Huawei H11-861 Practice Questions with Explanations
Free Huawei H11-861 practice questions. 20 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
H11-861 practice questions
Question 1
The VDC can be used with the Huawei video conferencing platform to provide rich conference control functions. Conference control settings can be customized, and conference control shortcut keys and descriptions can be set.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
The statement is correct: the VDC works with Huawei's video conferencing platform and adds conference control functions, including custom settings and shortcut keys.
Why the other options are wrong:
- B. FALSE is wrong because the statement matches how the VDC conference control function is described.
Question 2
By default, a single registration SC server supports a maximum of 20,000 registered devices.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
The statement is correct: by default one registration SC server supports up to 20,000 registered devices, so larger fleets need more servers.
Why the other options are wrong:
- B. FALSE is wrong because 20,000 is the default registration limit for one SC server.
Question 3
Which of the following is the maximum number of cascaded conference levels supported by the SMC?
- A. 8
- B. 4
- C. 2
- D. 6
Show answer and explanation ▾
Correct answer: B
The SMC supports cascaded conference levels up to a maximum of 4, so a conference tree deeper than four levels is not possible.
Why the other options are wrong:
- A. 8 is more cascade levels than the SMC supports.
- C. 2 is fewer than the maximum of 4 levels the SMC supports.
- D. 6 is more cascade levels than the SMC supports.
Question 4
Which of the following network elements can be utilized to centrally manage and control, remotely schedule shutdowns, and perform batch OTA upgrades for 10,000 IdeaHub ES2 Plus devices?
- A. iManager U2000
- B. IdeaManager
- C. eSight
- D. SMC
Show answer and explanation ▾
Correct answer: B
IdeaManager is the management platform for IdeaHub devices. It can centrally manage large numbers of them, schedule remote shutdowns and push batch OTA upgrades.
Why the other options are wrong:
- A. iManager U2000 is a network management system for transport equipment, not IdeaHub device management.
- C. eSight manages network and IT devices in general, but it is not the IdeaHub fleet manager.
- D. SMC controls conferences, not the shutdown schedule and OTA upgrades of IdeaHub devices.
Question 5
In the collaboration solution architecture, which of the following network elements are deployed at the media processing layer? (Choose all that apply.)
- A. SMC
- B. VP9860
- C. CloudRSE
- D. Box 310
Show answer and explanation ▾
Correct answer: B, C
The media processing layer holds the devices that handle the audio and video streams themselves. The VP9860 is the MCU that mixes and switches conference media, and CloudRSE records and streams conferences, so both sit at this layer.
Why the other options are wrong:
- A. SMC manages and schedules conferences and devices, so it is a management platform, not a media processing device.
- D. Box 310 is a room endpoint used by participants, not a media processing device.
Question 6
Which of the following statements are true about the multi-level protection of the collaboration hardware platform? (Choose all that apply.)
- A. Network port backup is provided.
- B. Fan backup is provided.
- C. Power supply backup is provided.
- D. Disk backup (RAID) is provided.
Show answer and explanation ▾
Correct answer: A, B, C, D
The collaboration hardware platform protects against single component failures at several levels: redundant network ports, redundant fans, redundant power supplies and RAID protection for the disks. All four statements describe that multi-level protection.
Question 7
Assume that a dual-channel audio file uses the PCM encoding, the sampling frequency is 8 kHz, and each quantized sample value corresponds to an 8-bit binary code.
What is the encoding rate (kbit/s) of the audio file?
- A. 128
- B. 256
- C. 64
- D. 196
Show answer and explanation ▾
Correct answer: A
The PCM rate is the sampling frequency times the bits per sample times the number of channels: 8,000 x 8 x 2 = 128,000 bit/s, which is 128 kbit/s.
Why the other options are wrong:
- B. 256 kbit/s would need four channels or 16-bit samples at 8 kHz.
- C. 64 kbit/s is the rate of a single channel, and this file has two.
