IASSC ICYB Practice Questions with Explanations

Free IASSC ICYB practice questions. 47 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.

ICYB practice questions

Question 1

When a process has proven itself to function at a Six Sigma level this means there are less than ________ defects per million opportunities.

  • A. 1.7
  • B. 2.6
  • C. 3.4
  • D. 10
Show answer and explanation ▾

Correct answer: C

A process at the Six Sigma level has fewer than 3.4 defects per million opportunities.

Why the other options are wrong:

  • A. 1.7 is not the Six Sigma defect rate.
  • B. 2.6 is not the Six Sigma defect rate.
  • D. 10 per million is a looser rate than Six Sigma.

Question 2

Six Sigma refers to a process whose output has at least 95% of its data points within 6 Standard Deviations from the Mean.

  • A. True
  • B. False
Show answer and explanation ▾

Correct answer: B

The statement is false. Six Sigma means the process mean is six standard deviations from the nearest limit, which corresponds to 3.4 defects per million, not a 95% share.

Why the other options are wrong:

  • A. True would equate Six Sigma with 95% coverage, which is far looser than the real standard.

Question 3

Training cost is $3,000 and a project required an initial investment of $12,000. If the project yields monthly savings of $1,800 beginning after 3 months, what is the payback period in months (before money costs and taxes)?

  • A. 4.17
  • B. 8.33
  • C. 11.33
  • D. 28.28
Show answer and explanation ▾

Correct answer: C

Total outlay is 3,000 plus 12,000, which is 15,000. Savings of 1,800 a month take 15,000 / 1,800 = 8.33 months, and they start after 3 months, so 11.33 months.

Why the other options are wrong:

  • A. 4.17 divides only part of the cost and ignores the 3 month delay.
  • B. 8.33 is the payback time after savings begin, it leaves out the 3 month delay.
  • D. 28.28 does not follow from the figures given.

Question 4

The ROI for a project is a measurement metric that stands for Return on Investment and is one of the methods used to measure the success of a Lean Six Sigma project.

  • A. True
  • B. False
Show answer and explanation ▾

Correct answer: A

ROI stands for Return on Investment and is a standard way to measure whether a Lean Six Sigma project paid off.

Why the other options are wrong:

  • B. False would deny that ROI is a measure of project success, which it is.

Question 5

The DMAIC approach to problem solving stands for Define, __________, Analyze, Improve and Control.

  • A. Manage
  • B. Measure
  • C. Memorize
  • D. Manipulate
Show answer and explanation ▾

Correct answer: B

DMAIC stands for Define, Measure, Analyze, Improve and Control.

Why the other options are wrong:

  • A. Manage is not a DMAIC phase.
  • C. Memorize is not a DMAIC phase.
  • D. Manipulate is not a DMAIC phase.

Question 6

Voice of the Customer is a Lean Six Sigma technique to determine the ___________ attributes of a product or service.

  • A. Desirable
  • B. Beneficial
  • C. Critical-to-Quality
  • D. Preferred
Show answer and explanation ▾

Correct answer: C

Voice of the Customer work captures what customers need and translates those needs into Critical-to-Quality attributes, the measurable characteristics a product or service must meet to satisfy the customer.

Why the other options are wrong:

  • A. Desirable attributes is not the Lean Six Sigma term for the customer requirements that Voice of the Customer defines.
  • B. Beneficial attributes is not the term used for the measurable requirements derived from customer needs.
  • D. Preferred attributes is not the term used; customer needs are translated into Critical-to-Quality characteristics.

Question 7

Benefits and working conditions would be primarily the concern of which of the following?

  • A. Voice of the Customer
  • B. Voice of the Employee
  • C. Voice of the Business
  • D. Voice of the Process
Show answer and explanation ▾

Correct answer: B

Benefits and working conditions are needs of the people who work in the organization, so they belong to the Voice of the Employee.

Why the other options are wrong:

  • A. Voice of the Customer covers the needs of those who receive the product or service, not staff benefits.
  • C. Voice of the Business covers the financial and strategic needs of the organization, such as profit and growth.
  • D. Voice of the Process describes how the process actually performs, shown by its data.

