Huawei H31-341 HCIP-Transmission Practice Questions with Explanations
Free Huawei H31-341 HCIP-Transmission practice questions. 18 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
H31-341 practice questions
Question 1
For a 100 Gbit/s signal, the baud rate of the data is actually 25 Gbaud/s (100 ÷ 2 ÷ 2=25).
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
A 100 Gbit/s signal that carries 2 bits per symbol on each of 2 polarizations gives 100 / 2 / 2 = 25 Gbaud. The statement is true.
Why the other options are wrong:
- B. The calculation 100 / 2 / 2 = 25 holds, so the statement is not false.
Question 2
Which of the following are not non-linear effects? (Choose all that apply.)
- A. PMD
- B. FWM
- C. SRS
- D. CD
Show answer and explanation ▾
Correct answer: A, D
PMD (polarization mode dispersion) and CD (chromatic dispersion) are linear effects. FWM (four-wave mixing) and SRS (stimulated Raman scattering) are non-linear, so they are not answers to this 'not non-linear' question.
Why the other options are wrong:
- B. FWM is a non-linear effect.
- C. SRS is a non-linear effect.
Question 3
Which of the following DCC types are used by ESC? (Choose all that apply.)
- A. Pilot-tone DCC
- B. Fixed frame structure DCC
- C. Inserted DCC
- D. Embedded DCC
Show answer and explanation ▾
Correct answer: B, D
The electrical supervisory channel carries supervisory information inside the service signal overhead instead of on a separate supervisory wavelength. The two DCC types it uses are the fixed frame structure DCC and the embedded DCC.
Why the other options are wrong:
- A. Pilot-tone DCC is not one of the two DCC types listed for ESC.
- C. Inserted DCC is not one of the two DCC types listed for ESC.
Question 4
The EDFA amplifies service signals and brings noise to the system. It is the main source of noise.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
An EDFA amplifies the service signal and adds amplified spontaneous emission noise, which makes it the main noise source in the system. The statement is true.
Why the other options are wrong:
- B. The EDFA is the main noise source in the system, so the statement is not false.
Question 5
Which of the following statements about QPSK modulation are false?
- A. In QPSK, one phase represents two bits, which is also equivalent to splitting a data stream into two, reducing the data rate by half.
- B. QPSK assigns two possible phase values in the optical field. This decreases the baud rate of optical signals by half while keeping the line rate unchanged.
- C. ePDM-QPSK is a preferred modulation format for 100G WDM transmission.
- D. QPSK modulation can increase the spectral bandwidth, reduce the OSNR requirement and non-linear effects in optical fibers, and improve the dispersion tolerance and PMD tolerance.
Show answer and explanation ▾
Correct answer: B
QPSK uses four possible phase values, not two, and each phase carries two bits. That is why the baud rate is half the line rate, so the statement that QPSK assigns two phase values is the false one.
Why the other options are wrong:
- A. This correctly describes one phase representing two bits, so it is not the false statement.
- C. ePDM-QPSK is the preferred format for 100G WDM transmission, so this is not the false statement.
- D. This describes the transmission benefits attributed to QPSK, so it is not the false statement.
Question 6
The OptiXtrans DC908 chassis can be a DC chassis or an AC chassis.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
The OptiXtrans DC908 chassis is available as a DC-powered chassis and as an AC-powered chassis, so the statement is true.
Why the other options are wrong:
- B. The DC908 chassis is not limited to a single power type.
Question 7
Which of the following statements about a TNG2WSMD09 board are true? (Choose all that apply.)
- A. It implements optical-layer service grooming for multiple wavelengths.
- B. It is a reconfigurable optical add/drop multiplexing unit.
- C. It is a 9-port wavelength selective multiplexer/demultiplexer board (Super C band).
- D. It supports optical power adjustment and online optical power detection.
Show answer and explanation ▾
Correct answer: C, D
The TNG2WSMD09 is a 9-port wavelength selective multiplexer and demultiplexer board for the Super C band, and it supports optical power adjustment together with online optical power detection.
Why the other options are wrong:
- A. This is not one of the two statements that describe the TNG2WSMD09 here.
- B. This is not one of the two statements that describe the TNG2WSMD09 here.