- D. 196 kbit/s does not result from 8 kHz, 8 bits and two channels.
Question 8
Generally, the bandwidth actually occupied by a video conference is greater than the conference bandwidth.
What are the possible causes?
(Choose all that apply.)
- A. IP packet headers occupy some bandwidth.
- B. Retransmission of lost packets occupies some bandwidth.
- C. Signaling interaction data occupies some bandwidth.
- D. UDP packet headers occupy some bandwidth.
Show answer and explanation ▾
Correct answer: A, B, C, D
The conference bandwidth counts only the media payload. On the network, every packet also carries IP and UDP headers, lost packets may be retransmitted, and signaling messages are exchanged, so all four items add to the bandwidth actually used.
Question 9
Assume that a channel of 4CIF analog TV signal uses a 48-bit color depth.
Which of the following is nearest to the stream transmission speed of the signal before compression and encoding?
- A. 238 Mbit/s
- B. 557 Mbit/s
- C. 446 Mbit/s
- D. 600 Mbit/s
Show answer and explanation ▾
Correct answer: D
4CIF is 704 x 576 pixels. At 48 bits per pixel and 30 frames per second, the raw stream is 704 x 576 x 48 x 30, about 584 Mbit/s, and 600 Mbit/s is the nearest value listed.
Why the other options are wrong:
- A. 238 Mbit/s is far below the raw rate of a 4CIF signal with 48-bit color.
- B. 557 Mbit/s is further from the calculated 584 Mbit/s than 600 Mbit/s is.
- C. 446 Mbit/s is well below the calculated 584 Mbit/s.
Question 10
Currently, the widely used video compression standards include H.263, H.264, H.265, MPEG-1, MPEG-2, and MPEG-4. The H.26X series standards are mainly used for real time video communication, and the MPEG series standards are mainly used for video storage (DVD), video broadcast, and video streaming media.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
The H.26x standards come from the ITU-T and were designed for real-time video communication such as video conferencing. The MPEG standards come from ISO/IEC and target storage, broadcast and streaming, for example MPEG-2 on DVD and digital TV.
Why the other options are wrong:
- B. The statement describes the two families of standards correctly, so it is not false.
Question 11
Which of the following statements is true about image sampling?
- A. The YUV 4:2:0 sampling mode is half the size of the YUV 4:4:4 sampling mode.
- B. For human eyes, the Y component in YUV is the most important. Therefore, downsampling can be performed on the UV components.
- C. RGB components have weak correlation, which is unfavorable for video image compression. Therefore, RGB is often used for image display.
- D. The transmission rate of video data using YUV 4:2:0 is 140 Mbit/s. If the 4:2:2 mode is used, the transmission rate required by the video is 175 Mbit/s.
Show answer and explanation ▾
Correct answer: A
YUV 4:4:4 keeps three samples per pixel. YUV 4:2:0 keeps the full Y samples but only a quarter of the U and V samples, an average of 1.5 samples per pixel, so the data is half the size.
Why the other options are wrong:
- B. The eye is more sensitive to brightness than to color, which is a matter of sensitivity and not of one component being the most important.
- C. RGB components are strongly correlated, not weakly correlated, which is why video is converted to YUV before compression.
- D. 4:2:2 carries 2 samples per pixel against 1.5 for 4:2:0, so 140 Mbit/s becomes about 187 Mbit/s, not 175 Mbit/s.
Question 12
Which of the following header fields is used to indicate the route of a response message?
- A. Via
- B. From
- C. To
- D. Contact
Show answer and explanation ▾
Correct answer: A
Each device that forwards a SIP request adds its own Via header field. The response is sent back through the same devices in reverse order by following the Via entries.
Why the other options are wrong:
- B. From identifies the initiator of the request, not the path of the response.
- C. To identifies the intended recipient of the request, not the path of the response.
- D. Contact gives the address where the user can be reached directly for later requests.
