ASQ CSQE Practice Questions with Explanations

Free ASQ CSQE practice questions. 65 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.

CSQE practice questions

Question 1

Which of the following describes when a test plan should be changed?

  • A. After product stability has been assessed
  • B. After changes to the design specifications
  • C. After each code review
  • D. When the configuration management tool is updated
Show answer and explanation ▾

Correct answer: B

A test plan is built from the product design, so when the design specifications change the plan must be revisited to cover the new behavior. Stability results, code reviews and tool updates do not by themselves change what has to be tested.

Why the other options are wrong:

  • A. Assessing stability reports on the product and does not change what the plan must cover.
  • C. A code review is routine and does not alter the design the plan is based on.
  • D. A tool update affects how work is done, not the scope of the test plan.

Question 2

Which of the following steps comes first during release planning for waterfall-type projects?

  • A. Define the scope of the software being developed.
  • B. Determine which problems will be corrected in the next release.
  • C. Select the set of requirements that will be included in the release.
  • D. Confirm the implemented software meets the specified requirements.
Show answer and explanation ▾

Correct answer: A

In a waterfall-type project the scope of the software is set first. Requirements for the release, problem fixes and confirmation against requirements all follow from that scope.

Why the other options are wrong:

  • B. Choosing which problems to correct depends on the scope already being defined.
  • C. Selecting the requirements for a release comes after the scope is set.
  • D. Confirming the software meets its requirements is verification, which happens near the end.

Question 3

Which of the following actions can a company take to reduce the risk associated with integrating a commercial off-the-shelf (COTS) spreadsheet package into its own software product?

  • A. Require the vendor to adhere to the licensing agreement for product fixes.
  • B. Audit the vendor's quality system.
  • C. Require the vendor to place the object code into escrow.
  • D. Test the product to determine whether it satisfies critical functions.
Show answer and explanation ▾

Correct answer: D

Testing the COTS package against the functions your product depends on shows directly whether it will work when integrated. That evidence reduces integration risk more than contract or paperwork measures do.

Why the other options are wrong:

  • A. A licensing clause about fixes gives legal recourse but does not show the package works.
  • B. Auditing the vendor looks at their process, not at how the package behaves in your product.
  • C. Escrowing object code helps only if the vendor fails, and object code is of little use for maintenance.

Question 4

Globalization requirements involve

  • A. defining the required information flow across shared interfaces to external entities
  • B. defining problems to be solved or opportunities to be addressed by the software product
  • C. looking at the capability of the software product from the perspectives of various stakeholders
  • D. developing software that can be adapted to target markets and customizing software for those markets
Show answer and explanation ▾

Correct answer: D

Globalization requirements deal with building software that can be adapted to different target markets, and with customizing it for those markets, such as language and local conventions.

Why the other options are wrong:

  • A. This describes interface requirements, which define information flow across shared interfaces.
  • B. This describes the business requirements, the problem or opportunity the product addresses.
  • C. This describes stakeholder requirements, which view the product from different stakeholders.

Question 5

Which of the following benefits is related to DevOps when it is used to facilitate development activities?

  • A. Reducing time to market
  • B. Minimizing software releases
  • C. Increasing return on investment
  • D. Standardizing organizational processes
Show answer and explanation ▾

Correct answer: A

DevOps links development and operations so changes are built, tested and released more often and more quickly. Reduced time to market is the benefit most directly tied to that.

Why the other options are wrong:

  • B. DevOps aims for frequent, smaller releases rather than fewer of them.
  • C. Return on investment may improve but it is an indirect result, not the direct benefit of DevOps practice.
  • D. Standardizing organizational processes is a goal of process improvement efforts, not specifically DevOps.

Question 6

Which of the following methods is an example of dynamic analysis?

  • A. Piloting
  • B. Peer reviews
  • C. Quality gates
  • D. Mathematical proofs
Show answer and explanation ▾

Correct answer: A

Dynamic analysis evaluates software by executing it and observing its behavior. Piloting runs the software in a limited real setting, so findings come from actual operation rather than from examining documents or code.

Why the other options are wrong:

  • B. Peer reviews examine work products without executing them, which is static analysis.
  • C. Quality gates are checkpoints that compare results with criteria, not a method that executes the software.
  • D. Mathematical proofs reason about correctness without running the software, which is static analysis.

Question 7

A cross-functional team has been established to improve the effectiveness of the inspection process. All team members have volunteered to participate and are experienced in the current process. In this situation, the team sponsor's role should be to

  • A. provide the team with specific instructions and closely supervise its performance
  • B. explain each step before the team can take action
  • C. participate in team meetings and facilitate daily decision-making
  • D. authorize the team to make decisions and implement changes
Show answer and explanation ▾

Correct answer: D

An experienced, willing team needs little direction, so the sponsor should delegate. The sponsor's role is to give the team the authority to make decisions and implement changes, and to remove obstacles.

Why the other options are wrong:

  • A. Close supervision and detailed instructions suit an inexperienced team, not experienced volunteers.
  • B. Explaining every step before action is a directing style that this capable team does not need.
  • C. Facilitating meetings and daily decisions is the work of the team leader or facilitator, not the sponsor.

Question 8

Maintenance activities are commonly characterized as

  • A. technological.
  • B. definitive.
  • C. corrective.
  • D. predictive.
Show answer and explanation ▾

Correct answer: C

Software maintenance is classified by its purpose: corrective, adaptive, perfective and preventive. Corrective maintenance fixes defects found after the software is released.

Why the other options are wrong:

  • A. Technological is not one of the standard categories of software maintenance.
  • B. Definitive is not one of the standard categories of software maintenance.
  • D. Predictive is not one of the standard categories of software maintenance, which are corrective, adaptive, perfective and preventive.

