CWNP CWAP-405 CWAP Practice Questions with Explanations

Free CWNP CWAP-405 CWAP practice questions. 45 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.

CWAP-405 practice questions

Question 1

You have been hired to troubleshoot a WLAN problem for a government organization. You intended to use a Protocol Analyzer as part of your troubleshooting methodology; however, the customer is concerned about you capturing sensitive data transmitted over the network.

Which common protocol analyzer feature could you use to address this concern?

  • A. Forensics capture
  • B. Expert analysis
  • C. Data masking
  • D. Packet slicing
Show answer and explanation ▾

Correct answer: D

Packet slicing keeps only the first part of each captured frame and discards the payload. The headers needed for troubleshooting remain while the sensitive data is never stored.

Why the other options are wrong:

  • A. Forensics capture records full frames for evidence, which is the opposite of hiding data.
  • B. Expert analysis flags problems in a capture but does not remove sensitive data.
  • C. Data masking is not a standard protocol analyzer capture feature.

Question 2

Your organization would like to give their network field engineers a tool to provide an overview of a given wireless LAN environment. They are interested in how many SSIDs are enabled per radio, channels used, and the number of APs per channel. They do not want to require the engineers to view multiple frames to determine the information.

Which tool would you recommend that provides this information at the lowest cost?

  • A. Spectrum Analyzer
  • B. Protocol Analyzer
  • C. WLAN Scanner
  • D. Site Survey Software
Show answer and explanation ▾

Correct answer: C

A WLAN scanner lists SSIDs per radio, channels and APs per channel in one view without frame-by-frame work, and it is the cheapest of these tools.

Why the other options are wrong:

  • A. A spectrum analyzer shows RF energy, not SSIDs or APs per channel.
  • B. A protocol analyzer would require reading many frames to build the overview.
  • D. Site survey software is more costly and is built for coverage design, not a quick overview.

Question 3

You are troubleshooting an intermittent problem with some WLAN VoIP phones resulting in dropped calls. You configure your capture on a fixed channel matching the current operating channel of a test phone. So far, you have been unsuccessful in capturing the problem because the VoIP phone always roams to another AP before the problem occurs.

What would be the best setup for your packet capture to make sure you capture the problem?

  • A. Determine which channel the phone is likely to roam to next and capture on that channel.
  • B. Configure the capture adaptor to scan all channels used in the environment.
  • C. Configure all APs in monitor mode and have the packets streamed back to your analyzer.
  • D. Use multiple capture adaptors and the channel aggregator feature of a protocol analyzer to capture on all AP channels in the client’s area.
Show answer and explanation ▾

Correct answer: D

Using several capture adaptors with the channel aggregator feature lets the analyzer capture on every AP channel at once, so the phone is followed wherever it roams.

Why the other options are wrong:

  • A. Guessing the next channel can miss the roam, because the phone may not go where you expect.
  • B. A single adaptor scanning channels sees each channel only part of the time and can miss the problem.
  • C. Monitor mode on all APs is costly and is not the capture setup for a single roaming client.

Question 4

Which field, within a protocol analyzer, records the time at which a frame entered the capture buffer?

  • A. Delta time
  • B. Absolute time
  • C. Buffer time
  • D. Bin time
Show answer and explanation ▾

Correct answer: B

Absolute time is the clock time at which the analyzer captured a frame into its buffer. It lets you match a frame to a real-world event such as a user complaint.

Why the other options are wrong:

  • A. Delta time is the interval since the previous frame, not the time of capture.
  • C. Buffer time is not a standard protocol analyzer time field.
  • D. Bin time is not a protocol analyzer time field.

Question 5

What feature of protocol analyzers shows a visual representation of who is communicating with whom, by connecting communicating nodes with a line?

  • A. Peer map
  • B. Node map
  • C. Google map
  • D. Communication map
Show answer and explanation ▾

Correct answer: A

A peer map draws each node in the capture and joins the nodes that exchange frames with a line, giving a quick visual of who is talking to whom and how much.

Why the other options are wrong:

  • B. Node map is not the name of this protocol analyzer feature.
  • C. Google map is a geographic mapping service, not a protocol analyzer view.
  • D. Communication map is not the name of this protocol analyzer feature.

Question 6

Which one of the following tools would be the best to most accurately measure the noise floor?

