API 580 Practice Questions with Explanations
Free API 580 practice questions. 44 of them, each with the correct answer, a full explanation, and the reason every other option is wrong.
API 580 practice questions
Question 1
RBI may include methodologies to assess the effectiveness of the management systems in maintaining
- A. Mechanical integrity
- B. Total asset integrity
- C. Plant integrity
Show answer and explanation ▾
Correct answer: A
RBI concentrates on the pressure boundary of equipment, and it may include ways to assess how well the management systems maintain mechanical integrity.
Why the other options are wrong:
- B. Total asset integrity is broader than what RBI management system assessments address.
- C. RBI deals with the mechanical integrity of pressure equipment, not with the integrity of the plant as a whole.
Question 2
Reliability efforts, such as reliability centered maintenance (REM), can be linked with RBI, resulting in an integrated program to
- A. Reduce downtime in an operating unit
- B. Reduce operating time of a unit
- C. To reduce risk by mitigation activities
Show answer and explanation ▾
Correct answer: A
Linking reliability efforts with RBI gives one integrated program whose aim is to reduce downtime in an operating unit.
Why the other options are wrong:
- B. Reducing the operating time of a unit is the opposite of what an integrated reliability program aims for.
- C. Risk mitigation is part of RBI itself and is not the stated result of linking reliability efforts with RBI.
Question 3
Loss of containment is
- A. Loss of fluid to the external environment
- B. Container loss at the port authority
- C. Risk related to containers
- D. B&C
Show answer and explanation ▾
Correct answer: A
In RBI, loss of containment means the process fluid escapes from the equipment to the outside, such as a leak or a rupture.
Why the other options are wrong:
- B. Shipping containers lost at a port have nothing to do with process equipment.
- C. The term is about escaped fluid, not about containers as a type of risk.
- D. Neither B nor C is correct, so the combination is wrong too.
Question 4
______________ to be established to judge acceptability of risk could he an objective of the RBI assessment if such criteria do not exist already within the user's company.
- A. Risk criteria
- B. Risk plan
- C. Risk analysis
Show answer and explanation ▾
Correct answer: A
Risk criteria are the terms of reference used to judge whether a risk is acceptable. If the company has none, establishing them can be an objective of the RBI assessment.
Why the other options are wrong:
- B. A risk plan sets out actions and is not what is used to judge the acceptability of risk.
- C. Risk analysis estimates the risk and does not set the limits for judging whether it is acceptable.
Question 5
___________ is usually not the primary objective of a RBI assessment, but it is frequently a side effect of optimization.
- A. Reducing inspection costs
- B. Increasing inspection costs
- C. Increasing frequency of inspection programs
Show answer and explanation ▾
Correct answer: A
The main aim of RBI is to understand and manage risk. Lower inspection costs often follow once the inspection program is optimized, but they are a side effect and not the primary objective.
Why the other options are wrong:
- B. Increasing inspection costs is not a usual side effect of optimizing an inspection program.
- C. More frequent inspection is not the general side effect of optimization, which targets inspection where risk is highest.
Question 6
When the inspection program is optimized based on an understanding of risk, one or more of the following cost reduction benefits may be realized. Except one
- A. Ineffective, unnecessary or inappropriate inspection activities may be eliminated
- B. Effective, necessary or appropriate inspection activities may be eliminated
- C. On-line or non-invasive inspection methods may be substituted for invasive methods that require equipment shutdown
- D. More effective infrequent inspections may be substituted for less effective frequent inspections
Show answer and explanation ▾
Correct answer: B
Optimizing inspection on the basis of risk removes work that adds no value. Inspection activities that are effective, necessary and appropriate are kept, so eliminating them is not one of the benefits.
Why the other options are wrong:
- A. Eliminating ineffective, unnecessary or inappropriate inspection activities is a listed cost reduction benefit.
- C. Substituting on-line or non-invasive methods for invasive ones that need a shutdown is a listed benefit.