Question 8

In the expression Y = f(Xn) Y, the output, is the ___________ variable and Xn, the inputs, are the __________ variables.

  • A. Independent, dependent
  • B. Individual, multiple
  • C. Sole, multiple
  • D. Dependent, independent
Show answer and explanation ▾

Correct answer: D

In Y = f(Xn) the output Y depends on the inputs, so Y is the dependent variable. The inputs Xn can be set or changed on their own, so they are the independent variables.

Why the other options are wrong:

  • A. This reverses the roles: the output depends on the inputs, not the other way around.
  • B. Individual and multiple are not the statistical terms for the output and input variables.
  • C. Sole and multiple are not the statistical terms for the output and input variables.

Question 9

When we assess the Voice of the Customer we are attempting to determine the gaps in our processes between "what is" and __________________.

  • A. "What isn’t"
  • B. "What will make money"
  • C. "What will cost less"
  • D. "What should be"
Show answer and explanation ▾

Correct answer: D

Voice of the Customer compares current process performance, what is, with what the customer requires, what should be. The gap between the two shows where improvement is needed.

Why the other options are wrong:

  • A. "What isn't" does not describe the customer requirement that current performance is compared against.
  • B. Making money is a business concern, not the customer standard used to find process gaps.
  • C. Costing less is a business concern, not the customer standard used to find process gaps.

Question 10

Which of the following would likely not be a CTQ (Critical-to-Quality) for the purchase of a product?

  • A. Functionality
  • B. Durability
  • C. Dependability
  • D. None
Show answer and explanation ▾

Correct answer: D

Functionality, durability and dependability are all characteristics a buyer expects from a product, so each of them can be a Critical-to-Quality requirement. None of the three would be excluded.

Why the other options are wrong:

  • A. Functionality is a common CTQ, since the buyer expects the product to do what it is meant to do.
  • B. Durability is a common CTQ, since the buyer expects the product to last.
  • C. Dependability is a common CTQ, since the buyer expects the product to work reliably.

Question 11

The Pareto Chart is a tool that displays data that typically follows what ratio?

  • A. 70:30
  • B. 80:20
  • C. 90:10
  • D. 95:5
Show answer and explanation ▾

Correct answer: B

The Pareto Chart is based on the Pareto Principle, also called the 80:20 rule: roughly 80 percent of the effects come from about 20 percent of the causes.

Why the other options are wrong:

  • A. 70:30 is not the ratio named by the Pareto Principle.
  • C. 90:10 is not the ratio named by the Pareto Principle.
  • D. 95:5 is not the ratio named by the Pareto Principle.

Question 12

Al bought a handheld GPS from his local electronics store.

When he entered an address it would not function. For the manufacturer of the GPS this would be categorized as what type of cost?

  • A. Internal Failure Cost
  • B. Prevention Cost
  • C. External Failure Cost
  • D. Appraisal Cost
Show answer and explanation ▾

Correct answer: C

The defect was found by the customer after the product was sold, which makes it an External Failure Cost. These costs include returns, warranty claims and lost goodwill.

Why the other options are wrong:

  • A. Internal Failure Costs come from defects found before the product reaches the customer, such as scrap and rework.
  • B. Prevention Costs are spent to stop defects from happening, such as training and process planning.
  • D. Appraisal Costs are spent on inspecting and testing to find defects before shipment.

Question 13

Which of the following is a method of expressing the concept that the outputs of a process are a function of all the inputs to the process?

  • A. Y = f(Xn)
  • B. RTY > 90%
  • C. Yield = Effort
  • D. Flow = Demand
Show answer and explanation ▾

Correct answer: A

Y = f(Xn) states that the output Y of a process is a function of its inputs, the Xs. It is the basic Six Sigma expression linking process results to their causes.

Why the other options are wrong:

  • B. RTY > 90% is a statement about Rolled Throughput Yield, not the relationship between inputs and outputs.
  • C. Yield = Effort is not a Six Sigma expression for the input and output relationship.
  • D. Flow = Demand does not express outputs as a function of the process inputs.