Question 8
Which of the following statements about optical multiplexer and demultiplexer boards is false?
- A. TNG2D6001 demultiplexes one multiplexed-wavelength signal into a maximum of 60 even-wavelength optical signals.
- B. TNG2M60V is a 60-channel multiplexer board with VOA (Super C band).
- C. TNG2UM40 is a 40-channel multiplexer board (Super C band).
- D. The UITL board multiplexes and demultiplexes signals with 50 GHz spacing and signals with 100 GHz spacing.
Show answer and explanation ▾
Correct answer: B
The description given for the TNG2M60V does not match that board, which makes it the false statement among the four board descriptions.
Why the other options are wrong:
- A. This is not the false statement about these boards.
- C. This is not the false statement about these boards.
- D. This is not the false statement about these boards.
Question 9
WDM systems generally use DCMs to compensate for chromatic dispersion.
Which of the following statements about DCM-based dispersion compensation is false?
- A. If the DCM configuration is incorrect, the system OSNR will deteriorate.
- B. Compared with line transmission optical fibers, DCMs are prone to non-linear effects. Therefore, the incident optical power of the DCMs must be controlled.
- C. For a 10G system with a fiber length shorter than 400 km, G.652-specific DCMs can be used to compensate for dispersion in G.655 (Leaf) optical fibers.
- D. If the DCM configuration is false, the receive-end performance will deteriorate.
Show answer and explanation ▾
Correct answer: C
The statement about using G.652-specific DCMs to compensate G.655 (LEAF) fiber is the one that does not hold. The other three describe real effects of DCM configuration and of the incident optical power on a DCM.
Why the other options are wrong:
- A. An incorrect DCM configuration does degrade the system OSNR, so this is not the false statement.
- B. The incident optical power of a DCM must be controlled because of non-linear effects, so this is not the false statement.
- D. An incorrect DCM configuration does degrade receive-end performance, so this is not the false statement.
Question 10
Which of the following statements about the TMK1UNS5 board is false?
- A. It supports the transmission of OTN services with a total bandwidth of not higher than 200 Gbit/s.
- B. It supports regeneration mode, which can be used at an electrical regeneration site in the system to implement the electrical regeneration of corresponding optical signals.
- C. It is a universal line board that supports hybrid transmission of OTN, SDH, and packet services.
- D. It supports hybrid transmission of ODU0, ODU1, ODU2, ODU2e, ODU3, ODU4, and ODUflex signals.
Show answer and explanation ▾
Correct answer: B
The regeneration mode statement is the one that does not apply to the TMK1UNS5, which is a universal line board for hybrid OTN, SDH and packet transmission. That makes it the false statement.
Why the other options are wrong:
- A. This is not the false statement about the board.
- C. The board is a universal line board for OTN, SDH and packet services, so this is not the false statement.
- D. This is not the false statement about the board.
Question 11
Which of the following statements about OUT boards are true? (Choose all that apply.)
- A. Standard mode has fewer mapping path layers than compatible mode.
- B. Boards in standard mode are easy to operate and can reduce maintenance costs.
- C. For boards in standard mode, only the service mapping paths of channels or physical ports are displayed on the NMS, and all ODU-layer service mapping paths are displayed at physical ports.
- D. For boards in compatibility mode, users do not need to concern about the internal logical ports of the boards when configuring crossconnections.
Show answer and explanation ▾
Correct answer: A, B, C
Standard mode simplifies the board model: it has fewer mapping path layers than compatible mode, is easier to operate and maintain, and shows only the mapping paths of channels or physical ports on the NMS, with all ODU-layer paths presented at the physical ports.
Why the other options are wrong:
- D. In compatible mode users still have to work with the internal logical ports of the board when configuring cross-connections.
Question 12
When configuring electrical cross-connections for a TMK1TDC board, you must configure intra-board cross-connections.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
Configuring electrical cross-connections for a TMK1TDC board includes configuring intra-board cross-connections, so the statement is true.
Why the other options are wrong:
- B. Intra-board cross-connections are required on this board, not optional.
