Citrix 1Y0-312 Practice Questions with Explanations
Free Citrix 1Y0-312 practice questions. 51 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
1Y0-312 practice questions
Question 1
Scenario: There are two domains in an organization: Domain A and Domain B. A Citrix Engineer configured SAML authentication for Domain A, without implementing Citrix Federated Authentication Service (FAS).
While launching the Citrix apps, the Single Sign-on will __________.
- A. work for users from Domain A and NOT for users from Domain B
- B. work for users from Domain B and NOT for users from Domain A
- C. work for the users from Domain A and Domain B
- D. NOT work for the users from Domain A and Domain B
Show answer and explanation ▾
Correct answer: B
SAML sign-in does not give the session a domain password, and the Federated Authentication Service is what supplies the certificate for single sign-on. With SAML set up only for Domain A and no FAS, Domain A users lose single sign-on, while Domain B users are not affected.
Why the other options are wrong:
- A. This reverses the effect: the users on the SAML setup are the ones who lose single sign-on without FAS.
- C. Single sign-on does not work for the SAML users of Domain A without FAS, so it cannot work for both domains.
- D. Users from Domain B are not on the SAML setup, so their sign-on is not affected.
Question 2
Scenario: A Citrix Engineer is managing a large environment with multiple locations. The setup is as follows: - The setup has a single Citrix Virtual Apps and Desktops site with multiple zones such as a Primary zone and 3 Satellite zones. -Virtual Delivery Agents (VDAs) are available for all applications in all 3 Satellite zones. -An application 'app1' has its application database located in Satellite zone. -As a sovereign mandate, it is desirable that this application database should NOT be accessible from zones 2 and 3. -The application does NOT create any database cache and cannot work if the database is NOT reachable. -The outage is acceptable for complying with the sovereign mandate. Which zone preference should the engineer configure to achieve this setup?
- A. Mandatory application home to Satellite zone 1
- B. User home to Satellite zone 1
- C. Mandatory user home to Satellite zone 1
- D. Application home to Satellite zone 1
Show answer and explanation ▾
Correct answer: A
A mandatory application home zone keeps launches of the application inside Satellite zone 1, so zones 2 and 3 never reach its database. If zone 1 is unavailable the application is unavailable, which the scenario accepts.
Why the other options are wrong:
- B. User home follows where the user is, not where the application and its database sit.
- C. A mandatory user home zone is tied to the user, so it does not stop other zones launching the application.
- D. Application home without the mandatory setting lets launches fall back to other zones, which breaks the sovereign mandate.
Question 3
Scenario: A Citrix Engineer noticed that a Citrix Virtual Apps and Desktops environment lost connection to the SQL servers where the Citrix databases are running. Due to this, the Site has become unmanaged and first-time users CANNOT connect to their Citrix Virtual Apps & Desktops resources.
The setup was recently upgraded from Citrix Virtual Apps and Desktops 7.11 to Citrix Virtual Apps and Desktops 7.15 CU4.
What should the engineer do to minimize the impact of the SQL outage?
- A. Enable Connection Leasing.
- B. Enable IntelliCache.
- C. Enable Local Host Cache.
- D. Configure Citrix Database Cache.
Show answer and explanation ▾
Correct answer: C
Local Host Cache lets a Delivery Controller keep brokering sessions when the site database is unreachable, including for first-time users. It is the feature available in version 7.15 CU4 for this outage.
Why the other options are wrong:
- A. Connection leasing was replaced by Local Host Cache and is not the feature to use on 7.15.
- B. IntelliCache is a storage optimisation for hypervisors and does not help during a database outage.
- D. There is no Citrix database cache setting that keeps brokering running during an SQL outage.
Question 4
A Citrix Engineer wants to enable the "Log Off Web Portal
When Session is Launched" feature within Workspace Environment Management (WEM) transformer settings.
What does the engineer need to do prior to enabling this feature?
- A. Set Workspace control to NOT automatically reconnect to the sessions when users log onto StoreFront.
- B. Set Workspace control settings to log off from session when users log off from StoreFront.
- C. Set Workspace control to automatically reconnect to the sessions when users log onto StoreFront.
- D. Set Workspace control settings to NOT log off a session when users log off from StoreFront.
Show answer and explanation ▾
Correct answer: D
The Log Off Web Portal option ends the web portal session once the session launches. Workspace control must therefore not be set to log off sessions when the user logs off StoreFront, or the launched session would close too.
Why the other options are wrong:
- A. Stopping automatic reconnection is a different workspace control setting and is not the prerequisite.
- B. Logging off sessions when users log off StoreFront would close the launched session, the opposite of what is needed.
- C. Automatic reconnection on StoreFront logon is not the prerequisite for this feature.
Question 5
Which three layers can a Citrix Engineer include in an image template? (Choose three.)
- A. Platform
- B. OS
- C. User
- D. Application
- E. Elastic
Show answer and explanation ▾
Correct answer: A, B, D
An image template in App Layering combines a platform layer, an OS layer and application layers. User and elastic layers are assigned to users separately and are not part of the image template.
Why the other options are wrong:
- C. User layers hold individual user data and are attached outside the image template.
- E. Elastic layers are attached at sign-in rather than built into the image template.
Question 6
Which two statements are true for a Workspace Environment Management (WEM) configuration set? (Choose two.)
- A. A WEM Agent can point to more than one WEM configuration set.
- B. The Environmental Settings within the WEM Administration Console are per machine, NOT per user.
- C. Multiple configuration sets are needed in cases of different global settings for different agents.
- D. A configuration set is related to a Citrix Virtual Desktops site and is NOT an independent entity.
Show answer and explanation ▾
Correct answer: B, C
A configuration set is an independent container of WEM settings, and each agent is bound to one set. Environmental Settings in a set apply to the machines bound to it and cannot be assigned to individual users, so agents that need different global settings need separate configuration sets.
Why the other options are wrong:
- A. A WEM Agent is bound to a single configuration set at a time.