  • A. Protocol Analyzer
  • B. Spectrum Analyzer
  • C. WLAN Scanner
  • D. OS Utilities
Show answer and explanation ▾

Correct answer: B

A spectrum analyzer measures raw RF energy across the band, including energy from sources that are not Wi-Fi, so it gives the most accurate reading of the noise floor.

Why the other options are wrong:

  • A. A protocol analyzer decodes 802.11 frames and relies on the Wi-Fi adapter's estimate of noise.
  • C. A WLAN scanner reports what the Wi-Fi adapter estimates, not a true RF measurement.
  • D. OS utilities report adapter estimates, not a true RF measurement of noise.

Question 7

What is the typical duty cycle of a microwave oven?

  • A. 0.1
  • B. 0.05
  • C. 0.5
  • D. 0.25
Show answer and explanation ▾

Correct answer: C

A microwave oven's magnetron radiates during roughly half of each AC power cycle and is off for the other half, which gives a typical duty cycle of about 50 percent, or 0.5.

Why the other options are wrong:

  • A. A 10 percent duty cycle is far lower than a microwave oven typically produces.
  • B. A 5 percent duty cycle is far lower than a microwave oven typically produces.
  • D. A 25 percent duty cycle is lower than a microwave oven typically produces.

Question 8

Which one of the following cannot typically be determined using a Spectrum Analyzer without Wi-Fi integration?

  • A. Channel Utilization
  • B. SNR
  • C. Device Location
  • D. Data Rate
Show answer and explanation ▾

Correct answer: D

A spectrum analyzer measures RF energy and does not demodulate 802.11 frames. Without a Wi-Fi adapter feeding it frame information, it cannot report the data rate of a transmission.

Why the other options are wrong:

  • A. Channel utilization can be measured from how often RF energy is present on the channel.
  • B. SNR can be worked out from the measured signal amplitude and noise floor.
  • C. Device location can be found by tracking signal amplitude, often with a directional antenna.

Question 9

Laptop-based wireless spectrum analyzers provide a visual representation of RF signals in which domain?

  • A. Session domain
  • B. Frequency domain
  • C. Transport domain
  • D. Protocol domain
Show answer and explanation ▾

Correct answer: B

A spectrum analyzer plots signal amplitude against frequency, which is a frequency domain view of the RF environment.

Why the other options are wrong:

  • A. Session domain is not a way of representing RF signals.
  • C. Transport domain is not a way of representing RF signals.
  • D. Protocol domain describes decoded frames, which is the job of a protocol analyzer.

Question 10

The resolution bandwidth of a Fast Fourier Transform plot is dictated by what?

  • A. Bin size
  • B. Bucket size
  • C. Adapter size
  • D. Batch size
Show answer and explanation ▾

Correct answer: A

A Fast Fourier Transform divides the measured spectrum into frequency bins. The width of each bin sets the smallest frequency slice the plot can resolve, which is the resolution bandwidth.

Why the other options are wrong:

  • B. Bucket size is not the term that sets FFT resolution bandwidth.
  • C. Adapter size has no effect on FFT resolution bandwidth.
  • D. Batch size is not a parameter of an FFT plot.

Question 11

Which Spectrum Analyzer plot visualizes the spectrum over time?

  • A. Waterfall
  • B. Real-Time FFT
  • C. Duty Cycle
  • D. Utilization
Show answer and explanation ▾

Correct answer: A

A Waterfall plot stacks successive sweeps with time on one axis and frequency on the other, using color for amplitude, so it shows how the spectrum changes over time.

Why the other options are wrong:

  • B. Real-Time FFT shows the current amplitude across frequency, not a history over time.
  • C. Duty Cycle shows how busy each frequency is, not a time history of the spectrum.
  • D. Utilization summarizes how busy a channel is, not the spectrum over time.

Question 12

Which of the following statements is true regarding A-MSDUs and A-MPDUs?

  • A. A-MSDUs and A-MPDUs will be shown in a protocol analyzer in their un-aggregated forms as separate frames.
  • B. A-MSDUs will be shown in a protocol analyzer in their un-aggregated forms as separate frames, whereas A-MPDUs will be displayed as aggregated frames.
  • C. A-MPDUs will be shown in a protocol analyzer in their un-aggregated forms as separate frames, whereas A-MSDUs will be displayed as aggregated frames.
  • D. A-MSDUs and A-MPDUs cannot be displayed in protocol analyzers.
Show answer and explanation ▾

Correct answer: C

An A-MPDU is a group of complete MPDUs, each with its own MAC header, so an analyzer lists them as separate frames. An A-MSDU packs several MSDUs inside one MPDU with one MAC header, so it appears as a single aggregated frame.

