EXIN CITM Practice Questions with Explanations
Free EXIN CITM practice questions. 19 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
CITM practice questions
Question 1
Rapid expansion has forced the organization to control business change using a formal approach, this resulted in creating a new role in the organization.
Which role does apply?
- A. Risk Manager
- B. Service Level Manager
- C. Business Relationship Manager
- D. Change Manager
Show answer and explanation ▾
Correct answer: D
When a business formalizes how change is controlled, the role created is the Change Manager, who owns the change process and its authorizations.
Why the other options are wrong:
- A. A Risk Manager handles risk, not the change process.
- B. A Service Level Manager manages service level agreements.
- C. A Business Relationship Manager links the provider with customers.
Question 2
One particular incident repeatedly occurs every first day of the working week. As part of problem management it is decided to continuously analyse the occurrence of the problem until the root cause is identified.
Which technique is recommended?
- A. Fault isolation
- B. 5-Whys
- C. Affinity mapping
- D. Technical observation post
Show answer and explanation ▾
Correct answer: B
The 5-Whys technique keeps asking why the problem occurs, with each answer becoming the next question, until the underlying root cause is exposed. That fits a recurring incident that is analyzed again and again until its cause is found.
Why the other options are wrong:
- A. Fault isolation narrows down which component is failing; it is not a repeated questioning of the cause.
- C. Affinity mapping groups a large number of ideas into related categories and does not drill down to a root cause.
- D. A technical observation post brings specialists together to watch an event as it happens, which is not the repeated cause analysis described.
Question 3
A customer survey needs to be designed.
What is a Critical Success Factor (CSF) in achieving a high participation rate?
- A. Keep it short, simple and consistent
- B. Use leading and loaded questions
- C. Ask several questions at a time
- D. Use assumptions
Show answer and explanation ▾
Correct answer: A
A short, simple and consistent survey is easy to finish, which raises participation. Length and clarity are what drive response rates.
Why the other options are wrong:
- B. Leading and loaded questions bias the answers and put people off.
- C. Asking several questions at once confuses respondents.
- D. Assumptions in questions distort results and lower trust.
Question 4
Vendor negotiation begins, which criteria must be considered to close an agreement which is realistic and satisfies both parties involved?
- A. Knowing when it is time to ignore the vendor
- B. Negotiate every single item
- C. Timing for negotiation
- D. Understand the current market and discount structures
Show answer and explanation ▾
Correct answer: D
Knowing the current market and the vendor's discount structures lets you set realistic terms that both sides can accept.
Why the other options are wrong:
- A. Ignoring the vendor does not lead to an agreement.
- B. Negotiating every single item wastes time and is not a criterion for a realistic deal.
- C. Timing matters, but it alone does not make a deal realistic or mutually satisfying.
Question 5
The marketing department is expanding and new staff members are hired. Computer systems need to be installed and user accounts have to be created.
Which type of change is applied?
- A. Exceptional
- B. Emergency
- C. Normal
- D. Standard
Show answer and explanation ▾
Correct answer: D
Setting up computers and accounts for new staff is a routine, pre-authorized, low-risk task, which is a standard change.
Why the other options are wrong:
- A. Exceptional is not the type used for routine, pre-approved tasks.
- B. An emergency change is urgent and unplanned, which this is not.
- C. A normal change goes through full assessment and authorization each time.
Question 6
During vendor selection, you are going to verify and validate the previous performance of all vendors competing for the project.
Which activity is going to take place?
- A. Reference check
- B. Vendors pre-selection
- C. Request for Proposal (RFP)
- D. Proposal evaluation
Show answer and explanation ▾
Correct answer: A
A reference check contacts a vendor's earlier customers to verify and validate how the vendor actually performed on previous work. It confirms the claims made in the proposal before a vendor is chosen.
Why the other options are wrong:
- B. Vendor pre-selection builds the shortlist of candidates and does not validate their past performance with customers.
- C. A Request for Proposal asks vendors to submit their offer; it does not verify earlier performance.
- D. Proposal evaluation scores the submitted offers against the criteria, not the vendor's track record with past clients.
Question 7
Activities in a project are discussed in a Work/Product Breakdown Structure (WBS / PBS) session during the planning phase. Estimations are subdivided through the levels of the product breakdown structure.
Which estimation technique is applied?
- A. Comparative
- B. Bottom-up
- C. Top-down
- D. Three point
Show answer and explanation ▾
Correct answer: B
Bottom-up estimating works from the detailed items of the breakdown structure: each lowest-level product or work package is estimated and the figures are added up through the levels to give the project total.
Why the other options are wrong:
- A. Comparative estimating uses figures from similar past projects instead of the items of the breakdown structure.
