Axis Communications ANVE Practice Questions with Explanations
Free Axis Communications ANVE practice questions. 59 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
ANVE practice questions
Question 1
Which device is useful when replacing an analog camera with an IP camera?
- A. Video encoder
- B. PoE splitter
- C. Network relay
- D. Ethernet over coax adapter
Show answer and explanation ▾
Correct answer: A
A video encoder converts the signal from analog cameras into digital video on the IP network. A site can then move to network video step by step, with the remaining analog cameras working in the same system as each new IP camera.
Why the other options are wrong:
- B. A PoE splitter separates power and data for a device without PoE support and has no role in handling analog video.
- C. A network relay switches external equipment on and off and does not carry video.
- D. An Ethernet over coax adapter is a cabling accessory and does not bring analog video into the network video system.
Question 2
Two cameras are streaming 6 Mbit/s each. Approximately how much storage is required to record one hour of video from both streams?
- A. 2.6 GB
- B. 5.4 GB
- C. 11.4 GB
- D. 24.2 GB
Show answer and explanation ▾
Correct answer: B
Two streams of 6 Mbit/s add up to 12 Mbit/s. Over one hour, which is 3,600 seconds, that is 43,200 Mbit, and dividing by 8 gives 5,400 MB, or about 5.4 GB.
Why the other options are wrong:
- A. 2.6 GB is less than even one 6 Mbit/s stream needs for an hour.
- C. 11.4 GB is about twice what a total of 12 Mbit/s produces in one hour.
- D. 24.2 GB is more than four times what a total of 12 Mbit/s produces in one hour.
Question 3
Field of view is determined by
- A. the focal length and the exposure settings
- B. the focal length and the sensor size
- C. the sensor size and the aperture
- D. the exposure settings and the sensor size
Show answer and explanation ▾
Correct answer: B
A camera's field of view comes from its focal length and the size of its image sensor. A shorter focal length or a larger sensor gives a wider view.
Why the other options are wrong:
- A. Exposure settings change brightness and motion blur, not how wide the scene is.
- C. Aperture affects light and depth of field, not the field of view.
- D. Exposure settings do not set the angle of view, so this pair leaves out focal length.
Question 4
Which device allows for displaying digital live video on a monitor?
- A. An exchanger
- B. An encoder
- C. A media converter
- D. A decoder
Show answer and explanation ▾
Correct answer: D
A video decoder takes a digital video stream from the network and decodes it for output to a monitor, so live video can be shown without a PC.
Why the other options are wrong:
- A. An exchanger is not a network video device for driving a monitor.
- B. An encoder works in the opposite direction, turning analog video into a digital stream.
- C. A media converter changes the network medium, such as copper to fiber, and has no video output.
Question 5
What device is used to forward data from one LAN to another?
- A. A hub
- B. A router
- C. A repeater
- D. A firewall
Show answer and explanation ▾
Correct answer: B
A router connects separate networks and forwards packets between them based on IP addresses, so it is the device that moves data from one LAN to another.
Why the other options are wrong:
- A. A hub repeats incoming signals to all ports inside a single LAN.
- C. A repeater regenerates a signal to extend a cable segment within the same network.
- D. A firewall filters traffic according to security rules, and filtering is its purpose, not forwarding between LANs.
Question 6
To ensure optimal performance of outdoor cameras running video analytics, maintenance is:
- A. irrelevant
- B. optional
- C. automated
- D. essential
Show answer and explanation ▾
Correct answer: D
Outdoor cameras collect dirt, water marks and spider webs, and the scene itself changes as vegetation grows. All of this lowers the accuracy of video analytics, so regular cleaning and checks are essential.
Why the other options are wrong:
- A. Maintenance is highly relevant because a dirty or obstructed view directly degrades analytics.
- B. Treating maintenance as optional leads to missed detections and false alarms over time.
- C. Cleaning the front glass and clearing obstructions cannot be automated by the camera.
Question 7
Which cameras have IR LED illumination built-in? (Choose two.)
- A. AXIS Q1951-E
- B. AXIS M1135-E
- C. AXIS Q3615-VE
- D. AXIS M3057-PLVE MkII
- E. AXIS P1378-LE
Show answer and explanation ▾
Correct answer: D, E
In Axis product names the L in the extension stands for built-in LED illumination. AXIS M3057-PLVE Mk II and AXIS P1378-LE both carry the L, so both have integrated IR LEDs.
Why the other options are wrong:
- A. AXIS Q1951-E has only the E extension, which means outdoor-ready.
- B. AXIS M1135-E has only the E extension, which means outdoor-ready.
- C. AXIS Q3615-VE is vandal-resistant and outdoor-ready, with no L for LED illumination.
Question 8
Lowering the shutter speed can produce
- A. increased noise
- B. a darker image
- C. reflections
- D. motion blur
Show answer and explanation ▾
Correct answer: D
A slower shutter speed keeps the sensor exposed for longer, so anything that moves during the exposure is smeared across the frame and appears as motion blur.