Question 14

When we create a Process Map and want to depict an action step in the process we would use the ____________ symbol.

  • A. Diamond
  • B. Circle
  • C. Ellipse
  • D. Rectangle
Show answer and explanation ▾

Correct answer: D

On a Process Map a rectangle represents an action or task step, the standard symbol for work being done in the process.

Why the other options are wrong:

  • A. A diamond marks a decision point, where the flow branches on a yes or no question.
  • B. A circle is not the standard symbol for an action step.
  • C. An ellipse marks the start or end of the process, not an action step.

Question 15

A Belt has determined that the loan application does not need to be reviewed by accounting thereby improving the number of applications a loan processer can handle. According to Cost of Poor Quality (COPQ) definitions RTY improvement would be considered _______________.

  • A. Downsizing savings
  • B. Hard savings
  • C. Soft savings
  • D. Median savings
Show answer and explanation ▾

Correct answer: B

An improvement in Rolled Throughput Yield means more work passes through the process right the first time, which lowers measurable costs of poor quality such as rework. Savings that can be measured in financial terms are hard savings.

Why the other options are wrong:

  • A. Downsizing savings is not a category of project savings, and no jobs are being cut here.
  • C. Soft savings are benefits that cannot be measured directly in financial terms, such as improved morale.
  • D. Median savings is not a category of project savings.

Question 16

The following Business Case is constructed properly.

"During most of 2008 Division 16 experienced a 4.2% product return rate versus a target of nearly no returns. This costs the company a whole bunch of money.

  • A. True
  • B. False
Show answer and explanation ▾

Correct answer: B

A proper Business Case states the financial impact in specific, measurable terms. "A whole bunch of money" and "nearly no returns" are vague, so this Business Case is not constructed properly.

Why the other options are wrong:

  • A. The statement gives no quantified cost and no specific target, so it does not meet the standard for a Business Case.

Question 17

The essence of Lean is to concentrate effort on ____________________ while improving process flow to achieve speed and agility at lower cost.

  • A. Defect removal
  • B. Removing waste
  • C. Overtime reduction
  • D. Rework reduction
Show answer and explanation ▾

Correct answer: B

Lean focuses on identifying and removing waste, meaning any activity that adds no value for the customer, so that work flows faster and at lower cost.

Why the other options are wrong:

  • A. Defect removal is the main focus of Six Sigma and covers only one type of waste.
  • C. Overtime reduction can be a result of Lean but is not its central focus.
  • D. Rework reduction addresses only one form of waste, not the full scope of Lean.

Question 18

As a Belt created a Process Map he realized there were multiple departments involved in this process so he added a feature to the map called ______________.

  • A. Passing Lanes
  • B. Swim Lanes
  • C. Department Dividers
  • D. Responsibility Paths
Show answer and explanation ▾

Correct answer: B

Swim Lanes divide a Process Map into rows or columns, one per department or role, so it is clear who performs each step and where handoffs occur.

Why the other options are wrong:

  • A. Passing Lanes is not a Process Map feature.
  • C. Department Dividers is not the name of the Process Map feature that separates responsibilities.
  • D. Responsibility Paths is not the name of the Process Map feature that separates responsibilities.

Question 19

As we conceive and define a LSS project one of the overriding things we hope to accomplish is to reduce the _____________________.

  • A. Work force
  • B. Number of process steps
  • C. Inventory
  • D. Cost of Poor Quality
Show answer and explanation ▾

Correct answer: D

Lean Six Sigma projects are selected and defined to reduce the Cost of Poor Quality, the cost of defects, rework, scrap and other failures that would not exist if the process worked right the first time.

Why the other options are wrong:

  • A. Reducing the work force is not the purpose of a Lean Six Sigma project.
  • B. Fewer process steps may result from a project but is not the overriding goal.
  • C. Lower inventory may result from a project but is not the overriding goal.

Question 20

The Value Chain in an organization is the sum total of all the processes which occur in the business to take inputs and turn them into customer desired outputs.

  • A. True
  • B. False
Show answer and explanation ▾

Correct answer: A

The Value Chain is the full set of processes a business performs to turn inputs into the outputs its customers want, so the statement is true.