- D. A configuration set is an independent logical container and is not tied to a Citrix Virtual Desktops site.
Question 7
Which command should a Citrix Engineer use to review recent connections and brokering attempts within a Citrix Virtual Apps and Desktops site?
- A. Get-BrokerConnection
- B. Get-BrokerSession
- C. Get-BrokerConnectionLog
- D. Get-BrokerSessionLog
Show answer and explanation ▾
Correct answer: C
Get-BrokerConnectionLog returns the Broker Service log of recent connection and brokering attempts, including the user, machine, time and whether each attempt failed, which makes it the cmdlet for reviewing recent launch activity in the site.
Why the other options are wrong:
- A. Get-BrokerConnection is not the cmdlet that returns the log of recent brokering attempts.
- B. Get-BrokerSession lists sessions that currently exist, not the history of connection attempts.
- D. Get-BrokerSessionLog is not the cmdlet that returns the log of recent brokering attempts.
Question 8
What is a Citrix App Layering recipe?
- A. Documented sequence of steps for integrating applications into Citrix App Layering
- B. Scripts to automate the deployment of a Citrix App Layering infrastructure
- C. Scripts to automate the deployment of applications into Citrix App Layering
- D. Documented sequence of step for installing a Citrix App Layering infrastructure
Show answer and explanation ▾
Correct answer: A
An App Layering recipe is a documented set of steps and tips for packaging a particular application into a layer. Recipes record what worked for applications that need special handling, so other administrators can repeat the same sequence.
Why the other options are wrong:
- B. A recipe is documentation, not a script, and it does not cover deploying the App Layering infrastructure.
- C. A recipe is a documented procedure, not an automation script.
- D. Recipes describe how to layer applications, not how to install the App Layering infrastructure.
Question 9
Which file is used to store a subscription on the Storefront server?
- A. PersistentDictionary.edb
- B. Web.config
- C. Subscription.txt
- D. Style.csv
Show answer and explanation ▾
Correct answer: A
StoreFront keeps user subscriptions in a local Extensible Storage Engine database on each server, and the data file for that database is PersistentDictionary.edb. The Citrix Subscriptions Store service reads and writes this file.
Why the other options are wrong:
- B. Web.config holds configuration for the StoreFront web applications, not subscription data.
- C. Subscription.txt is not the file StoreFront uses as its subscription database.
- D. Style.csv is not the file StoreFront uses as its subscription database.
Question 10
Which database high availability option does Citrix recommend for Workspace Environment Management (WEM)?
- A. Always On
- B. Mirroring
- C. Replication
- D. Clustering
Show answer and explanation ▾
Correct answer: A
Citrix names SQL Server Always On availability groups as the option for WEM database high availability, so Always On is the recommended choice.
Why the other options are wrong:
- B. Database mirroring is not the high availability option Citrix recommends for the WEM database.
- C. Replication is not the high availability option Citrix recommends for the WEM database.
- D. Clustering is not the high availability option Citrix recommends for the WEM database.
Question 11
Scenario: A Citrix Engineer is managing a large Citrix Virtual Apps and Desktops environment with three sites. Users connecting to applications and VDI machines in these sites are using a common Citrix ADC Gateway. The engineer wants to configure peripheral federation and port redirection policies for secure access to the site resources.
Which feature should the engineer use to configure policies centrally only once and avoid configuring them on each site?
- A. SmartAccess
- B. SmartCheck
- C. SmartTools
- D. SmartControl
Show answer and explanation ▾
Correct answer: D
SmartControl lets ICA policies for items such as peripheral redirection and port redirection be defined once on the Citrix ADC Gateway. Because the settings are enforced at the Gateway, they apply to every site behind it without being repeated in each site.
Why the other options are wrong:
- A. SmartAccess passes endpoint results to each site, where the matching policies still have to be configured site by site.
- B. SmartCheck is a health check service for sites and does not configure session redirection policies.
- C. Smart Tools is a set of automation and health services and does not configure session redirection policies at the Gateway.
Question 12
Scenario: An existing setup of session recording has stopped working. After investigating, a Citrix Engineer finds that the Session Recording Agent cannot connect to the Session Recording Server. The following error is displayed:
"The underlying connection was closed. Could not establish a trust relationship for the SSL/TLS secure channel. "
Which two issues could cause this error? (Choose two.)
- A. The Session Recording server is down or unavailable to accept requests.
- B. The sessions are started but a request for a record policy evaluation was NOT made.
- C. The server hosting the Session Recording Agent does NOT have a CA certificate.
- D. The Session Recording server is using a certificate signed by a CA that the server hosting the Session Recording Agent does NOT trust.
Show answer and explanation ▾
Correct answer: C, D
The error means the agent could not validate the server certificate during the TLS handshake. That happens when the agent machine has no CA certificate installed to validate it, or when the Session Recording Server certificate was issued by a CA that the agent machine does not trust.
Why the other options are wrong:
- A. A server that is down produces a connection failure, not a certificate trust error.
- B. A missing policy evaluation request is not a certificate problem and does not produce a TLS trust error.
Question 13
Scenario: A Citrix Engineer is maintaining a Citrix Virtual Apps environment. The engineer has recently noticed two single-threaded applications consistently consuming 25% of the CPU resources, causing substantial performance issues for users of these servers. The engineer has deployed
Workspace Environment
Management (WEM) within the infrastructure and enabled CPU Spikes Protection.
What else can the engineer enable within WEM to address this issue?
- A. Exclude Specified Processes and add the two problem applications
- B. Process Affinity and add the two problem applications
- C. CPU Clamping and set it to 10% for the two problem applications
- D. Limit Sample Time and set it to 10% for the two problem applications
Show answer and explanation ▾
Correct answer: C
CPU clamping in WEM prevents a process from using more than a specified percentage of the CPU's processing power. Clamping the two applications at 10% caps what each can consume, which CPU Spikes Protection alone has not done.
Why the other options are wrong:
- A. Excluding the processes removes them from CPU management, so they would keep consuming the same CPU.
