IBM C1000-200 Practice Questions with Explanations
Free IBM C1000-200 practice questions. 17 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
C1000-200 practice questions
Question 1
Which queue receives queue manager statistics by default?
- A. SYSTEM.MONITOR.STATS
- B. SYSTEM.DEFAULT.STAT.QUEUE
- C. SYSTEM.ADMIN.STATISTICS.QUEUE
- D. SYSTEM.STATS.QUEUE
Show answer and explanation ▾
Correct answer: C
Queue manager statistics messages go to SYSTEM.ADMIN.STATISTICS.QUEUE by default, where tools or applications can read them.
Why the other options are wrong:
- A. SYSTEM.MONITOR.STATS is not the default statistics queue.
- B. SYSTEM.DEFAULT.STAT.QUEUE is not the default statistics queue.
- D. SYSTEM.STATS.QUEUE is not a default system queue for statistics.
Question 2
What happens while troubleshooting and accessing container-logs in its default behavior?
- A. The logs are always written in EDT time
- B. The logs get deleted when a pod restarts or crashes
- C. The log format changes after restarting a container
- D. The logs are encrypted with an RSA algorithm
Show answer and explanation ▾
Correct answer: B
Container logs are tied to the pod or container, so by default they are lost when the pod restarts or crashes unless logging is sent somewhere persistent.
Why the other options are wrong:
- A. Log time zone is not fixed to EDT by default.
- C. The log format does not change when a container restarts.
- D. Container logs are not encrypted with RSA by default.
Question 3
Which is a valid use case for using MQIPT?
- A. As a schema for validating incoming messages
- B. For mediation of MQ messages
- C. For JMS message transformation
- D. As a channel concentrator
Show answer and explanation ▾
Correct answer: D
MQIPT is a proxy that can accept many inbound connections and pass them through fewer network paths, which makes it useful as a channel concentrator.
Why the other options are wrong:
- A. MQIPT does not validate message schemas.
- B. MQIPT moves connections; it does not mediate message content.
- C. MQIPT does not transform JMS messages.
Question 4
Which utility can be used to view performance PCF messages?
- A. amqsevt
- B. amqsget
- C. amqsins
- D. amqsbcg
Show answer and explanation ▾
Correct answer: A
The amqsevt sample reads event messages, including PCF performance events, and prints them in readable form.
Why the other options are wrong:
- B. amqsget reads messages from a queue but does not format them as event data.
- C. amqsins is not the utility for viewing performance PCF messages.
- D. amqsbcg browses a queue and shows message descriptors, not formatted performance events.
Question 5
Which is a function of the migmqlog command?
- A. It changes logs from their current location to a new location
- B. It changes the size of the primary and secondary log file pages
- C. It changes used log file extents to reusable log file extents
- D. It changes the size of the primary and secondary log files
Show answer and explanation ▾
Correct answer: A
The migmqlog command migrates queue manager logs. It can also switch the log type between linear and circular, and its -ld parameter names a new location to move the migrated log files to.
Why the other options are wrong:
- B. Changing the log file page size is not a function of migmqlog.
- C. Converting used log extents to reusable extents is not a function of migmqlog.
- D. Changing the size of the primary and secondary log files is not a function of migmqlog.
Question 6
Which statement describes AUTHENTICATION?
- A. The process of verifying presented identities
- B. The process of trusting presented identities
- C. The process of authorizing presented identities
- D. The process of approving presented identities
Show answer and explanation ▾
Correct answer: A
Authentication is the ability to prove that a user or application really is who or what it claims to be, so it is the process of verifying a presented identity, for example by validating the user ID and password an application supplies when it connects.
Why the other options are wrong:
- B. Trusting an identity without proof is not authentication.
- C. Deciding what an identity may access is authorization, not authentication.
- D. Approving an identity is not the act of proving it is genuine.
Question 7
What is the primary role of the queue manager with respect to the BackoutThreshold attribute?
