Cisco 500-420 CAAPA Practice Questions with Explanations
Free Cisco 500-420 CAAPA practice questions. 23 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
500-420 practice questions
Question 1
Which three pieces of information are required when creating a new database collector? (Choose three.)
- A. Primary table name
- B. Database hostname/IP address
- C. System table name
- D. Database Type
- E. Port number
Show answer and explanation ▾
Correct answer: B, D, E
A database collector needs to know which database to connect to, so you supply its type, the hostname or IP address and the port number. Table names are not part of creating the collector.
Why the other options are wrong:
- A. A primary table name is not requested when you create a database collector.
- C. A system table name is not requested when you create a database collector.
Question 2
What AppDynamics Alert Action does a Performance Analyst need to select to post an AppDynamics event to a third-party collaboration tool?
- A. Make an HTTP Request
- B. Take a thread dump
- C. Create or Update a JIRA Ticket
- D. Run a script or executable on problematic nodes
Show answer and explanation ▾
Correct answer: A
The Make an HTTP Request action sends an HTTP call to an external endpoint, which is how an AppDynamics event is posted to a third-party collaboration tool such as a chat service.
Why the other options are wrong:
- B. Taking a thread dump collects diagnostic data from the JVM and does not notify any outside tool.
- C. Creating or updating a JIRA ticket targets one specific ticketing tool, not a general collaboration tool.
- D. Running a script acts on the monitored nodes and does not post to a collaboration tool.
Question 3
Which two statements are correct about creating Information Points? (Choose two.)
- A. A wildcard can be used to select multiple methods for an Information Point.
- B. A wildcard can be used to select multiple classes for an Information Point.
- C. An Information Point can be created on a class and method that is executed before the Business Transaction entry point.
- D. An Information Point can be created on the same class and method as a Custom Exit Point.
Show answer and explanation ▾
Correct answer: A, C
Information Points can use a wildcard to match multiple methods, and they can be created on a class and method that runs before the business transaction entry point. Information Points are independent of business transaction detection.
Why the other options are wrong:
- B. A wildcard cannot be used to select multiple classes for an Information Point.
- D. An Information Point cannot be created on the same class and method as a custom exit point.
Question 4
A Performance Analyst is experiencing difficulty with the transaction response time on a node. The Performance Analyst attempts to create a health rule monitoring the business transactions’ performance on that node.
Which set of data should the Performance Analyst select when creating the health rule?
- A. Node health
- B. Service endpoints
- C. Error Rates
- D. Transaction performance
Show answer and explanation ▾
Correct answer: A
Node Health is the health rule type scoped to nodes, and its transaction performance metrics include load, response time, slow calls and stalls on each node. It lets the rule watch the business transaction performance of that node.
Why the other options are wrong:
- B. Service endpoints are monitored entry points for a service and are not the data set for node-level transaction performance.
- C. Error rates cover failures and do not measure transaction response time on a node.
- D. Transaction performance evaluates business transactions across the application rather than being scoped to one node.
Question 5
Which item supplements business transaction and transaction analytics data with application data?
- A. Demarcation collectors
- B. Netflow data
- C. Data collectors
- D. Endpoint sensors
Show answer and explanation ▾
Correct answer: C
Data collectors capture application data such as method parameters and HTTP request details and add it to business transaction snapshots and transaction analytics data. This supplements them with application context.
Why the other options are wrong:
- A. Demarcation collectors are not an AppDynamics feature for adding application data.
- B. NetFlow data describes network traffic flows and does not add application data to transactions.
- D. Endpoint sensors are not the feature that supplements business transaction data with application data.
Question 6
Which three Key Performance Indicators (KPIs) are automatically collected when you create an Information Point without adding custom data?
(Choose three.)
- A. Maximum Response Time
- B. CPU Time
- C. Minimum Response Time
- D. Response Time
- E. Errors per Minute
- F. Calls per Minute
Show answer and explanation ▾
Correct answer: D, E, F
An Information Point automatically collects Response Time, Errors per Minute and Calls per Minute without adding custom data. Other values require adding custom metrics from method parameters or return values.
Why the other options are wrong:
- A. Maximum Response Time is not one of the automatically collected indicators.
- B. CPU Time is not one of the automatically collected indicators.