Why the other options are wrong:
- A. A slower shutter gathers more light, which reduces the need for gain and therefore does not add noise.
- B. A longer exposure makes the picture brighter, not darker.
- C. Reflections come from light sources and surfaces in the scene, not from the shutter setting.
Question 9
Which sensor has a 1080p resolution?
- A. A 4K sensor
- B. An 8K sensor
- C. A full HD sensor
- D. An HD sensor
Show answer and explanation ▾
Correct answer: C
Full HD is 1920x1080 pixels, which is the resolution referred to as 1080p.
Why the other options are wrong:
- A. A 4K sensor delivers 3840x2160 pixels.
- B. An 8K sensor delivers 7680x4320 pixels.
- D. An HD sensor delivers 1280x720 pixels, known as 720p.
Question 10
When using an external IR illuminator, what can happen if the beam angle is significantly narrower than the field of view?
- A. Focus must be set manually
- B. The exposure may be uneven
- C. Heat can distort the image
- D. The backlight can increase
Show answer and explanation ▾
Correct answer: B
When the illuminator beam is much narrower than the camera's field of view, the middle of the scene is brightly lit while the sides stay dark. The exposure becomes uneven, with glare in the center and under-lit edges.
Why the other options are wrong:
- A. The beam angle of an illuminator has no bearing on how focus is set.
- C. A narrow beam does not create heat distortion in the view.
- D. Backlight comes from bright sources behind the subject, not from a narrow illuminator beam.
Question 11
Which of the following are multi-sensor cameras? (Choose two.)
- A. AXIS P1275
- B. AXIS P1265
- C. AXIS M3077-PVE
- D. AXIS P3807-PVE
- E. AXIS Q3819-PVE
Show answer and explanation ▾
Correct answer: D, E
AXIS P3807-PVE is a fixed dome with four sensors that together give a seamless 180° panoramic overview. AXIS Q3819-PVE is a 14 MP multisensor camera that also stitches the views of four sensors into one 180° panorama.
Why the other options are wrong:
- A. AXIS P1275 is a modular camera, not a multisensor camera.
- B. AXIS P1265 is a modular pinhole camera, not a multisensor camera.
- C. The AXIS M3077 panoramic dome is built around one sensor, so it is not a multisensor camera.
Question 12
When an Axis camera is not behaving as expected, which maintenance functions are available in the camera? (Choose two.)
- A. Return material authorization
- B. Erasing the firmware
- C. Factory default
- D. Disabling the PoE connection
- E. Camera restore
Show answer and explanation ▾
Correct answer: C, E
The maintenance options built into an Axis camera include Restore, which returns most settings to their defaults, and Factory default, which resets all settings including the IP address.
Why the other options are wrong:
- A. Return material authorization is a support process handled with Axis, not a function inside the camera.
- B. Firmware can be upgraded or rolled back, but there is no maintenance function for erasing it.
- D. PoE is supplied by the switch or midspan and is not controlled from the camera's maintenance functions.
Question 13
Which IP rating is most appropriate for an outdoor school playground?
- A. IP54
- B. IP6K9K
- C. IP67
- D. IP42
Show answer and explanation ▾
Correct answer: C
In an IP rating the first digit covers solid particles and the second covers water. IP67 means dust-tight and protected against brief immersion, which suits a camera permanently exposed to rain and dirt outdoors.
Why the other options are wrong:
- A. IP54 gives only partial dust protection and splash protection, a lower level than a permanently exposed outdoor camera should have.
- B. IP6K9K is a rating for high-pressure, high-temperature washdown on road vehicles, which is not the requirement of a playground.
- D. IP42 protects only against small objects and dripping water, which is an indoor level of protection.
Question 14
Which is true about variable bitrate (VBR)?
- A. It dynamically adjusts the frame rate in high-motion scenes
- B. It forces the bitrate to stay at a constant low level
- C. It maintains the image quality, even in high-motion scenes
- D. It helps reduce the bitrate when there is a lot of image noise
Show answer and explanation ▾
Correct answer: C
With variable bitrate the encoder lets the bitrate rise when the scene becomes more complex, such as during a lot of motion, so the video quality stays at the configured level.
Why the other options are wrong:
- A. VBR varies the bitrate, not the frame rate.
- B. Holding the bitrate at a fixed low level describes a constant or capped bitrate, not VBR.
- D. Noise is encoded as detail, so under VBR a noisy scene raises the bitrate.
Question 15
AXIS Site Designer has which feature?
- A. Bandwidth and storage estimation
- B. BIM data summary
- C. Firmware recommendations
- D. Site maintenance planner
Show answer and explanation ▾
Correct answer: A
AXIS Site Designer provides bandwidth estimates for the cameras in a project and uses them to help find the right recording and storage solution.