- C. Top-down estimating starts from one overall project figure and is not built from the detailed items of a breakdown session.
- D. Three point estimating combines optimistic, most likely and pessimistic values for an item and does not describe working through breakdown levels.
Question 8
For one of the mission critical applications in a telecom organization data loss cannot be tolerated
Which replication mode do you recommend?
- A. Instant replication
- B. Synchronous replication
- C. Asynchronous replication
- D. Semi-synchronous replication
Show answer and explanation ▾
Correct answer: B
Synchronous replication writes every change to the primary and the secondary site before the transaction is confirmed, so both copies are always identical. No committed data is lost if the primary site fails.
Why the other options are wrong:
- A. Instant replication is not a standard replication mode.
- C. Asynchronous replication sends changes after they are committed, so the most recent writes can be lost in a failure.
- D. Semi-synchronous replication does not guarantee that every write is committed at the second site before it is confirmed.
Question 9
As part of the business continuity plan preparations, management wants a site arrangement with the presence of all IT infrastructure, data and a desk for the workers.
Which site do you recommend?
- A. Cold site
- B. Warm site
- C. Hot site
- D. Mobile site
Show answer and explanation ▾
Correct answer: C
A hot site is a fully equipped alternate location with the IT infrastructure, current data and workspace already in place, so staff can resume work there almost immediately.
Why the other options are wrong:
- A. A cold site offers only space and basic facilities, with no IT infrastructure or data installed.
- B. A warm site has some equipment in place but lacks current data and needs time to be made ready.
- D. A mobile site is a transportable unit brought in when needed and is not a standing site with everything present.
Question 10
To safeguard integrity during large financial transactions, an additional control is implemented to prevent individuals from committing fraudulent activities, potentially stealing money for their own benefit.
Which integrity control is implemented?
- A. Mandatory vacation / holiday
- B. Rotation of duties
- C. Separation of duties
- D. Need to know
Show answer and explanation ▾
Correct answer: C
Separation of duties splits a sensitive task, such as approving and executing a large payment, between different people. No single person can complete the transaction alone, which prevents fraud before it happens.
Why the other options are wrong:
- A. Mandatory vacation helps detect fraud while someone else covers the job; it does not stop one person from completing a transaction.
- B. Rotation of duties moves staff between roles over time and still lets one person handle the whole transaction.
- D. Need to know limits access to information and protects confidentiality, not the integrity of a transaction.
Question 11
During several project meetings it is discovered that the project team struggles in delivering the required products.
Which process is most likely to be blamed for this?
- A. Communication management
- B. Risk management
- C. Scope management
- D. Cost management
Show answer and explanation ▾
Correct answer: C
Scope management defines exactly which products the project must deliver and controls changes to them. When a team struggles to deliver the required products, unclear or poorly controlled scope is the most likely cause.
Why the other options are wrong:
- A. Communication management governs how project information is shared and does not define the products to deliver.
- B. Risk management deals with uncertain events that may affect the project, not with what must be delivered.
- D. Cost management plans and controls the budget and does not define the required products.
Question 12
In business continuity planning, the maximum amount of time that an organization can survive without the business process in any form, is considered which of the following?
- A. Maximum Time Allowed (MTA)
- B. Recovery Point Objective (RPO)
- C. Recovery Time Objective (RTO)
- D. Maximum Allowable Outage (MAO)
Show answer and explanation ▾
Correct answer: D
Maximum Allowable Outage is the longest period a business process can be unavailable in any form before the organization can no longer survive. Recovery objectives must always be set shorter than this limit.
Why the other options are wrong:
- A. Maximum Time Allowed is not a standard business continuity term.
- B. Recovery Point Objective is the maximum amount of data loss that is acceptable, measured back in time.
- C. Recovery Time Objective is the target time for restoring the process, which is set within the survival limit.
Question 13
The IT operations department is expanding and will hire new staff members. All staff hiring procedures such as proper sourcing, shortlisting candidates and conducting job interviews must be followed but time is lacking due to other priorities.
What is the ideal method of sourcing?
- A. Word to mouth
- B. Recruitment agency
- C. Internal IT staff based on a swap analysis
- D. Internet job board
Show answer and explanation ▾
Correct answer: B
A recruitment agency carries out the sourcing, shortlisting and first interviews on the organization's behalf. All hiring procedures are still followed while the IT department spends very little of its own time.
Why the other options are wrong:
- A. Word of mouth brings in informal referrals and leaves all screening and interviewing to the busy department.
- C. Moving internal IT staff does not add the new staff members the expanding department needs.
- D. An internet job board only advertises the vacancy, so the department must still screen and shortlist every applicant itself.
