Huawei H12-811 HCIA-Datacom Practice Questions with Explanations
Free Huawei H12-811 HCIA-Datacom practice questions. 43 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
H12-811 practice questions
Question 1
When a network administrator prepares to log in to a Huawei CloudEngine S series switch for the first time, the administrator cannot log in to the switch through the console port to access the CLI because the switch is in factory settings.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
The console port is the standard way to log in to a switch for the first time. A switch in factory settings accepts a local console connection, and the administrator sets the login password during that first session.
Why the other options are wrong:
- A. Factory settings do not block console login, which is the normal method for the first login.
Question 2
In TCP/IP-based end-to-end communication, only the source and destination hosts process the header information added at the transport layer.
The routers along the path will definitely not process this information.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
Routers normally forward on the IP header alone, but they can also read or rewrite the transport layer header. NAPT rewrites port numbers and advanced ACLs filter on TCP or UDP ports, so it is not true that routers will definitely never process it.
Why the other options are wrong:
- A. Routers running features such as NAPT or port-based ACLs do process the transport layer header.
Question 3
To prevent network congestion caused by loops, the IP header includes a TTL field. The source device sets the initial TTL value, which decreases by 1 each time the IP packet is forwarded by a Layer 2 or Layer 3 device.
When the TTL value reaches 0, the packet is discarded.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
TTL is a field in the IP header, so only devices that forward at Layer 3 reduce it by 1. A Layer 2 switch forwards frames by MAC address and does not change the IP header.
Why the other options are wrong:
- A. Layer 2 forwarding does not decrease TTL, so the statement is not accurate.
Question 4
PC1 is a DHCP client and obtains a dynamic IP address from the DHCP server (the IP address lease period is 24 hours). The DHCP server is subsequently powered off for more than a week due to a fault. In this case, PC1 can continue to use the previously assigned IP address throughout this period.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
A DHCP client may use its address only while the lease is valid. With the server down, PC1 cannot renew, and when the 24-hour lease runs out it must stop using the address, well before a week has passed.
Why the other options are wrong:
- A. The address cannot be used after the 24-hour lease expires without a successful renewal.
Question 5
Unlike distance-vector routing protocols, link-state routing protocols advertise link states instead of route information. Typical link-state routing protocols include RIP, OSPF, and IS-IS.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
OSPF and IS-IS are link-state routing protocols, but RIP is a distance-vector protocol that advertises routes with a hop count. Listing RIP as a link-state protocol makes the statement false.
Why the other options are wrong:
- A. RIP is a distance-vector protocol, so the list of link-state protocols in the statement is not correct.
Question 6
After the root bridge is elected on an STP network, which of the following parameters may be compared by ports on non-root bridge nodes to elect the root port? (Choose all that apply.)
- A. PID of a port on the device that sends BPDUs.
- B. PID of a port on the local device.
- C. BID of the device that sends BPDUs.
- D. Root path cost (RPC)
Show answer and explanation ▾
Correct answer: A, B, C, D
A non-root bridge picks its root port by comparing, in order, the root path cost, the bridge ID of the device that sent the BPDU, the port ID of the sending port, and finally the port ID of the local port. Each value is used only when the earlier ones tie.
Question 7
Which of the following can a DHCPv4 client obtain from a DHCPv4 server? (Choose all that apply.)
- A. IPv4 address
- B. DNS address
- C. Address lease
- D. Gateway address
Show answer and explanation ▾
Correct answer: A, B, C, D
A DHCPv4 server hands out an IPv4 address together with its lease time, and it can also supply network parameters such as the default gateway address and the DNS server address.
Question 8
If PC1 obtains an IPv6 address through SLAAC, which of the following is the network prefix length of the address that PC1 receives?
- A. 96
- B. 64
- C. 32
- D. 48
Show answer and explanation ▾
Correct answer: B
With SLAAC the host combines the prefix advertised in the RA message with a 64-bit interface ID that it generates itself. The prefix must therefore be 64 bits long.
Why the other options are wrong:
- A. A 96-bit prefix leaves only 32 bits, which is too short for the 64-bit interface ID that SLAAC uses.
