Fortinet NSE 7 Public Cloud Security Architect Practice Questions with Explanations
Free Fortinet NSE 7 Public Cloud Security Architect practice questions. 13 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
NSE 7 Public Cloud Security practice questions
Question 1
You have deployed a FortiGate HA cluster in Azure using a gateway load balancer for traffic inspection. However, traffic is not being routed correctly through the firewalls.
What can be the cause of the issue?
- A. The health probes for the gateway load balancer are failing, which causes traffic to bypass the HA cluster.
- B. The protected VMs are in a different Azure subscription, which prevents the gateway load balancer from forwarding traffic.
- C. The Fortinet VMs have IP forwarding disabled, which is required for traffic inspection.
- D. The gateway load balancer is not associated with the correct network security group (NSG) rules, which allow traffic to pass through.
Show answer and explanation ▾
Correct answer: C
For traffic to be inspected, the FortiGate VM must be allowed to forward packets that are not addressed to itself. With IP forwarding disabled on the VM's network interface, traffic sent through the cluster is not routed on.
Why the other options are wrong:
- A. Failing health probes would take a unit out of service, but the question describes traffic being routed incorrectly, which points to forwarding.
- B. A gateway load balancer can chain to protected VMs without that requirement on the subscription.
- D. NSG rules matter for filtering, but they do not decide whether the Fortinet VM can forward transit traffic.
Question 2
Your organization has several FortiGate VMs deployed in Azure. You need to implement a solution with Azure native tools that allows you to determine whether packets are being permitted or blocked by the FortiGate VMs.
Which solution can you use to meet these requirements?
- A. Insert the VM traffic logs in Azure Sentinel.
- B. Install the Azure Monitor agent in all VMs.
- C. Use IP flow verify for each of the VMs.
- D. Configure Azure Advisor to analyze the network traffic.
Show answer and explanation ▾
Correct answer: C
IP flow verify is an Azure Network Watcher tool that tests whether a packet to or from a VM is allowed or denied by the Azure security rules applied to it, and names the rule that decides it.
Why the other options are wrong:
- A. Putting VM traffic logs in Azure Sentinel is for analysis and does not directly test whether packets are permitted.
- B. The Azure Monitor agent collects metrics and logs, not packet allow or deny decisions.
- D. Azure Advisor gives recommendations and does not analyse network traffic.
Question 3
An AWS administrator must ensure that each member of the cloud deployment team has the correct permissions to deploy and manage resources using CloudFormation. The administrator is researching which tasks must be executed with CloudFormation and therefore require CloudFormation permissions.
Which task is run using CloudFormation?
- A. Installing a Helm chart to deploy a FortiWeb ingress controller in an EKS cluster
- B. Creating an EKS cluster with the eksctl create cluster command
- C. Changing the number of nodes in a EKS cluster from AWS CloudShell
- D. Deploying a new pod with a service in an Elastic Kubernetes Service (EKS) cluster using the kubectl command
Show answer and explanation ▾
Correct answer: B
The eksctl create cluster command builds the cluster by creating AWS CloudFormation stacks that provision the control plane, networking and node groups. The person who runs it therefore needs CloudFormation permissions.
Why the other options are wrong:
- A. A Helm chart is installed through the Kubernetes API of the cluster and does not create a CloudFormation stack.
- C. Where the command is typed does not matter, and CloudShell is only a browser-based shell, not a CloudFormation task.
- D. kubectl sends the pod and service definitions to the Kubernetes API and does not use CloudFormation.
Question 4
A VM in Azure is failing to communicate with other VMs in the same subnet.
What is the most likely cause?
- A. Some of the VMs are beyond your allowed quota for the Azure region.
- B. There is at least one user-defined route blocking traffic within the subnet.
- C. The VMs do not have a public IP address configured.
- D. A network security group (NSG) has overridden the default intrasubnet communication rule.
Show answer and explanation ▾
Correct answer: D
VMs in the same subnet normally talk freely because of the default NSG rules. A network security group that overrides the default intra-subnet rule can block that traffic.
Why the other options are wrong:
- A. A quota limit affects creating VMs, not traffic between existing VMs.