- B. Process Affinity sets which cores a process may use and does not cap how much CPU a single-threaded process takes.
- D. Limit Sample Time is the length of time a process must exceed the CPU usage limit before its priority is lowered, not a percentage cap for an application.
Question 14
Which service on the StoreFront server is responsible for replication of user subscriptions?
- A. Citrix Configuration Replication
- B. Citrix Service Monitor
- C. Citrix Credential Wallet
- D. Citrix Subscriptions Store
Show answer and explanation ▾
Correct answer: D
The Citrix Subscriptions Store service holds the user subscription data on each StoreFront server and replicates it to the other servers in the server group, so users see the same favorites whichever server handles them.
Why the other options are wrong:
- A. Citrix Configuration Replication propagates configuration changes between servers in the group, not user subscriptions.
- B. Citrix Service Monitor does not replicate user subscriptions.
- C. Citrix Credential Wallet stores user credentials for authentication, not subscription data.
Question 15
Which PowerShell cmdlet is used to check the connection string, which connects the Citrix Delivery Controller to communicate to the site database?
- A. Get-BrokerServiceInstance
- B. Get-BrokerDbconnection
- C. Get-BrokerConnectionLog
- D. Get-BrokerInstalledDbVersion
Show answer and explanation ▾
Correct answer: B
Get-BrokerDBConnection returns the database connection string that the Broker Service on the Delivery Controller uses to reach the site database, so it is the cmdlet for checking that string.
Why the other options are wrong:
- A. Get-BrokerServiceInstance lists the service instances the Broker Service publishes, not the database connection string.
- C. Get-BrokerConnectionLog returns recent brokering attempts, not the database connection string.
- D. Get-BrokerInstalledDBVersion reports the database schema version, not the connection string.
Question 16
Which three considerations are accurate regarding the Enterprise Layer Manager (ELM) server? (Choose three.)
- A. It hosts the SMB file share for the Elastic Layers data.
- B. It manages and maintains copies of all layers and layered images.
- C. It is a Windows-based virtual appliance maintained on the hypervisor.
- D. It hosts the Citrix App Layering Management Web Console.
- E. It coordinates all communication within the Citrix App Layering imaging process.
- F. It hosts the secondary file share for User Layer profile data.
Show answer and explanation ▾
Correct answer: B, D, E
The Enterprise Layer Manager appliance stores master copies of all layers and layered images in its repository, hosts the App Layering management web console, and coordinates communication between connectors, packaging machines and the hypervisor during imaging.
Why the other options are wrong:
- A. Elastic Layers are served from a separate SMB network file share, not from the appliance.
- C. The appliance is a Linux-based virtual appliance, not a Windows-based one.
- F. User Layer data is kept on network file shares outside the appliance.
Question 17
In which two ways can a Citrix Engineer encrypt communication between the Virtual Delivery Agent (VDA) machines and Citrix Workspace app?
(Choose two.)
- A. Install a certificate on the Delivery Controllers.
- B. Enable TLS on the VDA machines.
- C. Install a certificate on the VDA machines.
- D. Enable TLS on the StoreFront servers.
Show answer and explanation ▾
Correct answer: B, C
Encrypting the HDX connection between Citrix Workspace app and the VDA requires a server certificate installed on each VDA machine and TLS enabled on the VDA, so the session traffic itself is protected end to end.
Why the other options are wrong:
- A. A certificate on the Delivery Controllers secures traffic to the Controllers, not the session between Workspace app and the VDA.
- D. TLS on StoreFront secures store and web traffic, not the session between Workspace app and the VDA.
Question 18
Which three considerations are accurate when adding Active Directory (AD) objects to a Workspace Environment Management (WEM) Configuration set?
(Choose three.)
- A. Multiple users can be added at the same time by separating names with semicolons.
- B. Individual or multiple AD users can be added to the WEM console but NOT groups.
- C. Machine objects can be added using the Add Object button or Add OU button.
- D. Objects must be configured in WEM before actions can be applied to them.
- E. Item Priority can be assigned to user or OU objects but NOT to machine objects.
Show answer and explanation ▾
Correct answer: A, C, D
Active Directory objects are added to WEM so that the agent can manage them and actions can be applied to them, and several user or group names can be entered at once separated by semicolons. Machines are added with Add Object, or by container with Add OU.
Why the other options are wrong:
- B. Active Directory groups can be added to the WEM console as well as users.
- E. Item Priority is also available for machine objects, not only for users and OUs.
Question 19
How can a Citrix Engineer use Session-Based Computing/Hosted Virtual Desktop (SBC/HVD) Tuning to optimize a user's desktop?
- A. Control user permissions to external drives.
- B. Intelligently modify CPU resource allocation.
- C. Modify settings that improve the user experience.
- D. Enable Single Sign-on to the virtual desktop.
Show answer and explanation ▾
Correct answer: C
SBC/HVD Tuning in WEM applies settings to session-based and hosted virtual desktops that improve the user experience, such as disabling visual effects like drag full windows, smooth scrolling and animations.
Why the other options are wrong:
- A. Access to external drives is not what the SBC/HVD Tuning settings control.
- B. CPU allocation is handled by the CPU Management settings under System Optimization, not by SBC/HVD Tuning.
- D. Single sign-on to the desktop is not part of the SBC/HVD Tuning settings.
Question 20
A Citrix Engineer can use ___________ and ___________ to optimize the performance of Windows workloads. (Choose two.)
- A. Citrix Workspace Environment Management (WEM)
- B. Citrix Studio
- C. Citrix Optimizer
- D. Citrix Director
- E. Citrix App Layering
Show answer and explanation ▾
Correct answer: A, C
Workspace Environment Management optimizes CPU, memory and I/O use and speeds up logons at run time, while Citrix Optimizer applies templates that turn off unneeded Windows services and features. Together they tune the performance of Windows workloads.
Why the other options are wrong:
- B. Citrix Studio configures and manages the site and is not a workload optimization tool.