- C. Minimum Response Time is not one of the automatically collected indicators.
Question 7
An E-commerce application is built using microservices architecture design with several components. In AppDynamics, how should the Transaction Detection rules be grouped logically?
- A. Use Automatic Discovery
- B. Use Scope
- C. Use Transaction Group
- D. Use Backend Detection
Show answer and explanation ▾
Correct answer: B
Scopes group transaction detection rules logically, for example by tier, so different microservices can have their own rules. Each scope contains the rules that apply to the selected tiers.
Why the other options are wrong:
- A. Automatic discovery detects transactions on its own and does not group detection rules.
- C. A transaction group aggregates existing transactions and does not organize detection rules.
- D. Backend detection finds downstream services such as databases and does not group transaction detection rules.
Question 8
What are two types of Data Collectors in AppDynamics APM? (Choose two.)
- A. SQL data collectors
- B. HTTP data collectors
- C. Remote Service invocation data collectors
- D. Method invocation data collectors
Show answer and explanation ▾
Correct answer: B, D
AppDynamics APM supports HTTP data collectors, which capture request details, and method invocation data collectors, which capture method parameters, return values and object state. These are the two types in APM.
Why the other options are wrong:
- A. SQL data collectors are not a data collector type in AppDynamics APM.
- C. Remote service invocation data collectors are not a data collector type in AppDynamics APM.
Question 9
Developers and operations personnel complain the Controller tracks many irrelevant Java classes and methods.
How does a Performance Analyst exclude this unhelpful information?
- A. Configuration > Baselines and create a new dynamic baseline
- B. Edit the mbeans-server.xml file to delete the irrelevant methods
- C. Configuration > Instrumentation > Call Graph Settings and exclude irrelevant packages
- D. Edit the controller-info.xml file to exclude irrelevant methods
Show answer and explanation ▾
Correct answer: C
Excluding irrelevant packages under Configuration, Instrumentation, Call Graph Settings stops the Controller from showing those classes and methods in call graphs. This removes the noise without changing the agent files.
Why the other options are wrong:
- A. Dynamic baselines define expected metric behavior and do not control which classes and methods are tracked.
- B. The mbeans-server.xml file configures JMX metrics and is not used to exclude classes and methods.
- D. The controller-info.xml file holds agent connection settings and is not used to exclude methods.
Question 10
A Business Transaction was registered and displayed on the Business Transaction Dashboard. It has continuous load on it. After an hour the Business Transaction stopped being displayed in the Business Transaction Dashboard.
Which action stopped the display of the Business Transaction?
- A. The Business Transaction Lock Down was enabled an hour ago.
- B. The Business Transaction had been deleted an hour ago from the Business Transaction Dashboard.
- C. The Business Transaction Custom Match Rule was deleted an hour ago.
- D. The Business Transaction had been excluded an hour ago from the Business Transaction Dashboard.
Show answer and explanation ▾
Correct answer: C
A business transaction created by a custom match rule keeps being detected only while that rule exists. Deleting the rule means the traffic is no longer matched, so the transaction stops appearing after the existing data ages out.
Why the other options are wrong:
- A. Lock down stops new transactions from being registered but does not remove a transaction that is still receiving load.
- B. A deleted transaction would be registered again while load continues if its detection rule still exists.
- D. Excluding a business transaction hides it at once rather than letting it drop off after its data stops.
Question 11
A Performance Analyst has opened a database collector view.
Which tab should be clicked on next to find slow queries?
- A. Schemas
- B. Queries
- C. Live View
- D. Object Browser
Show answer and explanation ▾
Correct answer: B
The Queries tab in the database collector view lists the queries and their execution times, so the analyst can identify the slow ones. It is the place for query-level performance data.
Why the other options are wrong:
- A. The Schemas tab shows schema information and does not list slow queries.
- C. Live View shows current activity and is not the tab for finding slow queries.
- D. The Object Browser lists database objects and does not rank slow queries.
Question 12
What are two differences between creating a Transaction Group using the 'Create Group' action and defining a Transaction Detection rule?
(Choose two.)
- A. A Transaction Detection Rule changes the name of the incoming request and reduces the number of overall Business transactions.
- B. Create Transaction Group changes the name of the incoming request and reduces the number of overall Business transactions.
- C. A Transaction Group aggregates the data of multiple transactions.