Why the other options are wrong:

  • A. A-MSDUs share one MAC header and are shown as a single frame.
  • B. This reverses the two aggregation types.
  • D. Protocol analyzers can capture and display both aggregation types.

Question 13

Which statement best describes what you will see when looking at the radio tap header section in a frame decode?

  • A. A decode of the PHY header
  • B. Data rate at which the PHY header was received
  • C. The TX power of the transmitting STA
  • D. Additional information about the received frame supplied by the driver or calculated by the analyzer.
Show answer and explanation ▾

Correct answer: D

The radio tap header is not transmitted over the air. The capture driver or analyzer adds it to each frame to record details about reception, such as signal strength, channel and data rate.

Why the other options are wrong:

  • A. The radio tap header is added locally and is not a decode of the transmitted PHY header.
  • B. It does not report the rate of the PHY header.
  • C. A receiver cannot learn the transmitter's TX power from the radio tap header.

Question 14

You have deployed a new 802.11ac WLAN for a customer who wants to take advantage of 802.11ac standardized Transmit Beamforming. After the installation you perform a protocol capture to confirm Transmit Beamforming is operating as expected.

When analyzing the protocol exchange you observe the beamformer transmits a VHT NDP Announcement frame but you never see the transmitted NDP.

What do you conclude from this behavior?

  • A. NDPs are PHY PPDUs which contain no MPDU and therefore will not be displayed in a protocol analyzer.
  • B. This is normal, 802.11ac includes the NDP within the VHT NDP Announcement.
  • C. This indicates the beamformer is misconfigured.
  • D. This behavior is non-standard and is likely a bug with the current driver.
Show answer and explanation ▾

Correct answer: A

A Null Data Packet is a PPDU made of only the PHY preamble and header, with no MPDU inside. A protocol analyzer displays MAC frames, so the NDP that follows the VHT NDP Announcement does not appear in the trace.

Why the other options are wrong:

  • B. The NDP is a separate transmission that follows the NDP Announcement after a SIFS.
  • C. A missing NDP in the trace is expected and does not indicate misconfiguration.
  • D. This is standard sounding behavior, not a driver bug.

Question 15

After performing a protocol analysis capture on channel 36 you are looking at the radio tap header of a data frame and notice the frame was transmitted at MCS 0 on one spatial stream. At what data rate was the PHY Header for this frame transmitted?

  • A. 1 Mbps
  • B. 2 Mbps
  • C. 6 Mbps
  • D. 6.5 Mbps
Show answer and explanation ▾

Correct answer: C

Channel 36 is in the 5 GHz band, where the PHY header begins with a legacy OFDM preamble and signal field sent at the lowest OFDM rate of 6 Mbps so that all stations can decode it.

Why the other options are wrong:

  • A. 1 Mbps is a DSSS rate used in 2.4 GHz, not in 5 GHz.
  • B. 2 Mbps is a DSSS rate used in 2.4 GHz, not in 5 GHz.
  • D. 6.5 Mbps is the MCS 0 rate of the payload, not the rate of the PHY header.

Question 16

What is used in the PHY header of 802.11ax transmissions to identify stations that are included in an OFDMA RU-based multi-user transmission?

  • A. Station ID
  • B. Station MAC address
  • C. Station IP address
  • D. Station TCP port
Show answer and explanation ▾

Correct answer: A

In an HE multi-user PPDU, the HE-SIG-B field carries a user field for each resource unit, and each user field holds a Station ID derived from the station's association ID.

Why the other options are wrong:

  • B. MAC addresses are carried in the MAC header, not in the PHY header.
  • C. IP addresses are a Layer 3 value and are not part of the PHY header.
  • D. TCP ports are a Layer 4 value and are not part of the PHY header.

Question 17

To what does the channel number displayed in the radio tap header refer?

  • A. Channel the frame was transmitted on
  • B. Channel the frame was captured on
  • C. The channel of the AP to which the protocol analyzer is associated
  • D. The channel reported in the channel field of the PHY header
Show answer and explanation ▾

Correct answer: B

The radio tap header is written by the capturing adapter, so its channel value is the channel the adapter was tuned to when it received the frame. That can differ from the channel the transmitter used.