Why the other options are wrong:
- B. A BIM data summary is not a feature of AXIS Site Designer.
- C. Firmware recommendations are not part of AXIS Site Designer, which is a system design tool.
- D. AXIS Site Designer has no site maintenance planner.
Question 16
What is the maximum power level at the powered device for PoE class 2?
- A. 12.95 W
- B. 30 W
- C. 6.49 W
- D. 15 W
Show answer and explanation ▾
Correct answer: C
A PoE class 2 powered device uses between 3.84 W and 6.49 W, with 7 W guaranteed at the power sourcing equipment. The maximum at the powered device is therefore 6.49 W.
Why the other options are wrong:
- A. 12.95 W is the maximum at the powered device for class 0 and class 3.
- B. 30 W is the power guaranteed at the sourcing equipment for class 4, known as PoE+.
- D. 15 W is close to the 15.4 W that the sourcing equipment supplies for class 3, not a class 2 device limit.
Question 17
Color temperature is measured in
- A. Lumen
- B. Kelvin
- C. Lux
- D. Celsius
Show answer and explanation ▾
Correct answer: B
Color temperature describes how warm or cool a light source appears and is measured in Kelvin. Lower values look reddish and higher values look bluish.
Why the other options are wrong:
- A. Lumen measures luminous flux, the total light emitted by a source.
- C. Lux measures illuminance, the light falling on a surface.
- D. Celsius measures thermal temperature, not the color of light.
Question 18
Which types of reports are available in AXIS Site Designer? (Choose three.)
- A. Installation report
- B. License keys report
- C. Warranty report
- D. Sales quote
- E. Maintenance plan
- F. Bill of materials
Show answer and explanation ▾
Correct answer: A, D, F
AXIS Site Designer generates project documents including the bill of materials, a sales quote built from that bill of materials with editable prices, and an installation report that lists the devices to install.
Why the other options are wrong:
- B. This report type is not a document that AXIS Site Designer generates.
- C. A warranty report is not among the AXIS Site Designer documents.
- E. A maintenance plan is not produced by AXIS Site Designer.
Question 19
In dark scenes, which feature causes the camera to automatically adjust the exposure when an object approaches?
- A. OptimizedIR
- B. Zipstream
- C. Electronic image stabilization
- D. Lightfinder
Show answer and explanation ▾
Correct answer: A
OptimizedIR adapts the built-in IR illumination to the scene, and the camera adjusts the exposure so that nearby or reflective objects in a dark scene stay clearly visible when they come close.
Why the other options are wrong:
- B. Zipstream lowers the bitrate of the video stream and does not control exposure.
- C. This feature compensates for camera shake and does not control exposure.
- D. Lightfinder provides color video in very low light and is not the IR exposure adjustment described.
Question 20
What ensures that unauthenticated, tampered firmware is blocked and rejected during start up?
- A. Factory default
- B. Secure boot
- C. IEEE 802.1AR
- D. TPM module
Show answer and explanation ▾
Correct answer: B
Secure boot checks the signature of each stage of the firmware during start-up and lets the device boot only with authentic, unaltered firmware. Tampered firmware fails the check and is rejected.
Why the other options are wrong:
- A. Factory default resets settings and does not verify the firmware.
- C. IEEE 802.1AR defines a secure device identity used to authenticate the device on a network.
- D. A TPM module protects stored cryptographic secrets and does not by itself validate firmware at start-up.
Question 21
Which are the main benefits of OptimizedIR? (Choose two.)
- A. The IR light has a wavelength of 940 nm
- B. The beam of the IR follows the camera’s field of view
- C. External IR illuminators can be used
- D. Smooth transition between day and night mode
- E. The images do not get overexposed
Show answer and explanation ▾
Correct answer: B, E
OptimizedIR automatically adjusts the intensity and the angle of the IR illumination to match the camera's field of view, and the beam follows the zoom. This prevents hotspots where objects close to the camera appear overexposed, and the whole scene is evenly lit.
Why the other options are wrong:
- A. The wavelength is a property of the LEDs chosen and is not what OptimizedIR provides.
- C. OptimizedIR is built into the camera, so no external illuminator is involved.
- D. Switching between day and night mode is handled by the IR-cut filter and is not a benefit of OptimizedIR.
Question 22
For AXIS P3247-LVE, the last digit represents
- A. the camera type (PTZ)
- B. the camera resolution
- C. the camera series
- D. the number of channels
Show answer and explanation ▾
Correct answer: B
In Axis camera names the last digit of the four-digit number indicates the resolution. The 7 in AXIS P3247-LVE stands for 5 MP up to less than 8 MP.
Why the other options are wrong:
- A. The camera type is given by the first digit of the number, where 3 means a dome camera.
- C. The series is given by the product line letter and the first two digits, here P32.
- D. A channel count appears in video encoder names, not in this camera name.
Question 23
What feature allows a PTZ camera to maintain a sharp image even when it is pointed above the horizon?