- D. Transaction Groups create Transaction Detection Rules in a faster easier way.
Show answer and explanation ▾
Correct answer: A, C
A transaction detection rule can rename incoming requests and reduce the number of business transactions, while a transaction group only aggregates the data of several existing transactions. The group does not change how transactions are named or detected.
Why the other options are wrong:
- B. Creating a transaction group does not rename incoming requests or reduce the number of business transactions.
- D. Transaction groups do not create detection rules; they aggregate data from existing transactions.
Question 13
What does the Live Preview option in a Business Transaction Discovery Session allow a user to do?
- A. See if new Transaction Discovery Rules work
- B. Provide streaming logs from the application agent
- C. Search classes and methods currently running on the system
- D. Stream entry points in your application
Show answer and explanation ▾
Correct answer: A
Live Preview in a transaction discovery session shows which transactions would be detected, so the user can test whether new discovery rules work before applying them.
Why the other options are wrong:
- B. Live Preview does not stream logs from the application agent.
- C. Searching running classes and methods is not what Live Preview does.
- D. Streaming entry points is not the purpose of Live Preview, which tests discovery rules.
Question 14
Which two Key Performance Indicators (KPIs) accurately provide insight into server level resource consumption? (Choose two.)
- A. Calls per Minute
- B. Availability
- C. Average Response Time
- D. Application Restarts
- E. CPU %Busy
- F. Memory Used%
Show answer and explanation ▾
Correct answer: E, F
CPU %Busy and Memory Used% are machine-level metrics that measure how much server capacity is consumed. They show server resource consumption directly.
Why the other options are wrong:
- A. Calls per Minute measures application load and not server resource use.
- B. Availability reports whether a component is reachable and does not measure resource consumption.
- C. Average Response Time measures speed of transactions and not server resource use.
- D. Application Restarts counts restarts and does not measure resource consumption.
Question 15
Which health rule violation event will be triggered when a Performance Analyst modifies the existing health rule that is already in critical violation?
- A. Health Rule Violation Ended - Critical
- B. Health Rule Violation Started - Critical
- C. Health Rule Violation Canceled - Critical
- D. Health Rule Violation Continues - Critical
Show answer and explanation ▾
Correct answer: D
When a health rule that is already in critical violation is modified and the condition still holds, the Controller raises a Health Rule Violation Continues, Critical event. The violation is still ongoing and has not started again.
Why the other options are wrong:
- A. The violation has not ended, since the condition is still met.
- B. Started applies only when a violation first begins, and this one was already in progress.
- C. Canceled does not apply, since the violation continues after the change.
Question 16
A Performance Analyst received an alert that the Average Response Time is increasing after a new marketing offer was released.
Which metric would quickly help the Performance Analyst determine that users may not be critically impacted?
- A. Errors per Minute increase
- B. Calls per Minute decrease
- C. Errors per Minute decrease
- D. Calls per Minute increase
Show answer and explanation ▾
Correct answer: C
If Errors per Minute falls while response time rises, requests are still completing successfully. Users are seeing slower responses rather than failures, so they may not be critically impacted.
Why the other options are wrong:
- A. An increase in errors per minute would indicate users are experiencing failures.
- B. A decrease in calls per minute could mean users are abandoning the application.
- D. An increase in calls per minute explains the load but does not show whether users are impacted.
Question 17
A Performance Analyst has noticed a significant decrease in an application's workload (calls/min) and is trying to identify the root cause.
Which option will give the Performance Analyst insight into the behavior of the affected Business Transactions?
- A. Review Business Transactions and enable Show Trends
- B. In Metric Browser plot Calls/min for the Application
- C. Review Top Business Transactions by Load in the Application Dashboard
- D. Review the Transaction Score for the Application
- E. Review all elements in the Application Flow Map and identify variations in load
Show answer and explanation ▾
Correct answer: C
Top Business Transactions by Load in the Application Dashboard shows how each business transaction is contributing to load. The analyst can see which transactions changed and so understand the behavior behind the drop in calls per minute.
Why the other options are wrong:
- A. Show Trends displays trend indicators but does not rank transactions by load.
- B. Plotting Calls/min for the whole application shows the drop but not which transactions caused it.
- D. The Transaction Score reflects performance health and not changes in load.