Why the other options are wrong:

  • B. The statement matches the definition of the Value Chain, so it is not false.

Question 21

A key metric in Six Sigma is the DPMO which stands for __________________?

  • A. Delayed production metrics output
  • B. Defects by management oversight
  • C. Defects per million opportunities
  • D. Developed production management oversight
Show answer and explanation ▾

Correct answer: C

DPMO stands for Defects per Million Opportunities. It expresses the number of defects relative to the total chances for a defect, scaled to one million.

Why the other options are wrong:

  • A. Delayed production metrics output is not what DPMO stands for.
  • B. Defects by management oversight is not what DPMO stands for.
  • D. Developed production management oversight is not what DPMO stands for.

Question 22

Cycle Time, Defects, Scrap Cost and Safety are examples of business metrics or commonly referred to as which of the following?

  • A. Defects per Unit
  • B. Key Performance Indicators
  • C. Impediments to Flow
  • D. Hidden Costs
Show answer and explanation ▾

Correct answer: B

Cycle Time, Defects, Scrap Cost and Safety are measures a business tracks to judge how well it is performing, which are known as Key Performance Indicators.

Why the other options are wrong:

  • A. Defects per Unit is a single quality metric, not the general name for business metrics.
  • C. Impediments to Flow describes obstacles in a process, not business metrics.
  • D. Hidden Costs describes unseen costs of poor quality, not the general name for business metrics.

Question 23

To construct a Fishbone Diagram and capture all the issues of interest it is best if your team uses the ________________ approach.

  • A. Graphical
  • B. Data collection
  • C. Shewhart
  • D. Brainstorming
Show answer and explanation ▾

Correct answer: D

A Fishbone Diagram is built by the team brainstorming possible causes under each category, which brings out the widest range of ideas from the people who know the process.

Why the other options are wrong:

  • A. Graphical describes how the diagram looks, not the approach the team uses to generate causes.
  • B. Data collection comes later, to verify the causes the team has listed.
  • C. Shewhart is associated with control charts, not with building a Fishbone Diagram.

Question 24

A 5

Why Analysis is used to help identify possible defect causes when which one of the below listed tools is created?

  • A. Fishbone Diagram
  • B. SIPOC
  • C. X-Y Matrix
  • D. Pareto Chart
Show answer and explanation ▾

Correct answer: A

A 5 Why Analysis asks why repeatedly to drill down from a problem to its possible root causes, and it is used while building a Fishbone Diagram to fill in the causes on each branch.

Why the other options are wrong:

  • B. A SIPOC gives a high level view of suppliers, inputs, process, outputs and customers, not defect causes.
  • C. An X-Y Matrix ranks inputs against outputs and does not use the 5 Why technique.
  • D. A Pareto Chart ranks categories by frequency and does not use the 5 Why technique.

Question 25

The purpose of a Process Map is to identify the complexity of the process and to assist in identifying ______________ in the process.

  • A. Critical steps
  • B. Line operators
  • C. Test stations
  • D. Defects
Show answer and explanation ▾

Correct answer: A

A Process Map lays out every step of the process, which shows how complex it is and helps the team identify the critical steps that most affect the output.

Why the other options are wrong:

  • B. Identifying line operators is not the purpose of a Process Map.
  • C. Identifying test stations is not the purpose of a Process Map.
  • D. A Process Map shows steps and flow; defects are identified with data and other tools.

Question 26

At the start of a project we are told to "walk the process" from beginning to the end. We do this to_____________________.

  • A. Meet the workers
  • B. Draft a Process Map
  • C. See what inventory is involved
  • D. Check the repair stations
Show answer and explanation ▾

Correct answer: B

Walking the process from beginning to end lets the team see what actually happens at each step, which is the basis for drafting an accurate Process Map.

Why the other options are wrong:

  • A. Meeting the workers may happen along the way but is not the reason for walking the process.
  • C. Seeing inventory is not the main purpose of walking the process.
  • D. Checking repair stations is not the main purpose of walking the process.