Why the other options are wrong:

  • A. The capture adapter can hear frames from adjacent channels, so this value does not prove the transmit channel.
  • C. A capturing adapter in monitor mode is not associated to any AP.
  • D. The radio tap header is generated locally and is not read from a field in the PHY header.

Question 18

When the Protected bit in the Frame Control field of the MAC header is set to 0, it always indicates:

  • A. This is an RSN
  • B. Encryption is not enabled for the entire BSS
  • C. The frame body is unencrypted
  • D. The AP is not operating in FIPS mode
Show answer and explanation ▾

Correct answer: C

The Protected bit applies to the individual frame. A value of 0 means the body of that frame is not encrypted, whatever security the BSS uses.

Why the other options are wrong:

  • A. An RSN is advertised in the RSN element, not by a Protected bit of 0.
  • B. Some frames are sent unencrypted even in a BSS that uses encryption.
  • D. FIPS mode is not signaled by the Protected bit.

Question 19

You are exploring the packet decode of an 802.11 data frame and notice the To DS and From DS bits of the Frame Control field are both set to 1.

Assuming the frame does not have a CRC error, what can you conclude about this frame?

  • A. The frame is a retransmission.
  • B. The frame has been transmitted on an Ad-Hoc network.
  • C. This is non-standard 802.11 behavior and this frame must be part of the proprietary feature.
  • D. The frame was transmitted between two WLAN infrastructure devices such as WLAN bridges or Mesh APs.
Show answer and explanation ▾

Correct answer: D

Both bits set to 1 marks a frame that uses all four address fields and travels across a wireless distribution system, as between WLAN bridges or mesh APs.

Why the other options are wrong:

  • A. A retransmission is marked by the Retry bit, not by these two bits.
  • B. Ad-hoc frames have both To DS and From DS set to 0.
  • C. This combination is defined in the 802.11 standard.

Question 20

Which is not a valid interpretation for one of the 4 address fields in the MAC header?

  • A. Source address
  • B. Receiver address
  • C. Transmitter address
  • D. Sender address
Show answer and explanation ▾

Correct answer: D

The four address fields can carry the source address, destination address, transmitter address, receiver address or BSSID. Sender address is not one of the defined interpretations.

Why the other options are wrong:

  • A. Source address is a defined interpretation of an address field.
  • B. Receiver address is a defined interpretation of an address field.
  • C. Transmitter address is a defined interpretation of an address field.

Question 21

In an infrastructure network, which statement is true concerning the “Power Management” bit and “More Data” bit in the Frame Control field of the MAC header?

  • A. The “Power Management” bit should only be set by a client STA and the “More Data” bit should only be set by the AP.
  • B. The “Power Management” bit should only be set by the AP and the “More Data” bit should only be set by a client STA.
  • C. The “Power Management” bit and the “More Data” bit should only be set by the AP.
  • D. The “Power Management” bit and the “More Data” bit should only be set by a client STA.
Show answer and explanation ▾

Correct answer: A

In an infrastructure BSS the AP never sleeps, so only client stations set the Power Management bit to signal their power state. The AP sets the More Data bit to tell a client that more buffered frames are waiting.

Why the other options are wrong:

  • B. This reverses the roles of the client and the AP.
  • C. The AP does not enter power save, so it does not set the Power Management bit.
  • D. The More Data bit is set by the AP to signal buffered frames.

Question 22

Which one of the following protocol analyzer features do not make protocol trace files easier to read?

  • A. Filtering
  • B. Colorization
  • C. Naming nodes
  • D. Packet slicing
Show answer and explanation ▾

Correct answer: D

Packet slicing truncates each captured frame to a set length to save space or leave out payload data. It does nothing to make the trace easier to read.

Why the other options are wrong:

  • A. Filtering hides unwanted frames, which makes a trace easier to read.
  • B. Colorization highlights frame types or conversations, which makes a trace easier to read.
  • C. Naming nodes replaces MAC addresses with friendly names, which makes a trace easier to read.

Question 23

A Management frame body is made up on which two components?

