IASSC ICGB Practice Questions with Explanations
Free IASSC ICGB practice questions. 49 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
ICGB practice questions
Question 1
The use of station warning lights, tool boards and jidohka devices in the application of Lean accomplish which of these principles?
- A. Pilferage Minimization
- B. Visual Factory
- C. Management Awareness
- D. Operator Attentiveness
Show answer and explanation ▾
Correct answer: B
Warning lights, shadow tool boards and jidohka signals make the state of the work visible at a glance, which is the visual factory.
Why the other options are wrong:
- A. These tools are not meant to prevent theft.
- C. They are for the people on the floor, not about management awareness.
- D. They do not rely on the operator watching all the time, they show status visually.
Question 2
A Lean Principle that addresses efficiency by the process worker is called ____________________?
- A. Visual Factory
- B. Supervising
- C. Training
- D. Standardizing
Show answer and explanation ▾
Correct answer: D
Standardizing sets the best-known way to do each task so every worker performs it efficiently the same way.
Why the other options are wrong:
- A. Visual Factory is about making status visible.
- B. Supervising is not a Lean principle.
- C. Training supports standard work but is not the principle named.
Question 3
While management of a company must set the stage for all improvement efforts, which of these 5S’s is primarily driven by management?
- A. Straighten
- B. Sort
- C. Shine
- D. Sustain
Show answer and explanation ▾
Correct answer: D
Sustain is about keeping the first four S's going over time, which needs management support and discipline.
Why the other options are wrong:
- A. Straighten is carried out by the work team.
- B. Sort is carried out by the work team.
- C. Shine is carried out by the work team.
Question 4
As part of a Visual Factory plan __________ cards are created and utilized to identify areas in need of cleaning and organization.
- A. Kanban
- B. Kaizen
- C. Poke-Yoke
- D. WhoSai
Show answer and explanation ▾
Correct answer: A
Kanban means signal card, and it is the only card based visual signal among these choices. In a Visual Factory, cards posted in the workplace show at a glance where action is needed.
Why the other options are wrong:
- B. Kaizen is continuous improvement activity, not a card system.
- C. Poke-Yoke is mistake proofing, not a card system.
- D. WhoSai is not a recognized Lean card system.
Question 5
The use of Kanbans work best with pull systems for determining the timing of which products or services are produced.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
Kanban cards signal downstream demand, which triggers production in a pull system.
Why the other options are wrong:
- B. Kanban is built for pull systems, so the statement is true.
Question 6
When a Belt applies the practice of Poka-Yoke to a project challenge she is attempting to make certain the activity is _______________ .
- A. Well documented
- B. Removed from the line
- C. Mistake proofed
- D. Highly visible
Show answer and explanation ▾
Correct answer: C
Poka-Yoke is the Lean practice of mistake proofing, which designs the activity so an error cannot be made or is caught immediately before it becomes a defect.
Why the other options are wrong:
- A. Documentation supports standard work but does not prevent mistakes by design.
- B. Poka-Yoke improves an activity in place, it does not remove it from the line.
- D. Making work highly visible is the aim of the Visual Factory, not Poka-Yoke.
Question 7
The Lean Principle action in the 5S approach that deals with having those items needed regularly at hand and those items need less regularly stored out of the way is known as ___________.
- A. Shining
- B. Standardizing
- C. Sustaining
- D. Sorting
Show answer and explanation ▾
Correct answer: D
Among these choices, Sorting is the 5S action that separates items by how often they are needed, keeping regularly used items at the workplace and moving the rest out of the way.
Why the other options are wrong:
- A. Shining is cleaning the work area.
- B. Standardizing sets consistent methods for keeping the first steps in place.
- C. Sustaining is the discipline of keeping 5S going over time.
Question 8
SPC on the outputs is more preferred than SPC on the inputs when implementing SPC for your process.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: B
SPC is preferred on the critical inputs of a process, because controlling the X's prevents defects before they occur, while charting only the outputs detects a problem after it has already happened.
Why the other options are wrong:
- A. Monitoring outputs alone reacts to defects after the fact, so it is not the preferred approach.
Question 9
Significant variation in process performance is a consequence of several causes that can be classified using which of the terminologies shown. (Note: There are 2 correct answers). (Choose two.)
- A. Common
- B. Random
- C. Uneducated
- D. Special
- E. Vital
Show answer and explanation ▾
Correct answer: A, D
Process variation is classified as Common Cause, which is inherent to the process, or Special Cause, which comes from an assignable event outside the normal process.