- A. Speed dry
- B. Sharpdome
- C. Cleardome
- D. Sharpview
Show answer and explanation ▾
Correct answer: B
With Sharpdome the entire dome moves together with the camera, so the lens always looks through the same optically clear part of the dome. The picture stays sharp in every direction, including above the horizon.
Why the other options are wrong:
- A. Speed dry removes water drops from the dome and does not affect views above the horizon.
- C. Cleardome is not the Axis feature that gives sharp views above the horizon.
- D. Sharpview is not the name of the Axis feature that provides this.
Question 24
The purpose of an IR cut filter is to
- A. avoid unnatural colors in daylight
- B. make use of IR wavelengths in daylight
- C. create a black and white image
- D. stop the camera from producing IR light
Show answer and explanation ▾
Correct answer: A
Camera sensors are sensitive to infrared light, which distorts colors. In day mode the IR-cut filter blocks infrared from reaching the sensor, so daylight colors look natural.
Why the other options are wrong:
- B. The filter blocks IR in daylight and is removed at night when IR is wanted.
- C. Black and white video is the result of night mode, when the filter is moved away.
- D. The filter sits in front of the sensor and has no effect on IR emission.
Question 25
If a customer wants a covert surveillance solution, they should choose
- A. bullet cameras
- B. dome cameras
- C. modular cameras
- D. onboard cameras
Show answer and explanation ▾
Correct answer: B
Dome cameras are discreet. The compact housing blends into ceilings and walls, and the dome hides which way the lens is pointing, so people cannot tell which area is being watched.
Why the other options are wrong:
- A. Bullet cameras are clearly visible and show where they point, which makes them a deterrent.
- C. Modular cameras are defined by a separate main unit and sensor unit, which is about installation flexibility.
- D. Onboard cameras are built for vehicles such as buses and trains.
Question 26
What is the main purpose of the laser module in Axis PTZ cameras?
- A. Getting sharp focus
- B. Measuring object size
- C. Creating deterrence
- D. Illuminating a dark scene
Show answer and explanation ▾
Correct answer: A
Axis PTZ cameras with laser focus have a built-in laser that gives the camera an instant focus reference. The camera focuses quickly and accurately even in challenging lighting, where ordinary autofocus struggles.
Why the other options are wrong:
- B. The laser serves the focus system and is not a tool for measuring the size of objects.
- C. The laser is part of the focus system and is not a deterrence feature.
- D. The laser provides a focus reference and does not light up the scene.
Question 27
Why is germanium used for thermal camera lenses?
- A. It has a low index of refraction
- B. It is transparent to the infrared wavelengths
- C. It has high optical dispersion
- D. It is inexpensive
Show answer and explanation ▾
Correct answer: B
Ordinary glass blocks the long-wave infrared radiation that thermal cameras detect. Germanium is transparent to those wavelengths, so it is used for thermal camera lenses.
Why the other options are wrong:
- A. Germanium has a high index of refraction, not a low one.
- C. Germanium is chosen for its infrared transmission, not for optical dispersion.
- D. Germanium is an expensive material.
Question 28
In networking, what does Quality of Service (QoS) mean?
- A. Different data packets can have different priorities on the network
- B. Data packets are never dropped, which ensures network integrity
- C. The total bandwidth never falls below a defined level
- D. The data connection is automatically restored after network failures
Show answer and explanation ▾
Correct answer: A
Quality of Service lets the network treat traffic types differently, so data packets can be marked and given different priorities. Time-critical traffic such as video is forwarded ahead of less urgent data.
Why the other options are wrong:
- B. QoS prioritizes traffic and does not guarantee that packets are never dropped.
- C. QoS manages priority within the available bandwidth and does not guarantee a total bandwidth floor.
- D. Restoring a connection after a failure is a redundancy function, not QoS.
Question 29
Which method can be used to make an Axis camera available over the Internet?
- A. Axis Smart Search
- B. Subnetting
- C. Axis NAT traversal
- D. Axis Secure Remote Access
Show answer and explanation ▾
Correct answer: C
NAT traversal lets a camera on a private network behind a broadband router be reached from the Internet by automatically setting up port mapping in the NAT router.
Why the other options are wrong:
- A. Axis Smart Search is a function for searching recorded video.
- B. Subnetting divides a network into smaller networks and does not expose a camera to the Internet.
- D. Axis Secure Remote Access is a service used through Axis video management software, not the camera method that maps ports in the router.
Question 30
A video encoder effectively turns an analog camera into a network camera, by (Choose two.)
- A. improving the image by adding digital enhancements
- B. converting the analog signal to a digital format
- C. reducing the bandwidth by using smart codecs
- D. improving the WDR capabilities of the camera
- E. adding intelligent functionality found in network cameras
Show answer and explanation ▾
Correct answer: B, C
A video encoder digitizes the analog video signal and then compresses it with codecs such as H.264 or H.265, so the video travels over an IP network using far less bandwidth.
