Fortinet NSE 7 Secure Networking Architect Practice Questions with Explanations

Free Fortinet NSE 7 Secure Networking Architect practice questions. 9 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.

NSE 7 Secure Networking practice questions

Question 1

In the context of SD-WAN, the terms underlay and overlay are commonly used to categorize links.

Which two statements about underlay and overlay links are correct? (Choose two.)

  • A. Overlay links provide routing flexibility.
  • B. Only wired connections can be used as underlay links.
  • C. A VLAN is a type of overlay link.
  • D. FortiLink interface is considered an underlay link.
  • E. Wireless connections can be used to build overlay links.
Show answer and explanation ▾

Correct answer: A, E

Overlay links, such as tunnels, give routing flexibility, and wireless connections such as 4G or 5G can be used to build overlays. Underlay links are not limited to wired ones.

Why the other options are wrong:

  • B. Wireless links can also be underlay links, so this is wrong.
  • C. A VLAN is not an overlay link.
  • D. The FortiLink interface is not considered an underlay link.

Question 2

You have a FortiGate configuration with three user-defined SD-WAN zones and two members in each of these zones. One SD-WAN member is no longer in use in health-check and SD-WAN rules. You want to delete it. What happens if you delete the SD-WAN member from the FortiGate GUI?

  • A. FortiGate accepts the SD-WAN member deletion with no further action.
  • B. FortiGate displays an error message. SD-WAN zones must contain at least two members.
  • C. FortiGate accepts the deletion and removes static routes as required.
  • D. FortiGate accepts the deletion and places the member in the default SD-WAN zone.
Show answer and explanation ▾

Correct answer: A

FortiGate allows the deletion of an SD-WAN member that is no longer used in health checks or SD-WAN rules, with no further action needed.

Why the other options are wrong:

  • B. There is no requirement that a zone keeps at least two members.
  • C. No static routes need to be removed when the member is unused.
  • D. The member is not moved to the default zone.

Question 3

Which two troubleshooting steps should you perform if you encounter issues with intermittent web filter behavior? (Choose two.)

  • A. Check that the inspection mode configured for the web filter profile matches that of the firewall policy where it is applied.
  • B. Check that the correct port is mapped to HTTP in the Protocol Options.
  • C. Check that the communication between FortiGate and FortiGuard is stable.
  • D. Check that FortiGate is not entering conserve mode.
Show answer and explanation ▾

Correct answer: C, D

FortiGate asks FortiGuard to rate websites, so unstable communication with FortiGuard makes web filtering work at some moments and fail at others. Conserve mode has a similar effect, because inspection changes while FortiGate is short of memory.

Why the other options are wrong:

  • A. An inspection mode mismatch is a constant configuration condition, not an intermittent one.
  • B. A wrong HTTP port mapping affects the traffic all the time, not intermittently.

Question 4

You use the FortiManager SD-WAN overlay orchestrator to prepare an SD-WAN deployment. Using information provided through the SD-WAN overlay template wizard, FortiManager creates templates that are ready to install on the spoke and hub devices.

Which three templates are created by the SD-WAN overlay orchestrator for a spoke device? (Choose three.)

  • A. CLI template
  • B. Static route template
  • C. Rules template
  • D. BGP template
  • E. IPsec tunnel template
Show answer and explanation ▾

Correct answer: A, D, E

For each branch, the SD-WAN overlay orchestrator generates an IPsec tunnel template for the overlay tunnels, a BGP template for routing over them, and a CLI template for the remaining settings.

Why the other options are wrong:

  • B. A static route template is not one of the templates the orchestrator generates for a spoke.
  • C. SD-WAN rules are not generated by the orchestrator, they are configured afterward.

Question 5

In which order does FortiGate consider the following elements during the route lookup process?

  • A. SD-WAN rules, policy routes, static routes, ISDB routes
  • B. Policy routes, ISDB routes, SD-WAN rules, static routes
  • C. Policy routes, SD-WAN rules, Internet Service Database (ISDB) routes, BGP routes
  • D. SD-WAN rules, ISDB routes, policy routes, BGP routes
Show answer and explanation ▾

Correct answer: B

FortiGate checks regular policy routes first, then ISDB routes, then SD-WAN rules. Only when none of these forwards the traffic does it use the routes in the FIB, such as static routes.

Why the other options are wrong:

  • A. SD-WAN rules are not checked before policy routes, and ISDB routes are not checked last.
  • C. ISDB routes are checked before SD-WAN rules, not after them.
  • D. Policy routes are checked first, ahead of SD-WAN rules and ISDB routes.