Question 27

The "Method" category of Root Causes on a Fishbone Diagram is primarily used to generate ideas as to the possible causes for defects by the ____________.

  • A. Inventory management
  • B. Effects of the environment
  • C. Way work is done
  • D. Parts or forms used
Show answer and explanation ▾

Correct answer: C

The Method category on a Fishbone Diagram covers the procedures and techniques used, so it prompts ideas about causes that come from the way work is done.

Why the other options are wrong:

  • A. Inventory management is not what the Method category covers.
  • B. Effects of the environment belong to the Environment category, sometimes called Mother Nature.
  • D. Parts or forms used belong to the Material category.

Question 28

When we create a Process Map we use a __________ to show the direction of work flow.

  • A. Solid line arrow
  • B. Dashed line arrow
  • C. Series of dots
  • D. Double lines
Show answer and explanation ▾

Correct answer: A

A solid line arrow connects the symbols on a Process Map and shows the direction in which the work flows from one step to the next.

Why the other options are wrong:

  • B. A dashed line arrow is not the standard symbol for the direction of work flow.
  • C. A series of dots is not used to show the direction of work flow.
  • D. Double lines are not used to show the direction of work flow.

Question 29

At the beginning of a project we must keep in mind there are basically three views of a process: What you THINK it is,

What it ACTUALLY is and What is DOCUMENTED.

  • A. True
  • B. False
Show answer and explanation ▾

Correct answer: B

The three views of a process are what you think it is, what it actually is and what it should be. The statement replaces the third view with what is documented, so it is false.

Why the other options are wrong:

  • A. The third view is what the process should be, not what is documented, so the statement is not true.

Question 30

One of the primary deliverables from performing a SIPOC is to begin to understand which inputs have the greatest affect on the ____________ most valued outputs.

  • A. Business’s
  • B. Employee’s
  • C. Management’s
  • D. Customer’s
Show answer and explanation ▾

Correct answer: D

A SIPOC links suppliers and inputs through the process to the outputs and the customers who receive them, so it helps show which inputs most affect the outputs the customer values most.

Why the other options are wrong:

  • A. A SIPOC ends with the customer, and the outputs are judged by what the customer values, not the business.
  • B. The outputs in a SIPOC are judged by what the customer values, not the employee.
  • C. The outputs in a SIPOC are judged by what the customer values, not management.

Question 31

A Macro Process Map may map a process showing the entire activities of a department and can likely be broken into many Micro Process Maps showing numerous processes that comprise the activities of the department.

  • A. True
  • B. False
Show answer and explanation ▾

Correct answer: A

A Macro Process Map shows a process at a high level, such as all the activities of a department, and each of its steps can be broken down into more detailed Micro Process Maps.

Why the other options are wrong:

  • B. The statement correctly describes how Macro and Micro Process Maps relate, so it is not false.

Question 32

SIPOC stands for Suppliers, Inputs, ___________ , Output and Customers.

  • A. Production
  • B. Process
  • C. Products
  • D. Presentation
Show answer and explanation ▾

Correct answer: B

SIPOC stands for Suppliers, Inputs, Process, Outputs and Customers. The P is the process that turns the inputs into outputs.

Why the other options are wrong:

  • A. Production is not the word the P in SIPOC stands for.
  • C. Products is not the word the P in SIPOC stands for.
  • D. Presentation is not the word the P in SIPOC stands for.

Question 33

As we begin to describe the things occurring with our process through a Process Map we begin to see some steps that are NVA which stands for ____________.

  • A. Non-value add
  • B. No violation allowed
  • C. Non-value actions
  • D. Next vehicle action
Show answer and explanation ▾

Correct answer: A

NVA stands for non-value add. It describes process steps that consume time or resources without adding anything the customer is willing to pay for.

Why the other options are wrong:

  • B. No violation allowed is not what NVA stands for.
  • C. Non-value actions is not the Lean Six Sigma term that NVA stands for.
  • D. Next vehicle action is not what NVA stands for.

Question 34

As we identify customer and supplier requirements for a SIPOC we are urged to use the RUMBA approach which stands for Reasonable, Understandable, _____________, Believable and Achievable.