- D. Citrix Director monitors and troubleshoots sessions and does not optimize the Windows workload.
- E. Citrix App Layering manages operating system and application layers and is not a performance optimization tool.
Question 21
A Citrix Engineer is using the Citrix Profile Management Health Status feature within the Workspace Environment Management (WEM) environment.
Which file should the engineer review for results of these health checks to identify specific issues?
- A. AuthManConfig.xml
- B. UpmConfigCheckOutput.xml
- C. UserProfileManager.log
- D. #_pm_config.log
Show answer and explanation ▾
Correct answer: B
The Profile Management health check run by the WEM agent writes its results to UpmConfigCheckOutput.xml, so that file lists the checks performed and any specific configuration issues found.
Why the other options are wrong:
- A. AuthManConfig.xml is a Citrix Workspace app authentication configuration file, not the health check output.
- C. UserProfileManager.log is not where the WEM health check writes its results.
- D. A #_pm_config.log file is not where the WEM health check writes its results.
Question 22
Scenario: A large company recently acquired a smaller company. A Citrix Engineer needs to add more resources in the environment, so that all users can access the published resources.
The engineer has planned to add six more StoreFront servers to the existing StoreFront server group with four StoreFront servers.
The engineer found that the scalability declined after reaching the seventh StoreFront.
What should the engineer increase in the StoreFront server group to prevent issues in the scalability?
- A. The RAM for the initial StoreFront servers before adding more servers.
- B. The CPUs allocated to the initial StoreFront servers, before adding more servers.
- C. The RAM for the six new StoreFront servers.
- D. The CPUs allocated for the six new StoreFront servers.
Show answer and explanation ▾
Correct answer: B
When adding more servers no longer improves a StoreFront server group, capacity is raised by scaling up the servers already in it. Allocating more CPUs to the initial StoreFront servers lets them handle more requests before further servers are added.
Why the other options are wrong:
- A. More RAM on the initial servers is not the increase that addresses the scalability decline.
- C. More RAM on the six new servers is not the increase that addresses the scalability decline.
- D. Adding CPUs only to the six new servers leaves the initial servers of the group unchanged.
Question 23
Which two statements are true regarding the creation of OS Layers with Citrix App Layering? (Choose two.)
- A. When there is a need to update the OS of a layered image, it is ideal to create a new OS Layer.
- B. Virtual machines built as the OS Layer should be joined to a functional Active Directory domain within the infrastructure that will be utilized.
- C. The Windows Updates feature should be left enabled within the OS Layer in case any new updates occur once the OS Layer is deployed.
- D. Any Microsoft products that are updated by the Windows Updates feature should be included in the OS Layer.
- E. For best performance, complete a clean installation of the Windows operating system when building an OS Layer.
Show answer and explanation ▾
Correct answer: D, E
An OS Layer performs best when it starts from a clean installation of Windows. Microsoft products that Windows Update services, along with the updates themselves, belong in the OS Layer so they are patched in one place through new layer versions.
Why the other options are wrong:
- A. An operating system update is delivered by adding a new version to the existing OS Layer, not by creating a new OS Layer.
- B. The OS Layer machine is not joined to an Active Directory domain.
- C. Windows Updates are turned off in the OS Layer and applied by the administrator through new layer versions.
Question 24
Scenario: A Citrix Engineer is working on an existing Citrix Virtual Apps and Desktops environment with two Delivery Controllers each in Primary zone and Secondary zone located in two different datacenters respectively. Due to an outage in the Primary zone datacenter, both Delivery Controllers in the Primary zone failed to start.
Which three statements will be true in this scenario? (Choose three.)
- A. Site performance will increasingly degrade until the Delivery Controllers in the Primary zone become available.
- B. Connections to Virtual Delivery Agent (VDA) machines in the Secondary zone cannot be made.
- C. Studio cannot connect to the site.
- D. Connections to Virtual Delivery Agent (VDA) machines in the Primary zone cannot be made.
- E. Existing sessions in the Primary zone will be disconnected.
Show answer and explanation ▾
Correct answer: A, C, D
The Primary zone holds the site database and the Controllers that use it. When that zone is unavailable, Studio cannot connect to the site, connections to VDAs in the Primary zone cannot be made, and site performance degrades increasingly until the Primary zone Controllers return.
Why the other options are wrong:
- B. VDAs in the Secondary zone register with the Controllers in that zone, so connections to them can still be made.
- E. Existing sessions are not disconnected by the loss of the Delivery Controllers.
Question 25
Which three layers are stored in the storage repository of the Enterprise Layer Manager (ELM) Appliance? (Choose three.)
- A. Application
- B. User
- C. Platform
- D. OS
- E. Elastic
Show answer and explanation ▾
Correct answer: A, C, D
The Enterprise Layer Manager appliance keeps OS Layers, Platform Layers and Application Layers in its local storage repository. These are the layers an administrator builds and then combines when publishing.
Why the other options are wrong:
- B. User Layers are stored on network file shares, not in the appliance repository.
- E. Elastic delivery uses copies of App Layers placed on a network file share, not a separate layer type held in the appliance repository.
Question 26
Which three pre-requisites should a Citrix Engineer take into consideration when configuring Smart Card authentication in the Citrix Virtual Apps and Desktops environment? (Choose three.)
- A. Install the vendor's Smart Card middleware on the virtual or physical machines running the Virtual Delivery Agent (VDA) that provide user's desktops and applications.
- B. Enable pass-through with Smart Card authentication to ensure Smart Card readers type, middleware type and configuration, and middleware PIN caching policy permit this.
- C. Enable a two-way trust relationship with the StoreFront server and the domain.
- D. Ensure that the public-key infrastructure (PKI) is configured appropriately.
- E. Ensure that Domain Passthrough authentication for the Store is on the StoreFront server.
Show answer and explanation ▾
Correct answer: A, B, D
Smart card logon depends on a correctly configured public-key infrastructure and on the vendor middleware being installed on the VDA machines. Pass-through with smart cards also needs the reader type, the middleware type and configuration, and the PIN caching policy to permit it.
