Fortinet NSE7_SSE_AR-26 Practice Questions with Explanations

Free Fortinet NSE7_SSE_AR-26 practice questions. 19 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.

NSE7_SSE_AR-26 practice questions

Question 1

An administrator configures the performance service-level agreement (SLA) with the probe mode, Passive.

What are two observable impacts of this configuration? (Choose two.)

  • A. FortiGate passively monitors the member if ICMP traffic is passing through the member.
  • B. The performance SLA measures the performance only on the preferred link.
  • C. FortiGate can offload traffic subject to passive monitoring to hardware.
  • D. FortiGate passively monitors the member if TCP traffic is passing through the member.
  • E. The SLA performance falls back to active monitoring when no traffic has been detected for 3 minutes.
Show answer and explanation ▾

Correct answer: B, D

In passive mode FortiGate sends no probes and instead measures the real TCP sessions that pass through a member. Measurements therefore exist only for the link that is carrying the traffic, which is the preferred link.

Why the other options are wrong:

  • A. Passive monitoring is based on TCP sessions, not on ICMP traffic.
  • C. Traffic that is measured passively cannot be offloaded to hardware.
  • E. Falling back to active probes belongs to the prefer passive mode, not to the passive mode.

Question 2

You want to configure two static routes. One that references a zone and the second one that references an SD-WAN member that belongs to that zone.

Which statement about this scenario is true?

  • A. You cannot create static routes that reference an SD-WAN zone.
  • B. The destination subnets must be different.
  • C. You cannot create static routes for individual SD-WAN members.
  • D. The destination subnet of routes defined for the zone must overlap the subnet of the route defined for the member.
Show answer and explanation ▾

Correct answer: B

Static routes for a zone and for a member of that zone are both allowed, but their destination subnets must be different.

Why the other options are wrong:

  • A. Static routes can reference an SD-WAN zone.
  • C. Static routes can be created for individual members.
  • D. Destination subnets are not required to overlap.

Question 3

When you deploy SD-WAN, you can choose from several common designs. Each design best applies to specific contexts.

Which two statements correctly associate a common SD-WAN design with its main indication or constraint? (Choose two.)

  • A. Use a remote breakout design to centralize the traffic security inspection and allow local devices with limited capabilities.
  • B. Use secure private access for companies with remote users.
  • C. Use a cloud on-ramp topology to centralize the web traffic inspection and limit local management requirements.
  • D. Use a standalone design for sites that do not require HA redundancy.
Show answer and explanation ▾

Correct answer: A, B

A remote breakout design sends branch internet traffic to a central site, so security inspection is centralized and branch devices can be simple. Secure private access gives remote users a protected path to the company's private applications.

Why the other options are wrong:

  • C. Cloud on-ramp is about reaching workloads in a cloud provider, not about centralizing web inspection.
  • D. A standalone design is not defined by the absence of HA, which is a separate choice.

Question 4

Which two components are part of onboarding a proxy-based endpoint for secure internet access (SIA)? (Choose two.)

  • A. Proxy auto-configuration (PAC) file
  • B. FortiClient software
  • C. FortiSASE certificate authority (CA) certificate
  • D. Tunnel policy
Show answer and explanation ▾

Correct answer: A, C

A proxy-based endpoint is onboarded with a PAC file and the FortiSASE CA certificate for inspection.

Why the other options are wrong:

  • B. FortiClient software is used for tunnel-based onboarding, not proxy-based.
  • D. A tunnel policy belongs to tunnel mode rather than proxy mode.

Question 5

What are two benefits of deploying secure private access with SD-WAN? (Choose two.)

  • A. Support of both TCP and UDP applications
  • B. ZTNA posture check performed by the hub FortiGate
  • C. A direct access proxy tunnel from FortiClient to the on-premises FortiGate
  • D. Inline security inspection by FortiSASE
Show answer and explanation ▾

Correct answer: A, D

Secure private access with SD-WAN supports both TCP and UDP applications and adds inline security inspection by FortiSASE.

Why the other options are wrong:

  • B. ZTNA posture checks are not done by the hub FortiGate in this design.
  • C. It does not use a direct proxy tunnel from FortiClient to the on-premises FortiGate.