- B. A user-defined route does not normally block traffic inside one subnet.
- C. A public IP address is not needed for VMs in the same subnet to talk to each other.
Question 5
An Azure administrator is trying to optimize the Azure Bicep files currently used for cloud deployments.
Which technique can Azure administrators use to improve the code in Azure Bicep files?
- A. Use the what-if operation before deploying new resources.
- B. Avoid nesting related resources to improve readability.
- C. Always use parameter files with the .json extension.
- D. Limit the allowed parameters with the use of decorators.
Show answer and explanation ▾
Correct answer: D
Decorators such as @allowed, @minLength and @maxValue restrict the values a parameter accepts, so a wrong value is rejected before deployment. Constraining parameters this way makes a Bicep file safer and easier to reuse.
Why the other options are wrong:
- A. The what-if operation previews a deployment and does not change or improve the code in the file.
- B. Nesting child resources inside their parent is a supported way to keep related resources together.
- C. Bicep also has its own parameter file format, so JSON parameter files are not always required.
Question 6
An administrator is looking for a solution that can provide insight into users and data stored in major SaaS applications in the multicloud environment.
Which product should the administrator deploy to have secure access to SaaS applications?
- A. FortiSandbox
- B. FortiWeb
- C. FortiSIEM
- D. FortiCASB
Show answer and explanation ▾
Correct answer: D
FortiCASB is the Fortinet cloud access security broker. It connects to major SaaS applications through their APIs to give visibility into users, their activity and the data stored there, and to apply security policy to that data.
Why the other options are wrong:
- A. FortiSandbox analyzes suspicious files for malware and does not provide insight into SaaS users and data.
- B. FortiWeb is a web application firewall that protects web applications you host.
- C. FortiSIEM collects and correlates logs and events and is not the product for controlling SaaS application access.
Question 7
How does an administrator secure container environments in Amazon AWS from newly emerged security threats?
- A. Using Amazon AWS-related application control signatures.
- B. Using Docker-related application control signatures.
- C. Using distributed network-related application control signatures.
- D. Using Amazon AWS_S3-related application control signatures.
Show answer and explanation ▾
Correct answer: B
FortiGate application control includes signatures for Docker traffic, and FortiGuard updates them as new threats appear. Applying these signatures in an application control profile lets FortiGate detect and block malicious activity aimed at container environments.
Why the other options are wrong:
- A. Signatures for Amazon AWS services are not the ones aimed at container traffic.
- C. Distributed network signatures are not the category that covers container threats.
- D. Signatures for Amazon S3 relate to object storage traffic, not to containers.
Question 8
You are automating configuration changes on one of the FortiGate VMs using Linux Red Hat Ansible.
How does Linux Red Hat Ansible connect to FortiGate to make the configuration change?
- A. It uses a YAML file.
- B. It uses a FortiGate VIP.
- C. It uses an API.
- D. It uses SSH.
Show answer and explanation ▾
Correct answer: C
The Ansible modules for FortiOS send their changes to the FortiGate REST API over HTTPS. The playbook describes the desired configuration and the modules turn it into API calls on the device.
Why the other options are wrong:
- A. A YAML file is the format the playbook is written in, not the way Ansible reaches the device.
- B. A VIP is a FortiGate object for destination NAT and is not a management connection method.
- D. The FortiOS modules do not push configuration through an SSH session.
Question 9
What are two main features in Amazon Web Services (AWS) network access control lists (NACLs)? (Choose two.)
- A. NACLs are tied to an instance.
- B. The default NACL is configured to allow all traffic.
- C. NACLs are stateless, and inbound and outbound rules are used for traffic filtering.
- D. You cannot use NACLs and Security Groups at the same time.
Show answer and explanation ▾
Correct answer: B, C
The default network ACL of a VPC allows all inbound and outbound traffic until you change it. Network ACLs are stateless, so return traffic is not allowed automatically and separate inbound and outbound rules are needed.
Why the other options are wrong:
- A. Network ACLs are associated with subnets. Security groups are the control that applies to instances.
- D. Network ACLs and security groups work together as two layers of filtering in the same VPC.
