Huawei H13-611 HCIA-Storage Practice Questions with Explanations
Free Huawei H13-611 HCIA-Storage practice questions. 80 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
H13-611 practice questions
Question 1
Which of the following are the 3 layers of components that storage systems are made up of? (Choose three.)
- A. Storage Analysis
- B. Storage Solution
- C. Storage Software
- D. Storage Hardware
Show answer and explanation ▾
Correct answer: B, C, D
A storage system is built from three layers: hardware (drives and servers), software (management, backup, virtualization) and the solution that combines them.
Why the other options are wrong:
- A. Storage Analysis is not one of the three layers of a storage system.
Question 2
Which of the following is not the benefits of converged storage systems?
- A. The same device is able to provide both block storage and file storage.
- B. Saving of rack space due to integration of equipment into one device.
- C. Converged storage system has better data protection compared to other non-converged systems.
- D. Unified management of storage resources.
Show answer and explanation ▾
Correct answer: C
Converged storage brings block and file onto one device, saves space and unifies management. Better data protection is not something converging gives you.
Why the other options are wrong:
- A. Serving block and file from one device is a core benefit of converged storage.
- B. Combining equipment in one device saves rack space, so it is a benefit.
- D. Unified management of resources is a benefit of converged storage.
Question 3
Which of the following dimensions are often used to express the data used in Big Data scenarios? (Choose all that apply.)
- A. Variety
- B. Velocity
- C. Verticality
- D. Volume
Show answer and explanation ▾
Correct answer: A, B, D
Big Data is commonly described by variety, velocity and volume: kinds of data, speed of generation and amount of data.
Why the other options are wrong:
- C. Verticality is not one of the standard Big Data dimensions.
Question 4
The only cable type that can be used to connect disk enclosures is the mini SAS cable.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: A
Disk enclosures can be connected by more than one cable type, so the claim that only mini SAS cables work is false.
Why the other options are wrong:
- B. Other cable types can also connect disk enclosures, so the statement is not true.
Question 5
Based on common ICT architecture, what effect does network latency have on the performance of networks?
- A. Low latency will cause network performance to drop.
- B. Higher latency has better network performance.
- C. Higher latency allows more data to be transmitted.
- D. Low latency allows quicker data transmission in networks.
Show answer and explanation ▾
Correct answer: D
Latency is the delay before a transfer begins. The lower it is, the sooner data moves, so performance improves.
Why the other options are wrong:
- A. Low latency improves performance, it does not reduce it.
- B. Higher latency means more delay, which is worse performance.
- C. Latency is delay, not capacity, so higher latency does not carry more data.
Question 6
IP SAN uses underlying optical networks to connect servers and storage systems.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
IP SAN carries SCSI commands over standard Ethernet and TCP/IP networks using the iSCSI protocol. A dedicated Fibre Channel network, usually built with optical links, is the basis of FC SAN, not IP SAN.
Why the other options are wrong:
- A. The underlying network of an IP SAN is Ethernet and TCP/IP, not a dedicated optical Fibre Channel network.
Question 7
Statement 1: Multimode optic cables are usually longer than single mode cables.
Statement 2: Sharp cable bends lead to weaker signal at the end of the cable.
- A. Both statements 1 and 2 are false
- B. Statement 1 is true and 2 is false
- C. Statements 1 and 2 are both true
- D. Statement 1 is false and statement 2 is true
Show answer and explanation ▾
Correct answer: D
Single-mode fiber supports much longer distances than multimode fiber, so statement 1 is false. A sharp bend lets light escape from the fiber core, which weakens the signal at the far end, so statement 2 is true.
Why the other options are wrong:
- A. Statement 2 is true, because sharp bends do weaken the signal.
- B. Statement 1 is false, because multimode runs are shorter than single-mode runs, and statement 2 is true.
- C. Statement 1 is false, because multimode cables cover shorter distances than single-mode cables.
Question 8
Statement 1: RAID 2.0+ is NOT based on traditional RAID technologies.
Statement 2: RAID 2.0+ has excellent rebuild characteristics.
- A. Statement 1 is false and statement 2 is true.
- B. Statement 1 is true and statement 2 is false.
- C. Statements 1 and 2 are both true.
- D. Both statements 1 and 2 are false.
Show answer and explanation ▾
Correct answer: A
RAID 2.0+ still uses the traditional RAID levels and algorithms, but applies them to chunks instead of whole disks, so statement 1 is false. Because all disks in the domain take part in reconstruction, rebuilds are fast, so statement 2 is true.
Why the other options are wrong:
- B. Statement 1 is false, because RAID 2.0+ builds on traditional RAID levels, and statement 2 is true.
- C. Statement 1 is false, because RAID 2.0+ is based on traditional RAID technology.
- D. Statement 2 is true, because RAID 2.0+ reconstructs data quickly.
Question 9
Statement 1:
A port can be listed in multiple zones.
Statement 2:
A switch configuration can contain multiple zones.
- A. Statement 1 and 2 are true.
- B. Statement 1 is false; Statement 2 is true.
- C. Statement 1 is true; Statement 2 is false.
- D. Statement 1 and 2 are false.
Show answer and explanation ▾
Correct answer: A
A switch port or device can be a member of several zones at the same time, and a zone configuration on a switch normally holds many zones. Both statements are true.
Why the other options are wrong:
- B. Statement 1 is true, because a port can belong to more than one zone.
- C. Statement 2 is true, because a switch configuration can hold many zones.
- D. Both statements are true, so neither can be marked false.
Question 10
Statement 1: Multipathing is caused by adding redundant hardware.
Statement 2: Huawei offers a different version of UltraPath for different operating systems.
- A. Statement 1 and 2 are both true.
- B. Both statements 1 and 2 are false.
- C. Statement 1 is false and statement 2 is true.
- D. Statement 1 is true and statement 2 is false.