Why the other options are wrong:
- A. The encoder does not enhance the picture, whose quality is set by the analog camera.
- D. WDR performance is determined by the camera and its sensor, not by the encoder.
- E. Analytics are not what turns an analog signal into network video, which is done by digitizing and compressing it.
Question 31
Which protocol provides port-based authentication?
- A. STUN
- B. HTTPS
- C. IEEE 802.1X
- D. VPN
Show answer and explanation ▾
Correct answer: C
IEEE 802.1X is port-based network access control. A device connected to a switch port must authenticate, typically against a RADIUS server, before the port is opened for network traffic.
Why the other options are wrong:
- A. STUN helps a device discover its public address for NAT traversal.
- B. HTTPS encrypts web traffic between a client and a server.
- D. A VPN builds an encrypted tunnel between networks or hosts.
Question 32
External (non-integrated) IR illumination can help to (Choose two.)
- A. avoid blinding people passing by
- B. reduce the cabling cost
- C. increase contrast in the scene
- D. illuminate the scene more
- E. simplify installation
Show answer and explanation ▾
Correct answer: A, C
An external illuminator can be positioned and aimed independently of the camera. The installer can keep the light out of the eyes of people passing by and light the area of interest in a way that improves contrast in the scene.
Why the other options are wrong:
- B. A separate illuminator needs its own power and cabling, which adds cost.
- D. The benefit lies in where and how the light is placed, not in simply adding more light.
- E. An extra device to mount, power and align makes installation more involved.
Question 33
Keeping firmware up to date helps a device to
- A. maintain its IP-rating
- B. remain in focus constantly
- C. stay as cybersecure as possible
- D. stay compatible with the VMS
Show answer and explanation ▾
Correct answer: C
Firmware updates include patches for newly discovered vulnerabilities, so keeping firmware up to date keeps the device as cybersecure as possible.
Why the other options are wrong:
- A. The IP rating is a physical property of the housing.
- B. Focus is an optical setting and is not maintained by firmware updates.
- D. VMS compatibility depends on supported interfaces and is not the purpose of regular updates.
Question 34
What type of lens does a fixed box camera typically use?
- A. An M12 lens
- B. A CS-mount lens
- C. A C-mount lens
- D. A TA-lens
Show answer and explanation ▾
Correct answer: B
Box cameras take exchangeable C-mount or CS-mount lenses, and CS-mount is the more common of the two, so a fixed box camera typically uses a CS-mount lens.
Why the other options are wrong:
- A. An M12 lens is a small lens used in modular cameras and some dome cameras.
- C. C-mount is the older standard and is less common than CS-mount.
- D. A TA-lens is not a lens mount standard for box cameras.
Question 35
What is the maximum distance from a midspan to a camera requiring PoE+ (25.5 W)?
- A. 100 m (328 ft)
- B. 300 m (984 ft)
- C. 200 m (656 ft)
- D. 400 m (1312 ft)
Show answer and explanation ▾
Correct answer: C
One Ethernet cable run is limited to 100 m (328 ft), and a PoE extender placed in line adds another 100 m. The reach depends on the power required: a camera drawing about 25 W can be placed 200 m (656 ft) from the midspan, while only low-power cameras reach farther.
Why the other options are wrong:
- A. 100 m is the limit of one cable segment, not the maximum once a PoE extender is placed in line.
- B. 300 m is reached only by cameras that need less power than a PoE+ camera.
- D. 400 m is reached only by a low-power camera of about 5 W with three extenders in line.
Question 36
Which is true about a MAC address? (Choose two.)
- A. It is used for direct data exchange within a network
- B. It is a logical address
- C. It is a layer 3 protocol
- D. DHCP servers can assign dynamic MAC addresses
- E. It is a unique physical address
Show answer and explanation ▾
Correct answer: A, E
A MAC address is a unique physical address assigned to a network interface. Devices on the same network use it at the data link layer to deliver frames directly to each other.
Why the other options are wrong:
- B. The logical address is the IP address.
- C. A MAC address belongs to layer 2 and is an address, not a layer 3 protocol.
- D. DHCP servers assign IP addresses, not MAC addresses.
Question 37
What is the most efficient method for sending a video stream to multiple recipients simultaneously?
- A. Portcast
- B. Multicast
- C. Broadcast
- D. Unicast
Show answer and explanation ▾
Correct answer: B
With multicast the camera sends a single stream to a group address, and every recipient that joins the group receives it. Bandwidth use does not grow with each additional viewer.
Why the other options are wrong:
- A. Portcast is not a network transmission method for video streams.
- C. Broadcast delivers traffic to every host on the network, including those that did not request it.
- D. Unicast needs a separate stream for each recipient, which multiplies bandwidth use.
Question 38
Which features can an outdoor ready camera have to accommodate for changes in weather?