  • A. Fields and elements
  • B. Flags and fields
  • C. Preambles and headers
  • D. Headers and footers
Show answer and explanation ▾

Correct answer: A

A management frame body carries fixed-length fields, which appear first, followed by variable-length elements, each with an element ID and a length.

Why the other options are wrong:

  • B. Flags are bits inside fields and are not one of the two components of the frame body.
  • C. Preambles and headers belong to the PHY and MAC framing, not to the frame body.
  • D. Headers and footers surround the frame body and are not part of it.

Question 24

A STAs Network Allocation Vector (NAV) is updated by which field in RTS and CTS frames?

  • A. NAV
  • B. Length
  • C. Timestamp
  • D. Duration
Show answer and explanation ▾

Correct answer: D

The Duration field in RTS and CTS frames states how long the medium is reserved for the rest of the exchange. Stations that hear the frame set their NAV timer to that value.

Why the other options are wrong:

  • A. NAV is a timer kept by each station, not a field in the frame.
  • B. Length is not the field that sets the NAV.
  • C. RTS and CTS frames do not carry a Timestamp field.

Question 25

Where, in an 802.11 Beacon frame, will you see the parameters used for QoS in the BSS?

  • A. QoS Control field in the MAC Header
  • B. QoS field in PHY header
  • C. WMM Information Element
  • D. EDCA Information field in the MAC Header
Show answer and explanation ▾

Correct answer: C

An AP advertises the QoS settings for the BSS, including the EDCA values for each access category, in the WMM element carried in the Beacon frame body.

Why the other options are wrong:

  • A. The QoS Control field appears in QoS Data frames, not in Beacon frames.
  • B. The PHY header has no QoS field.
  • D. The MAC header has no EDCA Information field.

Question 26

The ABC organization has recently installed an 802.11ac wave 2 network. They have seen no improvement in the WLAN performance. The network administrator has noticed that his Wi-Fi client is not using 802.11ac data rates and has asked you to troubleshoot the issue. After examining the Beacon frames from the APs, you are able to explain the problem.

Which part of the beacon frame allowed you to troubleshoot this problem?

  • A. The RSN element in the beacon frame indicates that TKIP is the cipher suite used on this network.
  • B. The Supported Data Rates element indicates clients only support lower data rates.
  • C. The Country Code element indicates that only OFDM data rates are available in this region.
  • D. The SSID element is hidden, so client stations are unable to correctly identify the supported data rates.
Show answer and explanation ▾

Correct answer: A

TKIP is not allowed with HT or VHT data rates. When the RSN element shows TKIP as the cipher suite, clients fall back to legacy rates, so 802.11ac rates are never used.

Why the other options are wrong:

  • B. The Supported Rates element lists the AP's legacy rates and does not describe what clients support.
  • C. The Country element sets regulatory channels and power, and does not limit a region to OFDM rates.
  • D. A hidden SSID does not stop clients from learning the supported data rates.

Question 27

How many address fields does an ACK frame contain?

  • A. 1
  • B. 2
  • C. 3
  • D. 4
Show answer and explanation ▾

Correct answer: A

An ACK frame contains Frame Control, Duration, a single Receiver Address and the FCS. No transmitter address is needed because the ACK follows a SIFS after the frame it acknowledges.

Why the other options are wrong:

  • B. An ACK has no transmitter address, so it does not carry two addresses.
  • C. Three address fields are used in most data and management frames, not in an ACK.
  • D. Four address fields appear in data frames that have both To DS and From DS set to 1, not in an ACK.

Question 28

You have been engaged by ABC corporation to troubleshoot a WLAN problem. Users have been reporting random disconnections. You perform Spectrum Analysis as part of your troubleshooting process and notice a frequency hopping signal across the entire 2.4 GHz band. The signal amplitude is -65 dBm and has a duty cycle of 5%.

What do you conclude about this frequency hopping signal?

  • A. The high amplitude of this signal is overpowering the Wi-Fi clients resulting in the disconnections.
  • B. The low duty cycle means this signal is very unlikely to be the cause of the disconnections.
  • C. Interference from frequency hopping signals always results in client disconnections.
  • D. Only clients with a lower signal strength will be disconnected.
Show answer and explanation ▾

Correct answer: B

A duty cycle of 5 percent means the hopping signal occupies any given frequency for only a small fraction of the time. That leaves the channel free most of the time, so the signal is very unlikely to cause disconnections.