- D. Replacing less effective frequent inspections with more effective infrequent ones is a listed benefit.
Question 7
The following are the risks identified by RBI assessment that may be managed by actions other than inspection. Except one
- A. Modification of the process to eliminate conditions driving the risk
- B. Modification of operating procedures to avoid situations driving the risk
- C. Chemical treatment of the process to reduce deterioration rates/susceptibilities
- D. Identifying and detecting deterioration and predicting future deterioration states with advanced inspection technique(s)
Show answer and explanation ▾
Correct answer: D
Identifying, detecting and predicting deterioration with inspection techniques is inspection itself. The question asks for actions other than inspection, such as changes to the process, procedures or chemical treatment.
Why the other options are wrong:
- A. Modifying the process to remove the conditions driving the risk is a way to manage risk without inspection.
- B. Changing operating procedures to avoid the situations driving the risk is a way to manage risk without inspection.
- C. Chemical treatment that lowers deterioration rates or susceptibility is a way to manage risk without inspection.
Question 8
For qualitative RBI analysis it is important to establish a set of rules to assure consistency in
- A. Categorization or classification
- B. Segregation
- C. Ranking
Show answer and explanation ▾
Correct answer: A
Qualitative analysis places inputs and results into broad categories, so a set of rules is needed to make sure different people categorize or classify in the same way.
Why the other options are wrong:
- B. Segregation is not the activity that the consistency rules are set up for.
- C. Ranking follows from the categories and is not what the rules are written to keep consistent.
Question 9
Generally, a qualitative analysis using broad ranges requires a __________________ from the user than a quantitative approach.
- A. Higher level of judgment, skill and understanding
- B. Lower level of judgment, skill and understanding
Show answer and explanation ▾
Correct answer: A
A qualitative analysis works with broad ranges instead of calculated values, so its quality rests on the user. It calls for a higher level of judgment, skill and understanding than a quantitative approach.
Why the other options are wrong:
- B. Broad ranges put more weight on the judgment of the user, not less.
Question 10
Potential source of errors in RBI analysis regarding data quality are the following except
- A. Assumptions in equipment history
- B. Outdated drawings and documentation
- C. Inspector error
- D. Advanced inspection methods
Show answer and explanation ▾
Correct answer: D
Typical data quality problems are assumptions in equipment history, outdated drawings and documentation, inspector error, clerical error and measurement accuracy. Advanced inspection methods are not a source of error.
Why the other options are wrong:
- A. Assumptions in equipment history are a recognized source of error in RBI data.
- B. Outdated drawings and documentation are a recognized source of error in RBI data.
- C. Inspector error is a recognized source of error in RBI data.
Question 11
The following assumption can be made that significantly impact the calculated corrosion rate early in the equipment life
- A. If the base line thickness were not performed the nominal thickness may be used for the original thickness
- B. If original thickness not available, averaged at thickness readings may be used
- C. If the original thickness not available, maximum at thickness readings may be used
Show answer and explanation ▾
Correct answer: A
With no baseline reading, the nominal thickness may be taken as the original thickness. Because the real starting thickness can differ from nominal, this assumption can hide a high corrosion rate or inflate a low one early in the equipment life.
Why the other options are wrong:
- B. Averaged thickness readings are not the assumption described for a missing original thickness.
- C. Maximum thickness readings are not the assumption described for a missing original thickness.
Question 12
________________ may result in the calculated corrosion rate appearing artificially high or low.
- A. Clerical error
- B. Measurement error
- C. Inspector error
- D. At scanning
Show answer and explanation ▾
Correct answer: B
A corrosion rate is calculated from the difference between thickness readings. When the real metal loss is small, measurement error can be a large share of that difference, so the calculated rate may appear artificially high or low.
Why the other options are wrong:
- A. Clerical error is a data quality problem but is not the cause named for an artificially high or low calculated rate.
- C. Inspector error is a data quality problem but is not the cause named for this effect.