Why the other options are wrong:
- C. A two-way trust between the StoreFront server and the domain is not a smart card prerequisite.
- E. Domain pass-through is a different authentication method and is not required for smart card authentication.
Question 27
What does a Citrix Engineer need to consider when upgrading the Workspace Environment Management (WEM) Administration Console?
- A. The PowerShell command New-DatabaseConfiguration must be run prior to updating the Administration Console.
- B. The Agent must be upgraded prior to upgrading the Administration Console.
- C. The associated .DLL files must be updated using the command-line interface after upgrading the Administration Console.
- D. The infrastructure service and the database must be upgraded prior to upgrading the Administration Console.
Show answer and explanation ▾
Correct answer: D
WEM components are upgraded in a fixed order: the infrastructure services first, then the database, then the Administration Console, and the agents last. The console therefore comes after the infrastructure service and database are upgraded.
Why the other options are wrong:
- A. Running New-DatabaseConfiguration is not a step required before upgrading the Administration Console.
- B. The agents are upgraded after the Administration Console, not before it.
- C. No manual update of .DLL files from the command line is required after the console upgrade.
Question 28
Within Workspace Environment Management (WEM), the engineer needs to increase the default Active Directory search timeout value of __________ under the__________ option of Active Directory Objects to correct this issue.
- A. 1000; Advanced
- B. 1000; Rules
- C. 500; Advanced
- D. 500; Rules
Show answer and explanation ▾
Correct answer: A
The Active Directory search timeout is set under the Advanced option of Active Directory Objects in the WEM console, and its default value is 1000 milliseconds. Raising it gives slow directory lookups more time to finish.
Why the other options are wrong:
- B. The timeout is set under the Advanced option, not under Rules.
- C. The default timeout is 1000, not 500.
- D. The default timeout is 1000, not 500, and the setting is not under Rules.
Question 29
Scenario: A Citrix Engineer needs to use Citrix App Layering to create layered images for use with a Citrix Virtual Apps and Desktops environment. The environment currently has the following (MCS) Machine Creation Services-provisioned images. -Windows 10 Virtual Delivery Agent (VDA) machines with App A, App B, and App C installed -Windows 10 VDA machines with App A and App B installed Application A is a common app that is needed by all users. Application B is a time reporting app needed by all individual contributors, and Application C is a managerial app needed by executives, but restricted from use by everyone else. The environment uses Citrix Hypervisor to host all VDA machines. To meet the minimum requirements while reducing administrative effort, the engineer would need __________ layered image(s), using __________.
- A. 1; an Elastic Layer
- B. 1; a User Layer
- C. 1; no Elastic or User Layers
- D. 2; no Elastic or User Layers
Show answer and explanation ▾
Correct answer: A
One layered image containing App A and App B covers every user. App C is then assigned as an Elastic Layer to the executives only, so it attaches at logon for them and stays unavailable to everyone else, with a single image to maintain.
Why the other options are wrong:
- B. A User Layer holds a user's own data and locally installed applications and does not deliver an administrator-assigned application to a group.
- C. A single image with no Elastic Layer cannot both provide App C to executives and keep it from everyone else.
- D. Two images meet the requirement but double the publishing and update work.
Question 30
Which User Layer requires the least amount of administrative effort to store user settings limited to Microsoft Outlook data and settings for a hosted shared desktop solution based on Windows Server 2012?
- A. Session Office 365
- B. Citrix Profile Management with Full
- C. Full
- D. Office 365
Show answer and explanation ▾
Correct answer: A
The Session Office 365 layer saves only Outlook data and settings and is the variant built for session hosts, which is what a hosted shared desktop on Windows Server uses. It meets the requirement with the smallest scope to manage.
Why the other options are wrong:
- B. Combining Citrix Profile Management with a Full layer adds components and captures far more than Outlook data.
- C. A Full User Layer captures all user data, settings and locally installed applications, far more than is required.
- D. The Office 365 layer is intended for single-user desktop operating systems, not session hosts.
Question 31
Which command can a Citrix Engineer use to get information about a Citrix Virtual Apps and Desktops setup?
- A. Get-BrokerSite
- B. Get-BrokerController
- C. Get-BrokerDesktop
- D. Get-BrokerSession
Show answer and explanation ▾
Correct answer: A
Get-BrokerSite returns the site object, including the site name, licensing details and site-wide settings, so it is the cmdlet that describes the Citrix Virtual Apps and Desktops setup as a whole.
Why the other options are wrong:
- B. Get-BrokerController returns details of the Delivery Controllers only, not the site as a whole.
- C. Get-BrokerDesktop returns details of individual desktops, not the site.
- D. Get-BrokerSession returns details of user sessions, not the site.
Question 32
Which two statements are true for Workspace Environment Management (WEM) Memory Management? (Choose two.)
- A. WEM will NOT release the process's excess RAM to the page file when the process becomes idle.
- B. WEM can exclude specific processes from being optimized.
- C. WEM calculates how much RAM a process is using and the minimum amount of RAM a process needs.
- D. WEM optimizes specific applications during a desktop session based on priority.
Show answer and explanation ▾
Correct answer: B, C
WEM memory management works out how much RAM a process is using and the minimum it needs, then treats the difference as excess and releases it when the process goes idle. Specific processes can be listed as exclusions so they are never optimized.
Why the other options are wrong:
- A. WEM does release the excess RAM of a process to the page file when the process becomes idle.
- D. Memory management acts on idle processes and does not optimize applications by priority.
Question 33
Scenario: A Citrix Engineer needs to upgrade a large Citrix Virtual Apps and Desktops environment to a higher version. The engineer is looking for information on Delivery Controller and Virtual Delivery Agent (VDA) machine Microsoft hotfixes and service packs along with the site information and the License Server information.
Which tool should the engineer use to extract the required information?