Question 9

Which of the following types of test coverage is most appropriate when the objective is to determine if the software has any problems handling all the required possible hardware and software designs?

  • A. State
  • B. Interface
  • C. Data domain
  • D. Platform configuration
Show answer and explanation ▾

Correct answer: D

Platform configuration coverage measures how many of the required combinations of hardware, operating systems and other software the product has been tested on, which reveals problems tied to specific supported environments.

Why the other options are wrong:

  • A. State coverage measures how many states and transitions of the software have been exercised.
  • B. Interface coverage measures how thoroughly the connections between components or systems have been exercised.
  • C. Data domain coverage measures how well the ranges of input and output values have been tested.

Question 10

Under which of the following product requirements would the amount of work completed by a software system over a period of time be classified?

  • A. Interface
  • B. Attribute
  • C. Functional
  • D. Performance
Show answer and explanation ▾

Correct answer: D

The amount of work a system completes in a period of time is throughput, and throughput is a performance requirement along with response time and capacity.

Why the other options are wrong:

  • A. Interface requirements describe how the system connects to users, hardware and other software.
  • B. Attribute requirements describe qualities such as usability, reliability and maintainability.
  • C. Functional requirements describe what the system must do, not how much work it completes over time.

Question 11

Which of the following charts is most appropriate for presenting a summary view of a set of metrics that include an ideal value?

  • A. Pie
  • B. Bar
  • C. Kiviat
  • D. Stoplight
Show answer and explanation ▾

Correct answer: D

A stoplight chart summarizes a set of metrics by coloring each one green, yellow or red according to how its current value compares with its ideal or target value, giving a quick status overview.

Why the other options are wrong:

  • A. A pie chart shows how a whole divides into parts, not how metrics compare with ideal values.
  • B. A bar chart compares quantities across categories and does not by itself summarize status against ideal values.
  • C. A Kiviat chart plots metrics on radial axes and is not the summary status view described here.

Question 12

Which of the following steps is taken first when managing earned value metrics?

  • A. Determining the critical resources to be tracked
  • B. Calculating the planned value, earned value, and actual value metrics
  • C. Analyzing the earned value metric compared to the other metrics to date
  • D. Allocating the resource budget to individual tasks in the work breakdown structure
Show answer and explanation ▾

Correct answer: D

Earned value tracking starts from a baseline. The budget must first be allocated to the individual tasks in the work breakdown structure, because planned value and earned value are both calculated from those task budgets.

Why the other options are wrong:

  • A. Deciding which critical resources to track is not the first step in managing earned value metrics.
  • B. Planned value, earned value and actual value cannot be calculated until the budget is allocated to tasks.
  • C. Analysis of earned value against other metrics happens after the values have been calculated.

Question 13

Which of the following review meetings are held to examine aggregated performance information?

  • A. Program
  • B. Management
  • C. Retrospectives
  • D. Post implementation
Show answer and explanation ▾

Correct answer: B

Management reviews look at summarized, aggregated information on cost, schedule, quality and risk so that managers can judge status and decide on corrective action.

Why the other options are wrong:

  • A. Program is not the review type defined for examining aggregated performance information.
  • C. Retrospectives look back at how a team worked in order to find improvements for the next iteration or project.
  • D. Post implementation reviews assess a delivered product or project after it has gone into use.

Question 14

A function point analysis uses counts of which of the following elements?

  • A. Data definitions
  • B. Physical lines
  • C. Executable lines
  • D. External inquiries
Show answer and explanation ▾

Correct answer: D

Function point analysis counts five element types: external inputs, external outputs, external inquiries, internal logical files and external interface files. The counts are weighted by complexity to size the software.

Why the other options are wrong:

  • A. Data definitions are not one of the five element types counted in function point analysis.
  • B. Physical lines are a lines of code size measure, not a function point element.
  • C. Executable lines are a lines of code size measure, not a function point element.

Question 15

Quality function deployment is defined as a

  • A. procedure in which code modules with low defect density are identified for reuse
  • B. technique for measuring complex metrics by random sampling of functional units
  • C. method that provides a framework for relating product features to customer needs
  • D. process in which best practices are distributed throughout all levels of an organization
Show answer and explanation ▾

Correct answer: C

Quality function deployment translates the voice of the customer into product characteristics. Its matrices, such as the house of quality, relate customer needs to the product features that satisfy them.

Why the other options are wrong:

  • A. Identifying low defect modules for reuse is a reuse practice, not quality function deployment.
  • B. Quality function deployment is not a sampling technique for measuring metrics.
  • D. Spreading best practices through an organization is not what quality function deployment defines.

Question 16

From the auditor's perspective, which of the following actions will result in a successful internal audit?

  • A. Reporting as many deficiencies as possible
  • B. Completing each item on the checklist
  • C. Recommending corrective action for each deficiency noted
  • D. Obtaining management cooperation and support
Show answer and explanation ▾

Correct answer: D

An audit succeeds when management of the audited area cooperates and supports it, because that gives the auditor access to people and evidence and ensures the findings are acted on.

Why the other options are wrong:

  • A. The number of deficiencies reported does not measure audit success, since the aim is an accurate picture.
  • B. Finishing a checklist does not make an audit successful if the findings are not accepted and acted on.
  • C. Recommending corrective action is the responsibility of the audited organization, not the auditor.

Question 17

Which of the following information is considered part of the software baseline?

  • A. Test logs
  • B. Test plan and test cases
  • C. User survey and their results
  • D. Software metrics and summarized data
Show answer and explanation ▾

Correct answer: B

A baseline consists of formally reviewed and approved work products that then change only through change control. Test plans and test cases are controlled work products that are baselined alongside requirements, design and code.