- A. Artic temperature control and IR-cut filter
- B. A cooling fan and a heater element
- C. A cooling fan and an IK rating
- D. A heater element and I/O ports
Show answer and explanation ▾
Correct answer: B
An outdoor-ready camera must work in both heat and cold. A cooling fan removes heat in warm weather and a heater element keeps the camera at operating temperature in cold weather.
Why the other options are wrong:
- A. An IR-cut filter handles day and night switching and has no link to weather.
- C. An IK rating describes impact resistance, not adaptation to weather.
- D. I/O ports connect external devices and do not help with weather changes.
Question 39
Firmware upgrades are efficiently installed using
- A. AXIS Device Manager
- B. AXIS IP Utility
- C. AXIS Streaming Assistant
- D. AXIS Site Designer
Show answer and explanation ▾
Correct answer: A
AXIS Device Manager handles device management tasks in bulk, including upgrading the firmware of many Axis devices in one operation.
Why the other options are wrong:
- B. AXIS IP Utility discovers devices on the network and assigns IP addresses.
- C. AXIS Streaming Assistant makes an Axis camera available as a video source for PC applications.
- D. AXIS Site Designer is a system design tool.
Question 40
Using bidirectional predictive interframe in H.264 will
- A. require more bits than if only l-frames are used
- B. be independently decoded without referencing other frames
- C. create dependency just to earlier P- and l-frames
- D. increase the latency in the system
Show answer and explanation ▾
Correct answer: D
A B-frame references both preceding and succeeding frames, so it cannot be processed until a later frame is available. Each B-frame adds a delay of about one frame interval, which increases the latency in the system.
Why the other options are wrong:
- A. B-frames reduce the number of bits compared with a stream of only I-frames.
- B. Independent decoding without reference to other frames describes an I-frame.
- C. Dependency only on earlier frames describes a P-frame, while a B-frame also references later frames.
Question 41
Continuous recording has which benefit?
- A. No incidents are missed
- B. Light sensitivity is increased
- C. WDR capabilities are enhanced
- D. The recording gets a higher resolution
Show answer and explanation ▾
Correct answer: A
Continuous recording stores video all the time and does not rely on a trigger such as motion detection, so nothing that happens in front of the camera is left unrecorded.
Why the other options are wrong:
- B. Light sensitivity depends on the sensor and lens, not on the recording mode.
- C. WDR is a camera capability and is unaffected by the recording mode.
- D. Resolution is set in the stream profile and does not rise with continuous recording.
Question 42
If an object is placed 1 m (3 ft) away from a light source and the lux level is 3200 lux, what is the lux level at a distance of 8 m (24 ft)?
- A. 400 lux
- B. 10 lux
- C. 50 lux
- D. 200 lux
Show answer and explanation ▾
Correct answer: C
The light available at a distance is inversely proportional to the square of that distance. At eight times the distance the level is 1/64 of the original, and 3200 lux divided by 64 is 50 lux.
Why the other options are wrong:
- A. 400 lux comes from dividing by 8, which treats the fall-off as linear.
- B. 10 lux is lower than the inverse square law gives for eight times the distance.
- D. 200 lux comes from dividing by 16, which corresponds to four times the distance.
Question 43
What direction of movement (relative to the camera) do video analytics applications detect more easily?
- A. Perpendicular to the camera
- B. Away from the camera
- C. Toward the camera
- D. At a 45° angle to the camera
Show answer and explanation ▾
Correct answer: A
Objects moving perpendicular to the camera's field of view are detected faster than objects approaching in a straight line, because movement across the view shifts the object's position much more from frame to frame.
Why the other options are wrong:
- B. Movement along the line of sight away from the camera changes the object's position in the view very little.
- C. An object coming straight toward the camera changes position in the view very little, which slows detection.
- D. Diagonal movement gives less sideways displacement than perpendicular movement.
Question 44
What type of lens has better iris control in all lighting conditions?
- A. A P-Iris lens
- B. A fixed lens
- C. A DC-iris lens
- D. A manual lens
Show answer and explanation ▾
Correct answer: A
With a P-Iris lens the camera controls the size of the iris opening much more precisely than with a DC-iris lens, which improves sharpness, contrast and depth of field across lighting conditions.
Why the other options are wrong:
- B. A fixed lens describes the focal length and does not provide precise iris control.
- C. A DC-iris lens opens and closes with the light level but without precise control of the opening.
- D. A manual lens has an iris set by hand that does not adapt to changing light.
Question 45
If your PoE switch is unable to supply sufficient power to the network device, which of the following should be used?
- A. A PoE extender
- B. A UPS
- C. A midspan
- D. A layer 3 switch
Show answer and explanation ▾
Correct answer: C
A midspan is placed between the switch and the network device and injects power onto the Ethernet cable. It supplies the power the device needs when the switch cannot deliver enough.
Why the other options are wrong:
- A. A PoE extender lengthens the cable distance and does not add the missing power.