- A. Citrix Diagnostic Facility (CDF) Control
- B. Citrix Director
- C. Citrix Diagnostic Facility (CDF) Monitor
- D. Citrix Scout
Show answer and explanation ▾
Correct answer: D
Citrix Scout collects diagnostic data from Delivery Controllers and VDA machines, including installed Microsoft hotfixes and service packs, site details and License Server information, and packages it for review or upload to Citrix.
Why the other options are wrong:
- A. CDF Control captures diagnostic traces from Citrix components and does not gather hotfix, site and license information.
- B. Citrix Director monitors sessions and site health and does not extract this collection of information.
- C. CDF Monitor works with diagnostic traces and does not gather hotfix, site and license information.
Question 34
Scenario: A Citrix Engineer needs to integrate the current Citrix Gateway with the StoreFront servers. During the wizard setup, the engineer was asked to add two Secure Ticket Authority (STA) servers as Citrix leading practice for high availability.
The engineer should add two __________ servers as STA servers to accomplish this.
- A. Delivery Controller
- B. StoreFront
- C. Citrix Cloud Connector
- D. Domain Controller
Show answer and explanation ▾
Correct answer: A
In a Citrix Virtual Apps and Desktops site, the Secure Ticket Authority runs on the Delivery Controllers. Listing two Delivery Controllers as STA servers on both Citrix Gateway and StoreFront keeps ticketing available if one Controller fails.
Why the other options are wrong:
- B. StoreFront requests STA tickets but does not host the Secure Ticket Authority.
- C. Cloud Connectors act as the STA only in Citrix Cloud service deployments, which is not the setup described.
- D. Domain Controllers do not host the Secure Ticket Authority.
Question 35
Scenario: A Citrix Engineer administering a Citrix Virtual Apps and Desktops environment is experiencing inconsistency with Virtual Delivery Agent (VDA) registration. After much investigation, the engineer determined the issue is resulting from intermittent problems with the Windows services on the VDA machine and the Delivery Controller.
Which set of Citrix services should the engineer troubleshoot to find the root cause?
- A. BrokerAgent.exe and BrokerService.exe
- B. BrokerAgent.exe and Citrix.Host.exe
- C. BrokerService.exe and Citrix.Host.exe
- D. PicaSvc2.exe and BrokerService.exe
Show answer and explanation ▾
Correct answer: A
VDA registration is a conversation between the Citrix Desktop Service on the VDA, which runs as BrokerAgent.exe, and the Citrix Broker Service on the Delivery Controller, which runs as BrokerService.exe. These two services are where registration faults are traced.
Why the other options are wrong:
- B. Citrix.Host.exe is the Host Service that manages hypervisor connections and does not take part in VDA registration.
- C. Citrix.Host.exe does not take part in registration, and this pair leaves out the VDA side service.
- D. PicaSvc2.exe is not the VDA service that handles registration.
Question 36
Scenario: A Citrix Engineer needs to make a change to the OS Layer. The OS Layer is currently used in several layered images that include different application layers.
Which two steps should the engineer take to make the necessary changes to the OS Layer and the layered images while minimizing administrative effort?
(Choose two.)
- A. Update all application layers associated with the existing OS Layer.
- B. Recreate all application layers associated with the existing OS Layer.
- C. Create new templates that include the required layers.
- D. Update the existing OS Layer with the needed changes.
- E. Update all templates that include the existing OS Layer.
- F. Create a new OS Layer with the needed changes.
Show answer and explanation ▾
Correct answer: D, E
A change to the operating system is made by adding a new version to the existing OS Layer. The templates that use that OS Layer are then updated to the new version and republished, and the existing application layers keep working without being rebuilt.
Why the other options are wrong:
- A. Application layers do not need to be updated when a new version is added to their OS Layer.
- B. Application layers do not need to be recreated when their OS Layer gets a new version.
- C. The existing templates can be edited, so creating new templates adds unnecessary work.
- F. A new OS Layer would require all the application layers to be rebuilt for it.
Question 37
Scenario: A Citrix Engineer is managing Virtual Delivery Agent (VDA) registrations in a Citrix Virtual Apps and Desktops environment.
In which two types of deployments will the auto-update policy for VDA registration be self-managed? (Choose two.)
- A. Deployments that use Citrix Provisioning with a write cache drive.
- B. Deployments that use the Delivery Controllers or Controller SIDs policy setting.
- C. Deployments that do NOT use Controller groups.
- D. Deployments that use ListOfSIDs.
Show answer and explanation ▾
Correct answer: B, D
Auto-update keeps the list of Delivery Controllers on each VDA current automatically. Deployments that use ListOfSIDs must turn auto-update off, and deployments that set the Controllers or Controller SIDs policy settings keep those lists current themselves, so both are self-managed.
Why the other options are wrong:
- A. Auto-update is supported with Citrix Provisioning except with server-side cache, where there is no persistent storage for the auto-update cache.
- C. Controller groups are a case where auto-update is turned off, so a deployment without them has no such reason to self-manage.
Question 38
Which two statements are true regarding the Application Security feature of Workspace Environment Management (WEM)? (Choose two.)
- A. It is recommended to NOT use both WEM Application Security and Windows AppLocker interfaces at the same time to manage rules.
- B. Application Security rules set to "Audit" are still enforced.
- C. Exported Windows AppLocker rules CANNOT be imported into WEM.
- D. It provides control over which applications users are permitted to run on a given machine.
Show answer and explanation ▾
Correct answer: A, D
WEM Application Security lets administrators control which applications users are permitted to run by defining rules, in a way similar to Windows AppLocker. Citrix recommends not using the WEM approach and the AppLocker tools at the same time to manage rules.
Why the other options are wrong:
- B. Rules set to audit are inactive, so a violating application is still allowed to run and is only logged.
- C. Rules exported from Windows AppLocker can be imported into WEM.
Question 39
Which two statements are valid regarding communication of Flexcast Management Architecture (FMA) services with the database? (Choose two.)
- A. Monitoring Service will NOT have an additional separate connection to a secondary database.