- A. Sets a threshold for the maximum number of messages on a queue
- B. Stores the threshold for application-based backout handling
- C. Controls a threshold for message processing frequency
- D. Defines a threshold to trigger message processing
Show answer and explanation ▾
Correct answer: B
Apart from allowing its value to be queried, the queue manager takes no action based on BackoutThreshold. It holds the value so that applications, such as those using the Application Server Facilities, can decide whether a message should be backed out.
Why the other options are wrong:
- A. BackoutThreshold does not limit the number of messages on a queue.
- C. BackoutThreshold does not control how often messages are processed.
- D. BackoutThreshold is not a trigger for starting message processing.
Question 8
What is the requirement for the expiry (exp) claim in authentication tokens?
- A. The priority value is in integer range of 0-4
- B. The priority value is in integer range of 5-10
- C. The value must be later than the current time
- D. The value must be equal to the current time
Show answer and explanation ▾
Correct answer: C
For an authentication token to be accepted, the value of its expiry (exp) claim must be later than the current time, and the token is not accepted after that time.
Why the other options are wrong:
- A. The exp claim is a time, not a priority value.
- B. The exp claim is a time, not a priority value.
- D. The exp value must be later than the current time, not equal to it.
Question 9
Which queue property can be used to define whether multiple applications can open the queue for input simultaneously?
- A. SCOPE
- B. SHARE
- C. USAGE
- D. DEFPST
Show answer and explanation ▾
Correct answer: B
The SHARE and NOSHARE parameters on local and model queues specify whether multiple applications can get messages from the queue. SHARE lets more than one application instance open it for input, and NOSHARE allows only one.
Why the other options are wrong:
- A. SCOPE does not control shared input access to a queue.
- C. USAGE does not control shared input access to a queue.
- D. Default persistence does not control shared input access to a queue.
Question 10
Which two (2) capabilities are provided by a uniform cluster where all cluster members are configured identically? (Choose two.)
- A. Performance monitoring
- B. Workload balancing
- C. Configuration policing
- D. Automatic replication
- E. Better availability
Show answer and explanation ▾
Correct answer: B, E
In a uniform cluster, applications can connect to any of the identically configured queue managers. This removes the dependency on a specific queue manager, giving better availability and workload balancing of messaging traffic.
Why the other options are wrong:
- A. Performance monitoring is not a capability that a uniform cluster provides.
- C. Configuration policing is not a capability that a uniform cluster provides.
- D. A uniform cluster does not provide automatic replication of messages.
Question 11
When configuring Advanced Message Security (AMS), where does IBM MQ primarily look for the keystore.conf file by default?
- A. Within a hidden .mqs subdirectory in the current Application user’s home directory
- B. Inside the designated data directory specifically associated with the queue manager
- C. Within the /etc/mqm directory on Linux and AIX systems
- D. In a conf subdirectory located inside the main IBM MQ installation directory
Show answer and explanation ▾
Correct answer: A
By default AMS looks for keystore.conf in a .mqs directory under the user's home directory: $HOME/.mqs/keystore.conf on AIX and Linux. A different location can be set with the MQS_KEYSTORE_CONF environment variable.
Why the other options are wrong:
- B. The default location is in the user's home directory, not the queue manager data directory.
- C. The default location is in the user's home directory, not /etc/mqm.
- D. The default location is in the user's home directory, not the installation directory.
Question 12
Which statement describes the IBM MQ Advanced for Developers container image?
- A. It requires a download key
- B. It runs only on x86
- C. Red Hat OpenShift Local is mandatory
- D. The image is non-warranted
Show answer and explanation ▾
Correct answer: D
The IBM MQ Advanced for Developers container is a free download that is non-warranted and not supported. It is available for amd64, s390x and ppc64le platforms.
Why the other options are wrong:
- A. It is offered as a free download from the IBM Container Registry.
- B. It is also available on s390x and ppc64le, not only amd64.
- C. It can run in container runtimes such as containerd, cri-o, Podman or Docker, so Red Hat OpenShift Local is not mandatory.