Question 6

In an enterprise deployment of FortiSASE, single sign-on (SSO) is used to streamline user authentication across security services.

Which statement correctly describes an SSO capability on FortiSASE?

  • A. It bypasses identity verification when users access trusted networks.
  • B. It allows authentication to be delegated to an external identity provider such as Azure AD or SAML-based identity providers (IdPs).
  • C. It stores user credentials locally on FortiSASE to reduce dependency on external systems.
  • D. It requires users to authenticate separately for each security service for improved segmentation.
Show answer and explanation ▾

Correct answer: B

FortiSASE can act as a SAML service provider and hand user authentication to an external identity provider, such as Azure AD or another SAML-based IdP. Users sign in once with their corporate identity.

Why the other options are wrong:

  • A. SSO does not skip identity verification on trusted networks.
  • C. With SSO the credentials stay with the identity provider and are not stored on FortiSASE.
  • D. Single sign-on removes separate sign-ins for each service, it does not add them.

Question 7

How is the geofencing feature used on FortiSASE?

  • A. To restrict application access based on time of day in specific countries
  • B. To monitor and block access to personal content from specific countries
  • C. To encrypt data at rest on endpoints located in specific countries
  • D. To allow or block remote user connections to FortiSASE points of presence (POPs) based on source country
Show answer and explanation ▾

Correct answer: D

Geofencing on FortiSASE allows or blocks remote user connections to the FortiSASE points of presence according to the country the connection comes from.

Why the other options are wrong:

  • A. Geofencing is based on the source country of the connection, not on the time of day.
  • B. Geofencing controls connections to FortiSASE, not the content users browse.
  • C. Geofencing does not encrypt data on endpoints.

Question 8

What are three key routing principles of SD-WAN? (Choose three.)

  • A. SD-WAN rules are skipped if the best route to the destination is not an SD-WAN member.
  • B. Internet Service Database (ISDB) routes have precedence over SD-WAN rules.
  • C. Routes to directly connected subnets have precedence over SD-WAN rules.
  • D. SD-WAN members are skipped if they do not have a valid route to the destination.
  • E. SD-WAN rules are skipped if the best route to the destination is a static route.
Show answer and explanation ▾

Correct answer: A, B, D

FortiGate checks ISDB routes before SD-WAN rules. SD-WAN rules are used only when the best route to the destination points to an SD-WAN member, and within a rule any member without a valid route to the destination is skipped.

Why the other options are wrong:

  • C. SD-WAN rules are evaluated before the regular routing table, which is where connected routes are used.
  • E. The route type does not matter: a static route through an SD-WAN member still allows the rules to apply.

Question 9

What are three characteristics of the provisioning templates available on FortiManager? (Choose three.)

  • A. A CLI template can be of type CLI script or Perl script.
  • B. Each template group can contain up to three IPsec tunnel templates.
  • C. A template group can include a system template and an SD-WAN template.
  • D. A CLI template group can contain CLI templates of different types.
  • E. CLI templates are applied in order, from top to bottom.
Show answer and explanation ▾

Correct answer: C, D, E

A template group bundles different provisioning templates, for example a system template and an SD-WAN template. A CLI template group can hold CLI templates of different types, and CLI templates are applied in the listed order from top to bottom.

Why the other options are wrong:

  • A. CLI templates are of type CLI script or Jinja script, not Perl script.
  • B. A limit of three IPsec tunnel templates is not a rule of template groups.

Question 10

An existing FortiSASE customer has a third-party router in a remote office and wants to secure internet access for users at that location.

Which add-on license is required to enable this setup?

  • A. FortiSASE global add-on
  • B. FortiSASE branch on-ramp add-on
  • C. FortiSASE Secure Private Access (SPA) add-on
  • D. FortiSASE secure web gateway (SWG) add-on
Show answer and explanation ▾

Correct answer: B

The branch on-ramp add-on lets a site connect to FortiSASE from its edge device, including a third-party router, so the users at that office get secure internet access through FortiSASE.

Why the other options are wrong:

  • A. The global add-on is not the license that connects a branch router to FortiSASE.
  • C. The SPA add-on is for access to private applications, not for securing a branch's internet access.
  • D. The SWG add-on is not the license that connects a branch router to FortiSASE.