- B. Configuration Logging will NOT have an additional separate connection to a secondary database.
- C. Each of the Citrix services establishes its own direct connection to the site database.
- D. Each of the Citrix services use Citrix Configuration Service (CCS) to connect to the site database.
- E. Configuration Logging will have an additional separate connection to a secondary database.
Show answer and explanation ▾
Correct answer: C, E
Each FMA service holds its own direct connection to the site database. The Configuration Logging Service also keeps a separate connection to its own secondary database, the configuration logging database.
Why the other options are wrong:
- A. The Monitoring Service does keep a separate connection to a secondary database, the monitoring database.
- B. The Configuration Logging Service does keep a separate connection to a secondary database.
- D. The services connect to the site database directly and do not route database access through the Configuration Service.
Question 40
Scenario: A Citrix Engineer is maintaining a Citrix Virtual Apps and Desktops environment and has deployed Workspace Environment Management (WEM) within the infrastructure to provide resources to users in their sessions. The engineer initially deployed a Network Printer and it is working correctly for all users in their sessions. Recently, the engineer added a second resource, a Network Share Drive, and users are reporting that it is never available in their sessions.
The engineer verified the Action for this Network Share Drive to ensure it is correctly configured, and the required Conditions are listed under the WEM Filters node. The Everyone group has already been added to the Assignments node within the WEM console.
What should the engineer enable from the Advanced Settings node to correct this issue?
- A. The Agent Options to Enforce Network Drives Filters Processing
- B. The Agent Actions option to Process Virtual Drivers
- C. The Agent Actions option to Process Network Drivers
- D. The Agent Options to Enforce Virtual Drives Filters Processing
Show answer and explanation ▾
Correct answer: C
Under Advanced Settings, the Agent Actions section has a separate processing switch for each action type. The printer works because printer processing is on, and network drives are only mapped once the option to process network drives is enabled.
Why the other options are wrong:
- A. Enforcing filter processing re-evaluates conditions on refresh and does not turn on processing of network drive actions.
- B. Virtual drives are a different action type from network share drives.
- D. This option concerns filters for virtual drives, a different action type from network share drives.
Question 41
In which two situations should a Citrix Engineer consider using Elastic App Layers? (Choose two.)
- A. A few managers need to be able to install applications when accessing a layered image.
- B. Specific applications have compatibility issues and are needed by all users in the company.
- C. A specific suite of applications exhibits performance issues for users.
- D. A specific application is only needed by a few users in the Marketing department.
- E. A number of custom Human Resource applications are utilized by a few managers within the company.
Show answer and explanation ▾
Correct answer: D, E
Elastic Layers attach an application at logon only for the users or groups it is assigned to. That suits applications needed by a small set of people, such as a few Marketing users or managers using custom Human Resources applications, without building extra images.
Why the other options are wrong:
- A. Letting users install their own applications is the purpose of a User Layer, not an Elastic Layer.
- B. An application needed by all users belongs in the layered image rather than an Elastic Layer.
- C. Elastic delivery does not resolve application performance problems.
Question 42
What is the first step in the migration process of an on-premises Workspace Environment Management (WEM) environment that is currently in production to a WEM Citrix Cloud service?
- A. Reinstall the WEM service agent on managed machines.
- B. Export the data within the database to a SQL file.
- C. Download the migration tool from the WEM service Downloads tab.
- D. Modify permissions on the infrastructure service.
Show answer and explanation ▾
Correct answer: C
Migrating an on-premises WEM deployment to the WEM service starts with downloading the migration tool from the WEM service console. The tool then exports the on-premises database to a SQL file that is uploaded to the service.
Why the other options are wrong:
- A. Reinstalling the agent is not the first step, because the process starts with getting the migration tool.
- B. The data is exported with the migration tool, so the tool has to be downloaded first.
- D. Modifying permissions on the infrastructure service is not the first step, because the process starts with getting the migration tool.
Question 43
Which component must a Citrix Engineer use to configure security settings on User Layer folders?
- A. Delivery Controller
- B. Site database
- C. File server
- D. Enterprise Layer Manager (ELM) Server Management console
Show answer and explanation ▾
Correct answer: D
The procedure for securing User Layer folders begins by logging in to the App Layering management console and opening System > User Layer Storage Locations, which is where the storage locations for User Layers are defined. The required permissions are then applied to the folders in each location.
Why the other options are wrong:
- A. The Delivery Controller brokers sessions and does not manage User Layer folders.
- B. The site database stores site configuration and does not manage User Layer folders.
- C. The file server hosts the shares, but the storage locations whose folders need the security settings are identified in the management console.
Question 44
Which two statements are valid when designing a Citrix Cloud Disaster Recovery plan? (Choose two.)
- A. Disaster Recovery for Citrix Cloud includes only the components that are NOT within Citrix Cloud.
- B. Citrix Cloud supports multiple zones.
- C. Citrix Cloud does NOT support multiple resource locations.
- D. Local Host Cache (LHC) would NOT be helpful in a Citrix Cloud setup during a Disaster Recovery scenario.
Show answer and explanation ▾
Correct answer: A, B
Citrix keeps the control plane components inside Citrix Cloud available, so a customer disaster recovery plan covers only the components outside it, such as VDAs, Cloud Connectors and StoreFront. Citrix Cloud supports multiple zones, which map to resource locations.
Why the other options are wrong:
- C. Citrix Cloud does support multiple resource locations.
- D. Local Host Cache on the Cloud Connectors keeps brokering working when the connection to Citrix Cloud is lost.
Question 45
Scenario: A Citrix Engineer is deploying a Citrix Virtual Apps and Desktops environment. The engineer noticed some Virtual Delivery Agent (VDA) machines are having registration issues.
Which three items should the engineer review within the company infrastructure to determine the root cause of the issue? (Choose three.)