Show answer and explanation ▾
Correct answer: A
Redundant HBAs, switches and controller ports create more than one path between a host and the same LUN, which is what multipathing means. Huawei supplies separate UltraPath versions for different operating systems, so both statements are true.
Why the other options are wrong:
- B. Both statements are true, so neither can be marked false.
- C. Statement 1 is true, because redundant hardware is what creates multiple paths.
- D. Statement 2 is true, because UltraPath is released in different versions for different operating systems.
Question 11
SAN is a storage architecture that connects storage device and application servers through network.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: B
A storage area network is a dedicated network, built on Fibre Channel or IP, that connects storage devices to application servers so the servers can use the storage as block devices.
Why the other options are wrong:
- A. The statement is the standard definition of a SAN, so it is not false.
Question 12
Statement 1:
A disk drive with a high latency performs better than a disk drive with a low latency.
Statement 2:
A smaller seek time means that the disk performs better.
- A. Statement 1 and 2 are true.
- B. Statement 1 is true; Statement 2 is false.
- C. Statement 1 is false; Statement 2 is true.
- D. Statement 1 and 2 are false.
Show answer and explanation ▾
Correct answer: C
Latency is delay, so a drive with higher latency performs worse and statement 1 is false. A shorter seek time means the head reaches the right track sooner, so the disk performs better and statement 2 is true.
Why the other options are wrong:
- A. Statement 1 is false, because higher latency means lower performance.
- B. Statement 1 is false, because higher latency means lower performance, and statement 2 is true.
- D. Statement 2 is true, because a smaller seek time improves performance.
Question 13
Match the RAID level with the characteristics. (1)RAID 0 (2)RAID 5 (3)RAID 10 (4)RAID 6 (a) Cost effective (b)Allows double disk failure (c)Highest performance (d)No data protection.
- A. 1-d; 2-a; 3-b; 4 - c
- B. 1-a; 2-d; 3-b; 4 - c
- C. 1-a; 2-b; 3-c; 4 - d
- D. 1-d; 2-a; 3-c; 4 - b
Show answer and explanation ▾
Correct answer: D
RAID 0 only stripes data and gives no protection. RAID 5 is cost effective because it spends one disk of capacity on parity. RAID 10 gives the highest performance of the protected levels listed, and RAID 6 survives two failed disks.
Why the other options are wrong:
- A. RAID 10 does not guarantee survival of any two disk failures, and RAID 6 is not the highest performer.
- B. RAID 5 does provide data protection, so it cannot be matched with no data protection.
- C. RAID 6 provides protection against two disk failures, so it cannot be matched with no data protection.
Question 14
Which of the following statements are characteristics of pre-copy technology? (Choose all that apply.)
- A. Improves system reliability.
- B. Reduces system performance.
- C. Migrates data from a suspected faulty disk to a hot spare disk immediately after the error count of the suspected faulty disk exceeds the preset threshold.
- D. Reduces the occurrence of reconstruction.
Show answer and explanation ▾
Correct answer: A, C, D
Pre-copy watches disk health and, once the error count of a suspect disk passes the threshold, copies its data to a hot spare before the disk fails. This avoids many reconstructions and so improves system reliability.
Why the other options are wrong:
- B. Pre-copy is not a technique that lowers system performance, since its purpose is to protect data before a disk fails.
Question 15
Statement 1:
A company should know what the Cost Of Downtime is to determine the backup strategy.
Statement 2: For the business continuity it is not important to determine the RTO.
- A. Statement 1 and Statement 2 are both True.
- B. Statement 1 is False; Statement 2 is True.
- C. Statement 1 and Statement 2 are both False.
- D. Statement 1 is True; Statement 2 is False.
Show answer and explanation ▾
Correct answer: D
The cost of downtime shows how much a company can justify spending on protection, so it shapes the backup strategy. The recovery time objective states how quickly services must be restored, which makes it essential to business continuity.
Why the other options are wrong:
- A. Statement 2 is false, because the RTO is a central input to business continuity planning.
- B. Statement 1 is true and statement 2 is false, the reverse of this option.
- C. Statement 1 is true, because the cost of downtime guides the backup strategy.
Question 16
Statement 1: Port zoning is preferred for zoning a FC switch when there are a lot of changes to the patch points.
Statement 2: Alias zoning is a user friendly version of soft zoning.
- A. Statements 1 and 2 are false
- B. Statement 1 is true; Statement 2 is false
- C. Statement 1 and 2 are true
- D. Statement 1 is false; Statement 2 is true
Show answer and explanation ▾
Correct answer: D
Port zoning ties a zone to physical switch ports, so every change of patch point forces a zoning change and statement 1 is false. Alias zoning gives readable names to WWNs used in soft zoning, so statement 2 is true.
Why the other options are wrong:
- A. Statement 2 is true, because aliases make soft zoning easier to read and manage.
- B. Statement 1 is false and statement 2 is true, the reverse of this option.
- C. Statement 1 is false, because port zoning is the least flexible method when patch points change.
Question 17
Select the correct statements about the structure and functions of the hard disk components. (Choose all that apply.)
- A. Disk platter is responsible of storing data in binary form.
- B. The disk connector is responsible of connection and rotation of the platter.
- C. The spindle is responsible for sending commands to the disk head.
- D. The actuator is responsible of moving the Read/Write arm.
Show answer and explanation ▾
Correct answer: A, D
The platters hold the data as magnetic patterns that represent binary values. The actuator moves the arm that carries the read/write heads across the platter surface.
Why the other options are wrong:
- B. The disk connector links the drive to the host interface and power, and does not rotate the platters.
- C. The spindle rotates the platters and does not send commands to the head.
Question 18
What statement about the SATA and SAS technologies is true?
- A. Both SATA and SAS are intelligent protocols with intelligent devices.
- B. Both use full-duplex communication.
- C. Both use serial communication.
- D. SATA and SAS support the same maximum number of devices on the bus.