Question 11

In the context of SD-WAN, the terms underlay and overlay are commonly used to categorize links.

Which two statements about underlay and overlay links are correct? (Choose two.)

  • A. Wireless connections can be used to build overlay links.
  • B. Only wired connections can be used as underlay links.
  • C. A VLAN is a type of overlay link.
  • D. FortiLink interface is considered a underlay link.
  • E. Overlay links provide routing flexibility.
Show answer and explanation ▾

Correct answer: A, E

An overlay is a tunnel built on top of any underlay, including a wireless connection such as LTE. Because overlays are virtual links, they add routing flexibility that the physical links alone do not offer.

Why the other options are wrong:

  • B. Underlay links can be wired or wireless.
  • C. A VLAN is a layer 2 segment of the underlying network, not a tunnel built over it.
  • D. A FortiLink interface manages FortiSwitch devices and is not a WAN underlay link.

Question 12

When configuring FortiSASE BGP for SD-WAN private access with FortiSASE acting as the SD-WAN spoke, administrators must define specific settings.

What are some of the available configuration options?

  • A. FortiSASE supports BGP per overlay, but not BGP on loopback with IBGP or EBGP peering.
  • B. FortiSASE supports dynamic BGP, BGP per overlay, or BGP on loopback with IBGP or EBGP peering.
  • C. FortiSASE supports BGP per overlay or BGP on loopback with IBGP or EBGP peering.
  • D. FortiSASE supports BGP per overlay or BGP on loopback with IBGP peering only.
Show answer and explanation ▾

Correct answer: C

As an SD-WAN spoke, FortiSASE can be configured with BGP per overlay or with BGP on loopback, and either design can use IBGP or EBGP peering with the hub.

Why the other options are wrong:

  • A. BGP on loopback is supported, with IBGP or EBGP peering.
  • B. Dynamic BGP is not one of the available routing designs.
  • D. EBGP peering is supported as well as IBGP.

Question 13

Which component, typically categorized under network edge connectivity rather than cloud-delivered security controls, is incorporated as a foundational element within a secure access service edge (SASE) architecture but is not considered part of a security service edge (SSE) framework?

  • A. Zero trust network access (ZTNA)
  • B. Software-Defined WAN (SD-WAN)
  • C. Cloud access security broker (CASB)
  • D. Secure web gateway (SWG)
Show answer and explanation ▾

Correct answer: B

SASE combines network edge connectivity with cloud-delivered security. SSE is only the security half, so SD-WAN, the networking component, belongs to SASE but not to SSE.

Why the other options are wrong:

  • A. ZTNA is a cloud-delivered security control and is part of SSE.
  • C. CASB is a cloud-delivered security control and is part of SSE.
  • D. SWG is a cloud-delivered security control and is part of SSE.

Question 14

What is the maximum number of Secure Private Access (SPA) service connections (SPA hubs) supported in the SPA use case?

  • A. 4
  • B. 8
  • C. 12
  • D. 16
Show answer and explanation ▾

Correct answer: C

FortiSASE supports a maximum of 12 Secure Private Access service connections, which are the SPA hubs.

Why the other options are wrong:

  • A. 4 is below the supported maximum of 12.
  • B. 8 is below the supported maximum of 12.
  • D. 16 is above the supported maximum of 12.

Question 15

An organization is integrating a cloud-delivered security operations capability with its secure access service edge (SASE) architecture to enhance threat detection, investigation, and response across a distributed environment of users and endpoints. The security team is particularly focused on improving real-time threat monitoring and gaining unified visibility into security events across the infrastructure.

Which two benefits are achieved by integrating SOC-as-a-Service (SoCaaS) with FortiSASE? (Choose two.)

  • A. Eliminates the need for endpoint protection software
  • B. Provides bandwidth usage analytics
  • C. Continuous threat monitoring across all connected endpoints
  • D. Centralized visibility into all threat events
Show answer and explanation ▾

Correct answer: C, D

SOC-as-a-Service adds analysts who continuously monitor the threats seen across the endpoints connected to FortiSASE. It also brings the threat events into one central view for investigation and response.

