruments and is not the basis of EtherNet/IP.
  • D. OPC is a separate data exchange standard and is not the protocol EtherNet/IP is built on.

Question 69

Which of the following is an element of monitoring and improving a CSMS?

  • A. Increase in staff training and security awareness
  • B. Restricted access to the industrial control system to an as-needed basis
  • C. Significant changes in identified risk round in periodic reassessments
  • D. Review of system logs and other key data files
Show answer and explanation ▾

Correct answer: D

Monitoring and improving the CSMS means checking that the program is being followed and is working. Reviewing system logs and other important data files is a direct monitoring activity that shows whether controls are operating as intended.

Why the other options are wrong:

  • A. Staff training and security awareness belongs to the Addressing Risk category of the CSMS.
  • B. Restricting access to an as-needed basis is an access control countermeasure, not a monitoring activity.
  • C. A change in identified risk is a result of the risk analysis, not an activity of monitoring and improving the CSMS.

Question 70

Which of the following PRIMARILY determines access privileges for user accounts?

  • A. Users’ desire for ease of use
  • B. Authorization security policy
  • C. Common practice
  • D. Technical capability
Show answer and explanation ▾

Correct answer: B

Access privileges are set by the authorization security policy, which defines what each role is allowed to do. Accounts are then granted only the privileges that policy assigns to the role.

Why the other options are wrong:

  • A. User convenience does not determine what an account is allowed to do.
  • C. Common practice is not a basis for granting privileges.
  • D. Technical capability limits how privileges can be enforced but does not decide who receives them.

Question 71

What are three possible entry points (pathways) that could be used for launching a cyber attack?

  • A. LAN, portable media, and wireless
  • B. LAN, portable media, and hard drives
  • C. LAN, power source, and wireless
  • D. LAN, WAN, and hard drive
Show answer and explanation ▾

Correct answer: A

An attacker needs a path into the control system. Network connections such as the LAN, portable media such as USB drives, and wireless links are all common ways into an IACS.

Why the other options are wrong:

  • B. An installed hard drive is storage inside a system, not a pathway into it.
  • C. The power source is not a pathway for launching a cyber attack.
  • D. An installed hard drive is storage inside a system, not a pathway into it.

Question 72

Electronic security, as defined in ANSI/ISA-99.00.01:2007, includes which of the following?

  • A. Security guidelines for the proper configuration of IACS computers and operating systems
  • B. Computers, networks, operating systems, applications, and other programmable configurable components of the system
  • C. Personnel, policies, and procedures related to the security of computers, networks, PLCs, and other programmable configurable components of the system
  • D. Security guidelines for the proper configuration of IACS PLCs and other programmable configurable components of the system
Show answer and explanation ▾

Correct answer: B

ANSI/ISA-99.00.01 treats electronic security as the protection of critical systems and information assets, and states that it includes computers, networks, operating systems, applications and other programmable configurable components of the system.

Why the other options are wrong:

  • A. Configuration guidelines for computers and operating systems are not what the definition lists.
  • C. The definition lists technical components of the system, not personnel, policies and procedures.
  • D. Configuration guidelines for PLCs are not what the definition lists.

Question 73

Which of the following tools has the potential for serious disruption of a control network and should not be used on a live system?

  • A. Remote desktop
  • B. Vulnerability scanner
  • C. FTP
  • D. Web browser
Show answer and explanation ▾

Correct answer: B

Vulnerability scanners send large volumes of probing and malformed traffic. Controllers and older control devices can slow down, lock up or fail when scanned, so active scanning belongs on a test system or an offline unit.

Why the other options are wrong:

  • A. Remote desktop is a remote access tool and does not flood devices with probing traffic.
  • C. FTP transfers files and does not carry the same risk of disrupting control devices.
  • D. A web browser does not generate the probing traffic that can upset control devices.

Question 74

What is the FIRST step required in implementing ISO 27001?

  • A. Create a security management organization.
  • B. Define an information security policy.
  • C. Implement strict security controls.
  • D. Perform a security risk assessment.
Show answer and explanation ▾

Correct answer: A

An ISO 27001 program starts with management commitment and a security management organization with defined roles and authority. The policy, risk assessment and controls all depend on that organization being in place.

Why the other options are wrong:

  • B. The information security policy is written by the security management organization, so it is not the first step.
  • C. Controls are selected from the results of the risk assessment, so they come later.
  • D. The risk assessment is carried out after the organization and its scope are established.

Question 75

Which of the following are the critical variables related to access control?

  • A. Reporting and monitoring
  • B. Account management and monitoring
  • C. Account management and password strength
  • D. Password strength and change frequency
Show answer and explanation ▾

Correct answer: C

Access control depends on who holds an account and how well that account is protected. Account management governs creating, changing and removing accounts, and password strength governs how hard the account is to compromise.

Why the other options are wrong:

  • A. Reporting and monitoring observe activity after access is granted and do not control access.
  • B. Monitoring observes activity and is not one of the critical variables of access control.
  • D. This pair leaves out account management, which decides who has access in the first place.

Question 76

What is a commonly used protocol for managing secure data transmission over a Virtual Private Network (VPN)?

  • A. HTTPS
  • B. IPSec
  • C. MPLS
  • D. SSH
Show answer and explanation ▾

Correct answer: B

IPsec is the standard protocol suite for securing VPN traffic. It authenticates and encrypts IP packets at the network layer, so everything sent through the tunnel is protected.

Why the other options are wrong:

  • A. HTTPS secures web traffic between a browser and a server, not a general VPN tunnel.
  • C. MPLS is a label-based forwarding technique and does not encrypt traffic.
  • D. SSH secures remote logins and individual sessions and is not the common VPN protocol.

Question 77

In an IACS system, a typical security conduit consists of which of the following assets?

  • A. Controllers, sensors, transmitters, and final control elements
  • B. Wiring, routers, switches, and network management devices
  • C. Ferrous, thickwall, and threaded conduit including raceways
  • D. Power lines, cabinet enclosures, and protective grounds
Show answer and explanation ▾

Correct answer: B

A conduit is the grouping of communication assets that connects security zones. It is made up of the network itself: wiring, routers, switches and network management devices.

Why the other options are wrong:

  • A. Controllers, sensors, transmitters and final control elements are process control assets that sit inside zones.
  • C. Threaded metal conduit and raceways are electrical hardware, not a security conduit.
  • D. Power lines, enclosures and grounds are electrical infrastructure, not communication assets.

That was 77 of 208.

The full ISA Cybersecurity Fundamentals Specialist pack has all 208 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack

Not ready yet? Get the first 79 free as one PDF by email. Get the Half Pack →

About the IC32 exam

These 77 ISA Cybersecurity Fundamentals Specialist questions are free here. The free PDF has 79, free by email.

They are drawn from the same bank as the full IC32 pack, which has 208 questions in total.

Back to blog