Show answer and explanation ▾
Correct answer: C
Both SATA and SAS send data one bit at a time over serial links, which replaced the older parallel ATA and parallel SCSI interfaces.
Why the other options are wrong:
- A. SATA devices use the simpler ATA command set, while SAS carries the richer SCSI command set, so the two are not equally intelligent.
- B. SATA is half-duplex, while SAS is full-duplex.
- D. SAS supports far more devices than SATA through the use of expanders.
Question 19
Statement 1: We have a RAID5 protected group of disks. The protection level increases if we add more disks to the group.
Statement 2: With a RAID 10 set the number of disks must be greater than 8 to always survive a dual disk failure.
- A. Statement 1 is true and statement 2 is false.
- B. Statements 1 and 2 are both true.
- C. Both statements 1 and 2 are false.
- D. Statement 1 is false and statement 2 is true.
Show answer and explanation ▾
Correct answer: C
RAID 5 tolerates one disk failure however many disks are in the group, so adding disks does not raise the protection level. RAID 10 loses data when both disks of one mirror pair fail, whatever the disk count, so no number of disks guarantees survival of every dual failure.
Why the other options are wrong:
- A. Statement 1 is false, because adding disks to RAID 5 does not increase protection.
- B. Both statements are false, so neither can be marked true.
- D. Statement 2 is false, because RAID 10 can still fail when two disks in the same mirror pair are lost.
Question 20
When the RPO is minutes instead of hours the best backup method is traditional Tape backup.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
A recovery point objective of minutes needs copies made every few minutes, which calls for snapshots or replication. Tape backups run at long intervals and cannot meet such a short RPO.
Why the other options are wrong:
- A. Traditional tape backup cannot capture data often enough to meet an RPO of minutes.
Question 21
Which of the following methods provides the best RTO?
- A. Replication
- B. Disk-To-Tape
- C. Virtual Tape Library
- D. Disk-To-Disk-To-Tape
Show answer and explanation ▾
Correct answer: A
Replication keeps a ready-to-use copy of the data on a second storage system, so services can switch over to it almost immediately. No restore from backup media is needed, which gives the shortest recovery time.
Why the other options are wrong:
- B. Restoring from tape is slow, so disk-to-tape gives a long recovery time.
- C. A virtual tape library still requires a restore job before data can be used.
- D. Disk-to-disk-to-tape still requires a restore job before data can be used.
Question 22
The restore time objective (RTO) specifies the time needed to recover the data and servers after a disaster has occurred.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: B
The recovery time objective is the target time within which data and servers must be recovered and services resumed after a disaster.
Why the other options are wrong:
- A. The statement matches the definition of RTO, so it is not false.
Question 23
Given this scenario. A company wants replication of data between two data centers that are 2000 km apart.
Which replication method is most recommended?
- A. Synchronous but ONLY if the link is a high speed 8 Gb/s fiber optical connection.
- B. Asynchronous
- C. Synchronous
- D. Both Asynchronous and Synchronous will work.
Show answer and explanation ▾
Correct answer: B
Synchronous replication makes every host write wait for the remote site, and at 2000 km the round-trip delay is too high for applications. Asynchronous replication acknowledges writes locally and sends changes later, so it suits long distances.
Why the other options are wrong:
- A. Link speed does not remove the delay caused by distance, so synchronous replication is still unsuitable.
- C. Synchronous replication is limited to short distances because every write waits for the remote site.
- D. Synchronous replication is not practical over 2000 km.
Question 24
Which of the following is NOT the characteristics of the active-active mode of a storage controller?
- A. The primary controller processes the I/O requests from application servers and the secondary controller is in the idle state.
- B. The active-active mode achieves load balancing, full utilization of resources, and system performance improvement.
- C. Two controllers process the I/O requests from application servers concurrently.
- D. If a controller becomes faulty, the other takes over the work of the faulty controller without disrupting ongoing services.
Show answer and explanation ▾
Correct answer: A
In active-active mode both controllers process host I/O at the same time. One controller working while the other sits idle describes active-standby mode, so it is not an active-active characteristic.
Why the other options are wrong:
- B. This is an active-active characteristic, because both controllers share the load and all resources are used.
- C. This is an active-active characteristic, because both controllers serve I/O requests concurrently.
- D. This is an active-active characteristic, because the surviving controller takes over without disrupting services.
Question 25
Which is NOT the limitation of DAS, compared with SAN?
- A. Large investment
- B. Poor scalability
- C. Difficult resource sharing
- D. Decentralized management
Show answer and explanation ▾
Correct answer: A
Direct attached storage is cheap to start with because it needs no storage network, so large investment is not one of its limitations. Its weaknesses are poor scalability, difficult resource sharing and decentralized management.
Why the other options are wrong:
- B. Poor scalability is a real limitation of DAS.
- C. Difficult resource sharing is a real limitation of DAS, because storage is tied to one server.
- D. Decentralized management is a real limitation of DAS, because each server's storage is managed separately.
Question 26
It is a hard-disk failure that occurs when a read-write head of a hard disk drive comes in contact with its rotating platter, resulting in permanent and usually irreparable damage to the magnetic media on the platter surface.
Which of the following fits the above description?
- A. Electrical Failure.
- B. Bad Sector.
- C. Bad Platter Area.
- D. Head Crash.
Show answer and explanation ▾
Correct answer: D
A head crash happens when the read-write head touches the spinning platter. The contact scrapes the magnetic coating and usually destroys the data in that area permanently.
Why the other options are wrong:
- A. An electrical failure affects the drive's circuit board or power, not head to platter contact.
- B. A bad sector is a small unreadable area of the disk, not the event of the head striking the platter.
- C. A bad platter area describes damaged media, not the head contact that causes the damage.
Question 27
Which of the following items is NOT mandatory in a Fibre Channel SAN? (Choose all that apply.)