Why the other options are wrong:

  • A. An amplitude of -65 dBm at a 5 percent duty cycle does not overpower Wi-Fi clients.
  • C. Frequency hopping interference does not always result in disconnections.
  • D. Nothing in the measurement shows that only weaker clients are being disconnected.

Question 29

Which one of the following provides the most accurate indication that packets have not been successfully received by the intended recipient?

  • A. CRC errors
  • B. Retries
  • C. Gaps in sequence numbers
  • D. Data packets being sent at low data rates
Show answer and explanation ▾

Correct answer: C

Each new frame from a transmitter takes the next sequence number, so numbers missing from the sequence that reaches the recipient mark frames that did not arrive. A retry or CRC error seen by the analyzer does not prove what the recipient itself received.

Why the other options are wrong:

  • A. CRC errors show what the analyzer failed to decode at its own location, not what the recipient received.
  • B. A retry can follow a lost ACK even when the recipient received the frame.
  • D. Low data rates are a result of rate selection and do not show that a frame was lost.

Question 30

What is the maximum number of client stations that can receive concurrent OFDMA transmissions from an 802.11ax AP in a 20 MHz channel?

  • A. 9
  • B. 4
  • C. 2
  • D. 1
Show answer and explanation ▾

Correct answer: A

A 20 MHz HE channel can be divided into as many as nine 26-tone resource units, and each resource unit can be assigned to a different station.

Why the other options are wrong:

  • B. Four is not the maximum number of resource units in 20 MHz.
  • C. Two is not the maximum number of resource units in 20 MHz.
  • D. One station per transmission describes single-user operation, not OFDMA.

Question 31

After investigating the WMM element in a Beacon Frame you notice the TXOP Limit for the Best Effort access category is set to 0. What does this indicate?

  • A. The frame is corrupted
  • B. New associations will be rejected as the access point has no more capacity
  • C. Only one frame can be transmitted in each Best Effort TXOP
  • D. The AP has no associated STAs using the Best Effort Access Category
Show answer and explanation ▾

Correct answer: C

A TXOP Limit of 0 means a station that wins contention for that access category may send a single frame, then must contend for the medium again.

Why the other options are wrong:

  • A. A TXOP Limit of 0 is a valid value and does not indicate corruption.
  • B. TXOP Limit does not control whether new associations are accepted.
  • D. TXOP Limit does not report how many stations use an access category.

Question 32

Which one of the following devices typically has a 100% duty cycle?

  • A. IoT temperature sensor
  • B. Bluetooth mouse
  • C. Analog video camera
  • D. 802.11ac-based AP
Show answer and explanation ▾

Correct answer: C

An analog video camera transmits a continuous carrier whenever it is powered on, so it occupies its frequency 100 percent of the time.

Why the other options are wrong:

  • A. An IoT temperature sensor transmits brief, infrequent bursts.
  • B. A Bluetooth mouse hops frequencies and transmits in short bursts.
  • D. An 802.11ac AP transmits only when it has frames to send and wins contention.

Question 33

ABC corporation has an 802.11n wireless network and advertises 3 SSIDs on all APs: Corporate, Guest, and BYOD. Both the Guest and the BYOD networks broadcast their

SSIDs but the corporate SSID is hidden. A client transmits a Wildcard\Any Probe Request frame on channel 36. From the client’s location it can decode beacons frames from two of the organization’s APs operating on channel 36.

How many Probe Response frames would you expect this client to decode from ABC corporation’s APs?

  • A. 1
  • B. 2
  • C. 4
  • D. 6
Show answer and explanation ▾

Correct answer: C

A wildcard Probe Request is answered for each SSID that is broadcast, and a hidden SSID is not included. Two APs on channel 36 each answer for Guest and BYOD, which gives four Probe Responses.

Why the other options are wrong:

  • A. Both APs respond, and each responds for more than one SSID.
  • B. Each of the two APs responds for both broadcast SSIDs, not for only one.
  • D. The hidden Corporate SSID does not answer a wildcard Probe Request.

Question 34

In which field of the MAC header would you find the protected bit and retry bit?

  • A. BSS Control
  • B. Sequence Control
  • C. QoS Control
  • D. Frame Control
Show answer and explanation ▾

Correct answer: D

The Frame Control field is the first two octets of the MAC header and holds the flag bits, including Retry and Protected Frame.