Why the other options are wrong:
- B. Random describes the behavior of Common Cause variation, so it is not a second classification alongside Common.
- C. Uneducated is not a classification of variation.
- E. Vital describes the few most important inputs, not a type of variation.
Question 10
When it comes to Control one of the most effective means of eliminating defects is to _________________ .
- A. Train personnel often and thoroughly
- B. Keep a Six Sigma project going on the process at all times
- C. Design defect prevention into the product
- D. Have each process consist of no more than five steps
Show answer and explanation ▾
Correct answer: C
Designing defect prevention into the product or process removes the opportunity for the defect to occur, which is more effective than relying on people or inspection to catch it.
Why the other options are wrong:
- A. Training depends on people remembering and following it, so defects can still occur.
- B. Running a project continuously does not in itself eliminate defects.
- D. Limiting a process to five steps is not a defect elimination method.
Question 11
A periodic time frame can be used to arrange for Control Limit and Center Line calculations with good SPC implementation in a process.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
Control Limits and the Center Line are calculated from process data, and a good SPC implementation can schedule their review and recalculation on a periodic time frame so they keep reflecting the current process.
Why the other options are wrong:
- B. Periodic recalculation of limits is an accepted part of maintaining SPC charts.
Question 12
The data on SPC charts are typically constructed such that they have the most recent data point on the right hand side.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
SPC charts plot data in time order from left to right, so the most recent data point appears on the right hand side of the chart.
Why the other options are wrong:
- B. Control charts are time ordered with the newest point at the right.
Question 13
Which statement(s) describe an undesirable situation when implementing SPC?
- A. The lower Control Limit for the R chart is equal to zero
- B. Attempt to use SPC for tracking transaction times at a warehouse
- C. A process is in Statistical Control before implementation of SPC
- D. The Control Limits are wider than the customer specification limits
Show answer and explanation ▾
Correct answer: D
Control Limits wider than the customer specification limits mean the natural variation of the process exceeds what the customer accepts, so a process that is in control will still produce out of specification results.
Why the other options are wrong:
- A. A lower Control Limit of zero on an R chart is normal for small subgroup sizes.
- B. Transaction times are a valid measure to track with SPC.
- C. A process that is already in Statistical Control is a good starting point for SPC.
Question 14
If a process has Outliers which pair of charts is most preferable if subgroups will exist for the Continuous Data?
- A. Individual, Moving Range
- B. Xbar-R Charts
- C. Xbar-S Charts
- D. nP and P Charts
Show answer and explanation ▾
Correct answer: B
Xbar-R Charts are the standard pair for Continuous Data collected in subgroups, plotting the subgroup averages on one chart and the subgroup ranges on the other.
Why the other options are wrong:
- A. Individual and Moving Range charts are for individual readings without subgroups.
- C. Xbar-S Charts are typically chosen for larger subgroup sizes.
- D. nP and P Charts are for attribute data, not Continuous Data.
Question 15
After a Belt has put data through the smoothing process which chart would be used to look for trends in the data?
- A. Moving Average Chart
- B. Multi-Vari Chart
- C. X bar Chart
- D. Pareto Chart
Show answer and explanation ▾
Correct answer: A
A Moving Average Chart plots the average of consecutive data points, which smooths out short term noise and makes trends in the data easier to see.
Why the other options are wrong:
- B. A Multi-Vari Chart displays sources of variation, not smoothed data.
- C. An X bar Chart plots subgroup means, not smoothed data.
- D. A Pareto Chart ranks categories by frequency and does not show trends over time.
Question 16
A Belt concludes a Lean Six Sigma project with the creation of a Control Plan. At what point can the Control Plan be closed?
- A. Never, a Control Plan is a living document
- B. As soon as the Champion signs off
- C. Within 30 days of the LSS project review team meeting
- D. After the project has been presented at the recognition event
Show answer and explanation ▾
Correct answer: A
A Control Plan is a living document that stays with the process owner and is updated whenever the process changes, so it is never closed.
Why the other options are wrong:
- B. Champion sign off closes the project, not the Control Plan.
- C. No 30 day limit applies to a Control Plan.
- D. The recognition event has no bearing on how long the Control Plan is used.
Question 17
When analyzing a data set we frequently graph one metric as a function of another. If the slope of the Correlation line is -2.5 we would say the two metrics are ___________ correlated?