- A. Windows operating system
- B. Storage device
- C. Fibre Channel switch
- D. Fibre Channel HBA
Show answer and explanation ▾
Correct answer: A, C
A Fibre Channel SAN needs a storage device and hosts fitted with Fibre Channel HBAs. The hosts can run any supported operating system, and a host can connect to the storage directly in a point-to-point link without a switch.
Why the other options are wrong:
- B. A storage device is required, because it provides the capacity the SAN exists to share.
- D. A Fibre Channel HBA is required for a host to connect to the Fibre Channel network.
Question 28
Storage controllers can be separated from the chassis of disk enclosures. It does not need to be integrated in design with the disk enclosures.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
Storage systems come in two forms: controllers and disks integrated in one enclosure, or a separate controller enclosure cabled to disk enclosures. Integration with the disk enclosure is therefore not required.
Why the other options are wrong:
- B. Controllers do not have to be integrated with disk enclosures, since separate controller enclosures are a standard design.
Question 29
In a NAS environment entire files are sent across the Ethernet based network. The NAS server however stores these files in the form as SCSI blocks mostly on multiple disks using RAID protection.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: B
NAS clients exchange whole files over Ethernet using protocols such as NFS and CIFS. Inside the NAS device, the file system turns those files into block I/O on disks that are normally protected by RAID.
Why the other options are wrong:
- A. The statement is accurate, because a NAS device serves files on the network and stores them as blocks on its RAID protected disks.
Question 30
Statement 1: RAID 2.0+ offers better protection against data loss than traditional RAID and it performs much better.
Statement 2: To rebuild a RAID 2.0+ protected failed drive takes a lot of time as all drives are involved in the rebuild of the spare disk.
- A. Statement 1 is true; Statement 2 is false.
- B. Statement 1 and 2 are false.
- C. Statement 1 is false; Statement 2 is true.
- D. Statement 1 and 2 are true.
Show answer and explanation ▾
Correct answer: A
RAID 2.0+ spreads data and hot spare space across all disks in the disk domain, which improves both protection and performance. Because many disks take part in reconstruction at once, a rebuild is much faster, not slower.
Why the other options are wrong:
- B. Statement 1 is true, since RAID 2.0+ improves both protection and performance.
- C. Statement 1 is true and statement 2 is false, the reverse of this option.
- D. Statement 2 is false, because involving many disks shortens the rebuild.
Question 31
Statement 1:
The higher the number used to indicate the RAID level, the higher the overhead.
Statement 2: RAID 10 stripes the data, then mirrors the stripe set.
- A. Statements 1 and 2 are both true.
- B. Statement 1 is true and statement 2 is false.
- C. Statement 1 is false and statement 2 is true.
- D. Both statements 1 and 2 are false.
Show answer and explanation ▾
Correct answer: D
RAID level numbers are labels, not a measure of overhead: RAID 1 loses half its capacity while RAID 5 loses far less. RAID 10 mirrors disks first and then stripes across the mirrored pairs; striping first and then mirroring is RAID 01.
Why the other options are wrong:
- A. Neither statement is true.
- B. Statement 1 is false, because a higher RAID number does not mean higher overhead.
- C. Statement 2 is false, because RAID 10 mirrors first and then stripes.
Question 32
Which of the following statements about RAID 5 are correct? (Choose all that apply.)
- A. RAID 5 uses the XOR algorithm for parity.
- B. RAID 5 tolerates the failure of a maximum of two member disks without losing data.
- C. RAID 5 has fixed parity disks.
- D. RAID 5 writes data by stripes.
Show answer and explanation ▾
Correct answer: A, D
RAID 5 writes data in stripes across the member disks and calculates parity for each stripe with the XOR operation, which lets it rebuild the data of one failed disk.
Why the other options are wrong:
- B. RAID 5 tolerates the failure of only one member disk.
- C. RAID 5 distributes parity across all member disks and has no fixed parity disk.
Question 33
Statement 1:
A Solid State Disk drive can withstand strong vibrations.
Statement 2:
A Solid State Disk drive has only a few mechanical parts.
- A. Statement 1 is true; Statement 2 is false
- B. Statement 1 and 2 are false
- C. Statement 1 and 2 are true
- D. Statement 1 is false; Statement 2 is true
Show answer and explanation ▾
Correct answer: A
A solid state disk stores data in flash memory and has no moving mechanical parts at all. That is why it withstands strong vibration, and why the claim that it has a few mechanical parts is false.
Why the other options are wrong:
- B. Statement 1 is true, because an SSD tolerates strong vibration.
- C. Statement 2 is false, because an SSD has no mechanical parts.
- D. Statement 1 is true and statement 2 is false, the reverse of this option.
Question 34
In a clustered NAS architecture, which of the following allows multiple file system to be consolidated and does not need to be managed separately?
- A. Global Cache.
- B. Global Concurrency.
- C. Global Namespace.
- D. Global Sharing.
Show answer and explanation ▾
Correct answer: C
A global namespace presents the file systems of all nodes in a NAS cluster as one logical tree, so they are accessed and managed as a single file system instead of separately.
Why the other options are wrong:
- A. Global cache is not the feature that consolidates multiple file systems into one view.
- B. Global concurrency is not the feature that consolidates multiple file systems into one view.
- D. Global sharing is not the feature that consolidates multiple file systems into one view.
Question 35
What is the main purpose of hot swapping technology in disk enclosures?
- A. To be able to swap out the disks when the temperature is too hot.
- B. To swap out the hard disks after proper shutdown of storage system.
- C. Maintain the temperature of the disks to prevent overheating.
- D. To swap out the hard disks without turning off the storage system.
Show answer and explanation ▾
Correct answer: D
Hot swapping lets a hard disk be removed and replaced while the storage system stays powered on and keeps serving data, so a failed disk can be changed without downtime.
Why the other options are wrong:
- A. Hot swapping has nothing to do with disk temperature.
- B. Replacing disks after a shutdown is exactly what hot swapping makes unnecessary.
- C. Keeping disks from overheating is not the purpose of hot swapping.