Question 13
What are benefits of setting SHARECNV to 1 or greater on an IBM MQ SVRCONN channel?
- A. Optimized memory buffers and bi-directional heartbeats
- B. Increased socket usage on the server and increased channel instances on the server
- C. Bi-directional heartbeats and asynchronous-consumption by client applications
- D. Write ahead and synchronous-consumption by client applications
Show answer and explanation ▾
Correct answer: C
For all SHARECNV values of 1 or greater, an SVRCONN channel supports bi-directional heartbeats, administrator stop-quiesce, read-ahead and asynchronous consume by client applications.
Why the other options are wrong:
- A. Optimized memory buffers are not among the features enabled by SHARECNV of 1 or greater.
- B. More sockets and channel instances are not benefits of SHARECNV of 1 or greater.
- D. The features are read-ahead and asynchronous consume, not write ahead and synchronous consume.
Question 14
Which object must be defined on the source queue manager for a local SENDER channel to send messages to a remote RECEIVER channel?
- A. Transmission queue
- B. Target queue
- C. Alias queue
- D. Clustered alias queue
Show answer and explanation ▾
Correct answer: A
Without clustering, a queue manager that sends messages to another must have a transmission queue and a channel to the remote queue manager defined. The sender channel takes messages from its transmission queue and sends them to the receiver.
Why the other options are wrong:
- B. The target queue is defined on the remote queue manager, not on the source.
- C. An alias queue is not required for a sender channel to send messages.
- D. A clustered alias queue is not required for a sender channel to send messages.
Question 15
How does IBM MQ determine which queue manager to use when routing messages in a cluster?
- A. By cloning the partial repositories
- B. By using the cluster workload management algorithm
- C. By using the cluster sender and receiver channels
- D. By connecting to a secondary defined cluster
Show answer and explanation ▾
Correct answer: B
When more than one queue manager in a cluster hosts an instance of the target queue, IBM MQ uses its cluster workload management algorithm to decide which queue manager handles the message, spreading the workload across them.
Why the other options are wrong:
- A. Partial repositories hold cluster information; they are not cloned to choose a destination.
- C. Cluster channels carry messages but do not decide which queue manager receives them.
- D. Connecting to a secondary cluster is not how IBM MQ chooses a destination queue manager.
Question 16
Which file contains JVM settings for the MQXR service and is located in the same directory as the telemetry configuration files?
- A. trace.config
- B. java.properties
- C. service.env
- D. jvm.properties
Show answer and explanation ▾
Correct answer: B
The java.properties file in the MQ Telemetry service configuration directory holds the JVM settings for the telemetry (MQXR) service, such as the -Xms and -Xmx heap options and other JVM arguments.
Why the other options are wrong:
- A. trace.config is not the file that holds JVM settings for the MQXR service.
- C. service.env is not the file that holds JVM settings for the MQXR service.
- D. jvm.properties is not the file that holds JVM settings for the MQXR service.
Question 17
Which channel authentication record type prevents a specified user or users from connecting?
- A. BLOCKADDR
- B. ADDRESSMAP
- C. SSLPEERMAP
- D. BLOCKUSER
Show answer and explanation ▾
Correct answer: D
To prevent certain user IDs from connecting over a client channel, a channel authentication record of type BLOCKUSER is set. It lists one or more individual user IDs to block and applies only to client channels.
Why the other options are wrong:
- A. BLOCKADDR blocks IP addresses, not user IDs.
- B. ADDRESSMAP records match IP addresses, not a list of blocked user IDs.
- C. SSLPEERMAP matches TLS Distinguished Names, not a list of blocked user IDs.
That was 17 of 64.
The full IBM C1000-200 pack has all 64 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 17 free as one PDF by email. Get the Half Pack →
About the C1000-200 exam
These 17 IBM C1000-200 questions are free here, and as a free PDF by email.
They are drawn from the same bank as the full C1000-200 pack, which has 64 questions in total.