HPE7-V01 Practice Questions with Explanations

Free HPE7-V01 practice questions. 18 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.

HPE7-V01 practice questions

Question 1

Your customer is considering HPE SimpliVity or HPE Synergy with HPE Alletra Storage MP B10000 for a virtualization project.

Which statement about these platforms and their benefits is true?

  • A. HPE SimpliVity has all required VMware subscriptions embedded with the product, while standard deployment requires purchasing VMware subscriptions.
  • B. Traditional VMware clusters support up to 96 nodes, while HPE SimpliVity clusters support significantly more nodes in a single cluster providing greater scalability.
  • C. HPE SimpliVity clusters can only support the high-availability feature, while traditional VMware clusters can support both high-availability and DRS functionalities.
  • D. HPE SimpliVity offers different models including systems with AMD and Intel CPUs, while HPE Synergy only provides Intel-based compute nodes.
Show answer and explanation ▾

Correct answer: D

The platform difference that holds is processor choice: HPE SimpliVity is offered in both AMD and Intel models, while the HPE Synergy compute nodes in this comparison are Intel-based.

Why the other options are wrong:

  • A. SimpliVity does not come with all required VMware subscriptions built in; VMware licensing is bought for both platforms.
  • B. SimpliVity clusters are not larger than a traditional VMware cluster, so the scalability claim is wrong.
  • C. SimpliVity runs on vSphere, so it is not limited to high availability: DRS is available as well.

Question 2

You have been tasked with designing a solution for your customer that will support a virtualization workload based on HPE Synergy. Your customer has the following requirements: Dual-socket HPE Synergy compute nodes running ESXi 8.x with maximum memory supported Each of the nodes should have access to shared storage from HPE Alletra Storage MP B10000 All virtual machines should be protected against host failure All virtual machines with 8 vCPUs must be provided with Fault Tolerance All compute nodes should boot from disks located in the D3940 Storage Modules protected with RAID 1 All frames should be managed as one logical enclosure to simplify management All compute nodes should support 2 network ports with the maximum Ethernet connectivity speed You are reviewing a proposal that you must verify. The proposal consists of: - 3 HPE Synergy 12000 frames - 2 HPE Synergy Composed modules - 4 HPE Virtual Connect SE 100Gb F32 Module for Synergy - 4 HPE Synergy 50Gb Interconnect Link Module - 3 HPE Synergy D3940 Storage Module each with 20 SSD drives - 1152 core vSphere Enterprise Plus subscriptions - 36 HPE Synergy 480 Gen11 compute nodes Each SY480Gen11 is configured with: - a single Platinum 8562 CPU with 32 cores - HPE Synergy 6820C 25/50Gb CNA Converged Network Adapter - HPE Synergy 5830C 32G Fibre Channel Host Bus Adapters - HPE MicroChip Smart RAID P416ie-m SR Gen10 12G SAS Mezzanine Controller Which statement is true regarding the proposal?

  • A. Six compute nodes should be removed as there is not enough space for 12 compute nodes and a D3940 Storage Module in a frame.
  • B. OneView Advanced licenses should be added to the proposal as all of the compute nodes will be managed using HPE Composed.
  • C. 6 12Gb SAS Connection Modules should be added to provide connectivity to the HPE Alletra MP B10000 storage array.
  • D. 12 12Gb SAS Connection Modules should be added to provide connectivity to the D3940 Storage modules.
Show answer and explanation ▾

Correct answer: C

The compute nodes carry the P416ie-m SAS controller, which reaches its storage through HPE Synergy 12Gb SAS Connection Modules in the frame interconnect bays. The proposal lists none, so a redundant pair has to be added to each of the three frames, six in total.

Why the other options are wrong:

  • A. Reducing the number of compute nodes does not supply the storage connectivity that is missing from the proposal.
  • B. Adding HPE OneView Advanced licenses does not supply the storage connectivity that is missing from the proposal.
  • D. A redundant pair of modules in each of the three frames comes to six modules, not twelve.