Question 36
Which of the following are advantages of NAS storage systems over file servers? (Choose all that apply.)
- A. High data security
- B. Diverse services and powerful functions
- C. Large storage space
- D. High stability and reliability
Show answer and explanation ▾
Correct answer: A, C, D
A NAS device is a dedicated storage appliance with a purpose-built operating system, RAID protection and redundant components. Compared with a general-purpose file server it offers larger storage space, stronger data security, and higher stability and reliability.
Why the other options are wrong:
- B. Diverse services and broad functions describe a general-purpose file server, not a dedicated NAS device.
Question 37
In order to make full use of storage resources, on which tier are SSDs usually configured in a tiered storage system?
- A. Capacity tier
- B. Performance tier
- C. High-performance tier
- D. Offline storage
Show answer and explanation ▾
Correct answer: C
SSDs are the fastest and most expensive disks, so a tiered storage system places them in the high-performance tier, where the most frequently accessed data is kept.
Why the other options are wrong:
- A. The capacity tier uses large, low-cost NL-SAS disks for rarely accessed data.
- B. The performance tier is built from SAS disks.
- D. Offline storage holds archived data and is not where SSDs are placed.
Question 38
Which of the following statements about RAID 6 is incorrect?
- A. RAID 6 requires at least three member disks.
- B. Frequently used RAID 6 technologies include RAID 6 P+Q and RAID 6 DP.
- C. RAID 6 requires two-level parity.
- D. RAID 6 can recover data after two member disks fail.
Show answer and explanation ▾
Correct answer: A
RAID 6 keeps two independent sets of parity for every stripe, so it needs at least four member disks, not three.
Why the other options are wrong:
- B. This statement is accurate: RAID 6 P+Q and RAID 6 DP are the common RAID 6 implementations.
- C. This statement is accurate: RAID 6 calculates two independent sets of parity.
- D. This statement is accurate: RAID 6 can recover data after two member disks fail.
Question 39
A customer needs zoning configured in a Fibre Channel switch. The customer frequently changes the patch points in the infrastructure.
What zoning method is preferred then?
- A. Port zoning because it is more flexible when it comes to changing patch points.
- B. Soft zoning because it is more flexible when it comes to changing patch points.
- C. Zoning is not required in a FC SAN.
- D. Port zoning and Soft zoning should always be used together.
Show answer and explanation ▾
Correct answer: B
Soft zoning identifies zone members by WWN, so a device stays in its zone whichever switch port it is plugged into. That suits an environment where patch points change often.
Why the other options are wrong:
- A. Port zoning ties membership to physical switch ports, so it must be reconfigured whenever cabling changes.
- C. Zoning is used in a Fibre Channel SAN to control which devices can communicate.
- D. The two zoning methods do not have to be used together.
Question 40
A device can have one WWPN but multiple WWNN's.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
A Fibre Channel device has a single WWNN that identifies the node, and each of its ports has its own WWPN. One device can therefore have one WWNN and several WWPNs, not the other way around.
Why the other options are wrong:
- A. The statement reverses the relationship, because a node has one WWNN and may have many WWPNs.
Question 41
Select which of the following is not a property of Distributed Object Storage Architecture.
- A. Centralized nodes.
- B. Online expansion.
- C. Automatic load balancing.
- D. Global namespace.
Show answer and explanation ▾
Correct answer: A
Distributed object storage is decentralized: data and metadata are spread over peer nodes with no central node. That design is what enables online expansion, automatic load balancing and a global namespace.
Why the other options are wrong:
- B. Online expansion is a property of distributed object storage, since nodes can be added without interrupting service.
- C. Automatic load balancing is a property of distributed object storage.
- D. A global namespace is a property of distributed object storage.
Question 42
For all operating systems there is a specific version of Huawei UltraPath multipathing software.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: A
UltraPath versions are released only for the operating systems listed as supported, so not every operating system has its own version of the multipathing software.
Why the other options are wrong:
- B. UltraPath does not have a version for every operating system.
Question 43
Select the correct statements that describe the properties of Distributed Storage Architecture. (Choose all that apply.)
- A. The storage nodes are non centralized.
- B. Non concurrent I/O access.
- C. The storage nodes are centralized.
- D. Concurrent I/O access.
Show answer and explanation ▾
Correct answer: A, D
In a distributed storage architecture, data is spread across peer storage nodes with no central node, and clients can read and write to many nodes at the same time, which gives concurrent I/O access.
Why the other options are wrong:
- B. Distributed storage supports concurrent I/O across nodes.
- C. Centralized nodes describe traditional storage, not a distributed architecture.
Question 44
In storage systems, what does throughput refer to?
- A. Amount of signals that can be sent or received by processors in a period of time.
- B. Amount of calculations that can be processed in a period of time.
- C. Amount of data that can be received and written to the storage medium in a period of time.
- D. Amount of data that can be transmitted and received over network in a period of time.
Show answer and explanation ▾
Correct answer: C
In a storage system, throughput is the amount of data the system can receive and write to the storage medium in a given period of time, usually expressed in MB/s.
Why the other options are wrong:
- A. Signals handled by processors are not what storage throughput measures.
- B. The number of calculations processed describes computing power, not storage throughput.
- D. Data moved over the network is network throughput, not storage throughput.
Question 45
A backup set is a group of data that is backed up in a batch. A backup set can be used for either full backup or incremental backup.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
A backup set is the group of data backed up in one batch. Each full backup and each incremental backup produces its own backup set.
Why the other options are wrong:
- B. The statement is accurate, because both full and incremental backups produce backup sets.
Question 46
Which of the following is not a component of a backup system?
- A. Backup policy
- B. Backup media
- C. Backup server
- D. Backup software
Show answer and explanation ▾
Correct answer: A
A backup system is built from backup software, backup media and a backup server. A backup policy is a set of rules configured in the software, not a component of the system.
Why the other options are wrong:
- B. Backup media is a component, because it stores the backup data.