Why the other options are wrong:

  • A. Test logs are records of what happened during testing, not controlled work products in the baseline.
  • C. User surveys and their results are quality records, not part of the software baseline.
  • D. Metrics and summarized data are records used for analysis, not part of the software baseline.

Question 18

Which of the following items is an appropriate topic to be discussed in a daily scrum meeting?

  • A. A product backlog item from the current sprint and move it to future sprints
  • B. An impediment one of the team member was facing yesterday
  • C. The list of all product backlog items that need to be addressed in current sprint
  • D. A change in the product roadmap which impacts current future releases
Show answer and explanation ▾

Correct answer: B

The daily scrum is a short meeting where the team reviews progress toward the sprint goal, plans the next day of work and raises impediments that are blocking team members.

Why the other options are wrong:

  • A. Moving a backlog item out of the sprint is a scope decision made with the product owner, not a daily scrum topic.
  • C. Reviewing the full list of backlog items for the sprint belongs to sprint planning.
  • D. Product roadmap changes are handled by the product owner with stakeholders, outside the daily scrum.

Question 19

Corrective action procedures must include which of the following elements?

  • A. Who caused the nonconformities
  • B. What caused the nonconformities
  • C. Any history of similar nonconformities
  • D. Any trend data of similar nonconformities
Show answer and explanation ▾

Correct answer: B

Corrective action removes the cause of a detected nonconformity so that it does not recur, so the procedure must include determining what caused the nonconformity.

Why the other options are wrong:

  • A. Corrective action looks for the cause in the process, not for the person to blame.
  • C. A history of similar nonconformities can help analysis but is not a required element of the procedure.
  • D. Trend data on similar nonconformities can help analysis but is not a required element of the procedure.

Question 20

Software security is developed to address which of the following types of communication threats?

  • A. Intentional attacks
  • B. Unintentional attacks
  • C. Physical attacks
  • D. Natural disasters
Show answer and explanation ▾

Correct answer: A

Software security protects the software and its data against deliberate, malicious attempts to gain access, steal or alter information, or disrupt service.

Why the other options are wrong:

  • B. Unintentional harm such as accidents and user mistakes is mainly the concern of safety and reliability engineering.
  • C. Physical attacks are countered by physical security controls, not by software security.
  • D. Natural disasters are handled by disaster recovery and continuity planning.

Question 21

A software engineer is asked to analyze the relationship between the number of defects found and the complexity of various software applications.

Which of the following is the appropriate tool to use for this analysis?

  • A. Cause and effect diagram
  • B. Control charts
  • C. Histogram
  • D. Scatter diagram
Show answer and explanation ▾

Correct answer: D

A scatter diagram plots pairs of values for two variables, here defects found and complexity, so that any relationship or correlation between them becomes visible.

Why the other options are wrong:

  • A. A cause and effect diagram organizes possible causes of a problem and does not plot paired data.
  • B. Control charts show the variation of a process over time, not the relationship between two variables.
  • C. A histogram shows the frequency distribution of a single variable.

Question 22

When an organization uses the plan-do-check-act (PDCA) cycle to align its processes to an international quality standard, which of the following activities would be performed during the “act” step?

  • A. Identifying actions to be performed during the pilot
  • B. Performing internal audits of the system
  • C. Making quality system revisions
  • D. Documenting the problems to present to management
Show answer and explanation ▾

Correct answer: C

In the act step the organization acts on what the check step revealed, standardizing what worked and revising the quality system to correct what did not.

Why the other options are wrong:

  • A. Identifying the actions for a pilot is part of the plan step.
  • B. Internal audits evaluate the system against the plan, which is part of the check step.
  • D. Documenting problems for management reports check results and is not the act step.

Question 23

Which of the following disadvantages are associated with the "formal meeting” technique of oral communication?

  • A. Loss of non-verbal communication, no permanent record, and time consuming
  • B. Loss of non-verbal communication, one way communication, and all topics may not be relevant to all team members
  • C. Can degrade into time wasters, can be disruptive, and requires considerable planning and skills to achieve positive impression
  • D. Can degrade into time wasters, some people feel uncomfortable offering opinions in public, and difficult for remote team members
Show answer and explanation ▾

Correct answer: D

Formal meetings can turn into time wasters, some attendees are reluctant to voice opinions in front of a group, and team members at remote sites find it hard to take part.

Why the other options are wrong:

  • A. Formal meetings are face to face and are recorded in minutes, so loss of non-verbal cues and no permanent record do not apply.
  • B. Formal meetings allow two-way discussion and non-verbal communication.
  • C. Needing considerable planning and skill to make a positive impression describes formal presentations, not formal meetings.

Question 24

A project team conducts a review of its latest software design. The review process is well-defined and is used by all projects within the company.

As part of the review process, defect levels are compared against acceptable limits to determine appropriate corrective action. According to the CMMI-DEV V1.2, which of the following activities could the company perform to demonstrate characteristics unique to a Maturity Level 5 organization?

  • A. Submit defect data to a team for future defect prevention.
  • B. Collect defect data for each project's specific software process.
  • C. Record defect data and establish the process capability baseline.
  • D. Assess the validity of each defect data measurement independently.
Show answer and explanation ▾

Correct answer: A

Maturity Level 5, Optimizing, adds Causal Analysis and Resolution, in which causes of defects are identified and action is taken to prevent them in the future. Sending defect data to a defect prevention team shows that behavior.

Why the other options are wrong:

  • B. Collecting defect data for each project's process is basic measurement practice found at lower maturity levels.
  • C. Establishing process capability baselines is a quantitative management practice of Maturity Level 4.
  • D. Checking the validity of defect measurements is part of measurement and analysis at lower maturity levels.