- B. A UPS provides backup mains power and does not put PoE on the network cable.
- D. A layer 3 switch adds routing and does not raise the available PoE power.
Question 46
Typically, a system designer calculates the pixel density based on
- A. the total resolution and the installation height
- B. the horizontal resolution and the field of view
- C. the illuminance and the depth of field
- D. the aspect ratio and the frame rate
Show answer and explanation ▾
Correct answer: B
Pixel density is the number of horizontal pixels divided by the width of the scene covered at the target distance, so it is calculated from the horizontal resolution and the field of view.
Why the other options are wrong:
- A. Installation height affects the viewing angle but is not the basis of the calculation.
- C. Illuminance and depth of field affect exposure and sharpness, not pixel density.
- D. Aspect ratio and frame rate do not determine the pixels per meter on a target.
Question 47
Attackers may try to deceive system owners into installing altered firmware which may include malicious code. Axis helps prevent this by using
- A. a TPM module
- B. IEEE 802.1AR
- C. HTTPS downloads
- D. signed firmware
Show answer and explanation ▾
Correct answer: D
Axis signs its firmware with a private signature that the device verifies before installing. Firmware that has been altered fails the verification and is rejected, so malicious code cannot be installed this way.
Why the other options are wrong:
- A. A TPM module protects stored cryptographic secrets and does not verify firmware files.
- B. IEEE 802.1AR provides a secure device identity for network authentication.
- C. HTTPS protects the download in transit but does not prove the firmware itself is authentic.
Question 48
The main benefit of using Power over Ethernet (PoE) is that
- A. the installation is more secure
- B. the installation consumes less power
- C. the installation costs less
- D. the installation is less sensitive to interference
Show answer and explanation ▾
Correct answer: C
PoE carries power and data over the same Ethernet cable, so no separate power cable or electrical outlet is needed at each camera. That cuts cabling and labor, which lowers the cost of the installation.
Why the other options are wrong:
- A. PoE changes how power is delivered and does not make the installation more secure.
- B. PoE does not reduce the power that the devices consume.
- D. PoE runs over the same Ethernet cabling as the data and does not reduce sensitivity to interference.
Question 49
In which situation should a system designer recommend a customer to install standalone multi-channel video encoders to leverage an existing analog surveillance infrastructure?
- A. When cameras are placed in both indoor and outdoor locations
- B. When cameras are spread over a large area far from the central monitoring room
- C. When large numbers of cameras are located near the central monitoring room
- D. When cameras are located in groups far from the central monitoring room
Show answer and explanation ▾
Correct answer: B
Standalone video encoders are positioned close to the analog cameras and send the video over the IP network. They suit sites where the cameras are at a distance from the central monitoring room, where long coax runs back to it would be impractical.
Why the other options are wrong:
- A. Indoor or outdoor placement of the cameras does not decide which encoder form factor to use.
- C. Large numbers of cameras near the monitoring room are served by high-density rack-mounted encoders.
- D. Camera grouping alone is not the deciding factor for recommending standalone encoders.
Question 50
Closing the aperture at a fixed local length provides
- A. a longer field of view and a lower f-number
- B. a shorter field of view and a higher f-number
- C. a longer depth of field and a higher f-number
- D. a shorter depth of field and a higher f-number
Show answer and explanation ▾
Correct answer: C
The f-number is the focal length divided by the diameter of the aperture, so closing the aperture at a fixed focal length raises the f-number. A smaller opening also increases the depth of field, so more of the scene is in focus at the same time.
Why the other options are wrong:
- A. Closing the aperture raises the f-number and does not change the field of view.
- B. The field of view depends on focal length and sensor size, not on the aperture.
- D. Closing the aperture lengthens the depth of field, it does not shorten it.
Question 51
Accelerometers are required for which feature?
- A. Motion detection
- B. Speed detection
- C. Sound detection
- D. Shock detection
Show answer and explanation ▾
Correct answer: D
Shock detection relies on a built-in orientation sensor such as an accelerometer. The sensor registers when the camera is struck, tilted or moved, and the camera can then trigger an event.
Why the other options are wrong:
- A. Motion detection analyzes changes in the video and does not need an accelerometer.
- B. Speed detection measures objects moving in the scene, not movement of the camera itself.
- C. Sound detection uses a microphone, not an accelerometer.
Question 52
When recording a night scene with IR, what is the consequence of using a day-and-night camera without an IR-corrected lens?
- A. The IR light will not be used
- B. The color fidelity will be poor
- C. The image will flicker
- D. The focus will shift
Show answer and explanation ▾
Correct answer: D
Each wavelength of light focuses at a different point after passing through a lens, and infrared has a longer wavelength than visible light. Without an IR-corrected lens, a camera focused in daylight loses focus when it switches to IR at night.
Why the other options are wrong:
- A. The sensor still uses the IR light once the IR-cut filter is removed.