- A. Positively
- B. Not
- C. Negatively
- D. None
Show answer and explanation ▾
Correct answer: C
A negative slope means one metric decreases as the other increases, so a slope of -2.5 shows the two metrics are negatively correlated.
Why the other options are wrong:
- A. A positive correlation requires a positive slope.
- B. A slope clearly different from zero indicates a relationship.
- D. None does not describe a line with a slope of -2.5.
Question 18
Multiple Linear Regressions (MLR) is best used when which of these are applicable? (Note: There are 3 correct answers). (Choose three.)
- A. Non-linear relationships between the inputs X’s and output Y
- B. Uncertainty in the slope of the linear relationship between an X and a Y
- C. Relationships between Y (output) and more than one X (Input)
- D. Preventing the use of a Designed Experiment if unnecessary
- E. We assume that the X’s are independent of each other
Show answer and explanation ▾
Correct answer: C, D, E
Multiple Linear Regression models an output Y against more than one input X, assumes the X's are independent of each other, and can use existing data to avoid running a Designed Experiment when one is not needed.
Why the other options are wrong:
- A. Multiple Linear Regression models linear relationships, not non-linear ones.
- B. Uncertainty about a single slope concerns a simple regression of one X on Y.
Question 19
Fractional Factorial designs for an experimental approach are used when ____________ about the multiple metric interaction in a process.
- A. Much is known
- B. Little is known
- C. We don’t care
- D. Data exists
Show answer and explanation ▾
Correct answer: B
Fractional Factorial designs are screening experiments that run only part of the full set of combinations, so they are used early when little is known and the aim is to find which factors matter.
Why the other options are wrong:
- A. When much is known, screening with a fractional design is not the usual purpose.
- C. Not caring about interactions is not a basis for choosing an experimental design.
- D. The existence of data does not determine the choice of a fractional design.
Question 20
A Belt will occasionally do a quick experiment referred to as an OFAT which stands for ____________________.
- A. Only a Few Are Tested
- B. Opposite Factors Affect Technique
- C. One Factor At a Time
- D. Ordinary Fractional Approach Technique
Show answer and explanation ▾
Correct answer: C
OFAT stands for One Factor At a Time, an approach in which a single input is changed while all the others are held constant.
Why the other options are wrong:
- A. Only a Few Are Tested is not what OFAT stands for.
- B. Opposite Factors Affect Technique is not what OFAT stands for.
- D. Ordinary Fractional Approach Technique is not what OFAT stands for.
Question 21
The Regression Model for an observed value of Y contains the term which represents the Y axis intercept when X = 0.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
The Regression Model includes a constant term, which is the value of Y where the line crosses the Y axis, that is, when X equals 0.
Why the other options are wrong:
- B. The constant in the regression equation is the Y axis intercept.
Question 22
The actual experimental response data varied somewhat from what a Belt had predicted them to be. This is the result of which of these?
- A. Inefficiency of estimates
- B. Residuals
- C. Confounded data
- D. Gap Analysis
Show answer and explanation ▾
Correct answer: B
A Residual is the difference between an observed response and the value the model predicted for it, so the gap between actual and predicted data is made up of Residuals.
Why the other options are wrong:
- A. Inefficiency of estimates is not the term for the gap between observed and predicted values.
- C. Confounding means effects cannot be separated from each other.
- D. Gap Analysis compares current and desired performance, not observed and predicted data.
Question 23
A Six Sigma tool that helps to screen factors by using graphical techniques to logically subgroup multiple discrete X's plotted against a continuous Y is known as a _____________Chart.
- A. SIPOC
- B. Multi-Vari
- C. Box Plot
- D. Whisker
Show answer and explanation ▾
Correct answer: B
A Multi-Vari Chart plots a continuous Y against several discrete X's arranged in logical subgroups, giving a graphical way to screen which factors contribute most to the variation.
Why the other options are wrong:
- A. A SIPOC is a high level process map, not a chart of data.
- C. A Box Plot shows the distribution of one variable, not logically subgrouped multiple X's.
- D. Whisker refers to part of a Box Plot, not a factor screening chart.
Question 24
A primary benefit of using a Multi-Vari Chart is it provides a visual presentation of two-way interactions.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
A Multi-Vari Chart displays the output across combinations of the plotted factors, so the way one factor's effect changes with the level of another is visible on the chart.
Why the other options are wrong:
- B. The chart lays out factor combinations side by side, which does show two-way interactions visually.