Question 25

Which of the following activities indicates that an organization is committed to using customer feedback to drive business improvements?

  • A. Conducts annual customer surveys
  • B. Reports customer reviews to shareholders
  • C. Uses a formal "voice of the customer" program
  • D. Gathers customer feedback from social media platforms
Show answer and explanation ▾

Correct answer: C

A formal voice of the customer program systematically captures customer needs and feedback, analyzes them and feeds the results into decisions and improvement actions, which shows real commitment to acting on feedback.

Why the other options are wrong:

  • A. An annual survey only collects opinions and does not show that the results drive improvement.
  • B. Reporting reviews to shareholders shares information and does not drive business improvement.
  • D. Gathering feedback from social media is only data collection without a process to act on it.

Question 26

Which of the following inputs is used in software cost estimation models?

  • A. Lines of code
  • B. Number of users
  • C. Age of the software
  • D. Maintenance requirements
Show answer and explanation ▾

Correct answer: A

Software cost estimation models such as COCOMO take the estimated size of the software as their main input, and size is commonly expressed in lines of code.

Why the other options are wrong:

  • B. Number of users is not a standard size input to software cost estimation models.
  • C. Age of the software is not an input used by software cost estimation models.
  • D. Maintenance requirements are not the size input that cost estimation models are built on.

Question 27

Which of the following outputs is most likely to result from a sprint retrospective?

  • A. Stakeholder feedback
  • B. Refined product backlog
  • C. Product enhancement request
  • D. Continuous improvement action
Show answer and explanation ▾

Correct answer: D

In the sprint retrospective the team inspects how the sprint went in terms of people, process and tools, and agrees on improvement actions to apply in the coming sprints.

Why the other options are wrong:

  • A. Stakeholder feedback is gathered in the sprint review.
  • B. A refined product backlog comes from backlog refinement and the sprint review.
  • C. Product enhancement requests come from stakeholders and the sprint review, not the retrospective.

Question 28

Which of the following statements is true about component reuse?

  • A. The more a developer knows about the implementation, the more reusable a component will be.
  • B. Information-hiding impedes the development of reusable components.
  • C. Development costs are improved by reusable components.
  • D. Modifying a previously used module is an example of module reuse.
Show answer and explanation ▾

Correct answer: C

Reusing proven components means less new design, coding and testing, so development cost and time go down and quality benefits from components that have already been used.

Why the other options are wrong:

  • A. Reusable components are used through their interfaces, so dependence on implementation knowledge reduces reusability.
  • B. Information hiding supports reuse by separating the interface from the implementation.
  • D. Reuse means using a module as it is, so modifying a previously used module is not module reuse.

Question 29

A sprint started with 354 requirements. As the sprit progressed, 14 requirements were introduced, 6 requirements were removed, and 28 requirements were changed.

What was the requirements volatility for this sprint?

  • A. 8.8%
  • B. 11.9%
  • C. 13.5%
  • D. 15.7%
Show answer and explanation ▾

Correct answer: C

Requirements volatility is the number of requirements added, deleted and changed divided by the starting number. Here that is 14 + 6 + 28 = 48, and 48 / 354 is about 13.5 percent.

Why the other options are wrong:

  • A. 8.8% is too low because it does not count all 48 added, removed and changed requirements.
  • B. 11.9% counts only the 14 added and 28 changed requirements and leaves out the 6 removed.
  • D. 15.7% is higher than the 48 changes out of 354 requirements give.

Question 30

Which of the following activities should be classified as an internal failure cost?

  • A. Responding to customer satisfaction
  • B. Completing an internal audit
  • C. Shipping a maintenance build
  • D. Investigating the cause of build defects
Show answer and explanation ▾

Correct answer: D

Internal failure costs come from defects found before the product reaches the customer. Investigating the cause of build defects is failure analysis and rework on problems found in house.

Why the other options are wrong:

  • A. Responding to customer satisfaction issues happens after delivery and is not an internal failure cost.
  • B. An internal audit is an appraisal cost.
  • C. Shipping a maintenance build corrects problems in a released product, which is an external failure cost.

Question 31

At what point in the development lifecycle should change control be implemented?

  • A. During the requirements phase
  • B. During the implementation phase
  • C. At the beginning of the design phase
  • D. When the testing phase begins
Show answer and explanation ▾

Correct answer: A

Change control should begin as soon as the first work products are baselined, which is in the requirements phase. Controlling requirements changes from the start prevents uncontrolled scope growth and rework later.

Why the other options are wrong:

  • B. Waiting until implementation leaves requirements and design changes uncontrolled.
  • C. Starting at design leaves changes to the requirements uncontrolled.
  • D. Starting at testing leaves changes made during requirements, design and coding uncontrolled.

Question 32

Which of the following types of tests should be run on an installation of a new client server development environment that has 2 to 25 users in order to ensure it meets the company's requirements?

  • A. Maintainability tests
  • B. Boundary value tests
  • C. Efficiency tests
  • D. Performance tests
Show answer and explanation ▾

Correct answer: D

Performance tests check that a system meets its requirements for response time, throughput and capacity under the expected load, here 2 to 25 users of the client server environment.

Why the other options are wrong:

  • A. Maintainability tests assess how easily the software can be modified, not how it handles its user load.
  • B. Boundary value tests target the edges of input ranges in functional testing.
  • C. Efficiency tests look at resource use and are not the test type that confirms the environment supports its required number of users.

Question 33

A software engineer collected the following data set during testing.

12, 13, 13, 15, 18, 14, 16, 15, 12, 18, 17, 16, 16, 15, 14

The engineer then used the following class intervals to represent the data in a histogram.