Question 3

You presented a solution to your customer that will replace their legacy HPE BladeSystem. The new solution is based on the HPE Synergy platform and consists of the following components: - 5 HPE Synergy 12000 frames - 2 HPE Virtual Connect SE 100Gb F32 Module for Synergy - 8 HPE Synergy 25Gb Interconnect Link Module - 60 HPE Synergy 480 Gen11 Which statement about the business and financial benefit of this new solution for the customer is true?

  • A. Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more expansion slots in the form of mezzanine cards.
  • B. HPE Virtual Connect SE 100Gb F32 Module for Synergy can support FC traffic once an upgrade license for each module is added in HPE OneView.
  • C. Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more interconnect modules which provides better flexibility and expansion possibilities.
  • D. HPE Synergy 480 Gen 11 compute modules have an extension that will allow the customer to install 4 CPUs in half-height format compute nodes.
Show answer and explanation ▾

Correct answer: A

Compared with legacy BladeSystem blades, Synergy compute modules offer more mezzanine slots, so the customer gets more expansion options for adapters. That is the benefit the statement describes.

Why the other options are wrong:

  • B. Fibre Channel support on this module is not unlocked by adding an upgrade licence in OneView, so the statement is false.
  • C. A Synergy frame has fewer interconnect bays than a BladeSystem enclosure, so it does not support more interconnect modules.
  • D. The Synergy 480 Gen11 is a two-socket half-height node and has no extension for four CPUs.

Question 4

Your customer has HPE Superdome Flex running VMware ESXi 8.x. Current setup consists of: - One Rack Management Controller - One HPE Superdome Flex Base chassis - One HPE Superdome Flex Expansion chassis The existing complex has a single nPartition. The customer plans to expand the existing nPartition with two additional expansion chassis. Which statement about the planned expansion is true?

  • A. Existing nPartition must be placed in the maintenance mode using Rack Management Controller CLI.
  • B. If the existing nPartition is managed using HPE OneView, it must be removed before an expansion.
  • C. In order to add two additional chassis, customer has to power off the existing nPartition.
  • D. Customer has to replace one of the expansion chassis with base chassis, to provide IO redundancy.
Show answer and explanation ▾

Correct answer: C

Adding chassis to an existing Superdome Flex nPartition changes the hardware the partition spans, so the partition has to be powered off before the two expansion chassis are added.

Why the other options are wrong:

  • A. Maintenance mode through the Rack Management Controller CLI is not the required step, because the partition has to be powered off.
  • B. Removing the partition from HPE OneView is not a requirement for adding the chassis.
  • D. I/O redundancy does not require swapping an expansion chassis for a base chassis.

Question 5

A customer has requested a solution that can be used to connect two data centers over a Layer 3 MPLS connection and manage the Layer 2 networks for their workloads on an HPE SimpliVity Gen11 host. Aruba CX8325H switches will be deployed for the networking.

The ISP for MPLS connection offers only a single VRF with an option for an MTU up to 2000.

Which HPE solution would provide a central management platform to create and modify overlay networks for this setup?

  • A. HPE Aruba Networking ClearPass Policy Manager
  • B. AMD Pensando Security Manager
  • C. Aruba NetEdit
  • D. HPE Aruba Networking Fabric Composer
Show answer and explanation ▾

Correct answer: D

HPE Aruba Networking Fabric Composer is the central platform for building and changing overlay networks across Aruba CX switches, including for SimpliVity hosts, which is what the customer wants for the two sites.

Why the other options are wrong:

  • A. ClearPass Policy Manager handles network access control and policy, not overlay network creation.
  • B. AMD Pensando Security Manager manages the distributed firewall on Pensando hardware, not overlay networks.
  • C. NetEdit is a CLI-based switch configuration tool and does not provide central overlay orchestration.