Question 25
Bias in Sampling is an error due to lack of independence among random samples or due to systematic sampling procedures.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
Sampling Bias arises when samples are not independent or when the sampling procedure systematically favors some outcomes, so the sample no longer represents the population.
Why the other options are wrong:
- B. Lack of independence and systematic sampling procedures are the recognized sources of Sampling Bias.
Question 26
To draw inferences about a sample population being studied by modeling patterns of data in a way that accounts for randomness and uncertainty in the observations is known as ____________________.
- A. Influential Analysis
- B. Inferential Statistics
- C. Physical Modeling
- D. Sequential Inference
Show answer and explanation ▾
Correct answer: B
Inferential Statistics draws conclusions about a population from sample data by modeling the patterns in the data in a way that accounts for randomness and uncertainty.
Why the other options are wrong:
- A. Influential Analysis is not the term for drawing inferences from sample data.
- C. Physical Modeling is not a statistical inference method.
- D. Sequential Inference is not the term for this general practice.
Question 27
For a Normal Distribution the Mean, Median and Mode are the same data point.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
A Normal Distribution is symmetric with a single peak at its center, so the Mean, Median and Mode all fall at the same point.
Why the other options are wrong:
- B. The symmetry of the Normal Distribution places all three measures at the center.
Question 28
When two Inputs have an impact on the Output together yet seem to have no or little impact on their own this is called a/an ________________.
- A. Interaction
- B. Oddity
- C. Coincidence
- D. Impossibility
Show answer and explanation ▾
Correct answer: A
An Interaction exists when the effect of one Input on the Output depends on the level of another Input, so the two can matter together even when each shows little effect alone.
Why the other options are wrong:
- B. Oddity is not a statistical term for a combined effect.
- C. Coincidence implies no real relationship between the Inputs and the Output.
- D. Impossibility does not describe a combined effect of two Inputs.
Question 29
Hypothesis Testing can save time and help avoid high costs of experimental efforts by using existing data.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
Hypothesis Testing can be run on data that already exists, which lets a Belt test a theory about a process without the time and cost of setting up new experiments.
Why the other options are wrong:
- B. Using existing data for Hypothesis Tests does save time and experimental cost.
Question 30
It is a Type II error if we decide to reject the Null Hypothesis when it is actually true.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: B
Rejecting a Null Hypothesis that is actually true is a Type I error. A Type II error is failing to reject a Null Hypothesis that is actually false.
Why the other options are wrong:
- A. The situation described is a Type I error, not a Type II error.
Question 31
A Belt experienced an Alpha of .05 and a Beta of .10 and knew these are the most common risk levels when running a Statistical test.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
An Alpha risk of 0.05 gives 95% confidence and a Beta risk of 0.10 gives 90% power, and these are commonly used risk levels for a Statistical test.
Why the other options are wrong:
- B. An Alpha of 0.05 and a Beta of 0.10 are conventional, widely used risk levels.
Question 32
Inferential Statistics is largely about Significance. There are both Practical and _______________ Significance to consider during an analysis of data in a Lean Six Sigma project.
- A. Problematic
- B. Impractical
- C. Usable
- D. Statistical
Show answer and explanation ▾
Correct answer: D
A result has Statistical Significance when it is unlikely to be due to chance, and Practical Significance when the difference is large enough to matter to the business. Both are considered in a project.
Why the other options are wrong:
- A. Problematic is not a type of Significance.
- B. Impractical is not a type of Significance.
- C. Usable is not a type of Significance.
Question 33
The Central Limit Theorem helps us understand the ___________ we are taking and is the basis for using sampling to estimate population parameters.
- A. Analysis
- B. Kurtosis
- C. Risk
- D. Route
Show answer and explanation ▾
Correct answer: C
The Central Limit Theorem describes how sample means are distributed around the population mean, which lets a Belt quantify the risk of using a sample to estimate population parameters.
Why the other options are wrong:
- A. Analysis is not what the theorem quantifies when sampling.
- B. Kurtosis describes the shape of the tails of a distribution.
- D. Route is not a statistical concept.
Question 34
Hypothesis Tests determine the probabilities of differences between observed data and the hypothesis being solely due to _________ based on the result of the P-values.
- A. Human error
- B. Measurement error
- C. Shift differences
- D. Chance
Show answer and explanation ▾
Correct answer: D
The P-value is the probability of seeing a difference at least as large as the one observed if the Null Hypothesis were true, that is, a difference due solely to chance.
Why the other options are wrong:
- A. A P-value does not measure human error.
- B. A P-value does not measure measurement error.