11.5-13.5 13.5-15.5 15.5-17.5 17.5-19.5

Which of the following statements describes these class intervals most accurately?

  • A. They are appropriate.
  • B. They are unrelated to the data set.
  • C. They fail to describe the full range of data.
Show answer and explanation ▾

Correct answer: A

The data range from 12 to 18 and the four intervals run from 11.5 to 19.5, so every value is covered. The intervals have equal width and do not overlap, and no value falls on a boundary.

Why the other options are wrong:

  • B. The intervals span the values in the data set, so they are related to it.
  • C. The intervals run from 11.5 to 19.5, which covers the full range of 12 to 18.

Question 34

The benefits of having the data owner collect the data is that data owners

  • A. can process data as it is being created, which increases collection speed.
  • B. know which are the best statistical tools and techniques for data analysis.
  • C. have in-depth knowledge of the data; therefore, the data they collect will be bias-free.
  • D. are more likely to detect anomalies in the data as it is being collected, which helps increase accuracy.
Show answer and explanation ▾

Correct answer: D

The people who own the data know what normal values look like, so they are the most likely to notice anomalies and errors at the moment of collection, which improves accuracy.

Why the other options are wrong:

  • A. Collection speed is not the benefit of having data owners collect the data.
  • B. Owning the data does not mean knowing the best statistical tools for analysis.
  • C. In-depth knowledge of the data does not make the collected data free of bias.

Question 35

Which of the following metrics is included in earned value management?

  • A. The actual cost of scheduled work
  • B. The actual cost of outstanding work
  • C. The actual delay in project schedule
  • D. The budgeted cost of work performed
Show answer and explanation ▾

Correct answer: D

The budgeted cost of work performed is the earned value itself. Earned value management uses it with the budgeted cost of work scheduled and the actual cost of work performed.

Why the other options are wrong:

  • A. Earned value management uses the budgeted cost of work scheduled, not the actual cost of scheduled work.
  • B. The actual cost of outstanding work is not one of the earned value metrics.
  • C. The actual delay in the schedule is not one of the earned value metrics, which are expressed as cost values.

Question 36

Which of the following methodologies is most appropriate for managing test data?

  • A. Establishing separate cases for each level
  • B. Creating a central repository for data items
  • C. Using data items from the operational environment
  • D. Identifying data items that have become defective over time
Show answer and explanation ▾

Correct answer: B

A central repository keeps test data items under control in one place, so they can be versioned, reused across tests and levels, and kept consistent.

Why the other options are wrong:

  • A. Separate cases for each level is a way of organizing test cases, not of managing test data.
  • C. Using operational data items is a source of test data that carries privacy and security risks, not a management method.
  • D. Identifying data items that have become defective is a cleanup task, not a method for managing test data.

Question 37

Which of the following baselines is typically established after completion and approval of system requirements?

  • A. Product
  • B. Allocated
  • C. Functional
  • D. Development
Show answer and explanation ▾

Correct answer: C

The functional baseline is established when the system requirements are completed and approved. It describes the functions and performance the system as a whole must provide.

Why the other options are wrong:

  • A. The product baseline is established late in development, when the product is ready for release.
  • B. The allocated baseline follows later, when requirements are allocated to software and hardware items.
  • D. The development baseline covers evolving design and code work products during development.

Question 38

Which of the following organizational benefits is associated with increased satisfaction among external stakeholders?

  • A. Improved predictability of costs
  • B. Increased productivity of practitioners
  • C. Strengthened ability to survive or prosper
  • D. Reduced development and maintenance costs
Show answer and explanation ▾

Correct answer: C

Satisfied customers and other external stakeholders keep buying, recommend the organization and sustain its reputation, which strengthens its ability to survive or prosper.

Why the other options are wrong:

  • A. Improved cost predictability is an internal benefit of a controlled process, not a result of external stakeholder satisfaction.
  • B. Practitioner productivity is an internal benefit, not one tied to external stakeholder satisfaction.
  • D. Reduced development and maintenance costs are internal benefits of better quality practices.

Question 39

What type of audit is designed specifically to provide assurance that activities have been performed as documented?

  • A. Compliance
  • B. Supplier
  • C. Quality
  • D. Operations
Show answer and explanation ▾

Correct answer: A

A compliance audit checks whether activities were carried out in accordance with the documented requirements, such as procedures, plans, standards or regulations.

Why the other options are wrong:

  • B. A supplier audit is defined by who is audited, an external supplier, not by this purpose.
  • C. Quality audit is a broad term that covers several audit types and is not the specific type described.
  • D. An operations audit is not the audit type defined by checking that activities were performed as documented.

Question 40

Which of the following examples best represents an effective facilitator?

  • A. Clarifies team member key points
  • B. Directs and controls team member activities
  • C. Allows for discussion to focus on team members
  • D. Reinforces communication from active participants
Show answer and explanation ▾

Correct answer: A

A facilitator manages the process of the discussion and stays neutral on content. Restating and clarifying what members have said makes sure everyone understands each contribution.

Why the other options are wrong:

  • B. Directing and controlling the team is a leader or manager behavior, not facilitation.
  • C. An effective facilitator keeps the discussion focused on the topic and goal, not on individuals.
  • D. An effective facilitator draws out quieter members instead of reinforcing those who already dominate.

Question 41

In agile development, requirements changes are

  • A. discussed and incorporated during the daily stand up
  • B. implemented in the next sprint to enable rapid feature delivery
  • C. added to the product backlog and prioritized by the product owner
  • D. reviewed and approved by stakeholders in a configuration control board
Show answer and explanation ▾

Correct answer: C

In agile development a requirements change becomes an item in the product backlog. The product owner orders the backlog, so the change is taken into a sprint when its priority warrants.