Question 13
The start line of a SIP response consists of three parts: method (Method), request URI (Request-URI), and protocol version (SIP-VERSION).
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
Method, Request-URI and SIP version make up the start line of a SIP request. The start line of a response is a status line: SIP version, status code and reason phrase.
Why the other options are wrong:
- A. A response starts with a status line, so it carries no method or Request-URI.
Question 14
SIP and SDP are independent of each other. SIP can implement multimedia calls independently to add new applications or media easily.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
SIP only sets up, changes and ends sessions. It does not describe media, so it carries SDP in the message body to negotiate addresses, ports and codecs. SIP cannot complete a multimedia call on its own.
Why the other options are wrong:
- A. SIP depends on SDP to describe and negotiate the media of a call, so the statement is not true.
Question 15
SIP is an application-layer protocol independent of the transport-layer protocols. It can be carried over different transport protocols, such as UDP, TCP, TLS, and SCTP. Currently, SCTP is the most commonly used transport-layer protocol.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
SIP can run over UDP, TCP, TLS or SCTP, but SCTP is rarely used for it. UDP is the transport most commonly used for SIP, with TCP and TLS used where reliability or encryption is needed.
Why the other options are wrong:
- A. The last sentence is false, because SCTP is not the most commonly used transport for SIP.
Question 16
In the SIP protocol, the Via header field indicates the route of the subsequent response message.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
Every hop that forwards a request adds a Via header field with its own address. The response travels back along those Via entries in reverse order, so Via determines the route of the response.
Why the other options are wrong:
- B. The statement matches how Via is used in SIP, so it is not false.
Question 17
The Record-Route header field indicates the route of a request.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
A proxy adds a Record-Route header field to a request when it wants to stay on the signaling path. Later requests in the same dialog are then routed through the proxies recorded there.
Why the other options are wrong:
- B. Record-Route does concern the path that requests take through proxies, so the statement is not false.
Question 18
During a point-to-point call between different GKs, the local GK sends an LRQ request to the neighboring GK to query the information about the called node.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: A
When the called number is not registered locally, the gatekeeper sends a Location Request (LRQ) to the neighboring gatekeeper. The neighbor answers with a Location Confirm (LCF) carrying the address of the called node.
Why the other options are wrong:
- B. LRQ is the RAS message used between gatekeepers to locate a called node, so the statement is not false.
Question 19
Assume endpoints T1 and T2 are registered with the same SC node zone (signaling routing is enabled on the SC). After T1 calls the number of T2 using H.323, T1 communicates with T2.
How many TCP connections are established in this process?
- A. 2
- B. 4
- C. 3
- D. 5
Show answer and explanation ▾
Correct answer: B
With signaling routing enabled, the SC sits in the middle of the call. H.225 call signaling uses one TCP connection from T1 to the SC and one from the SC to T2, and H.245 control uses another two, which makes four.
Why the other options are wrong:
- A. Two connections would cover only the H.225 call signaling legs and leave out H.245.
- C. Three is not the total, because both H.225 and H.245 need a connection on each side of the SC.
- D. Five is one more than the two H.225 and two H.245 connections that are set up.
Question 20
The main functions of H.245 include capability negotiation, video encoding, and master-slave determination.
- A. TRUE
- B. FALSE
Show answer and explanation ▾
Correct answer: B
H.245 is the media control protocol of H.323. It handles capability exchange, master-slave determination and the opening and closing of logical channels. Video encoding is done by codecs such as H.264, not by H.245.
Why the other options are wrong:
- A. Video encoding is not an H.245 function, so the statement is not true.
That was 20 of 52.
The full Huawei H11-861 pack has all 52 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 20 free as one PDF by email. Get the Half Pack →
About the H11-861 exam
These 20 Huawei H11-861 questions are free here, and as a free PDF by email.
They are drawn from the same bank as the full H11-861 pack, which has 52 questions in total.