- C. Shift differences may be the factor under test, not what the P-value attributes the difference to.
Question 35
The Alpha level of a test (level of significance) represents the yardstick against which P-values are measured and the Null Hypothesis is rejected if the P-value is which of these?
- A. Less than the Alpha level.
- B. Greater than the Alpha level.
- C. Greater than the Beta and Alpha level.
- D. Less than one minus Alpha.
- E. Less than the power of one minus Beta.
Show answer and explanation ▾
Correct answer: A
The Null Hypothesis is rejected when the P-value is less than the Alpha level, because a result that extreme would then occur by chance less often than the Alpha risk accepted for the test.
Why the other options are wrong:
- B. A P-value greater than Alpha means failing to reject the Null Hypothesis.
- C. Beta is not part of the decision rule for rejecting the Null Hypothesis.
- D. One minus Alpha is the confidence level, not the rejection threshold.
- E. Power is not the threshold that P-values are compared with.
Question 36
A 1-Sample t-test is used when you want to compare the Median of one distribution to a target value.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: B
A 1-Sample t-test compares the Mean of one distribution to a target value. Comparing a Median to a target calls for a non-parametric test.
Why the other options are wrong:
- A. The t-test is a test of the Mean, not the Median.
Question 37
When a Belt is analyzing sample data she should keep in mind that 95% of Normally Distributed data is within +/- 2 Standard Deviations from the Mean.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
For Normally Distributed data, about 95% of the values fall within plus or minus 2 Standard Deviations of the Mean.
Why the other options are wrong:
- B. The 95% figure for plus or minus 2 Standard Deviations is a standard property of the Normal Distribution.
Question 38
The Standard Deviation for the distribution of Means is called the ___________ and approaches zero as the sample size reaches 30.
- A. Standard Error
- B. Mean Deviation
- C. Mean Spread
- D. Mean Error
Show answer and explanation ▾
Correct answer: A
The Standard Deviation of the distribution of sample Means is called the Standard Error. It equals the Standard Deviation divided by the square root of the sample size, so it shrinks as the sample grows.
Why the other options are wrong:
- B. Mean Deviation is not the term for the Standard Deviation of sample Means.
- C. Mean Spread is not the term for the Standard Deviation of sample Means.
- D. Mean Error is not the term for the Standard Deviation of sample Means.
Question 39
According to a manager it takes an average weekday commute of 39 minutes with a Standard Deviation of 7 minutes for the employees to get to work when they use their personal vehicles for their office commute while management set a policy of not more than 40 minutes for their daily one-way commute. A survey conducted one day on 70 employees showed an average of 34 minutes commuting time using the metro public transportation system with a Standard Deviation of 21 minutes. For the employees choosing to increase their chances to come on time using personal transportation their variation should be reduced to ___________?
- A. 1 minute
- B. 6 minutes
- C. 3.5 minutes
- D. Eliminate it to 0.0 minutes
Show answer and explanation ▾
Correct answer: C
With a Standard Deviation of 3.5 minutes, the 40 minute limit sits about 0.29 Standard Deviations above the 39 minute Mean, the same margin the metro has with 6 minutes over 21, so the on time probability matches the metro.
Why the other options are wrong:
- A. 1 minute is not the reduction that brings personal vehicles level with the metro.
- B. At 6 minutes the margin to the 40 minute limit is still smaller than the metro's.
- D. Eliminating variation completely is not achievable for a commute.
Question 40
According to a manager it takes an average weekday commute of 39 minutes with a Standard Deviation of 7 minutes for the employees to get to work while they use their personal vehicles for their office commute while the management set a policy of not more than 40 minutes for their daily one-way commute. A survey conducted one day on 70 employees showed an average of 34 minutes commuting time using the metro public transportation system with a Standard Deviation of 21 minutes. If the Standard Deviation is uncontrollable then the other option to increase the probability of coming in on time via personal vehicles to work could be ____________?
- A. Increase the average time of commute
- B. Maintain the average time of commute and change route to work
- C. Reduce average commute time to work by departing earlier
- D. Change policy at work and request for flexible times based on location
Show answer and explanation ▾
Correct answer: C
When the Standard Deviation cannot be changed, the only way to raise the probability of meeting the 40 minute limit is to move the Mean further below it, which means reducing the average commute time.
Why the other options are wrong:
- A. Increasing the average moves the Mean toward and past the 40 minute limit.
- B. Keeping the same average leaves the probability unchanged.