- D. Scanning is an inspection technique, not a source of an artificially high or low rate.
Question 13
The data validation step stresses the need for a knowledgeable individual.
- A. To comparing data from the inspections to the expected deterioration mechanism and rates
- B. To compare the results with previous measurements on that system
- C. Similar systems at the site or within the company or published data
- D. All of the above
Show answer and explanation ▾
Correct answer: D
Validation needs a knowledgeable person who compares inspection data with the expected deterioration mechanisms and rates, with earlier measurements on the same system, and with similar systems at the site, in the company or in published data.
Why the other options are wrong:
- A. Comparing inspection data with expected mechanisms and rates is only one of the comparisons made.
- B. Comparing with previous measurements on the system is only one of the comparisons made.
- C. Comparing with similar systems or published data is only one of the comparisons made.
Question 14
The amount and type of codes and standards used by a facility can have
- A. Significant impact on RBI results
- B. No impact on RBI results
- C. Less significant impact on RBI results
Show answer and explanation ▾
Correct answer: A
Codes and standards set design, inspection and repair requirements, so the amount and type a facility uses can have a significant impact on RBI results.
Why the other options are wrong:
- B. The codes and standards in use do affect RBI results.
- C. Their effect on RBI results is significant, not minor.
Question 15
_________ are the primary inputs into the probability of failure evaluation.
- A. The deterioration mechanisms, rates and susceptibilities
- B. Loss of containment f fluid
- C. Fluid toxicity and its concentration
- D. Damage mechanisms and its severity
Show answer and explanation ▾
Correct answer: A
The probability of failure evaluation is built on which deterioration mechanisms are present, how fast they progress and how susceptible the equipment is. These are its primary inputs.
Why the other options are wrong:
- B. Loss of containment of fluid is the event being assessed, not an input to its probability.
- C. Fluid toxicity and concentration are inputs to the consequence evaluation.
- D. Severity of damage alone leaves out the rates and susceptibilities that drive the probability evaluation.
Question 16
Is key to performing deterioration mechanism identification
- A. Understanding equipment operation and the interaction with the chemical and mechanical environment
- B. Understanding equipment operation and process upsets
- C. Understanding equipment operation and its safety protective measures
Show answer and explanation ▾
Correct answer: A
Deterioration comes from how the equipment interacts with its surroundings, so identifying mechanisms depends on understanding equipment operation and its interaction with the chemical and mechanical environment.
Why the other options are wrong:
- B. Process upsets are only one part of the environment that must be understood.
- C. Safety protective measures affect consequences and do not identify deterioration mechanisms.
Question 17
Who can provide useful input (such as the spectrum of process conditions, injection points etc.) To aid materials specialists in the identification of deterioration mechanisms and rates
- A. Process specialists
- B. Plant operation specialists
- C. Asset integrity experts
- D. Inspection engineers
Show answer and explanation ▾
Correct answer: A
Process specialists know the full spectrum of process conditions, injection points and similar details, and they pass this to materials specialists to help identify deterioration mechanisms and rates.
Why the other options are wrong:
- B. Plant operation specialists are not the role named for supplying the spectrum of process conditions and injection points.
- C. Asset integrity experts are not the role named for supplying this process input.
- D. Inspection engineers supply inspection data and history, not the process condition input described.
Question 18
Consequence analysis will aid in preparation of
- A. Risk ranking of equipment
- B. To understand the probability of failures
- C. To understand about equipment history
Show answer and explanation ▾
Correct answer: A
Consequence analysis discriminates between equipment items by how significant a failure would be. Combined with probability, it supports a relative risk ranking of equipment.
Why the other options are wrong:
- B. Probability of failure is assessed in a separate analysis.
- C. Equipment history comes from data collection, not from consequence analysis.