Question 6

While troubleshooting a FortiGate web filter issue, users report that they cannot access any websites, even though those sites are not explicitly blocked by any web filter profiles that are applied to firewall policies.

What are the three most likely reasons for this behavior? (Choose three.)

  • A. The SSL/TLS deep inspection was configured but the browsers do not have the FortiGate certificate installed.
  • B. The web filter cache has been cleared causing all websites to take longer to be rated.
  • C. The DNS server is unreachable, preventing URL resolution.
  • D. The webfilter-force-off setting has been enabled under config system fortiguard.
  • E. The FortiGuard Web Filtering license has expired, causing FortiGate to apply the default block action.
Show answer and explanation ▾

Correct answer: A, C, E

Deep inspection without the FortiGate CA certificate in the browsers causes certificate errors on every HTTPS site. An unreachable DNS server stops every site name from resolving. An expired FortiGuard Web Filtering license leaves sites unrated, and FortiGate then blocks them by default.

Why the other options are wrong:

  • B. A cleared cache only makes the first rating of each site slower and does not block access.
  • D. Turning the FortiGuard web filtering service off stops rating lookups and does not block every website.

Question 7

You manage an SD-WAN topology and you will soon deploy 50 new branches.

Which two tasks can you do in advance to simplify this deployment? (Choose two.)

  • A. Create model devices.
  • B. Create a policy blueprint.
  • C. Define metadata variable values for each device.
  • D. Create a zero-touch provisioning (ZTP) template.
Show answer and explanation ▾

Correct answer: A, D

Model devices let you build the configuration of each new branch on FortiManager before the hardware is online. A zero-touch provisioning template prepares the settings once so that all 50 branches receive them automatically when they first connect.

Why the other options are wrong:

  • B. A policy blueprint is not the object FortiManager uses to prepare devices in advance.
  • C. Per-device metadata values are filled in when each branch is added and are not a reusable preparation task.

Question 8

You want to configure SD-WAN on a few FortiGate devices to optimize the use of WAN links and secure internet access. The devices are standalone FortiGate, already centrally managed by FortiManager.

Which statement applies?

  • A. You must move the devices to the SD-WAN Manager section before you can configure SD-WAN rules.
  • B. You can keep the devices in the Device Manager section, but you must place them in a dedicated device group.
  • C. You can keep the devices in the Device Manager section. You can configure per-device SD-WAN settings.
  • D. You must move the devices to the SD-WAN Manager section and use the SD-WAN standalone wizard.
Show answer and explanation ▾

Correct answer: C

Devices managed in Device Manager can stay there, and FortiManager lets you configure SD-WAN settings per device. No change of section or special grouping is needed for a few standalone FortiGate devices.

Why the other options are wrong:

  • A. Moving the devices to another section is not a requirement for configuring SD-WAN rules.
  • B. A dedicated device group is not required to configure SD-WAN.
  • D. The devices do not have to be moved, and a wizard is not mandatory for standalone devices.

Question 9

FortiManager SD-WAN overlay orchestrator helps prepare SD-WAN deployments. To complete the tasks performed by the SD-WAN overlay orchestrator, you must perform some post-run tasks.

Which two mandatory post-run tasks must you perform? (Choose two.)

  • A. Assign a hub_id metadata variable to each hub device.
  • B. Assign an sdwan_id metadata variable to each device (branch and hub).
  • C. Configure SD-WAN rules.
  • D. Configure routing through the overlay tunnels created by the SD-WAN overlay template.
  • E. Create policy packages and and assign them to the branch devices.
Show answer and explanation ▾

Correct answer: C, E

The SD-WAN overlay orchestrator prepares the overlay tunnels and the routing for them. Traffic steering and firewall policies are left to you, so afterward you must configure the SD-WAN rules and create policy packages and assign them to the branch devices.

Why the other options are wrong:

  • A. Assigning a hub_id metadata variable to each hub is not a mandatory task after the orchestrator runs.
  • B. Assigning an sdwan_id metadata variable to each device is not a mandatory task after the orchestrator runs.
  • D. Routing through the overlay tunnels is prepared by the orchestrator through the BGP template.

That was 9 of 55.

The full Fortinet NSE 7 Secure Networking Architect pack has all 55 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack

Not ready yet? Get the first 20 free as one PDF by email. Get the Half Pack →

About the NSE 7 Secure Networking exam

These 9 Fortinet NSE 7 Secure Networking Architect questions are free here. The free PDF has 20, free by email.

They are drawn from the same bank as the full NSE 7 Secure Networking pack, which has 55 questions in total.

Back to blog