- A. Time synchronization (NTP) configuration of the VDA machines with the domain
- B. The SSL certificates on the VDA machines and the Delivery Controller servers
- C. The VDA machines registry setting for ListOfDDCs entries
- D. DNS configurations on either the VDA machines or the Delivery Controller servers
- E. A firewall with a blocked or failing inbound port 8080
Show answer and explanation ▾
Correct answer: A, C, D
Registration uses Kerberos, so the VDA clock must be in sync with the domain. The VDA must also know its Controllers, for example through ListOfDDCs, and both sides must resolve each other correctly in DNS.
Why the other options are wrong:
- B. Registration uses Kerberos authentication by default and does not depend on SSL certificates.
- E. Registration traffic uses port 80 by default, not port 8080.
Question 46
Which statement is true regarding Citrix Workspace Environment Management (WEM) Agent?
- A. WEM Agent synchronizes with the WEM Infrastructure Service on port TCP 8287.
- B. WEM Agent can be installed on the Citrix Workspace Environment Management Infrastructure Services server.
- C. WEM Agent can be installed on either a Windows Desktop OS or on a Windows Server OS.
- D. Norskale Agent Host Service manages WEM Agent and it runs under Network Service.
Show answer and explanation ▾
Correct answer: C
The WEM Agent is supported on both Windows desktop operating systems and Windows Server operating systems, so it can manage single-session VDI machines and multi-session servers alike.
Why the other options are wrong:
- A. The agent connects to the infrastructure service on its agent service port and its cache synchronization port, and TCP 8287 is not the default for either.
- B. Citrix states that the agent must not be installed on the infrastructure server.
- D. The agent host service runs as the LocalSystem account, not as Network Service.
Question 47
A Citrix Engineer wants to setup multi-site configurations, grouping Citrix Virtual Apps and Desktops deployments that deliver the same desktop or application so that identical resources can be aggregated for users.
What are two considerations regarding resources that the engineer needs to consider before setting up multi-site configuration? (Choose two.)
- A. They must have the same name.
- B. They should be delivered from the same site.
- C. They must have the same path on each server to be aggregated.
- D. They must be tagged.
Show answer and explanation ▾
Correct answer: A, C
StoreFront aggregates resources from different deployments into a single icon only when they match. The desktop or application must have the same name and the same path on each server.
Why the other options are wrong:
- B. Aggregation exists to combine matching resources delivered from different deployments.
- D. Tags are not required for resources to be aggregated.
Question 48
Scenario: A Citrix Engineer is working on a Citrix Virtual Apps and Desktops deployment. The engineer is considering implementation of a multizone site instead of multiple sites. Which three benefits of zones can help the engineer to support this decision? (Choose three.)
- A. Zones can help in managing multiple locations without multiple SQL databases.
- B. Zone implementation in a site reduces the dependency of site on site database.
- C. Zones lower the administrative overhead and implementation cost.
- D. Zones help users with fast resource access.
- E. Zones can help in controlling application location launches through zone preference.
Show answer and explanation ▾
Correct answer: A, C, E
A multizone site covers several locations with one site database and one set of management tools, which lowers administrative overhead and implementation cost compared with separate sites. Zone preference also lets the engineer control which zone launches an application.
Why the other options are wrong:
- B. A multizone site still depends on a single site database.
- D. Speed of resource access depends on where the VDAs and data sit, which separate sites provide equally well.
Question 49
Which two components are hosted in Citrix Cloud when using Workspace Environment Management (WEM) service? (Choose two.)
- A. Microsoft SQL Server database
- B. Active Directory Infrastructure
- C. WEM Infrastructure Service
- D. All machines with WEM Agent installed
Show answer and explanation ▾
Correct answer: A, C
With the WEM service, Citrix hosts and maintains the back-end components in Citrix Cloud: the WEM infrastructure services and the database behind them. The customer no longer installs or patches these components.
Why the other options are wrong:
- B. Active Directory stays in the customer's resource location.
- D. Machines running the WEM Agent stay in the customer's resource location.
Question 50
Which two statements are true regarding the Citrix App Layering Management Console? (Choose two.)
- A. It is only supported as an on-premises solution for Citrix App Layering.
- B. It is used to manage system settings for Citrix App Layering.
- C. It is used to add layered images into Citrix Studio.
- D. It is a web-based console that runs on the Enterprise Layer Manager (ELM) server.
- E. It coordinates all communications within the Citrix App Layering environment.
Show answer and explanation ▾
Correct answer: B, D
The App Layering management console is a web-based console hosted on the Enterprise Layer Manager appliance. Administrators use it to create and manage layers and templates and to manage system settings.
Why the other options are wrong:
- A. The appliance and its console are not limited to on-premises hypervisors.
- C. Layered images are published through connectors to a platform or provisioning service, not added to Citrix Studio by the console.
- E. Coordinating communication is the role of the Enterprise Layer Manager appliance, not of the console.
Question 51
Scenario: A Citrix user is accessing a Windows 10 VDI machine using a personal laptop. The VDI is becoming unregistered frequently, which is making it difficult for the user to access it. In order to troubleshoot the issue, a Citrix Engineer is assigned to collect CDF logs.
On which two components should the engineer run Citrix Diagnostic Facility (CDF) control to capture the required logs? (Choose two.)
- A. Windows 10 VDI
- B. Delivery Controller
- C. StoreFront server
- D. User's personal laptop
Show answer and explanation ▾
Correct answer: A, B
Registration takes place between the VDA and the Delivery Controller, so CDF traces are captured on both the Windows 10 VDI machine and the Delivery Controller at the same time to see each side of the failing registration.
Why the other options are wrong:
- C. StoreFront takes no part in VDA registration, so its traces do not show the cause.
- D. The user's laptop takes no part in VDA registration.
That was 51 of 159.
The full Citrix 1Y0-312 pack has all 159 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 52 free as one PDF by email. Get the Half Pack →
About the 1Y0-312 exam
These 51 Citrix 1Y0-312 questions are free here. The free PDF has 52, free by email.
They are drawn from the same bank as the full 1Y0-312 pack, which has 159 questions in total.