- C. The backup server is a component, because it runs and schedules the backup jobs.
- D. Backup software is a component, because it performs and manages the backups.
Question 47
In a good Disaster Recovery Plan there are no single points of failure, not even with any single person.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: B
A sound disaster recovery plan removes every single point of failure, including people. Recovery must not depend on one individual, so roles and knowledge are documented and shared.
Why the other options are wrong:
- A. The statement is accurate, because relying on one person is itself a single point of failure.
Question 48
In a RAID 5 group comprised of three disks, if 10110110 and 11010011 are written to the same stripe on the two data disks, respectively, 01100101 is calculated using the XOR function and then written to the parity disk.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
RAID 5 parity is the bitwise XOR of the data in the stripe. 10110110 XOR 11010011 gives 01100101, which is the value written as parity.
Why the other options are wrong:
- B. The XOR of the two data values is 01100101, so the statement is correct.
Question 49
Storage array is a network device used to switching network signals or data. It can provide a dedicated communication channel between any 2 nodes in the network that is connected.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: A
The description fits a network switch, which forwards signals and gives two connected nodes a dedicated channel. A storage array is a system of controllers and disks that stores data and presents it to hosts.
Why the other options are wrong:
- B. The statement describes a switch, not a storage array.
Question 50
Statement 1: NAS systems must be interconnected using fiber optic cables.
Statement 2:
A network protocol is the way in which an operating system accesses a file that is on a network connected device.
- A. Statement 1 is false and statement 2 is true.
- B. Statements 1 and 2 are both true.
- C. Statement 1 is true and statement 2 is false.
- D. Both statements 1 and 2 are false.
Show answer and explanation ▾
Correct answer: A
NAS systems connect over ordinary Ethernet, on copper or fiber cabling, so statement 1 is false. File access protocols such as NFS and CIFS are the means by which an operating system reaches files on a networked device, so statement 2 is true.
Why the other options are wrong:
- B. Statement 1 is false, because NAS does not require fiber optic cables.
- C. Statement 1 is false and statement 2 is true, the reverse of this option.
- D. Statement 2 is true, because network protocols are how an operating system accesses remote files.
Question 51
Which of the following statements about RAID 10 are correct? (Choose all that apply.)
- A. RAID 10 requires at least four member disks.
- B. In RAID 10, if two member disks in the RAID 1 group fail, data read proceeds normally.
- C. RAID 10 applies to scenarios with demanding requirements for speed and fault tolerance.
- D. Data is mirrored and then striped in RAID 10.
Show answer and explanation ▾
Correct answer: A, C, D
RAID 10 mirrors disks in pairs and then stripes data across the pairs, so it needs at least four member disks. It combines high speed with fault tolerance, which suits demanding workloads.
Why the other options are wrong:
- B. If both disks of the same RAID 1 pair fail, the data on that pair is lost and reads cannot proceed normally.
Question 52
It is a device which manages the physical disk drives and presents them to the users as logical units.
Which of the following device fits the above description?
- A. Host.
- B. Storage Controller.
- C. Storage Cache.
- D. Storage NIC.
Show answer and explanation ▾
Correct answer: B
The storage controller manages the physical disk drives, applies RAID, and presents the resulting capacity to hosts as logical units.
Why the other options are wrong:
- A. A host consumes the logical units; it does not manage the array's physical disks.
- C. Storage cache temporarily holds data to speed up I/O and does not manage disks.
- D. A network interface card provides connectivity and does not manage disks.
Question 53
Which of the following statements about the differences between DAS and SAN is incorrect?
- A. SAN uses the Fibre Channel or iSCSI protocol and therefore offers better scalability.
- B. DAS applies to small and medium LANs that have general storage capacity requirements and only a small number of servers.
- C. DAS and SAN are both external storage and can achieve storage resource sharing easily.
- D. SAN applies to mid-range and high-end storage application environments such as key databases, centralized storage, mass storage, backup, and disaster recovery.
Show answer and explanation ▾
Correct answer: C
DAS is attached directly to a single server, so its storage is hard to share among servers. Easy resource sharing is a property of SAN, which makes this statement the incorrect one.
Why the other options are wrong:
- A. This statement is accurate: SAN uses Fibre Channel or iSCSI and scales better than DAS.
- B. This statement is accurate: DAS suits small environments with few servers and modest capacity needs.
- D. This statement is accurate: SAN suits mid-range and high-end environments such as databases, backup and disaster recovery.
Question 54
Which of the following statements about switched fabric topology in Fibre Channel SANs is NOT true?
- A. The switches leverage zoning to manage network structure and provide the best interconnection form.
- B. Multiple pairs of nodes connecting to switches can communicate simultaneously.
- C. It is the most widely used topology that supports a maximum of 127 devices.
- D. The fault of one node in a zone does not affect services on nodes in other zones.
Show answer and explanation ▾
Correct answer: C
The limit of 127 devices belongs to the arbitrated loop topology. A switched fabric uses a far larger address space and supports many more devices.
Why the other options are wrong:
- A. This statement is accurate: fabric switches use zoning to manage which devices communicate.
- B. This statement is accurate: several pairs of nodes can communicate through a switch at the same time.
- D. This statement is accurate: zoning isolates a node fault from nodes in other zones.
Question 55
Which of the following is the common physical size division of the surface of the hard disk? (Choose all that apply.)
- A. Partition.
- B. Sector.
- C. Cylinder.
- D. Track.
Show answer and explanation ▾
Correct answer: B, C, D
A hard disk is physically organized into tracks, which are concentric circles on each platter surface, sectors, which divide each track, and cylinders, which are the tracks at the same position on all platters.
Why the other options are wrong:
- A. A partition is a logical division created by the operating system, not a physical division of the disk.
Question 56
Which of the following are existing Solid State Disk types? (Choose all that apply.)