- C. A 32-bit prefix is not the length SLAAC uses to form an address.
- D. A 48-bit prefix is a typical site allocation, not the prefix length a host receives for SLAAC.
Question 9
On the network 192.168.1.15/25, which of the following is the smallest IP address that can be assigned to a host?
- A. 192.168.1.127
- B. 192.168.1.120
- C. 192.168.1.1
- D. 192.168.1.255
Show answer and explanation ▾
Correct answer: C
With a /25 mask, 192.168.1.15 sits in the subnet 192.168.1.0 to 192.168.1.127. The first address is the network address and the last is the broadcast address, so the smallest host address is 192.168.1.1.
Why the other options are wrong:
- A. 192.168.1.127 is the broadcast address of this subnet and cannot be assigned to a host.
- B. 192.168.1.120 is a usable host address but not the smallest one.
- D. 192.168.1.255 lies outside the 192.168.1.0/25 subnet.
Question 10
Which of the following IP addresses cannot be configured for a host by default?
- A. 192.168.1.1/24
- B. 10.0.0.1/8
- C. 224.0.0.1/24
- D. 172.16.1.1/16
Show answer and explanation ▾
Correct answer: C
224.0.0.1 is a Class D address. The range 224.0.0.0 to 239.255.255.255 is reserved for multicast groups, so it cannot be configured as the address of a host interface.
Why the other options are wrong:
- A. 192.168.1.1/24 is a normal Class C host address.
- B. 10.0.0.1/8 is a normal Class A host address.
- D. 172.16.1.1/16 is a normal Class B host address.
Question 11
Which of the following is not a type of OSPF packets?
- A. LSAck
- B. LSU
- C. Hello
- D. LSA
Show answer and explanation ▾
Correct answer: D
OSPF has five packet types: Hello, Database Description, Link State Request, Link State Update and Link State Acknowledgment. An LSA is the link-state information carried inside those packets, not a packet type itself.
Why the other options are wrong:
- A. LSAck is the OSPF packet that acknowledges received LSAs.
- B. LSU is the OSPF packet that carries LSAs to neighbors.
- C. Hello is the OSPF packet that discovers and maintains neighbor relationships.
Question 12
AAA adopts the client/server architecture.
Which of the following protocols is not supported between the client and the server?
- A. MD5
- B. HWTACACS
- C. LDAP
- D. RADIUS
Show answer and explanation ▾
Correct answer: A
MD5 is a hash algorithm, not a protocol for exchanging authentication, authorization and accounting information. AAA clients talk to AAA servers using protocols such as RADIUS, HWTACACS and LDAP.
Why the other options are wrong:
- B. HWTACACS is an AAA protocol used between the client and the server.
- C. LDAP is supported for authentication between the client and the server.
- D. RADIUS is the most widely used AAA protocol between the client and the server.
Question 13
R1 has the following configurations: [R1] acl 3000 [R1-acl4-advance-3000] rule 5 deny ip source 10.0.1.1 0.7.0.0 [R1-acl4-advance-3000] rule 30 permit ip [R1-acl4-advance-3000] quit Packets with which of the following source IP addresses can match rule 30? (Choose all that apply.)
- A. 10.5.1.1
- B. 10.10.1.1
- C. 10.4.0.0
- D. 10.6.1.1
Show answer and explanation ▾
Correct answer: B, C
The wildcard 0.7.0.0 makes rule 5 match sources 10.0.1.1 through 10.7.1.1, where only the low three bits of the second octet may vary. 10.10.1.1 has a second octet outside 0 to 7 and 10.4.0.0 does not end in 1.1, so both skip rule 5 and match rule 30.
Why the other options are wrong:
- A. 10.5.1.1 has a second octet within 0 to 7 and ends in 1.1, so it matches rule 5 first and is denied.
- D. 10.6.1.1 has a second octet within 0 to 7 and ends in 1.1, so it matches rule 5 first and is denied.
Question 14
Secure Shell (SSH) is a protocol that uses encryption and authentication mechanisms to implement network services (such as secure access and file transfer) securely over an insecure network.