Question 19
____________ are often necessary to establish susceptibility of equipment to stress corrosion cracking.
- A. Literature, expert opinion and experience
- B. Cracking mechanisms
- C. Damage mechanisms
- D. Fluid toxicity and its constituents
Show answer and explanation ▾
Correct answer: A
Susceptibility to stress corrosion cracking usually cannot be read from a measured rate. Literature, expert opinion and experience are often needed to establish it.
Why the other options are wrong:
- B. Cracking mechanisms are what is being assessed, not the means of establishing susceptibility.
- C. Damage mechanisms are what is being assessed, not the means of establishing susceptibility.
- D. Fluid toxicity and its constituents relate to consequences, not to cracking susceptibility.
Question 20
_________________curves are referred for the deterioration mechanism for carbon and low ally steel materials.
- A. Nelson curves
- B. PH concentration curves
- C. Schmidt curves for sulfide corrosion
Show answer and explanation ▾
Correct answer: A
Nelson curves chart the temperature and hydrogen partial pressure limits within which carbon and low alloy steels resist high temperature hydrogen attack, so they are the reference for this deterioration mechanism.
Why the other options are wrong:
- B. pH and concentration curves describe a corrosive solution, not the hydrogen service limits of carbon and low alloy steels.
- C. Sulfide corrosion curves deal with sulfur attack, not with the hydrogen damage of carbon and low alloy steels that Nelson curves chart.
Question 21
Following are the critical variables for deterioration mechanism except
- A. Material of construction
- B. Process operating
- C. Start up and shut down conditions
- D. Insulation
Show answer and explanation ▾
Correct answer: D
The critical variables for deterioration mechanisms are the material of construction, the process operating conditions and the start up and shut down conditions. Insulation is not on that list.
Why the other options are wrong:
- A. Material of construction is a critical variable for deterioration mechanisms.
- B. Process operating conditions are a critical variable for deterioration mechanisms.
- C. Start up and shut down conditions are a critical variable for deterioration mechanisms.
Question 22
Following are the common mechanical deterioration mechanisms except
- A. Fatigue
- B. Stress/creep rupture
- C. Tensile overload
- D. Intergranular corrosion
Show answer and explanation ▾
Correct answer: D
Fatigue, stress or creep rupture and tensile overload are mechanical deterioration mechanisms. Intergranular corrosion is a corrosion mechanism that attacks grain boundaries, so it does not belong with them.
Why the other options are wrong:
- A. Fatigue is a common mechanical deterioration mechanism.
- B. Stress or creep rupture is a common mechanical deterioration mechanism.
- C. Tensile overload is a common mechanical deterioration mechanism.
Question 23
Depending on the methodology employed in qualitative analysis, the categories may be described with words such as
- A. High, medium or low or may have numerical descriptors.
- B. High, medium or low only
- C. Numerical descriptors only
Show answer and explanation ▾
Correct answer: A
Qualitative categories depend on the methodology in use. They may be described with words such as high, medium or low, or they may carry numerical descriptors.
Why the other options are wrong:
- B. Words are not the only way categories are described, since numerical descriptors may also be used.
- C. Numerical descriptors are not the only way categories are described, since words may also be used.
Question 24
When in accurate or insufficient failure data exists on the specific equipment item for quantitate probability of failure analysis then
- A. General industry, company or manufacturer failure data used
- B. Process hazard analysis failure data may be used
- C. Process and toxic concentration analysis may be used
Show answer and explanation ▾
Correct answer: A
When failure data for the specific equipment item is inaccurate or insufficient, general industry, company or manufacturer failure data is used for the quantitative probability of failure analysis.
Why the other options are wrong:
- B. Process hazard analysis does not supply the failure data used for this purpose.
- C. Process and toxic concentration analysis relates to consequences, not to failure data.
Question 25
Deterioration rates can be expressed in terms of
- A. Corrosion rates for thinning or susceptibility for mechanisms where deterioration rate is unknown
- B. Corrosion rates for thinning only
- C. Immeasurable quantity
- D. Discrete numbers
- E. Susceptible rates only
Show answer and explanation ▾
Correct answer: A
Deterioration rates are expressed as corrosion rates for thinning. For mechanisms where the rate is unknown or cannot be measured, such as stress corrosion cracking, susceptibility is used instead.