Question 6

Your customer would like to improve the security of an existing physical and virtual environment. They are currently using the Synergy environment with the first generation of HPE Composer and Gen9 Synergy compute modules.

Which of the following changes would improve security?

  • A. Implement the HPE OneView Global Dashboard that can be used to distribute encryption keys and CA-signed certificates to all managed nodes.
  • B. Add dedicated HPE OneView licenses to enable integration with Active Directory, to provide extensive permission control within a physical environment.
  • C. Update the iLO firmware in the Gen9 Synergy compute modules to benefit from the Silicon Root of Trust.
  • D. Replace the Gen9 compute modules with Gen11, including HPE iLO6, that provides the Silicon Root of Trust.
Show answer and explanation ▾

Correct answer: D

Silicon Root of Trust is anchored in the iLO hardware of Gen10 and later servers, where it validates firmware before the server boots. Gen9 compute modules lack that hardware, so moving to Gen11 modules with iLO 6 is the change that adds this protection.

Why the other options are wrong:

  • A. HPE OneView Global Dashboard gives a unified view of multiple OneView instances and does not distribute certificates to managed nodes.
  • B. Directory integration does not depend on adding dedicated licenses and does not add hardware-level firmware protection.
  • C. A firmware update cannot add Silicon Root of Trust to Gen9 hardware, because the feature is built into the silicon of later generations.

Question 7

Your customer's environment includes HPE Private Cloud Business Edition with deployed HPE SimpliVity 380 Gen11 nodes.

They have asked you to upgrade the vSphere, Omnistack, and firmware components of the environment as a fully controlled operation.

Which tool should you use?

  • A. HPE OV4VC plugin and vCenter Update Manager
  • B. HPE SimpliVity upgrade manager application
  • C. HPE COM4VC plugin and vCenter Update Manager
  • D. HPE GreenLake - DSCC - PCBE tile - upgrade
Show answer and explanation ▾

Correct answer: D

HPE Private Cloud Business Edition is managed from HPE GreenLake, where the Private Cloud Business Edition service in Data Services Cloud Console runs a single orchestrated upgrade of the hypervisor, the OmniStack software and the server firmware.

Why the other options are wrong:

  • A. The HPE OneView for VMware vCenter plug-in with Update Manager does not upgrade the OmniStack software as one controlled operation.
  • B. The HPE SimpliVity Upgrade Manager application is not the tool used for a system managed as Private Cloud Business Edition.
  • C. A Compute Ops Management plug-in with Update Manager does not upgrade the OmniStack software as one controlled operation.

Question 8

Your customer has a combination of HPE and non-HPE equipment.

What is the correct functionality available in Aruba Fabric Composer for this customer's environment?

  • A. configuration of SAN zoning on ArubaOS-CX 8400 switches
  • B. management and monitoring of HPE Synergy Virtual Connect
  • C. management and monitoring of HPE Alletra Storage MP B10000 arrays
  • D. acceleration of spine-leaf fabric provisioning on ArubaOS-CX switches
Show answer and explanation ▾

Correct answer: D

Aruba Fabric Composer automates and orchestrates data center fabrics built on ArubaOS-CX switches, so it speeds up the provisioning of spine-leaf fabrics.

Why the other options are wrong:

  • A. SAN zoning is a Fibre Channel switch function and is not configured on ArubaOS-CX 8400 switches.
  • B. HPE Synergy Virtual Connect modules are managed through HPE OneView, not through Aruba Fabric Composer.
  • C. HPE Alletra Storage MP B10000 arrays are managed through their own storage management tools, not through Aruba Fabric Composer.

Question 9

You presented a solution to your customer that will replace their legacy HPE BladeSystem. The new solution is based on the HPE Synergy platform and consists of the following components: - 5 HPE Synergy 12000 frames - 2 HPE Virtual Connect SE 100Gb F32 Module for Synergy - 8 HPE Synergy 25Gb Interconnect Link Module - 60 HPE Synergy 480 Gen11 Which statement describes the business and financial benefits for this new solution on the customer?