Question 14
One year ago, the organization started a security awareness program and it has created a strong security culture in the meantime. Customers are very satisfied, claiming the IT services availability has increased now they understand the different threats and actions to take for each.
What is the most likely success factor in the program?
- A. Budget is sufficient
- B. Scope of the program meets the requirement
- C. Message materials are present and renewal is taking place on regular basis
- D. Instructor-led sessions
Show answer and explanation ▾
Correct answer: C
An awareness program stays effective when its message materials are available and refreshed regularly. Repeated, updated messages keep threats and the right actions in people's minds, which builds a lasting security culture.
Why the other options are wrong:
- A. A sufficient budget makes the program possible but does not by itself change how people behave.
- B. A well-defined scope sets what the program covers; it does not keep the message alive over a year.
- D. Instructor-led sessions are one delivery method and their effect fades without regular reinforcement.
Question 15
Project risk is emerging, which is the correct following order to manage it?
- A. Assess - Identify - Control
- B. Control - Identify - Assess
- C. Identify - Assess - Control
Show answer and explanation ▾
Correct answer: C
A risk must first be identified, then assessed for its likelihood and impact, and only then controlled with a suitable response. Each step depends on the result of the one before it.
Why the other options are wrong:
- A. A risk cannot be assessed before it has been identified.
- B. Controlling a risk before it is identified and assessed means acting without knowing what it is or how serious it is.
Question 16
Several triggers will force the organization to review IT services.
What should be your recommendation based on commonly accepted best practices?
- A. Every six months and whenever law, code and regulations change
- B. At least once per year or more if required and whenever requested by the customer
- C. Every month and whenever IT services require a technical change
- D. Every quarter of the year and whenever non-compliances are reported
Show answer and explanation ▾
Correct answer: B
Good practice is to review IT services with the customer at least once a year, more often when circumstances require it, and whenever the customer asks for a review.
Why the other options are wrong:
- A. A fixed six-month cycle tied only to legal changes is not the commonly accepted minimum and ignores customer requests.
- C. A monthly review triggered by technical changes is change management work, not the accepted service review interval.
- D. A quarterly cycle tied to non-compliances is not the commonly accepted minimum and ignores customer requests.
Question 17
Whilst creating the budget for the project, stakeholders wish to have a high-level indication of the project cost involved.
What is the preferred budget estimation method?
- A. Rough Order of Magnitude (ROM)
- B. Analogous estimate
- C. Budget estimate
- D. Definite estimate
Show answer and explanation ▾
Correct answer: A
A Rough Order of Magnitude estimate gives a high-level indication of cost with a wide accuracy range. It is used early in a project, when stakeholders need a first figure and few details are known.
Why the other options are wrong:
- B. An analogous estimate is a technique based on a similar past project, not the name of the high-level indication of cost.
- C. A budget estimate is more detailed and more accurate, and is prepared once more project information is available.
- D. A definitive estimate is the most accurate type and needs detailed project information.
Question 18
For the project manager to round up and close a project meeting, which of the below communication skills will be most suitable and effective?
- A. Summarizing, recapping, and identifying the next steps
- B. Fact-finding to identify or confirm information
- C. Motivating to provide encouragement or reassurance
- D. Listening actively and effectively
Show answer and explanation ▾
Correct answer: A
Closing a meeting well means summarizing what was discussed, recapping the decisions and naming the next steps with their owners. Everyone leaves with the same understanding of what happens next.
Why the other options are wrong:
- B. Fact-finding gathers or confirms information during the discussion, not at the close.
- C. Motivating encourages the team but does not wrap up the decisions and actions of the meeting.
- D. Active listening is used throughout the meeting to understand others and does not close it.
Question 19
Software development engineers are going to be hired. Due to the specialist work that is required, the selection process demands verification of expertise.
What is the most important aspect?
- A. Ask candidates’ ambitions during job interview
- B. Review experience in candidates’ resume
- C. Perform a business case / skill test
- D. Conduct pre-screening on candidates’ personal background
Show answer and explanation ▾
Correct answer: C
A business case or skill test makes candidates demonstrate their expertise on a realistic task. It is direct proof of ability, which matters most when the work is specialist.
Why the other options are wrong:
- A. Asking about ambitions shows motivation, not technical expertise.
- B. A resume lists claimed experience and does not prove the candidate can do the work.
- D. Pre-screening a personal background checks suitability and integrity, not specialist skill.
That was 19 of 50.
The full EXIN CITM pack has all 50 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 19 free as one PDF by email. Get the Half Pack →
About the CITM exam
These 19 EXIN CITM questions are free here, and as a free PDF by email.
They are drawn from the same bank as the full CITM pack, which has 50 questions in total.