Which of the following protocols use SSH? (Choose all that apply.)
- A. SFTP
- B. DNS
- C. STelnet
- D. NETCONF
Show answer and explanation ▾
Correct answer: A, C, D
SFTP provides secure file transfer over SSH, STelnet provides secure remote login over SSH, and NETCONF uses SSH as its secure transport for network management sessions.
Why the other options are wrong:
- B. DNS resolves domain names and does not run over SSH.
Question 15
Which of the following NAT modes translates the destination IP address of an IP packet?
- A. NAT Server
- B. Easy IP
- C. NAPT
- D. No-PAT
Show answer and explanation ▾
Correct answer: A
NAT Server maps a public address and port to an internal server. When an outside user sends a packet to the public address, the device translates the destination IP address to the server's private address.
Why the other options are wrong:
- B. Easy IP translates the source address of outgoing packets to the address of the outbound interface.
- C. NAPT translates the source address and port of outgoing packets.
- D. No-PAT translates only the source address of outgoing packets, one to one.
Question 16
R1 has the following configurations:
[R1] nat server for_telnet protocol tcp global 100.0.23.2 telnet inside 192.168.1.1 telnet
When a public network user and 100.0.23.2 are reachable, the public network user can run the telnet 192.168.1.1 command to log in to 192.168.1.1.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
The NAT server entry publishes the internal host through the global address 100.0.23.2. A public network user has no route to the private address 192.168.1.1, so the user must run telnet 100.0.23.2, and R1 then translates the destination to 192.168.1.1.
Why the other options are wrong:
- A. The private address 192.168.1.1 is not reachable from the public network, so the user has to telnet to the global address instead.
Question 17
On an intelligent computing data center network, various intelligent lossless network technologies are used to ensure zero packet loss. The working mechanism of the lossless technology PFC is as follows: When the packet buffer at the data receive end reaches the backpressure threshold, the receive end sends PFC frames to the transmit end, instructing the transmit end to stop sending packets.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
PFC is a backpressure mechanism. When the receive buffer for a priority queue reaches the threshold, the receiver sends a PFC pause frame upstream, and the sender stops transmitting on that priority so the buffer does not overflow and no packets are lost.
Why the other options are wrong:
- B. The statement describes how PFC works, so it is not false.
Question 18
The emergence of AI poses new requirements on data center networks. To meet AI computing requirements, a high-speed intelligent computing data center network with zero packet loss needs to be constructed.
Which of the following statements are false about the requirements and solutions of intelligent computing data center networks? (Choose all that apply.)
- A. Due to large-scale data synchronization services on the intelligent computing network, a single port must have a high bandwidth (200G/400G).
- B. Lossless technologies such as PFC and ECN are used on the intelligent computing network to implement a network with zero packet loss.
- C. The RDMA protocol stack is used on the intelligent computing network to reduce the transmission latency between GPU servers and physical switches.
- D. Measures such as single-port ultimate bandwidth and lossless network technologies can be used to achieve a network with close to zero packet loss, but not a truly lossless network.
Show answer and explanation ▾
Correct answer: C, D
RDMA lets an application on one server read and write the memory of another server directly and bypass the kernel protocol stack, so it cuts the data processing latency of the servers, not the transmission latency between a GPU server and a switch. Lossless technologies such as PFC and ECN deliver zero packet loss, so a truly lossless network is achievable.
Why the other options are wrong:
- A. High-bandwidth 200G and 400G ports are a real requirement of intelligent computing networks, so this statement is not false.
- B. PFC and ECN are the lossless technologies used to reach zero packet loss, so this statement is not false.
Question 19
In the leader AP networking architecture, the leader AP functions as a WAC and uses the CAPWAP protocol to uniformly manage and configure Fit APs.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
In leader AP networking, one AP works in leader mode and takes over the WAC role for a small network. It manages and configures the Fit APs centrally over CAPWAP, so no separate WAC is needed.
Why the other options are wrong:
- B. The statement describes the leader AP architecture, so it is not false.
Question 20
IEEE 802.11 is the standard for WLANs.