  • A. Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more expansion slots in the form of mezzanine cards.
  • B. HPE Synergy supports master/satellite approach that requires less HPE Virtual Connect modules, and so will be more economical.
  • C. Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more interconnect modules which provides better flexibility and expansion possibilities.
  • D. HPE Synergy requires more HPE Virtual Connect modules because of the increased bandwidth for each compute nodes.
Show answer and explanation ▾

Correct answer: C

HPE Synergy is a composable platform whose frame interconnect bays form redundant fabrics that can be mixed and extended as needs change. That flexibility and room for expansion is the benefit over the legacy HPE BladeSystem for this customer.

Why the other options are wrong:

  • A. The mezzanine slot count is a compute module detail, not the business and financial benefit of this solution.
  • B. A lower count of HPE Virtual Connect modules is not the benefit statement that applies to this solution.
  • D. Needing more HPE Virtual Connect modules would add cost, which is not a benefit.

Question 10

Due to extreme low latency requirements of workloads, a customer has decided to adopt end-to-end NVMe over fabric in their new data center.

Which HPE offering will allow the customer to follow their desired strategy?

  • A. SimpliVity solution
  • B. HPE Alletra Storage MP B10000 array
  • C. HPE Alletra Storage Server 4120
  • D. HPE MSA Gen7
Show answer and explanation ▾

Correct answer: B

HPE Alletra Storage MP B10000 is an all-NVMe array that supports NVMe over fabrics host connectivity, so NVMe can run end to end from the host to the drives.

Why the other options are wrong:

  • A. HPE SimpliVity is a hyperconverged platform and is not an end-to-end NVMe over fabrics storage array.
  • C. HPE Alletra Storage Server 4120 is a storage server platform, not a shared array offering end-to-end NVMe over fabrics.
  • D. HPE MSA is an entry-level SAN array and does not provide end-to-end NVMe over fabrics.

Question 11

Your customer wants to implement a disaster recovery solution for their virtualization workload. They also want to implement a protection method that will protect the workload in case of a site failure. Their existing environment includes the following configurations: - all ESXi systems are located in the same datacenter - virtual machines are protected by an HA cluster - some of the VMs are protected with Fault Tolerance - HPE Synergy 480 Gen11 as a compute platform - HPE Alletra Storage MP B10240 arrays for storage - orchestrated failover for all VMs using VMware tools The customer plans to replicate the same setup at the second site. The total number of virtual machines that must be protected is 200. Your customer also expects an RPO of 0. Which component or configuration is a necessary part of a solution that will meet all customer requirements?

  • A. Extending the VMware cluster with ESXi nodes deployed at the remote site to create a VMware Metro cluster.
  • B. A failover recovery plan created using RapidDR software supported with the appropriate number of licenses.
  • C. HPE Synergy frames from the secondary site added to the logical enclosure configured in the primary site.
  • D. Asynchronous replication configured between sites used to replicate the volumes used to build the datastores.
Show answer and explanation ▾

Correct answer: A

An RPO of 0 with protection against a full site failure needs synchronous replication between the arrays and a vSphere cluster stretched across both sites, so that HA can restart the virtual machines on hosts at the surviving site.

Why the other options are wrong:

  • B. RapidDR is the disaster recovery orchestration tool for HPE SimpliVity, which is not part of this environment.
  • C. A logical enclosure groups frames that are cabled together in one location and cannot span two sites.
  • D. Asynchronous replication always leaves a replication lag, so it cannot deliver an RPO of 0.

Question 12

A customer has requested a solution for their CI/CD pipeline development compute requirement. The solution should have a small rack U footprint, 128 cores per cpu, and less than 200 watt per cpu power usage.

Which product line would you propose for these requirements?