Why the other options are wrong:

  • A. BSS Control is not a field in the 802.11 MAC header.
  • B. Sequence Control holds the sequence and fragment numbers.
  • C. QoS Control holds the TID and related QoS subfields.

Question 35

Protocol analyzers require the installation of a customized driver to place a USB adapter into which mode that allows capture of all wireless frames on the channel?

  • A. Peek mode
  • B. Sniffer mode
  • C. Monitor mode
  • D. Analyzer mode
Show answer and explanation ▾

Correct answer: C

Monitor mode lets an adapter receive every 802.11 frame on the channel it is tuned to, without associating to an AP. Many USB adapters need a special driver to enter it.

Why the other options are wrong:

  • A. Peek mode is not the name of the adapter mode used for 802.11 capture.
  • B. Sniffer mode is not the name of the adapter mode a USB capture adapter is placed in.
  • D. Analyzer mode is not an adapter operating mode.

Question 36

When using WMM Power Save (WMM-PS), a client requests buffered data frames by sending which type of frame?

  • A. WMM Poll
  • B. NDP announcement
  • C. Trigger
  • D. More Data
Show answer and explanation ▾

Correct answer: C

With WMM Power Save, the AP buffers data frames and sends them to the client upon its request. The client makes that request by sending a trigger frame, which can be a data frame, and the AP then delivers the buffered frames.

Why the other options are wrong:

  • A. The request in WMM Power Save is made with a trigger frame, and WMM Poll is not the name of that frame.
  • B. An NDP Announcement starts a beamforming sounding exchange and does not request buffered data.
  • D. More Data is a bit in the Frame Control field, not a frame type.

Question 37

Which value does not change per EDCA Access Category?

  • A. AIFSN
  • B. Slot Time
  • C. CWmin
  • D. CWmax
Show answer and explanation ▾

Correct answer: B

Slot time is fixed by the PHY in use and is the same for every access category. EDCA sets AIFSN, CWmin and CWmax separately for each access category.

Why the other options are wrong:

  • A. AIFSN is set separately for each access category.
  • C. CWmin is set separately for each access category.
  • D. CWmax is set separately for each access category.

Question 38

A STA utilizing DCF for medium access, that has been waiting for the medium to become free, must wait for which interframe space following the ACK of the previous frame transmission?

  • A. DIFS
  • B. AIFS
  • C. EIFS
  • D. PIFS
Show answer and explanation ▾

Correct answer: A

Under DCF, a station must find the medium idle for a DIFS after the previous exchange ends, then count down its backoff timer before it transmits.

Why the other options are wrong:

  • B. AIFS is used by EDCA stations, not by DCF.
  • C. EIFS is used after a frame is received with errors.
  • D. PIFS gives priority access, for example to an AP, and is not the DCF wait for a station.

Question 39

Which part of a QoS Data frame can be used to advertise its QoS priority?

  • A. QoS Control
  • B. IP header
  • C. WMM Information Element
  • D. 802.1Q VLAN Tag
Show answer and explanation ▾

Correct answer: A

The QoS Control field in the MAC header of a QoS Data frame contains the TID subfield, which carries the user priority of the frame.

Why the other options are wrong:

  • B. The IP header is an upper-layer header inside the frame body, not the 802.11 field that states the frame's priority.
  • C. The WMM Information Element is carried in management frames, not in QoS Data frames.
  • D. An 802.1Q VLAN tag is part of a wired Ethernet frame, not an 802.11 QoS Data frame.

Question 40

After a successful 802.11ac network deployment you are performing a packet capture and notice many RTS/CTS frames in your trace file regardless of the AP or BSS.

Which of the following is the most likely reason for these RTS/CTS frames?

  • A. There is a hidden node problem.
  • B. This is a denial of service attack.
  • C. Protection mechanisms are enabled.
  • D. The client’s wireless driver needs updating.
Show answer and explanation ▾

Correct answer: C

RTS/CTS seen across every AP and BSS points to protection mechanisms, where stations reserve the medium with frames that older devices can decode before sending at higher rates.

Why the other options are wrong:

  • A. A hidden node problem would affect particular clients, not every AP and BSS.
  • B. A steady pattern of RTS/CTS around normal data exchanges is not a denial of service attack.
  • D. A single client's driver would not cause RTS/CTS in every BSS.

Question 41

Which bit in a neighboring BSS’s Beacon frame will trigger an AP to enable protection mechanism?