Which of the following 802.11 protocols uses 1024-QAM modulation?
- A. 802.11n
- B. 802.11be
- C. 802.11ac
- D. 802.11ax
Show answer and explanation ▾
Correct answer: D
802.11ax, known as Wi-Fi 6, raised the highest modulation order to 1024-QAM, which carries 10 bits per symbol.
Why the other options are wrong:
- A. 802.11n supports modulation up to 64-QAM.
- B. 802.11be raises the highest modulation order to 4096-QAM.
- C. 802.11ac supports modulation up to 256-QAM.
Question 21
In the Layer 3 in-path WLAN networking, the WAC and Fit APs are connected at Layer 3. APs can obtain the WAC’s address through broadcast or DHCP.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
Broadcast packets do not cross a Layer 3 boundary, so an AP that is connected to the WAC at Layer 3 cannot find it by broadcast. In Layer 3 networking the AP learns the WAC address through DHCP or DNS, or from a static configuration.
Why the other options are wrong:
- A. Broadcast discovery works only when the AP and WAC are in the same Layer 2 network.
Question 22
When configuring WLAN services on a Huawei WAC, the profile-based configuration mode is used. Different WLAN profiles are designed for various service functions, and these profiles reference each other to take effect.
Which of the following statements is false about the reference relationships between WLAN profiles?
- A. An authentication profile can be referenced in a VAP profile.
- B. A security profile can be referenced in an SSID profile.
- C. An SSID profile can be referenced in a VAP profile.
- D. An air scan profile can be referenced in a radio profile.
Show answer and explanation ▾
Correct answer: B
A security profile is referenced in a VAP profile, not in an SSID profile. The VAP profile is the one that binds the SSID profile, the security profile and the authentication profile together.
Why the other options are wrong:
- A. An authentication profile is referenced in a VAP profile, so this statement is true.
- C. An SSID profile is referenced in a VAP profile, so this statement is true.
- D. An air scan profile is referenced in a radio profile, so this statement is true.
Question 23
Which of the following protocols can be used to modify the configuration of a network device? (Choose all that apply.)
- A. NETCONF
- B. Syslog
- C. RESTCONF
- D. SNMP
Show answer and explanation ▾
Correct answer: A, C, D
NETCONF and RESTCONF both provide operations for editing device configuration data, and SNMP can change configuration values through its Set operation.
Why the other options are wrong:
- B. Syslog only sends log messages from a device to a log server and cannot change the configuration.
Question 24
Which of the following statements are true about NETCONF and SNMP? (Choose all that apply.)
- A. Both NETCONF and SNMP can use SSH as the transport protocol.
- B. NETCONF can operate on the MIB databases of network devices.
- C. SNMP does not provide a protection or locking mechanism, and conflicts may occur when multiple users operate on the same object.
- D. NETCONF uses XML encoding.
Show answer and explanation ▾
Correct answer: C, D
NETCONF encodes its messages in XML and offers a lock operation on configuration datastores. SNMP has no such locking, so two users changing the same object at the same time can conflict.
Why the other options are wrong:
- A. SNMP runs over UDP, not SSH.
- B. NETCONF operates on configuration datastores described by YANG models, while MIBs are the data model that SNMP uses.
Question 25
Given the following Python code, the output of print(Test) is the same as that of print(test).
Test = ‘Hello World’ test = ‘hello world’
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
Python is case sensitive, so Test and test are two separate variables. They hold different strings, so print(Test) outputs Hello World and print(test) outputs hello world.
Why the other options are wrong:
- A. The two variables are different and hold strings with different capitalization, so the two outputs are not the same.
Question 26
Network administrators need to manage and maintain the devices on the campus network.
Which of the following protocols cannot modify device configurations, such as interface IP addresses, device names, etc.?
- A. SNMP
- B. SFTP
- C. STelnet
- D. NETCONF
Show answer and explanation ▾
Correct answer: B
SFTP is a secure file transfer protocol. It uploads and downloads files but has no way to issue configuration changes such as setting an interface IP address or a device name.
Why the other options are wrong:
- A. SNMP can change device settings through its Set operation.