Question 10
Which statement about immutable infrastructure in automation is true?
- A. It is the practice of deploying a new server for every configuration change.
- B. It is the practice of deploying two parallel servers for high availability.
- C. It is the practice of modifying the existing server configuration after it is deployed.
- D. It is the practice of applying hotfixes and OS patches after deployment.
Show answer and explanation ▾
Correct answer: A
With immutable infrastructure a server is never changed once it is deployed. Every configuration change is made in the template, a new server is deployed from it, and the old one is removed.
Why the other options are wrong:
- B. Running two servers in parallel is a high availability design, not immutability.
- C. Changing a server after deployment is the mutable approach.
- D. Patching a running server in place is the mutable approach.
Question 11
Your administrator instructed you to deploy an Azure vWAN solution to create a connection between the main company site and branch sites to the other company VNETs.
What is the best connection solution available between your company headquarters, branch sites, and the Azure vWAN hub?
- A. An L2TP connection
- B. GRE tunnels
- C. SSL VPN connections
- D. ExpressRoute
Show answer and explanation ▾
Correct answer: D
An Azure Virtual WAN hub connects on-premises sites through site-to-site IPsec VPN or ExpressRoute. ExpressRoute is a private, dedicated connection with predictable performance, which makes it the best choice for linking headquarters and branch sites to the hub.
Why the other options are wrong:
- A. L2TP is not a connection type offered by a Virtual WAN hub.
- B. GRE tunnels are not a connection type offered by a Virtual WAN hub.
- C. SSL VPN is meant for individual remote users, not for connecting whole sites to the hub.
Question 12
Your DevOps team is evaluating different Infrastructure as Code (IaC) solutions for deploying complex Azure environments.
What is an advantage of choosing Azure Bicep over other IaC tools available?
- A. Azure Bicep generates deployment logs that are optimized to improve error handling.
- B. Azure Bicep requires less frequent schema updates than Azure Resource Manager (ARM) templates.
- C. Azure Bicep can reduce deployment costs by limiting resource utilization during testing.
- D. Azure Bicep provides immediate support for all Azure services, including those in preview.
Show answer and explanation ▾
Correct answer: D
Bicep is the native Azure language for infrastructure as code and compiles directly to Azure Resource Manager templates. Every resource type and API version, including preview ones, can be used as soon as Azure releases it, without waiting for a third-party tool to be updated.
Why the other options are wrong:
- A. Deployment logs come from Azure Resource Manager and are the same whichever language produced the template.
- B. Bicep uses the same resource types and API versions as ARM templates.
- C. The choice of language does not change what the deployed resources cost.
Question 13
You are experiencing intermittent connectivity issues in a FortiGate HA cluster deployed with Azure gateway load balancer. Traffic is being dropped when it passes through the cluster.
What is the cause of the issue?
- A. The Azure gateway load balancer is blocking large packets, causing traffic failures.
- B. The protected VMs are running an application that fragments packets.
- C. The Azure gateway load balancer is configured with an incorrect health probe port.
- D. The FortiGate firewalls are using the default maximum transmission unit (MTU) size supported by Azure.
Show answer and explanation ▾
Correct answer: D
The Azure gateway load balancer sends traffic to the FortiGate firewalls inside VXLAN tunnels, which adds extra header bytes to every packet. With the default MTU on the FortiGate interfaces, full-size packets no longer fit once encapsulated and are dropped, so the MTU must be raised.
Why the other options are wrong:
- A. The gateway load balancer does not filter packets by size.
- B. Nothing in the scenario points to the applications on the protected VMs as the source of the drops.
- C. A wrong health probe port would mark the firewalls as down and stop all traffic, not cause intermittent drops.
That was 13 of 66.
The full Fortinet NSE 7 Public Cloud Security Architect pack has all 66 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 26 free as one PDF by email. Get the Half Pack →
About the NSE 7 Public Cloud Security exam
These 13 Fortinet NSE 7 Public Cloud Security Architect questions are free here. The free PDF has 26, free by email.
They are drawn from the same bank as the full NSE 7 Public Cloud Security pack, which has 66 questions in total.