Question 13
The DWSS20 board supports grooming of 20-degree optical signals.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
The DWSS20 board does not support grooming of optical signals in 20 degrees, so the statement is false. The number in the board name is not the number of degrees it grooms.
Why the other options are wrong:
- A. The DWSS20 does not support grooming of 20-degree optical signals.
Question 14
Unlike ROADM, FOADM has some disadvantages.
What are the disadvantages of FOAM? (Choose all that apply.)
- A. Site visits are required for node capacity expansion and service adjustment.
- B. Wavelengths are allocated based on planning. Once they have been allocated, it is difficult to rellocate them, making network flexibility poor.
- C. During node capacity expansion, the power budget must be adjusted manually onsite. It cannot be adjusted remotely or automatically.
- D. Wavelength services cannot be provisioned quickly.
Show answer and explanation ▾
Correct answer: A, B, C, D
FOADM wavelengths are fixed by planning and hard to reallocate, so expansion and service changes need site visits, the power budget has to be adjusted manually onsite, and wavelength services cannot be provisioned quickly. ROADM removes all four limits through remote reconfiguration.
Question 15
Gain is an important counter of an OA, expressed in dB.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
Gain is a main performance counter of an optical amplifier. It is the ratio of output optical power to input optical power and is expressed in dB.
Why the other options are wrong:
- B. Gain is an important optical amplifier counter and its unit is dB.
Question 16
After a device is powered on, what need to be checked on subrack fans? (Choose all that apply.)
- A. The PWR indicator on the subrack is steady on.
- B. The FAN indicator on the fan tray assembly is steady green.
- C. The fans have been started.
- D. The air flows through the upper and lower parts of the subrack.
Show answer and explanation ▾
Correct answer: B, C, D
The fan check after power-on confirms that the FAN indicator on the fan tray assembly is steady green, that the fans have started, and that air is flowing through the upper and lower parts of the subrack.
Why the other options are wrong:
- A. The PWR indicator shows the subrack power status, which is not part of the fan check.
Question 17
In an OTN (80 wavelengths in full configuration), the input optical power of an amplifier ranges from -16 dBm to 4dBm. If 10 wavelengths pass through the amplifier, what is the nominal multiplexed-wavelength input optical power of this amplifier (the noise impact is not considered)?
- A. -16-10lg10+10lg80
- B. -16-10lg80+10lg10
- C. 4-10lg10+10lg80
- D. 4-10lg80+10lg10
Show answer and explanation ▾
Correct answer: A
The amplifier input range runs from -16 dBm to 4 dBm, with 80 wavelengths at full configuration and 10 wavelengths passing through. The nominal multiplexed-wavelength input optical power for this case is written from the -16 dBm figure with the 10lg terms for 10 and 80 wavelengths, which gives -16-10lg10+10lg80.
Why the other options are wrong:
- B. This is not the expression for the nominal multiplexed-wavelength input optical power in this case.
- C. This is not the expression for the nominal multiplexed-wavelength input optical power in this case.
- D. This is not the expression for the nominal multiplexed-wavelength input optical power in this case.
Question 18
If the intermediate flatness method is used, the objective of single-wavelength optical power adjustment at the transmit and receive ends is to ensure that the flatness of the single-wavelength input optical power is within the range of the nominal single-wavelength input optical power ( ).
- A. ±2 dB
- B. ±3 dB
- C. ±4dB
- D. ±1 dB
Show answer and explanation ▾
Correct answer: A
With the intermediate flatness method, single-wavelength optical power is adjusted at the transmit and receive ends so that each single-wavelength input optical power stays within plus or minus 2 dB of the nominal single-wavelength input optical power.
Why the other options are wrong:
- B. Plus or minus 3 dB is wider than the flatness range this method targets.
- C. Plus or minus 4 dB is wider than the flatness range this method targets.
- D. Plus or minus 1 dB is not the flatness range this method targets.
That was 18 of 118.
The full Huawei H31-341 HCIP-Transmission pack has all 118 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 20 free as one PDF by email. Get the Half Pack →
About the H31-341 exam
These 18 Huawei H31-341 HCIP-Transmission questions are free here. The free PDF has 20, free by email.
They are drawn from the same bank as the full H31-341 pack, which has 118 questions in total.