Why the other options are wrong:
- B. Corrosion rates for thinning cover only part of the answer, since susceptibility is used for other mechanisms.
- C. An immeasurable quantity is not a way of expressing a deterioration rate.
- D. Discrete numbers are not how deterioration rates are described.
- E. Susceptibility alone leaves out the corrosion rates used for thinning.
Question 26
Damage mechanisms where deterioration rates are immeasurable or unknown are
- A. Stress corrosion cracking
- B. Hydrogen induced cracking
- C. Thinning
- D. All of the above
- E. Both A and B
Show answer and explanation ▾
Correct answer: E
Stress corrosion cracking and hydrogen induced cracking are cracking mechanisms whose rate of damage is difficult to measure or predict, so both fit, unlike thinning, which can be tracked with thickness readings.
Why the other options are wrong:
- A. Names only one of the two cracking mechanisms, while the question calls for the choice that names both.
- B. Names only one of the two cracking mechanisms, while the question calls for the choice that names both.
- C. Thinning rates can normally be measured by repeated thickness readings, so it is not an unknown-rate mechanism.
- D. Includes thinning, whose rate is measurable, so the list is not true as a whole.
Question 27
The type of failure mode that likely to occur due to pitting
- A. Small hole sized leaks
- B. Small holes to ruptures
- C. Cracks
- D. Catastrophic rupture
Show answer and explanation ▾
Correct answer: A
Pitting is highly localized metal loss, so it generally leads to small hole sized leaks.
Why the other options are wrong:
- B. Small holes to ruptures is the range associated with metallurgical and mechanical deterioration.
- C. Cracks are the failure mode of cracking mechanisms, not pitting.
- D. Catastrophic rupture is not the likely failure mode of pitting.
Question 28
The type of failure mode that likely to occur due to SSC
- A. Small holes to rupture
- B. Small holes
- C. Cracks
- D. Only rupture
Show answer and explanation ▾
Correct answer: C
Sulfide stress cracking is a cracking mechanism, so the failure mode it is likely to produce is cracks.
Why the other options are wrong:
- A. Small holes to rupture is the range associated with metallurgical and mechanical deterioration.
- B. Small holes are the typical result of pitting.
- D. Rupture alone is not the failure mode expected from a cracking mechanism.
Question 29
The type of failure mode that likely to occur due to mechanical and metallurgical deterioration
- A. Small holes to ruptures
- B. Cracks
- C. Catastrophic ruptures
- D. Leaks
Show answer and explanation ▾
Correct answer: A
Metallurgical deterioration and mechanical damage can lead to failure modes that vary widely, from small holes to ruptures.
Why the other options are wrong:
- B. Cracks alone do not cover the range of failure modes from these mechanisms.
- C. Catastrophic rupture alone does not cover the range of failure modes from these mechanisms.
- D. Leaks alone do not cover the range, which extends to ruptures.
Question 30
The type of failure mode that likely to occur due thinning
- A. Larger leaks or rupture
- B. Only rupture
- C. Metal loss
- D. Cracks
Show answer and explanation ▾
Correct answer: A
General thinning weakens a wide area of the wall, so it often leads to larger leaks or rupture.
Why the other options are wrong:
- B. Rupture is not the only outcome of thinning, since larger leaks also occur.
- C. Metal loss describes the deterioration itself, not the failure mode.
- D. Cracks are the failure mode of cracking mechanisms, not thinning.
Question 31
If a very aggressive acid is carried over from a corrosion resistant part of a system into a downstream vessel that is made of carbon steel, the result would be
- A. Rapid corrosion could result in failure in a few hours or days.