Why the other options are wrong:

  • A. The daily stand up is for progress and impediments, not for accepting requirements changes.
  • B. A change is not automatically implemented in the next sprint, since that depends on its priority in the backlog.
  • D. A configuration control board approving changes is a traditional practice, not the agile approach.

Question 42

A software project requires data to be secure due to export control regulations. The software project needs to be running on the client's virtual machines, and the client does not want to connect to the software through their enterprise VPN.

Which of the following cloud ownership and service model combinations should the client use?

  • A. A public cloud and software as a service
  • B. A community cloud and platform as a service
  • C. A private cloud and infrastructure as a service
  • D. A virtual private cloud and software as a service
Show answer and explanation ▾

Correct answer: C

A private cloud is dedicated to one organization, which supports export controlled data. Infrastructure as a service provides virtual machines that the client controls, so the software can run on the client's own virtual machines.

Why the other options are wrong:

  • A. A public cloud is shared with other tenants, and software as a service does not run on the client's own virtual machines.
  • B. That deployment model shares infrastructure among several organizations, which does not suit export controlled data.
  • D. Software as a service is run by the provider, so it does not run on the client's own virtual machines.

Question 43

Which of the following statements is true about open source software (OSS)?

  • A. There is no risk involved when testing OSS.
  • B. Modifications to OSS do not need to be tested.
  • C. OSS can always be modified without significant repercussions.
  • D. OSS can be problematic when it comes to keeping up with changes.
Show answer and explanation ▾

Correct answer: D

Open source software is changed by outside contributors on their own schedule, so an organization that uses or modifies it has to keep tracking, merging and retesting new versions.

Why the other options are wrong:

  • A. Testing open source software carries risk like testing any other software.
  • B. Any modification to open source software needs testing, just as with other code.
  • C. Modifying open source software can have licensing, maintenance and compatibility repercussions.

Question 44

Which of the following usage metrics is most effective for capacity planning of a data warehouse?

  • A. Queries per user
  • B. Queries per timeframe
  • C. Query latency per user group
  • D. Queries per user group per timeframe
Show answer and explanation ▾

Correct answer: D

Capacity planning needs to know how much load arrives, from whom and when. Queries per user group per timeframe shows peak demand by type of user, which is what sizing decisions depend on.

Why the other options are wrong:

  • A. Queries per user gives no view of when the load occurs.
  • B. Queries per timeframe does not show which user groups generate the load.
  • C. Query latency per user group measures response time, not the volume of demand.

Question 45

A software quality engineer is managing a project to develop a new air traffic control system for a federal agency.

When conducting a stakeholder needs analysis, which of the following groups would be most important for eliciting criteria for the functional tests?

  • A. Current air traffic controllers
  • B. Investigators at the transportation safety board
  • C. Key associations that represent pilots and ground crews
  • D. Purchasing and finance representatives from the federal agency
Show answer and explanation ▾

Correct answer: A

Functional tests check what the system must do for its users. Current air traffic controllers are the direct users, so they know the tasks and scenarios the system has to support.

Why the other options are wrong:

  • B. Safety board investigators are not the direct users who define the system's functions.
  • C. Pilot and ground crew associations are affected by the system but do not operate it.
  • D. Purchasing and finance representatives address cost and contract matters, not functional behavior.

Question 46

Which of the following lifecycle models is designed to mitigate risks during development?

  • A. Incremental
  • B. Spiral
  • C. Waterfall
  • D. Rapid application development
Show answer and explanation ▾

Correct answer: B

The spiral model is risk driven. Each cycle identifies and analyzes the risks and resolves the most important ones, often through prototyping, before development continues.

Why the other options are wrong:

  • A. The incremental model delivers the product in pieces and is not built around explicit risk analysis.
  • C. The waterfall model moves through sequential phases with no built in risk analysis cycle.
  • D. Rapid application development focuses on fast delivery, not on risk analysis.

Question 47

The most compelling reason for automating test execution is the need to

  • A. run a standard test set often.
  • B. reduce test staff.
  • C. verify initial product releases.
  • D. stay current with program changes.
Show answer and explanation ▾

Correct answer: A

Automation pays off when the same tests are executed many times, as in regression testing, because the cost of building the automated set is recovered over repeated runs.

Why the other options are wrong:

  • B. Automation needs skilled staff to build and maintain it, so cutting staff is not the main reason.
  • C. Initial releases are tested with new tests that are run few times, where automation gives little return.
  • D. Frequent program changes increase the upkeep of automated tests and are not the main reason to automate.

Question 48

A strong customer feedback management process primarily helps an organization improve

  • A. profitability.
  • B. existing products.
  • C. company stock price.
  • D. software development time.
Show answer and explanation ▾

Correct answer: B

Customer feedback tells an organization what works and what does not in the products customers are already using, so its primary use is improving those existing products.

Why the other options are wrong:

  • A. Profitability may follow from better products but is not the primary improvement.
  • C. Stock price is not something a feedback management process primarily improves.
  • D. Development time is improved by process changes, not primarily by customer feedback.

Question 49

Which of the following sets of reviews is considered an example of a project phase gate review?

  • A. Management and retrospective reviews
  • B. Management and ready to ship reviews
  • C. Architectural design and retrospective reviews
  • D. Architectural design and ready to ship reviews
Show answer and explanation ▾

Correct answer: B

Phase gate reviews are decision points at which management decides whether a project may move on. Management reviews and ready to ship reviews both end in a go or no go decision of that kind.

Why the other options are wrong:

  • A. A retrospective review looks for lessons learned and does not decide whether the project proceeds.
  • C. An architectural design review is a technical review and a retrospective is a lessons learned review.
  • D. An architectural design review is a technical review of the design, not a phase gate decision.