- B. Night video recorded with IR is black and white, so color fidelity is not what suffers.
- C. Flicker is caused by the light source and shutter timing, not by the lens.
Question 53
Which rating is important when vandalism is a risk?
- A. UL
- B. IP
- C. ONVIF
- D. IK
Show answer and explanation ▾
Correct answer: D
The IK rating specifies the degree of protection an enclosure gives against external mechanical impact, measured in joules. It is the rating to check when a camera may be hit or attacked.
Why the other options are wrong:
- A. UL is a product safety certification, not a measure of impact resistance.
- B. The IP rating covers protection against dust and water, not impacts.
- C. ONVIF is an interoperability standard for network video products.
Question 54
Which camera model provides the greatest deterrence effect?
- A. AXIS P3247-LVE
- B. AXIS M3116-LVE
- C. AXIS P1375-E
- D. AXIS F1035-E
Show answer and explanation ▾
Correct answer: C
AXIS P1375-E is a fixed box camera in an outdoor housing, a large and clearly visible form that plainly shows where it is pointing. A conspicuous camera deters more than a discreet dome or a miniature sensor unit.
Why the other options are wrong:
- A. AXIS P3247-LVE is a dome camera, a more discreet design that conceals where the lens points.
- B. AXIS M3116-LVE is a compact dome designed to be discreet.
- D. AXIS F1035-E is a small sensor unit made for discreet installations.
Question 55
In good conditions, a pixel density of 250 px/m (80 px/ft) is required for
- A. recognition
- B. observation
- C. detection
- D. identification
Show answer and explanation ▾
Correct answer: D
Identification needs about 40 pixels across a human face, which corresponds to 250 px/m (80 px/ft). At that density there is enough detail to establish who a person is.
Why the other options are wrong:
- A. Recognition requires 125 px/m (40 px/ft).
- B. Observation requires 63 px/m (20 px/ft).
- C. Detection requires 25 px/m (8 px/ft).
Question 56
What can an installer do to prevent reflections from built-in IR illuminators from degrading the image quality?
- A. Reduce the brightness level
- B. Adjust the camera's field of view
- C. Make the aperture smaller
- D. Turn off Zipstream in the live view
Show answer and explanation ▾
Correct answer: B
IR light from built-in LEDs bounces off nearby surfaces such as walls, ceilings or eaves and returns to the lens as glare. Adjusting the field of view so those close surfaces are outside the scene removes the reflections.
Why the other options are wrong:
- A. Lowering the brightness darkens the whole picture and does not remove the reflected IR.
- C. A smaller aperture reduces all incoming light and does not stop IR reflections.
- D. Zipstream is a compression feature and has no effect on IR reflections.
Question 57
Which are focus technologies offered by Axis cameras? (Choose two.)
- A. Laser focus
- B. Focus pinpoint
- C. Focus recall
- D. Action focus
- E. Macro focus
Show answer and explanation ▾
Correct answer: A, C
Laser focus uses a built-in laser to measure the distance to the subject, so the camera focuses quickly even in low light. Focus recall stores the focus for chosen areas of a PTZ view and restores it automatically when the camera returns to that area.
Why the other options are wrong:
- B. Focus pinpoint is not an Axis focus technology.
- D. Action focus is not an Axis focus technology.
- E. Macro focus is a close-up photography term, not an Axis focus technology.
Question 58
Which dome type might negatively affect the image quality?
- A. Glass dome
- B. Clear dome
- C. Hydrophilic clear dome
- D. Smoked dome
Show answer and explanation ▾
Correct answer: D
A smoked dome is tinted to hide the direction of the lens, and the tint reduces the amount of light that reaches the sensor. Less light means lower video quality, especially in dim scenes.
Why the other options are wrong:
- A. A glass dome is not tinted and does not cut the light reaching the sensor.
- B. A clear dome lets light through without the loss caused by tinting.
- C. A hydrophilic clear dome is a clear dome with a coating for wet conditions and is not tinted.
Question 59
The pixel density describes:
- A. the number of pixels per m (ft) horizontally.
- B. the selected compression level.
- C. the color intensity of an area.
- D. the exact size of an object.
Show answer and explanation ▾
Correct answer: A
Pixel density is the number of pixels that cover one meter or one foot of the scene, measured horizontally at the distance of the subject. It shows how much detail the camera captures at that point.
Why the other options are wrong:
- B. The compression level is a separate encoder setting and is not what pixel density describes.
- C. Color intensity is unrelated to pixel density.
- D. Pixel density describes detail per unit of width, not the exact size of an object.
That was 59 of 188.
The full Axis Communications ANVE pack has all 188 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.
Get the full packNot ready yet? Get the first 71 free as one PDF by email. Get the Half Pack →
About the ANVE exam
These 59 Axis Communications ANVE questions are free here. The free PDF has 71, free by email.
They are drawn from the same bank as the full ANVE pack, which has 188 questions in total.