- B. General corrosion over a period of time could result in metal loss
- C. No deterioration will take place since carbon steel is resistant to aggressive acid
Show answer and explanation ▾
Correct answer: A
Carbon steel has little resistance to a very aggressive acid. If such an acid carries over from a corrosion resistant section into a carbon steel vessel, corrosion can be rapid enough to cause failure within hours or days.
Why the other options are wrong:
- B. Slow general corrosion over time understates how fast an aggressive acid attacks carbon steel.
- C. Carbon steel is not resistant to a very aggressive acid.
Question 32
If multiple inspections have been performed, which inspection may best reflect current operating conditions?
- A. Most recent inspection
- B. Base line inspection survey
- C. Process conditions
- D. Corrosion survey
Show answer and explanation ▾
Correct answer: A
Operating conditions can change over the life of the equipment, so when several inspections exist, the most recent one may best reflect current operating conditions.
Why the other options are wrong:
- B. A baseline survey reflects the condition at the start of service, not current operation.
- C. Process conditions are not an inspection.
- D. A corrosion survey is not the inspection named as best reflecting current operating conditions.
Question 33
Probability side of the risk equation is normally managed by
- A. Plant inspectors or inspection engineers
- B. Maintenance planning engineers
- C. Process safety personnel
- D. A&B
Show answer and explanation ▾
Correct answer: A
Plant inspectors or inspection engineers normally manage the probability side of the risk equation, because inspection and maintenance planning are the main ways to understand and control the likelihood of failure.
Why the other options are wrong:
- B. Maintenance planning engineers are not the group that normally manages the probability side of the risk equation.
- C. Process safety personnel are concerned with the consequence side of the risk equation.
- D. Maintenance planning engineers are not part of the answer, so this combination is wrong.
Question 34
Other functional failures are usually covered within
- A. RBI
- B. RCM
- C. PHA
- D. HAZOP
Show answer and explanation ▾
Correct answer: B
RBI focuses on loss of containment from pressurized equipment. Other functional failures are usually covered within reliability centered maintenance.
Why the other options are wrong:
- A. RBI concentrates on loss of containment, not on other functional failures.
- C. A process hazard analysis identifies hazard scenarios and is not where other functional failures are usually covered.
- D. A HAZOP is a hazard study and is not where other functional failures are usually covered.
Question 35
Qualitative consequence analysis of failure can be estimated separately for each unit, system, equipment group or individual equipment item.
- A. On the basis of expert knowledge and experience
- B. On the basis of available data
- C. On the basis of process and environmental conditions
- D. No basis required since it is qualitative
Show answer and explanation ▾
Correct answer: A
A qualitative consequence analysis does not calculate release outcomes. The consequence for each unit, system, equipment group or item is estimated on the basis of expert knowledge and experience.
Why the other options are wrong:
- B. Available data alone is not the basis of a qualitative estimate.
- C. Process and environmental conditions are inputs, not the basis on which the qualitative estimate is made.
- D. A qualitative analysis still needs a basis.
Question 36
Results of quantitative consequence analysis are usually expressed in
- A. Numeric
- B. Ranges from high to low
- C. Frequency
- D. Occasion
Show answer and explanation ▾
Correct answer: A
A quantitative consequence analysis uses models to calculate the outcome of a release, so its results are usually expressed as numbers.
Why the other options are wrong:
- B. Ranges from high to low are how qualitative results are expressed.
- C. Frequency belongs to the probability side of risk, not to consequence results.
- D. Occasion is not a way of expressing consequence results.
Question 37
In most consequence evaluations, a key element in deter-mining the magnitude of the consequence is
- A. The volume of fluid released
- B. Amount of surface area exposed due to toxic release
- C. Physical area impacted by release
Show answer and explanation ▾
Correct answer: A
The size of a consequence depends first on how much fluid escapes, so the volume of fluid released is a central element in most consequence evaluations.
Why the other options are wrong:
- B. Surface area exposed to a toxic release is a result of the release, not the element that sets its magnitude.
- C. The physical area impacted follows from the volume released.