  • A. HPE ProLiant DL320 Gen12
  • B. HPE ProLiant DL360 Gen11
  • C. HPE ProLiant RL300 Gen11
  • D. HPE ProLiant DL325 Gen12
Show answer and explanation ▾

Correct answer: C

The HPE ProLiant RL300 Gen11 is a 1U single-socket server built on Ampere Arm processors with up to 128 cores and low power draw per processor, which suits dense cloud-native and CI/CD workloads.

Why the other options are wrong:

  • A. The HPE ProLiant DL320 Gen12 does not offer a 128-core processor within the stated power limit.
  • B. The HPE ProLiant DL360 Gen11 does not offer a 128-core processor within the stated power limit.
  • D. The HPE ProLiant DL325 Gen12 does not meet the requirement of 128 cores at less than 200 watts per processor.

Question 13

Your customer is building a solution using HPE Private Cloud Business Edition with an HPE Alletra Storage MP B10000. Their proposed solution requires low storage latency to work correctly.

Which feature best fits the customer's requirements?

  • A. Use of the singular VV access model
  • B. Four node support in a cluster configuration
  • C. Support for the NVMe end-to-end protocol
  • D. 100Gb interconnects to drive enclosures
Show answer and explanation ▾

Correct answer: C

HPE Alletra Storage MP B10000 is built on NVMe from the host connection through to the drives. Running NVMe end to end removes the SCSI protocol overhead and gives the low storage latency the solution needs.

Why the other options are wrong:

  • A. A volume access model does not determine storage latency.
  • B. The number of nodes in the cluster relates to scale and availability, not to low latency.
  • D. The speed of the links to the drive enclosures is not the feature that addresses the latency requirement here.

Question 14

Your customer is considering HPE Alletra 6000 or HPE Alletra Storage MP B10000 for use as a Peer Persistence enabled platform for their critical workloads.

Which statement about these platforms and their benefits is true for Peer Persistence?

  • A. With HPE Alletra Storage MP B10000 your customer will be able to combine an Active Peer Persistence variant with the 3DC-Peer Persistence option
  • B. With Alletra 6000 your customer will be able to use Peer Persistence to protect workloads running on Red Hat
  • C. With Alletra 6000 your customer will be able to combine an Active Peer Persistence variant with the 3DC-Peer Persistence option
  • D. With Alletra 6000 your customer will be able to use Active Peer Persistence to protect workloads running on VMware
Show answer and explanation ▾

Correct answer: D

HPE Alletra 6000 supports Peer Persistence for VMware vSphere, where synchronously replicated volumes stay available to the ESXi hosts through an automatic switchover if one array or site fails.

Why the other options are wrong:

  • A. Active Peer Persistence is not combined with the three data center Peer Persistence option on HPE Alletra Storage MP B10000.
  • B. Protecting Red Hat workloads is not the Peer Persistence benefit that applies to Alletra 6000 in this comparison.
  • C. HPE Alletra 6000 does not offer a three data center Peer Persistence option.

Question 15

You are designing an HPE solution for SAP HANA. You are considering an as-a-service approach as one of the variants to be proposed to the customer.

What is true regarding HPE GreenLake for SAP HANA?

  • A. HPE GreenLake for SAP HANA can be used for on-prem running SAP HANA instances.
  • B. HPE GreenLake for SAP HANA requires an onsite HPE Alletra Storage MP X10000.
  • C. HPE GreenLake for SAP HANA offers billing based on the amount of users using SAP HANA.
  • D. HPE GreenLake services do not support SAP HANA workloads.
Show answer and explanation ▾

Correct answer: A

HPE GreenLake for SAP HANA delivers certified SAP HANA infrastructure as a pay-per-use service that runs on premises, in the customer data center or a colocation site.

Why the other options are wrong:

  • B. The service does not require an onsite HPE Alletra Storage MP X10000.
  • C. Billing follows consumption of the infrastructure, not the number of SAP HANA users.
  • D. SAP HANA is a supported HPE GreenLake workload.