  • A. Manageable
  • B. Massive
  • C. Memorable
  • D. Measurable
Show answer and explanation ▾

Correct answer: D

RUMBA stands for Reasonable, Understandable, Measurable, Believable and Achievable. A requirement must be measurable so the team can tell whether it has been met.

Why the other options are wrong:

  • A. Manageable is not the word the M in RUMBA stands for.
  • B. Massive is not the word the M in RUMBA stands for.
  • C. Memorable is not the word the M in RUMBA stands for.

Question 35

Inputs that may affect your process to some degree but are not critical, are difficult to quantify and are random in nature are referred to as ___________.

  • A. Nuisance
  • B. Noise
  • C. Pests
  • D. Elusive
Show answer and explanation ▾

Correct answer: B

Noise inputs are the random, hard to control and hard to quantify factors that affect a process to some degree without being critical to it.

Why the other options are wrong:

  • A. Nuisance is not the term used to classify these process inputs.
  • C. Pests is not a term used to classify process inputs.
  • D. Elusive is not a term used to classify process inputs.

Question 36

Long-term Data represents all the variation that one can expect to experience from the output of the subject process.

  • A. True
  • B. False
Show answer and explanation ▾

Correct answer: A

Long-term data is collected over a period long enough to include every source of variation the process experiences, such as different shifts, operators, materials and conditions, so the statement is true.

Why the other options are wrong:

  • B. Long-term data does capture the full variation expected from the process, so the statement is not false.

Question 37

The temperature of a liquid is being measured by a line operator.

Which is least likely to be influenced by the instrument?

  • A. Recording the measurement
  • B. Actual temperature of the liquid
  • C. Calibration of the instrument
  • D. Reading of the instrument
Show answer and explanation ▾

Correct answer: A

Recording the measurement is done by the operator after the reading is taken, so it depends on the person writing down the value and not on the instrument itself.

Why the other options are wrong:

  • B. Placing an instrument in the liquid can affect the liquid being measured, so this is not the least influenced.
  • C. Calibration is a property of the instrument itself.
  • D. The reading comes directly from the instrument, so it depends on the instrument.

Question 38

One of the primary benefits of your team working together to create an X-Y Diagram is that the data collected from this exercise is accurate and certain.

  • A. True
  • B. False
Show answer and explanation ▾

Correct answer: B

An X-Y Diagram is built from the team's opinions and ratings, not from measured data. Its results are subjective and need to be confirmed with data, so the statement is false.

Why the other options are wrong:

  • A. The scores in an X-Y Diagram reflect team judgment, so they are not accurate and certain data.

Question 39

Measurement System Analysis is a procedure used to quantify variation of the method or system used for taking measurements and used to assure usable data is collected.

  • A. True
  • B. False
Show answer and explanation ▾

Correct answer: A

Measurement System Analysis quantifies how much of the observed variation comes from the measurement method or system itself, which confirms that the data collected can be trusted and used.

Why the other options are wrong:

  • B. The statement correctly describes Measurement System Analysis, so it is not false.

Question 40

A Belt gathered the following defect data for a trouser production line and wanted to assemble it into a Pareto Chart. The correct order from left to right in the chart would be: Data:Cutting29 Forming43 Stitching17 Sealing51 -

  • A. Sealing, Forming, Cutting, Stitching
  • B. Cutting, Stitching, Sealing, Forming
  • C. Stitching, Forming, Cutting, Sealing
  • D. Forming, Cutting, Sealing, Stitching
Show answer and explanation ▾

Correct answer: A

A Pareto Chart orders categories from the highest count on the left to the lowest on the right: Sealing 51, Forming 43, Cutting 29, Stitching 17.

Why the other options are wrong:

  • B. This order does not run from the highest defect count to the lowest.
  • C. This order starts with Stitching, the lowest count, which belongs on the far right.
  • D. This order places Forming first, but Sealing has the highest count.

Question 41

One of the primary objectives of constructing an X-Y Diagram is to separate the vital few X’s from the trivial many X’s.