- C. STelnet gives a secure command line session where any configuration command can be run.
- D. NETCONF is designed to install and edit device configuration.
Question 27
Which of the following commands can an administrator run to specify the configuration file for the next startup?
- A. startup system-software
- B. startup saved-configuration
- C. reset factory-configuration
- D. reset saved-configuration
Show answer and explanation ▾
Correct answer: B
The startup saved-configuration command names the configuration file that the device loads at its next startup.
Why the other options are wrong:
- A. startup system-software sets the system software file for the next startup, not the configuration file.
- C. reset factory-configuration restores the device to its factory settings.
- D. reset saved-configuration clears the saved configuration file instead of selecting one.
Question 28
An enterprise’s network switch has security vulnerabilities because its version is too early. The administrator wants to upload a patch file through FTP to fix the vulnerabilities.
Which of the following files is a patch file that can be uploaded by the administrator?
- A. test.cc
- B. test.pat
- C. test.cfg
- D. test.zip
Show answer and explanation ▾
Correct answer: B
Patch files on Huawei devices use the .pat extension, so test.pat is the file the administrator can upload and load as a patch.
Why the other options are wrong:
- A. The .cc extension is used for system software files.
- C. The .cfg extension is used for configuration files.
- D. The .zip extension is used for compressed files such as configuration files, not for patches.
Question 29
If host A wants to communicate with host B, which is on another subnet, host A broadcasts an ARP request to obtain host B’s MAC address. After receiving the request, host B replies with an ARP response to notify host A of its MAC address.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
An ARP broadcast stays inside its own subnet and never reaches host B. To reach another subnet, host A sends an ARP request for its default gateway, gets the gateway's MAC address and sends the packet to the gateway.
Why the other options are wrong:
- A. Host B is on another subnet and does not receive the ARP broadcast, so it cannot reply with its MAC address.
Question 30
The administrator configures an Eth-Trunk in LACP mode between two switches, and sets the maximum number of active links in the Eth-Trunk to 3 and the number of remaining standby links to 1. If one of the active links fails, the two switches automatically adjust the number of active links to 2 through negotiation, and the standby link remains in the standby state.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
In LACP mode a standby link exists to replace a failed active link. When one active link fails, the standby link is selected and becomes active, so the Eth-Trunk still has 3 active links.
Why the other options are wrong:
- A. The standby link takes over for the failed link, so it does not stay in the standby state and the number of active links does not drop to 2.
Question 31
R1 has four static routes, each of which has a reachable next hop. Given this static route configuration, what is the next hop of the route to 20.0.0.0/30 in R1’s routing table?
[R1] ip route-static 20.0.0.0 30 10.1.1.2 [R1] ip route-static 20.0.0.0 30 10.1.2.2 preference 70 [R1] ip route-static 20.0.0.0 30 10.1.3.2 preference 100 [R1] ip route-static 20.0.0.0 30 10.1.4.2 preference 50
- A. 10.1.4.2
- B. 10.1.2.2
- C. 10.1.1.2
- D. 10.1.3.2
Show answer and explanation ▾
Correct answer: A
When several routes lead to the same destination, the one with the lowest preference value is installed. The route through 10.1.4.2 has preference 50, which is lower than the default static preference of 60 and the configured values of 70 and 100.
Why the other options are wrong:
- B. The route through 10.1.2.2 has preference 70, which is higher than 50.
- C. The route through 10.1.1.2 uses the default static preference of 60, which is higher than 50.
- D. The route through 10.1.3.2 has preference 100, the least preferred of the four.
Question 32
The IPv6 header is also called a fixed header, which contains eight fields. The total length of the fixed header is 40 bytes.
Which of the following fields does an IPv6 header include? (Choose all that apply.)
- A. Source IPv6 address
- B. Hop Limit
- C. Next Header
- D. Source MAC address
Show answer and explanation ▾
Correct answer: A, B, C
The eight fields of the IPv6 fixed header are Version, Traffic Class, Flow Label, Payload Length, Next Header, Hop Limit, Source Address and Destination Address.