Question 16

Your customer wants to simplify storage management for their VMware based environment by configuring HPE Storage Integration Pack for VMware vCenter Server. They want to use HPE OneView for VMware vCenter Server for ESXi deployment.

Currently they have 30 HPE ProLiant 380 Gen11 deployed with ESXi 8.x and they plan to add 30 additional systems with exactly the same setup.

Storage capacity is provided by HPE Alletra Storage MP B10000 array.

Which statement about the configuration and customer requirements is true?

  • A. Using HPE Storage Integration Pack for VMware vCenter Server for vVol creation is only supported if the ESXi systems have vSphere foundation subscription.
  • B. For HPE Alletra Storage MP B10000 arrays managed using HPE Storage Integration Pack for VMware vCenter Server, all CPGs are automatically exposed in vCenter Server and available for provisioning.
  • C. Your customer must purchase the appropriate number of licenses for HPE Storage Integration Pack for VMware vCenter Server and HPE OneView for VMware vCenter Server.
  • D. You can use HPE Storage Integration Pack for VMware vCenter Server to create a VMFS datastore for all nodes in the cluster without the need to login to the storage management tool.
Show answer and explanation ▾

Correct answer: C

The solution has to be correctly licensed for both vCenter integrations across all 60 servers, so the proposal must include the appropriate number of licenses for HPE Storage Integration Pack for VMware vCenter Server and HPE OneView for VMware vCenter Server.

Why the other options are wrong:

  • A. Creating vVols with the plug-in is not limited to hosts with a vSphere Foundation subscription.
  • B. Storage pools are not all exposed automatically, because the administrator chooses what is available for provisioning.
  • D. This statement does not describe the requirement that applies to this configuration.

Question 17

Which statement describes a correct recommended use case or workload for Qumulo?

  • A. Life sciences, higher education, and manufacturing research, including select imaging, analytics, and high-performance computing use cases
  • B. Second tier of storage to offload data from HPE StoreOnce, HPE ClusterStor (Luster), GPFS, HDFS, MapR from HPE, or Weka
  • C. Primary S3 target for Splunk SmartStore for log and other machine data analytics
  • D. Simple enterprise backup target for Commvault Complete, IBM Spectrum Protect, Oracle RMAN, Veeam, and Veritas NetBackup
Show answer and explanation ▾

Correct answer: A

Qumulo is a scale-out file data platform, so it fits file-heavy research workloads such as life sciences, higher education and manufacturing research, including imaging, analytics and selected high-performance computing use cases.

Why the other options are wrong:

  • B. Acting as a second storage tier behind other file systems is not a recommended Qumulo use case.
  • C. A primary S3 target for Splunk SmartStore is an object storage use case, not a recommended Qumulo use case.
  • D. A simple enterprise backup target is not a recommended Qumulo use case.

Question 18

When discussing the features of the HPE Private Cloud AI framework, how can a user see which NVIDIA Inference Microservices are available in the setup?

  • A. From the local management of NVIDIA AI Enterprise
  • B. From the REST catalog using the curl command
  • C. From the Private Cloud AI Tools and frameworks view
  • D. From the BOM that was used to setup the system initially
Show answer and explanation ▾

Correct answer: C

HPE Private Cloud AI presents its integrated software, including the available NVIDIA Inference Microservices, in the Tools and frameworks view of the management interface.

Why the other options are wrong:

  • A. A local NVIDIA AI Enterprise management console is not where Private Cloud AI lists the available microservices.
  • B. Querying a REST catalog with curl is not how a user views the available microservices in Private Cloud AI.
  • D. The bill of materials lists what was ordered, not which microservices are available in the running setup.

That was 18 of 50.

The full HPE7-V01 pack has all 50 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack

Not ready yet? Get the first 18 free as one PDF by email. Get the Half Pack →

About the HPE7-V01 exam

These 18 HPE7-V01 questions are free here, and as a free PDF by email.

They are drawn from the same bank as the full HPE7-V01 pack, which has 50 questions in total.

Back to blog