Why the other options are wrong:

  • A. The service works alongside endpoint protection and does not replace it.
  • B. Bandwidth usage analytics is a network reporting function, not a benefit of a security operations service.

Question 16

In a deployment of FortiSASE, a network architect is designing branch connectivity using the branch on-ramp feature to simplify secure access to cloud and Software-as-a-Service (SaaS) resources without requiring a full, traditional WAN infrastructure at each site. What is the primary purpose of the FortiSASE branch on-ramp feature?

  • A. To perform application performance optimization for SaaS traffic at the branch level
  • B. To provide direct internet breakout from branch FortiGate only
  • C. To replace all endpoint security agents with cloud-based inspection only
  • D. To extend secure connectivity from branches without full WAN infrastructure
Show answer and explanation ▾

Correct answer: D

Branch on-ramp connects a branch site to FortiSASE so that its users reach cloud and SaaS resources securely, without the site needing a full WAN infrastructure of its own.

Why the other options are wrong:

  • A. Its purpose is secure connectivity for the branch, not SaaS performance optimization.
  • B. The traffic is sent to FortiSASE for inspection, not broken out directly from the branch FortiGate.
  • C. It connects sites and does not replace endpoint security agents.

Question 17

A customer wants to ensure secure access for private applications for their users by replacing their VPN.

Which two SASE technologies can you use to accomplish this task? (Choose two.)

  • A. secure web gateway (SWG) and cloud access security broker (CASB)
  • B. secure SD-WAN
  • C. zero trust network access (ZTNA)
  • D. SD-WAN on-ramp
Show answer and explanation ▾

Correct answer: C, D

ZTNA replaces a VPN by giving each verified user and device access to specific private applications only. SD-WAN on-ramp connects FortiSASE to the organization's SD-WAN hubs, so remote users reach the private applications behind them.

Why the other options are wrong:

  • A. SWG and CASB secure web and SaaS traffic, not access to private applications.
  • B. Secure SD-WAN connects sites to each other and does not by itself give remote users private application access.

Question 18

Which three factors about service-level agreement (SLA) targets and SD-WAN rules should you consider when configuring SD-WAN rules? (Choose three.)

  • A. When configuring an SD-WAN rule, you can select only one SLA target.
  • B. SLA targets are used by only SD-WAN rules that are configured with a lowest cost (SLA) strategy.
  • C. When configuring an SD-WAN rule, you can select multiple SLA targets from the same performance SLA.
  • D. Member metrics are measured when a performance SLA references them.
  • E. Best quality SD-WAN rules cannot use SLA targets.
Show answer and explanation ▾

Correct answer: C, D, E

An SD-WAN rule can use several SLA targets, including more than one from the same performance SLA. A member's metrics are measured once a performance SLA references that member. Best quality rules pick the member with the best measured metric and do not use SLA targets.

Why the other options are wrong:

  • A. A rule is not limited to a single SLA target.
  • B. SLA targets are not restricted to rules that use the lowest cost (SLA) strategy.

Question 19

What does FortiSASE do with multi-exit discriminator (MED) values received from hubs that are in different autonomous systems (AS)?

  • A. FortiSASE always prefers the path with the highest MED, regardless of AS.
  • B. FortiSASE compares MED values across different AS and selects the path with the highest MED.
  • C. FortiSASE converts MED values into local preference to compare paths across AS.
  • D. FortiSASE ignores MED values when they are received from hubs in different AS.
Show answer and explanation ▾

Correct answer: D

MED is compared only between routes learned from the same neighboring autonomous system. When hubs are in different autonomous systems, FortiSASE ignores their MED values in path selection.

Why the other options are wrong:

  • A. A lower MED is preferred where MED applies, and it is not compared regardless of AS.
  • B. MED values are not compared across different autonomous systems.
  • C. MED is not converted into local preference.

That was 19 of 50.

The full Fortinet NSE7_SSE_AR-26 pack has all 50 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack

Not ready yet? Get the first 22 free as one PDF by email. Get the Half Pack →

About the NSE7_SSE_AR-26 exam

These 19 Fortinet NSE7_SSE_AR-26 questions are free here. The free PDF has 22, free by email.

They are drawn from the same bank as the full NSE7_SSE_AR-26 pack, which has 50 questions in total.

Back to blog