Question 50

When a team is defining a software metrics program, which of the following steps must be taken first?

  • A. Determine what data to collect.
  • B. Collect preliminary data.
  • C. Establish the data collection goal.
  • D. Select the metrics to report.
Show answer and explanation ▾

Correct answer: C

A metrics program starts with the goal. Under the goal question metric approach the goals are set first, then the questions, and only then the metrics and the data needed.

Why the other options are wrong:

  • A. The data to collect can be chosen only after the goal and the metrics are known.
  • B. Collecting data before a goal is set produces data with no defined use.
  • D. Metrics are selected after the goal they must support has been established.

Question 51

A software developer is replacing a higher level code with a test code that establishes a function and passes test data to that function.

What type of test environment is the developer using?

  • A. Regression
  • B. Static
  • C. Driver
  • D. Stub
Show answer and explanation ▾

Correct answer: C

A driver is test code that stands in for the higher level module. It calls the function under test and passes test data to it.

Why the other options are wrong:

  • A. Regression testing reruns tests after a change and is not test code that replaces a higher level module.
  • B. Static techniques examine the software without executing it.
  • D. A stub stands in for a lower level module that the code under test calls.

Question 52

When a defect is discovered during the test phase, what is the earliest phase in the software lifecycle that could need rework to resolve the defect?

  • A. Implementation
  • B. Test
  • C. Requirements
  • D. Design
Show answer and explanation ▾

Correct answer: C

A defect found in testing may have been introduced in any earlier phase. The earliest phase is requirements, so a missing or wrong requirement can force rework from there forward.

Why the other options are wrong:

  • A. Implementation may need rework, but earlier phases can also be the origin of the defect.
  • B. Test is the phase in which the defect was found, not the earliest phase that could need rework.
  • D. Design may need rework, but the requirements phase comes earlier.

Question 53

The best way to reduce post-release defect density in future releases is to

  • A. provide online help for known defects.
  • B. categorize defects and perform analyses to uncover their causes.
  • C. evaluate defect arrival rates and analyze defect resolution costs.
  • D. maintain a responsive helpdesk function to identify recurring problems.
Show answer and explanation ▾

Correct answer: B

Classifying defects and analyzing their root causes shows where in the process they originate, so the process can be changed to prevent the same kinds of defects in future releases.

Why the other options are wrong:

  • A. Online help for known defects assists users but does not prevent defects.
  • C. Arrival rates and resolution costs describe the defects without revealing their causes.
  • D. A helpdesk handles problems after release and does not remove their causes.

Question 54

Each software development process should have a clearly defined set of inputs, activities, outputs, and

  • A. stimuli criteria.
  • B. entry/exit criteria.
  • C. go/no-go criteria.
  • D. cost estimates.
Show answer and explanation ▾

Correct answer: B

A well defined process states its inputs, activities and outputs, plus entry criteria that must be met before it starts and exit criteria that must be met before it is complete.

Why the other options are wrong:

  • A. Stimuli criteria is not a standard element of a process definition.
  • C. Go/no-go criteria belong to decision points such as release decisions, not to every process definition.
  • D. Cost estimates are part of project planning, not an element of a process definition.

Question 55

Which of the following libraries is used to archive intermediate baselines?

  • A. Static
  • B. Backup
  • C. Dynamic
  • D. Controlled
Show answer and explanation ▾

Correct answer: D

The controlled library holds baselines under formal configuration control. Intermediate baselines are placed there as development proceeds, and changes to them require approval.

Why the other options are wrong:

  • A. The static library is not the library used for intermediate baselines during development.
  • B. A backup library holds copies for recovery and is not where baselines are managed.
  • C. The dynamic library is the developers' working area for items still being created or changed.

Question 56

The executive summary of a project management report should emphasize details related to

  • A. completed tasks.
  • B. testing deliverables.
  • C. risks to the project.
  • D. stage/phase containment status.
Show answer and explanation ▾

Correct answer: C

An executive summary gives decision makers what needs their attention. Risks to the project are what may require management decisions or action, so they are emphasized.

Why the other options are wrong:

  • A. Completed tasks are routine status detail that belongs in the body of the report.
  • B. Testing deliverables are detail for the body of the report.
  • D. Containment status is a detailed metric for the body of the report.

Question 57

One of the requirements in a software quality plan is to measure the average time software performs without a problem in a production environment during regular business hours under usual workload. This is an example of which of the following quality attributes?

  • A. Timeliness
  • B. Availability
  • C. Performance
  • D. Reliability
Show answer and explanation ▾

Correct answer: D

Reliability is the ability of software to perform its required functions without failure under stated conditions for a stated time. The average time of operation without a problem is a reliability measure.

Why the other options are wrong:

  • A. Timeliness concerns delivering results or products on time, not time between problems.
  • B. Availability is the proportion of time the software is ready for use, not the average time it runs without a problem.
  • C. Performance concerns response time, throughput and capacity.

Question 58

What type of technology is designed to provide organizational partners with real-time access to information on a business-to-business architecture?

  • A. Embedded system
  • B. Encrypted email
  • C. Extranet
  • D. Internet
Show answer and explanation ▾

Correct answer: C

An extranet is a private network that extends part of an organization's internal systems to authorized partners, suppliers and customers, giving them controlled real-time access to business information.

Why the other options are wrong:

  • A. An embedded system is software built into a hardware device to control it.
  • B. Encrypted email protects messages and does not give real-time access to business information.
  • D. The Internet is the open public network, not a controlled partner access technology.