  • A. Barker Preamble Mode
  • B. Use Protection
  • C. Non-ERP Present
  • D. Enable Protection
Show answer and explanation ▾

Correct answer: C

The Non-ERP Present bit in the ERP element of a Beacon shows that older, non-ERP stations are nearby. An AP that hears this bit set in a neighboring BSS's Beacon can turn on protection in its own BSS.

Why the other options are wrong:

  • A. Barker Preamble Mode tells stations which preamble length to use.
  • B. Use Protection instructs the stations of that BSS and is not the trigger for a neighboring AP.
  • D. Enable Protection is not a bit in the ERP element.

Question 42

The MAC sublayer references the data unit received from the LLC sublayer as what?

  • A. PSDU
  • B. PPDU
  • C. MSDU
  • D. MPDU
Show answer and explanation ▾

Correct answer: C

The MAC Service Data Unit is the payload handed down from the LLC sublayer to the MAC sublayer. The MAC adds its header and trailer to create an MPDU.

Why the other options are wrong:

  • A. The PSDU is what the PHY receives from the MAC.
  • B. The PPDU is the full unit transmitted by the PHY, including preamble and PHY header.
  • D. The MPDU is the MSDU after the MAC adds its header and FCS.

Question 43

You are using a protocol analyzer to troubleshoot a network and you notice a client frequently sending QoS Null Function frames.

What do you conclude?

  • A. This is normal behavior, these frames are part of the sounding exchanging used for Transmit Beamforming and are called PS-Poll frames
  • B. This is normal behavior; these frames are part of the WMM implementation to ensure Quality or Service and are called announcement frames
  • C. This is normal behavior, these frames are used to flip the Power Management bit in the Frame Control field and are called trigger frames
  • D. This is not normal behavior; the client is misbehaving and consuming valuable airtime
Show answer and explanation ▾

Correct answer: C

QoS Null frames carry no payload. Clients send them to change the Power Management bit and tell the AP their power state, and in WMM Power Save they act as trigger frames, so seeing them often is normal.

Why the other options are wrong:

  • A. PS-Poll is a separate control frame and is not part of beamforming sounding.
  • B. QoS Null frames are not called announcement frames.
  • D. Frequent QoS Null frames are expected from a client using power save.

Question 44

During a successful FT over-the-DS roam, which 802.11 frames are transmitted between the client and the new AP?

  • A. Reassociation Request and Reassociation Response
  • B. 2 Authentication Frames, Reassociation Request and Reassociation Response
  • C. 2 Authentication Frames, Reassociation Request, Reassociation Response and 4-Way Handshake
  • D. 2 Authentication Frames, Reassociation Request, Reassociation Response, 802.1X/EAP exchange and 4-Way handshake
Show answer and explanation ▾

Correct answer: A

In FT over-the-DS, the FT Request and Response are Action frames exchanged with the target AP through the current AP. The only frames sent directly between the client and the new AP are the Reassociation Request and Reassociation Response.

Why the other options are wrong:

  • B. The two Authentication frames are used in over-the-air FT, not over-the-DS.
  • C. FT removes the separate 4-Way Handshake, and over-the-DS does not use Authentication frames with the new AP.
  • D. FT avoids a full 802.1X/EAP exchange and a separate 4-Way Handshake when roaming.

Question 45

Which piece of information must be transmitted in a Reassociation Request frame for a PMK Caching roam to be successful?

  • A. PMK
  • B. PMKID
  • C. PTK
  • D. PTKID
Show answer and explanation ▾

Correct answer: B

The client places the PMKID in the RSN element of its Reassociation Request. The AP matches that identifier to a cached PMK and skips the full 802.1X/EAP exchange.

Why the other options are wrong:

  • A. The PMK itself is never transmitted over the air.
  • C. The PTK is derived during the 4-Way Handshake and is never transmitted.
  • D. PTKID is not a defined 802.11 identifier.

That was 45 of 120.

The full CWNP CWAP-405 CWAP pack has all 120 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack

Not ready yet? Get the first 46 free as one PDF by email. Get the Half Pack →

About the CWAP-405 exam

These 45 CWNP CWAP-405 CWAP questions are free here. The free PDF has 46, free by email.

They are drawn from the same bank as the full CWAP-405 pack, which has 120 questions in total.

Back to blog