  • A. True
  • B. False
Show answer and explanation ▾

Correct answer: A

An X-Y Diagram scores each input against the outputs that matter to the customer, which narrows a long list of inputs down to the vital few that deserve further study.

Why the other options are wrong:

  • B. Separating the vital few inputs from the trivial many is a main purpose of the X-Y Diagram, so the statement is not false.

Question 42

If a set of data is generally centered relative to the targeted value but is rather widely disbursed it would be said to be _____________.

  • A. Precise but not accurate
  • B. Accurate but not precise
  • C. Precise but skewed
  • D. Accurate but distributed
Show answer and explanation ▾

Correct answer: B

Accuracy describes how close the center of the data is to the target, and precision describes how tightly the data is grouped. Data centered on the target but widely spread is accurate but not precise.

Why the other options are wrong:

  • A. Precise but not accurate describes data that is tightly grouped but off target.
  • C. The data is widely spread, so it is not precise.
  • D. Accurate but distributed is not a term used to describe measurement data.

Question 43

Stability, Bias and Linearity define the ___________ of a Measurement System.

  • A. Sensitivity
  • B. Repeatability
  • C. Accuracy
  • D. Precision
Show answer and explanation ▾

Correct answer: C

Accuracy describes how close measurements are to the true value, and in Measurement System Analysis it is assessed through bias, linearity and stability.

Why the other options are wrong:

  • A. Sensitivity is not the property defined by stability, bias and linearity.
  • B. Repeatability is a component of precision, the variation when one operator repeats a measurement.
  • D. Precision is defined by repeatability and reproducibility, not by stability, bias and linearity.

Question 44

A tool we use to identify possible failures (defects) in our process and the impact they may have is the _________________.

  • A. Shewhart Analysis
  • B. Juran Journey
  • C. FMEA
  • D. SIPOC
Show answer and explanation ▾

Correct answer: C

FMEA, Failure Modes and Effects Analysis, lists the ways a process can fail, the effects of each failure and how serious they are, so that risks can be prioritized.

Why the other options are wrong:

  • A. Shewhart Analysis is not the tool used to list possible failures and their impact.
  • B. Juran Journey is not the tool used to list possible failures and their impact.
  • D. A SIPOC gives a high level view of a process, not an analysis of its possible failures.

Question 45

The RPN or Risk Priority Number is used to rank the various Failure Modes as to their impact on the output of the subject process.

  • A. True
  • B. False
Show answer and explanation ▾

Correct answer: A

The Risk Priority Number is the product of the severity, occurrence and detection ratings in an FMEA, and it is used to rank Failure Modes so the highest risks are addressed first.

Why the other options are wrong:

  • B. Ranking Failure Modes is exactly what the Risk Priority Number is used for, so the statement is not false.

Question 46

The purpose of ________________ is to analyze data and present it in a way we can make informed decisions as to what is happening in our process.

  • A. Data Sampling
  • B. Basic Statistics
  • C. Calculating Standard Deviation
  • D. Measurement System Analysis
Show answer and explanation ▾

Correct answer: B

Basic Statistics covers the methods used to summarize, analyze and present data, so that decisions about the process are based on what the data shows.

Why the other options are wrong:

  • A. Data Sampling is how data is selected and collected, not how it is analyzed and presented.
  • C. Calculating Standard Deviation is a single statistical measure, not the overall purpose described.
  • D. Measurement System Analysis evaluates the measurement method, not the process data itself.

Question 47

Process Capability is defined based on customer requirements, defect free performance and output over time.

  • A. True
  • B. False
Show answer and explanation ▾

Correct answer: A

Process Capability compares the output of a process over time with the customer's requirements, showing how well the process can perform free of defects, so the statement is true.

Why the other options are wrong:

  • B. The statement lists the elements that define Process Capability, so it is not false.

That was 47 of 120.

The full IASSC ICYB pack has all 120 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack

Not ready yet? Get the first 47 free as one PDF by email. Get the Half Pack →

About the ICYB exam

These 47 IASSC ICYB questions are free here, and as a free PDF by email.

They are drawn from the same bank as the full ICYB pack, which has 120 questions in total.

Back to blog