Question 59

Virtualization is a technology that

  • A. allows many logical computers to run on the same physical hardware.
  • B. is used when an application that runs in the cloud is offered as a service.
  • C. brings security to the cloud by establishing the right privilege levels for users.
  • D. enables organizations to bridge the gap between identity access management and cloud services.
Show answer and explanation ▾

Correct answer: A

Virtualization uses a hypervisor to divide the resources of one physical machine among several virtual machines, each of which behaves as a separate logical computer.

Why the other options are wrong:

  • B. An application offered from the cloud as a service describes software as a service.
  • C. Setting privilege levels for users is access control, not virtualization.
  • D. Linking identity and access management to cloud services is not what virtualization does.

Question 60

As a side job, a trio of software quality engineers developed a database management system for XYZ, a non-competing company, and subsequently packaged it for commercial sale as DBM Solutions. The engineers’ supervisor read about the new system in a trade magazine and asked the engineers for their opinion on whether to buy DBM Solutions. Wat would be the most appropriate way for the engineers to respond to this situation?

  • A. Explain their role in developing the software and ask to be excused from participating in the purchase decision.
  • B. Advise XYZ about their company’s interest in the software and ask XYZ to make a presentation of the software.
  • C. Advise their supervisor to buy the software, based on the fact that the product will meet the company’s requirements.
  • D. Offer to examine the software, evaluate it with respect to the company's requirements, and report on the findings.
Show answer and explanation ▾

Correct answer: A

The engineers have a personal financial interest in the product, which is a conflict of interest. The ethical response is to disclose their role and step aside from the purchase decision.

Why the other options are wrong:

  • B. Arranging a presentation without disclosing their role hides the conflict of interest.
  • C. Recommending their own product without disclosure is a conflict of interest.
  • D. Evaluating their own product for the company is not impartial and hides the conflict of interest.

Question 61

In which of the following ways do metadata requirements guarantee everyone is interpreting data consistently?

  • A. It ensures that everyone who has access to the data has a consistent understanding of its meaning and use.
  • B. It ensures that data is managed, maintained, and used appropriately through its lifecycle by creating traceability.
  • C. It ensures that the data structure remains consistent by making certain that data are correctly classified and stored.
  • D. It ensures that quality standards are met by helping organizations better assess potential risks related to data security.
Show answer and explanation ▾

Correct answer: A

Metadata is data about data. It records definitions, formats, units and permitted uses, so everyone who works with the data shares the same understanding of what it means.

Why the other options are wrong:

  • B. Lifecycle management and traceability concern how data is handled, not how it is interpreted.
  • C. Keeping the data structure consistent concerns classification and storage, not interpretation.
  • D. Assessing data security risks does not address consistent interpretation of data.

Question 62

One advantage of outsourcing is that it allows the primary company to

  • A. focus resources on its core competencies.
  • B. redirect its resources on new product development.
  • C. reduce the cost of ongoing training.
  • D. eliminate the need for a skills-based workforce.
Show answer and explanation ▾

Correct answer: A

Outsourcing hands work that is outside the company's main strengths to a supplier that specializes in it. That frees the primary company's people, money and management attention for the activities it does best, which is the classic advantage of outsourcing.

Why the other options are wrong:

  • B. New product development is only one possible use of freed resources, not the general advantage outsourcing provides.
  • C. Lower training cost is not a dependable result, since staff still need training to manage and monitor the supplier.
  • D. A skilled workforce is still needed to specify, oversee and accept the outsourced work.

Question 63

Static analysis tools are used to evaluate

  • A. requirements and design.
  • B. software builds and test cases.
  • C. test procedures and packaging.
  • D. documentation and source code.
Show answer and explanation ▾

Correct answer: D

Static analysis examines a work product without executing it. Tools of this type read source code, and written documentation as well, to check for standards violations, complexity, inconsistencies and likely faults before any test is run.

Why the other options are wrong:

  • A. Requirements and design are evaluated mainly through reviews and inspections by people, not by static analysis tools.
  • B. Software builds and test cases are exercised by running them, which is dynamic rather than static evaluation.
  • C. Test procedures and packaging are checked through reviews and audits, not by static analysis tools.

Question 64

Which of the following can be used to assess the impact of a proposed software change?

  • A. Traceability matrix
  • B. Regression testing
  • C. Baseline audit
  • D. Defect rate
Show answer and explanation ▾

Correct answer: A

A traceability matrix links each requirement to the design elements, code and tests that implement and verify it. Following those links from the item being changed shows everything else that would be affected, so the impact can be assessed before the change is approved.

Why the other options are wrong:

  • B. Regression testing checks for unintended effects after a change has been made, not the impact of a change that is only proposed.
  • C. A baseline audit verifies that a baseline is complete and correct, it does not show what a proposed change would affect.
  • D. Defect rate measures how many defects are found, it does not show which items a proposed change touches.

Question 65

Which of the following types of tools can be used to detect defects?

  • A. Pareto charts
  • B. Output capture utilities
  • C. File format converters
  • D. Defect control charts
Show answer and explanation ▾

Correct answer: D

Defect control charts plot defect counts or rates over time against statistical control limits. Points or patterns outside those limits signal that something abnormal is happening, which directs the team to where defects are arising.

Why the other options are wrong:

  • A. Pareto charts rank defect categories that have already been found so the most frequent ones can be prioritized.
  • B. Output capture utilities record what a program produces for later use, they do not identify defects themselves.
  • C. File format converters change data from one format to another and have no defect detection role.

That was 65 of 175.

The full ASQ CSQE pack has all 175 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. $39.00 USD, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack

Not ready yet? Get the first 67 free as one PDF by email. Get the Half Pack →

About the CSQE exam

These 65 ASQ CSQE questions are free here. The free PDF has 67, free by email.

They are drawn from the same bank as the full CSQE pack, which has 175 questions in total.

Back to blog