- E. The flow map shows tiers and connections and is less direct than ranking transactions by load.
Question 18
Which two types of data are collected by Information Points? (Choose two.)
- A. Troubleshooting Metric Data
- B. Business Metric Data
- C. Code Metric Data
- D. Analytics Metric Data
Show answer and explanation ▾
Correct answer: B, C
Information Points collect business metric data, such as order values or counts, and code metric data, such as method call counts and response times. They provide both business and code-level visibility.
Why the other options are wrong:
- A. Troubleshooting metric data is not a category of Information Point data.
- D. Analytics metric data is not a category of Information Point data.
Question 19
Which two things should a Performance Analyst check if an agent has failed to register with the Controller after several minutes? (Choose two.)
- A. total free RAM
- B. network/firewall rules
- C. current CPU load average
- D. free license count
Show answer and explanation ▾
Correct answer: B, D
An agent cannot register if network or firewall rules block it from reaching the Controller, or if no licenses are available. These are the two things to verify first.
Why the other options are wrong:
- A. Free RAM does not determine whether an agent registers with the Controller.
- C. CPU load average does not determine whether an agent registers with the Controller.
Question 20
What are two options for sharing snapshot details from the snapshot window? (Choose two.)
- A. Custom Report
- B. Custom Dashboard
- C. Download PDF
- D. Copy to Clipboard
- E. Export
Show answer and explanation ▾
Correct answer: C, E
The snapshot window offers Download PDF and Export for sharing snapshot details. Both produce a file that can be given to others.
Why the other options are wrong:
- A. Custom Report is not an option for sharing from the snapshot window.
- B. Custom Dashboard is not an option for sharing from the snapshot window.
- D. Copy to Clipboard is not an option for sharing from the snapshot window.
Question 21
Within the configuration setting for Slow Transactions, under the "Configure Diagnostic Session Duration and Collection Rate" option, what is the default value pair for the setting "Collect up to ______ snapshots per minute for ______ minutes"?
- A. 2, 2
- B. 5, 5
- C. 10, 10
- D. 4, 4
Show answer and explanation ▾
Correct answer: B
The default diagnostic session setting for slow transactions collects up to 5 snapshots per minute for 5 minutes. Collection stops automatically when the session ends.
Why the other options are wrong:
- A. 2 and 2 is not the default pair for this setting.
- C. 10 and 10 is not the default pair for this setting.
- D. 4 and 4 is not the default pair for this setting.
Question 22
Which option, in addition to "minutes since creation", would a Performance Analyst use while configuring Automatic Cleanup of stale Business Transactions?
- A. Transaction Type
- B. Number of Calls
- C. Regular Expression
- D. Class/Method Filter
Show answer and explanation ▾
Correct answer: B
Automatic cleanup of stale business transactions uses minutes since creation together with a minimum number of calls. Transactions that stay below that call count are removed.
Why the other options are wrong:
- A. Transaction type is not a criterion for automatic cleanup.
- C. A regular expression is not a criterion for automatic cleanup.
- D. A class or method filter is not a criterion for automatic cleanup.
Question 23
A client needs to reference a metric from different applications on an AppDynamics dashboard.
Which of the following is true?
- A. Metrics from different applications cannot be cross referenced or combined on an AppDynamics dashboard
- B. Metrics from different applications can be cross referenced but cannot be combined in a single dashboard
- C. Metrics from different applications cannot be cross referenced on an AppDynamics dashboard
- D. Metrics from different applications can be cross referenced on an AppDynamics dashboard
Show answer and explanation ▾
Correct answer: D
AppDynamics custom dashboards can reference metrics from different applications on the same dashboard. Each widget can be pointed at the application whose metric it displays.
Why the other options are wrong:
- A. Metrics from different applications can be cross referenced and combined on a dashboard.
- B. Metrics from different applications can be shown together on a single dashboard.
- C. Metrics from different applications can be cross referenced on a dashboard.
That was 23 of 64.
The full Cisco 500-420 CAAPA pack has all 64 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 24 free as one PDF by email. Get the Half Pack →
About the 500-420 exam
These 23 Cisco 500-420 CAAPA questions are free here. The free PDF has 24, free by email.
They are drawn from the same bank as the full 500-420 pack, which has 64 questions in total.