Question 38
Following is the unit of measure of consequence that is least developed among those currently used for RBI assessment.
- A. Affected area
- B. Cost
- C. Environmental damage
- D. Safety
Show answer and explanation ▾
Correct answer: C
Environmental consequence measures are the least developed of those currently used in RBI, because environmental damage is hard to express in a single common unit.
Why the other options are wrong:
- A. Affected area is a well established consequence measure.
- B. Cost is a commonly used and well established consequence measure.
- D. Safety is a well established consequence measure.
Question 39
Most of the damage from thermal effects tends to occur in
- A. Close range
- B. Wide range
- C. Large distance
- D. None of the above
Show answer and explanation ▾
Correct answer: A
Heat from a fire falls off quickly with distance, so most thermal damage tends to occur at close range.
Why the other options are wrong:
- B. Thermal damage is concentrated near the fire, not spread over a wide range.
- C. Thermal effects weaken with distance and do little damage far away.
- D. One of the listed choices is correct.
Question 40
Toxic releases in RBI are only addressed when they affect
- A. Personnel
- B. Equipment
- C. Process
Show answer and explanation ▾
Correct answer: A
In RBI, toxic releases are addressed only when they affect personnel, meaning site workers and the public.
Why the other options are wrong:
- B. Toxic effects on equipment are not what RBI addresses for toxic releases.
- C. Toxic effects on the process are not what RBI addresses for toxic releases.
Question 41
The RBI program for environmental consequences, typically focuses
- A. On acute and immediate environmental risks, rather than chronic risks from low-level emissions
- B. On acute and immediate chronic risks than immediate environmental risks
- C. Non threat environmental risks
Show answer and explanation ▾
Correct answer: A
For environmental consequences, an RBI program typically looks at acute and immediate environmental risks from a loss of containment, not at chronic risks from low level emissions.
Why the other options are wrong:
- B. Chronic risks are not the focus of the environmental consequence assessment in RBI.
- C. Risks that pose no threat are not what the assessment focuses on.
Question 42
The consequences of environmental damage are best understood by
- A. Cost
- B. Release
- C. Volume of fluid
- D. Toxic concentration
Show answer and explanation ▾
Correct answer: A
Environmental damage is hard to measure directly, so its consequences are best understood in terms of cost, such as cleanup costs and fines.
Why the other options are wrong:
- B. The release is the event, not the measure by which environmental consequences are understood.
- C. Volume of fluid is an input to the evaluation, not the measure of environmental consequence.
- D. Toxic concentration relates to effects on people, not to the measure of environmental damage.
Question 43
Maintenance impact will generally be measured in monetary term and typically includes:
- A. Repairs and equipment replacement
- B. Method of cleanup
- C. Safety systems
Show answer and explanation ▾
Correct answer: A
Maintenance impact is generally measured in monetary terms and typically covers the cost of repairs and equipment replacement after a failure.
Why the other options are wrong:
- B. The method of cleanup belongs to environmental consequences.
- C. Safety systems are not part of the maintenance impact.
Question 44
Reliability efforts, such as reliability centered maintenance (RCM), can be linked with RBI, resulting in an integrated program to
- A. Reduce downtime in an operating unit
- B. Reduce operating time of a unit
- C. To reduce risk by mitigation activities
Show answer and explanation ▾
Correct answer: A
Reliability efforts such as reliability centered maintenance can be linked with RBI, giving one integrated program that reduces downtime in an operating unit.
Why the other options are wrong:
- B. Reducing the operating time of a unit is the opposite of what an integrated reliability program aims for.
- C. Risk mitigation is part of RBI itself and is not the stated result of linking reliability efforts with RBI.
Get the complete API 580 bank
These 44 questions are roughly 34% of the bank. The full pack has 131 real exam questions, each with the same depth of explanation, plus a questions-only PDF for timed practice and free updates forever.
View the full API 580 question bank →
About the API 580 exam
These 44 API 580 questions are free here. The free sample PDF has 45.