Why the other options are wrong:
- D. A source MAC address belongs to the Ethernet frame header at the data link layer, not to the IPv6 header.
Question 33
In an IPv6 address, two or more consecutive groups of 0s can be compressed using a double colon (::), reducing the overall length of the address.
For example, 2001:DBFF:130F:0:0:0:0:130B can be compressed to 2001:DBFF:130F::130B.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
A run of two or more consecutive all-zero groups in an IPv6 address can be replaced once with a double colon. The four zero groups in 2001:DBFF:130F:0:0:0:0:130B collapse to give 2001:DBFF:130F::130B, which is the same address in shorter form.
Why the other options are wrong:
- B. The compression shown follows the IPv6 double colon rule correctly, so the statement is not false.
Question 34
Which of the following DHCPv4 messages are sent by a DHCPv4 server? (Choose all that apply.)
- A. DHCP ACK
- B. DHCP DISCOVER
- C. DHCP REQUEST
- D. DHCP OFFER
Show answer and explanation ▾
Correct answer: A, D
A DHCPv4 server replies to a client's DHCP DISCOVER with a DHCP OFFER that proposes an address, and it confirms the lease with a DHCP ACK after the client requests that address. Both messages travel from the server to the client.
Why the other options are wrong:
- B. DHCP DISCOVER is broadcast by the client to locate DHCP servers.
- C. DHCP REQUEST is sent by the client to request or renew the offered address.
Question 35
Defining OSPF areas in a large network helps reduce the size of the LSDB maintained by each router. If both R1 and R2 are assigned to area 1, they have the same LSDB within that area.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
Dividing an OSPF network into areas limits detailed link-state flooding to each area, so every router keeps a smaller LSDB. All routers in the same area synchronize their LSAs, so R1 and R2 hold identical LSDBs for area 1.
Why the other options are wrong:
- B. Routers in the same OSPF area synchronize to an identical LSDB for that area, so the statement is not false.
Question 36
If the neighbor relationship between R1 and R2 has reached the Full state, which of the following statements are true? (Choose all that apply.)
- A. R1 and R2 have different router IDs.
- B. R1 and R2 have the same LSDB in the same area.
- C. R1 and R2 belong to the same area.
- D. R1 and R2 use the same process ID.
Show answer and explanation ▾
Correct answer: A, B, C
Two OSPF routers form an adjacency only when their router IDs are unique and their connecting interfaces are in the same area. Reaching the Full state means the routers have finished exchanging LSAs, so their LSDBs for that area are identical.
Why the other options are wrong:
- D. The OSPF process ID is only locally significant, so two neighbors can reach the Full state with different process IDs.
Question 37
Which of the following hosts are reachable to the host at 192.168.1.200/27 at Layer 2? (Choose all that apply.)
- A. 192.168.1.192/27
- B. 192.168.1.193/27
- C. 192.168.1.221/27
- D. 192.168.1.222/27
Show answer and explanation ▾
Correct answer: B, C, D
A /27 mask creates blocks of 32 addresses, so 192.168.1.200 sits in the 192.168.1.192 subnet with usable hosts 192.168.1.193 to 192.168.1.222. Hosts at .193, .221 and .222 are in that same subnet and reach it directly at Layer 2.
Why the other options are wrong:
- A. 192.168.1.192 is the network address of the subnet and cannot be assigned to a host.
Question 38
An administrator attempts to add the following rule to ACL 2001 on R1:
[R1] acl 2001 [R1-acl4-basic-2001] rule deny tcp destination port eq telnet source 192.168.1.3.0 destination 192.168.2.0.0.0.0.255 In this case, the rule cannot be configured successfully.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
ACL 2001 is a basic ACL, and basic ACL rules match only on the source IP address. Protocol type, destination address and destination port are advanced ACL criteria, so a rule that uses them is rejected in the basic ACL view.
Why the other options are wrong:
- B. A basic ACL does not accept protocol, destination address or port parameters, so the rule cannot be configured.