- A. TLC
- B. SLC
- C. DLC
- D. eMLC
Show answer and explanation ▾
Correct answer: A, B, D
NAND flash SSDs are classed by bits stored per cell: SLC stores one, MLC and its enterprise variant eMLC store two, and TLC stores three.
Why the other options are wrong:
- C. DLC is not a NAND flash cell type.
Question 57
CIFS can be run on UDP as well as on TCP.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: B
CIFS is a transport-independent protocol. Over the NetBIOS over TCP/UDP transport, the NetBIOS services it relies on are mapped onto both TCP and UDP, so CIFS is not tied to TCP alone.
Why the other options are wrong:
- A. CIFS is not limited to TCP, because its NetBIOS transport maps services onto UDP as well.
Question 58
Which of the following storage devices are non-volatile? (Choose all that apply.)
- A. Hard Disk
- B. RAM
- C. Magnetic Tape
- D. DVD
Show answer and explanation ▾
Correct answer: A, C, D
Hard disks, magnetic tape and DVDs keep their contents when power is removed, because the data is held magnetically or optically on the medium.
Why the other options are wrong:
- B. RAM loses its contents as soon as power is removed, so it is volatile.
Question 59
Using RAID 2.0+ technology the rebuilding time, when a disk fails, is much shorter than with traditional RAID.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
RAID 2.0+ divides disks into small chunks and spreads hot spare space across many disks. When a disk fails, many disks take part in rebuilding its data in parallel, so reconstruction finishes much faster than a traditional rebuild onto a single hot spare disk.
Why the other options are wrong:
- B. Reconstruction with RAID 2.0+ is faster, not slower or equal, because many disks share the rebuild.
Question 60
The disadvantage of full backup is that it requires the last full backup and the most recent differential backup to fully restore data.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: A
A full backup contains every selected file, so a restore needs only that one backup. Needing the last full backup plus the most recent differential describes a differential backup scheme.
Why the other options are wrong:
- B. A full backup restores on its own and does not depend on a differential backup.
Question 61
The recovery point objective (RPO) is used to identify how much time lies between two backups.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: B
The RPO is the amount of data, measured in time, that a business can afford to lose. It therefore sets the longest interval allowed between two backups.
Why the other options are wrong:
- A. The RPO does define the acceptable time between backups, because data written after the last backup is what can be lost.
Question 62
What is included in every backup job? (Choose all that apply.)
- A. Backup type (full, incremental, differential).
- B. Retention period.
- C. Cost of Downtime.
- D. Application that uses the data.
Show answer and explanation ▾
Correct answer: A, B
Every backup job defines the type of backup to run, full, incremental or differential, and the retention period that states how long the backup copy is kept.
Why the other options are wrong:
- C. The cost of downtime is a planning input for the backup strategy, not a setting of a backup job.
- D. The application that uses the data is not a required part of a backup job definition.
Question 63
A differential backup holds all changes that were made since the last successful full backup.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
A differential backup copies everything that has changed since the last full backup, so each differential grows until the next full backup is taken.
Why the other options are wrong:
- B. Changes since the last full backup are exactly what a differential backup contains.
Question 64
Which of the following are functions of a NAS device? (Choose all that apply.)
- A. Provides interfaces to share files
- B. Provides interfaces to connect storage systems
- C. Provides a hardware platform to run NAS software
- D. Provides a large storage space
Show answer and explanation ▾
Correct answer: A, C, D
A NAS device supplies the hardware platform that runs the NAS software, offers a large storage space, and provides file sharing interfaces such as NFS and CIFS to clients.
Why the other options are wrong:
- B. Connecting storage systems to each other is not a function of a NAS device, which serves files to clients.
Question 65
SAS uses a point-to-point connection design to enable a dedicated link to be established between two devices in the communication.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
SAS is a serial point-to-point technology. Each link is a dedicated connection between two devices, which removes the shared bus contention of parallel SCSI.
Why the other options are wrong:
- B. SAS does use dedicated point-to-point links rather than a shared bus.
Question 66
The mount command is used in Linux-based clients to connect the client to the NFS share.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
A Linux client attaches an NFS share to a local directory with the mount command, after which the share is used like a local file system.
Why the other options are wrong:
- B. The mount command is the standard way for a Linux client to connect to an NFS share.
Question 67
A traditional RAID 10 set always has an even number of disks.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: B
RAID 10 stripes data across mirrored pairs. Every disk has a mirror partner, so the total number of disks is always even.
Why the other options are wrong:
- A. Mirrored pairs make an odd number of disks impossible in a traditional RAID 10 set.
Question 68
Statement 1: OceanStor Dorado systems are designed for high performance environments.
Statement 2: OceanStor Dorado systems are so-called All Flash Arrays.
- A. Statement 1 and 2 are true
- B. Statement 1 and 2 are false
- C. Statement 1 is true; Statement 2 is false
- D. Statement 1 is false; Statement 2 is true
Show answer and explanation ▾
Correct answer: A
OceanStor Dorado is the all-flash storage family in the Huawei intelligent storage portfolio. It uses SSDs only and is built for workloads that need high performance and low latency.
Why the other options are wrong:
- B. Both statements describe OceanStor Dorado correctly.
- C. Statement 2 is also true, because Dorado systems are all-flash arrays.
- D. Statement 1 is also true, because Dorado targets high-performance environments.
Question 69
You are tasked to setup a SAN storage system that has the following requirements: (1) To minimize the workload on server resources. (2) Optimize the capabilities on storage system for deduplication.
Select the following options that fits the scenario above. (Choose all that apply.)
- A. Usage of TCP/IP offload engine technology to do processing on HBA cards on the server to minimize the usage of server resources.
- B. Offload the storage processing tasks to the server to optimize the data deduplication.
- C. Adding hardware acceleration module to the storage system to optimize the performance of data deduplication.
- D. Use NIC instead of HBA cards to minimize the host resource consumption during I/O operations.