- D. Changing the policy does not improve the probability of meeting the current limit.
Question 41
Which of the following is used to test the significance for the analysis of a Variance Table?
- A. t Test
- B. F Test
- C. Chi Square Test
- D. Acid Test
Show answer and explanation ▾
Correct answer: B
An Analysis of Variance table tests significance with the F Test, which compares the variation between groups with the variation within groups.
Why the other options are wrong:
- A. The t Test compares one or two Means and is not the statistic in a Variance Table.
- C. The Chi Square Test is used for count data in categories.
- D. Acid Test is not a statistical test.
Question 42
Non-parametric testing is done when which of these are applicable? (Note: There are 3 correct answers). (Choose three.)
- A. When the traditional t tests don’t produce the results we need
- B. A Hypothesis Test for the Median of the population is in question
- C. It does not require data to come from Normally Distributed populations
- D. They look at the Median rather than the Mean of populations
- E. When there are no parameters to measure in the process
Show answer and explanation ▾
Correct answer: B, C, D
Non-parametric tests do not require the data to come from Normally Distributed populations, and they test the Median rather than the Mean, so they are used when a Hypothesis Test about a population Median is needed.
Why the other options are wrong:
- A. A test is chosen for the type of data, not because another test gave an unwanted result.
- E. Non-parametric does not mean the process has no parameters to measure.
Question 43
The Mann-Whitney Test is used to test if the Means for two samples are different.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: B
The Mann-Whitney Test is a non-parametric test that compares the Medians of two samples. A difference in Means for two samples is tested with a 2-Sample t-test.
Why the other options are wrong:
- A. The Mann-Whitney Test compares Medians, not Means.
Question 44
Contingency Tables are used to perform which of these functions?
- A. Illustrate one-tail proportions
- B. Analyze the "what if" scenario
- C. Contrast the Outliers under the tail
- D. Compare more than two sample proportions with each other
Show answer and explanation ▾
Correct answer: D
A Contingency Table arranges counts by category so that the proportions of more than two samples can be compared with each other, typically with a Chi Square test.
Why the other options are wrong:
- A. Contingency Tables are not used to illustrate one-tail proportions.
- B. What if analysis is not the purpose of a Contingency Table.
- C. Contingency Tables do not deal with Outliers.
Question 45
Skewed, or Mixed, Distributions occur when data comes from several sources that are supposed to be the same yet are not.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
Combining data from several sources that should be the same but are not gives a mixed distribution that departs from the symmetric Normal shape, which is the situation the statement describes.
Why the other options are wrong:
- B. Pooling sources that differ is a recognized cause of these non-Normal distributions.
Question 46
The perfect sample size is the minimum number of data points required to provide exactly 6% overlap or risk if one wants a 95% confidence level.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: B
Sample size is set from the confidence level, the variation in the data and the size of difference to detect, and a 95% confidence level corresponds to a 5% risk, not 6%.
Why the other options are wrong:
- A. A 95% confidence level does not pair with a 6% risk.
Question 47
Hypothesis Testing can help avoid high costs of experimental efforts by using existing data.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
Hypothesis Tests can be run on data the process has already produced, so a Belt can check a theory without paying for new experimental runs.
Why the other options are wrong:
- B. Using existing data for Hypothesis Tests does avoid experimental cost.
Question 48
Hypothesis Tests determine the probabilities of differences between observed data and the hypothesis being solely due to chance. This is determined based on the result of the ______________.
- A. Random acts
- B. P-values
- C. Standard Deviations
- D. R-values
Show answer and explanation ▾
Correct answer: B
The P-value gives the probability that a difference as large as the one observed would occur by chance alone if the Null Hypothesis were true, and it is the result used to make the decision.
Why the other options are wrong:
- A. Random acts is not a statistical result.
- C. Standard Deviations measure spread, not the probability of a chance difference.
- D. R-values measure the strength of correlation.
Question 49
It is a Type I error if we reject the Null Hypothesis when it is actually true.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
A Type I error is rejecting the Null Hypothesis when it is actually true. Its probability is the Alpha risk.
Why the other options are wrong:
- B. Rejecting a true Null Hypothesis is the definition of a Type I error.
That was 49 of 143.
The full IASSC ICGB pack has all 143 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 52 free as one PDF by email. Get the Half Pack →
About the ICGB exam
These 49 IASSC ICGB questions are free here. The free PDF has 52, free by email.
They are drawn from the same bank as the full ICGB pack, which has 143 questions in total.