Question 39
The following ACL rule is configured on R1: [R1] time-range working-time 8:00 to 18:00 working-day [R1] acl name work-acl basic [R1-acl4-basic-work-acl] rule deny source 192.168.1.0 0.0.0.255 time-range working-time [R1-acl4-basic-work-acl] quit According to the rule, hosts with source IP addresses on network segment 192.168.1.0/24 match the rule from 8:00 to 18:00 on workdays.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
The time range working-time is active from 8:00 to 18:00 on working days, Monday to Friday. Because the rule references that time range, packets sourced from 192.168.1.0/24 match the deny rule only during those hours.
Why the other options are wrong:
- B. The rule is bound to the working-time range and the source wildcard covers 192.168.1.0/24, so the statement is not false.
Question 40
When source NAT is configured on an enterprise egress device, which of the following may prevent intranet users from accessing the public network? (Choose all that apply.)
- A. The NAT function is not enabled on the device’s outbound interface connected to the public network.
- B. No route to the intranet address is configured on the public network router.
- C. No IP address is available in the NAT address pool.
- D. The IP address of an intranet user is out of the IP address range specified in the NAT policy.
Show answer and explanation ▾
Correct answer: A, C, D
Source NAT works only when it is applied on the outbound interface facing the public network, when the address pool still has a free address, and when the user's address falls within the range the NAT policy matches. A failure in any of these leaves the private address untranslated and public access fails.
Why the other options are wrong:
- B. Public routers do not need routes to intranet addresses, because source NAT replaces the private source address with a public one.
Question 41
R1 has the following configurations: [R1] aaa [R1-aaa] authentication-scheme auth1 [R1-aaa-authen-auth1] authentication-mode radius local [R1-aaa-authen-auth1] quit According to the preceding information. Assume that R1 is properly connected to the RADIUS server. When a user accesses R1, R1 first performs RADIUS authentication on the user. If the RADIUS server sends an authentication failure message to R1, R1 then performs local authentication on the user.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
With authentication-mode radius local, R1 falls back to local authentication only when the RADIUS server does not respond. If the server replies with an authentication failure, the user is rejected and local authentication is not attempted.
Why the other options are wrong:
- A. Local authentication is the backup for an unresponsive RADIUS server, not for a failure reply from the server.
Question 42
The following command is configured on the VTY interfaces of R1.
[R1-ui-vty0-4] protocol inbound all In this case, FTP, Telnet, and SSH users can all use the five VTY interfaces.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
The protocol inbound all command lets the VTY user interfaces accept both Telnet and SSH logins. FTP users do not log in through VTY user interfaces, so the statement that FTP users can use the five VTY interfaces is incorrect.
Why the other options are wrong:
- A. The command covers the Telnet and SSH login protocols on VTY, not FTP access.
Question 43
With the continuous update and development of data center services, the architecture of general-purpose computing data center networks is also evolving. A cloud-based data center uses a cloud platform to centrally integrate resources and deliver compute, storage, and network services.
Which of the following network architectures is used by such a data center?
- A. M-LAG + Eth-Trunk
- B. Spine-Leaf + VXLAN
- C. PEC + ECN
- D. STP + VRRP
Show answer and explanation ▾
Correct answer: B
Cloud-based data centers use a spine-leaf physical fabric with VXLAN as the overlay. The fabric gives scalable, equal-cost forwarding between any two leaf switches, and VXLAN builds large Layer 2 virtual networks over it so the cloud platform can pool and deliver compute, storage and network resources.
Why the other options are wrong:
- A. M-LAG and Eth-Trunk provide link and device redundancy, not the fabric and overlay architecture of a cloud-based data center.
- C. ECN is a congestion control mechanism for lossless transport, not a data center network architecture.
- D. STP and VRRP belong to the traditional loop prevention and gateway backup design that cloud data centers moved away from.
That was 43 of 181.
The full Huawei H12-811 HCIA-Datacom pack has all 181 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 64 free as one PDF by email. Get the Half Pack →
About the H12-811 exam
These 43 Huawei H12-811 HCIA-Datacom questions are free here. The free PDF has 64, free by email.
They are drawn from the same bank as the full H12-811 pack, which has 181 questions in total.