Show answer and explanation ▾
Correct answer: A, C
A TCP/IP offload engine handles protocol processing on the adapter instead of the server CPU, which reduces server workload. A hardware acceleration module in the storage system takes over the deduplication calculations and improves their performance.
Why the other options are wrong:
- B. Moving storage processing to the server increases the server workload instead of reducing it.
- D. A plain NIC leaves protocol processing to the host CPU, which raises host resource consumption.
Question 70
Which of the following statements are true for a NAS solution? (Choose all that apply.)
- A. CIFS and NFS are both commonly used protocols
- B. NAS clients are connected to the NAS server using Ethernet switches
- C. Cable length is around 10 m
- D. Block size is configurable
Show answer and explanation ▾
Correct answer: A, B
NAS serves files over an IP network: clients reach the NAS server through Ethernet switches and access the shares with file protocols, most commonly CIFS and NFS.
Why the other options are wrong:
- C. NAS runs over Ethernet and IP and is not limited to cable runs of about 10 m.
- D. A configurable block size is not a defining characteristic of a NAS solution, which serves files to clients.
Question 71
It is an electronic device controlled by a motor that moves the hard drive head arm.
Which of the following component fits the above description?
- A. Motor
- B. Actuator
- C. Spindle
- D. Platter
Show answer and explanation ▾
Correct answer: B
The actuator is the component that swings the head arm across the platters and positions the read/write heads over the required track.
Why the other options are wrong:
- A. The motor supplies the driving force, while the part that carries and positions the head arm is the actuator.
- C. The spindle holds and rotates the platters.
- D. The platter is the magnetic disk on which data is stored.
Question 72
The storage controller can only provide processing and caching functions.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: A
A storage controller does more than processing and caching. It also provides host and disk connectivity, manages RAID and storage resources, and runs the system management and data protection functions.
Why the other options are wrong:
- B. The controller's role is not limited to processing and caching.
Question 73
A zone in a FC switch determines which ports of the FC switch can be connected together.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
Zoning groups ports or WWNs on an FC switch. Only members of the same zone can communicate, so a zone determines which devices are allowed to connect to each other.
Why the other options are wrong:
- B. Controlling which ports can communicate is exactly the purpose of a zone.
Question 74
Host is a computing system consisting of hard drives or file system that can provide data access and storage.
- A. FALSE
- B. TRUE
Show answer and explanation ▾
Correct answer: B
A host is a computer system, such as an application server, that runs applications and uses its own disks or file system, together with storage presented to it, to access and store data.
Why the other options are wrong:
- A. The statement fits the definition of a host as a computing system that accesses and stores data.
Question 75
What does the term RPO mean?
- A. Return Purchase Order
- B. Restore Point Objective
- C. Recover Plan Objective
- D. Recovery Point Objective
Show answer and explanation ▾
Correct answer: D
RPO stands for Recovery Point Objective, the point in time to which data must be recoverable after a failure, which defines how much data loss is acceptable.
Why the other options are wrong:
- A. Return Purchase Order is not a data protection term.
- B. The term uses Recovery, not Restore.
- C. The term refers to a recovery point, not a recovery plan.
Question 76
Statement 1:
The retention period determines how many times per day a backup must be made.
Statement 2: Incremental backups take a lot of time to complete.
- A. Statement 1 is false; Statement 2 is true
- B. Statement 1 and 2 are true
- C. Statement 1 and 2 are false
- D. Statement 1 is true; Statement 2 is false
Show answer and explanation ▾
Correct answer: C
The retention period states how long a backup copy is kept, not how often backups run. Incremental backups copy only the data changed since the previous backup, so they complete quickly.
Why the other options are wrong:
- A. Statement 2 is false, because incremental backups are the fastest type to complete.
- B. Neither statement holds.
- D. Statement 1 is false, because retention is about how long backups are kept.
Question 77
All components of storage devices use the redundancy design to ensure system reliability. Redundant modules include controller modules, management modules, BBU modules, interface modules, power modules, and fan modules.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
Storage systems avoid single points of failure by deploying their main modules redundantly. Controller, management, BBU, interface, power and fan modules are duplicated, so the failure of one module does not stop the system.
Why the other options are wrong:
- B. Redundancy of these modules is a core part of storage system reliability design.
Question 78
Why storage systems have more than one storage controllers in the Dual Storage Controller Architecture?
- A. 2 controllers can complete a single I/O operation much faster.
- B. To have more energy savings since the performance is doubled.
- C. To provide redundancy in case of failure of a single controller.
- D. Single storage controller architecture is obsolete.
Show answer and explanation ▾
Correct answer: C
Two controllers remove the controller as a single point of failure. If one fails, the other takes over its services and the storage system stays online.
Why the other options are wrong:
- A. A second controller is not added to make a single I/O operation complete faster.
- B. A second controller is added for availability, not for energy savings.
- D. Redundancy, not obsolescence of single controllers, is the reason for the design.
Question 79
A snapshot is a point-in-time copy of the source data that serves as a data backup accessible to hosts.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: A
A snapshot is a fully usable copy of the source data as it was at one point in time. It can be mapped to hosts and used for backup, testing or recovery.
Why the other options are wrong:
- B. The statement matches the standard definition of a snapshot.
Question 80
A SAN always uses the same technology to connect to the infrastructure as a NAS.
- A. True
- B. False
Show answer and explanation ▾
Correct answer: B
A SAN provides block access and commonly uses Fibre Channel, with iSCSI and FCoE as alternatives, while a NAS provides file access over Ethernet and IP. The two do not always share the same connection technology.
Why the other options are wrong:
- A. A SAN often uses Fibre Channel, which a NAS does not use to serve its clients.
That was 80 of 443.
The full Huawei H13-611 HCIA-Storage pack has all 443 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 80 free as one PDF by email. Get the Half Pack →
About the H13-611 exam
These 80 Huawei H13-611 HCIA-Storage questions are free here, and as a free PDF by email.
They are drawn from the same bank as the full H13-611 pack, which has 443 questions in total.